* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1996, 1997 by Ralf Baechle
+ * Copyright (C) 1996, 1997, 2004, 05 by Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 2001, 2002, 2003 by Liam Davies (ldavies@agile.tv)
*
*/
-#include <linux/config.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
#include <asm/bootinfo.h>
-#include <asm/pci_channel.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/reboot.h>
#include <asm/gt64120.h>
-#include <asm/cobalt/cobalt.h>
+#include <asm/mach-cobalt/cobalt.h>
extern void cobalt_machine_restart(char *command);
extern void cobalt_machine_halt(void);
extern void cobalt_machine_power_off(void);
+extern void cobalt_early_console(void);
int cobalt_board_id;
-static char my_cmdline[CL_SIZE] = {
- "console=ttyS0,115200 "
-#ifdef CONFIG_IP_PNP
- "ip=on "
-#endif
-#ifdef CONFIG_ROOT_NFS
- "root=/dev/nfs "
-#else
- "root=/dev/hda1 "
-#endif
- };
-
const char *get_system_type(void)
{
+ switch (cobalt_board_id) {
+ case COBALT_BRD_ID_QUBE1:
+ return "Cobalt Qube";
+ case COBALT_BRD_ID_RAQ1:
+ return "Cobalt RaQ";
+ case COBALT_BRD_ID_QUBE2:
+ return "Cobalt Qube2";
+ case COBALT_BRD_ID_RAQ2:
+ return "Cobalt RaQ2";
+ }
return "MIPS Cobalt";
}
-static void __init cobalt_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
{
- /* Load timer value for 150 Hz */
- GALILEO_OUTL(500000, GT_TC0_OFS);
+ /* Load timer value for HZ (TCLK is 50MHz) */
+ GT_WRITE(GT_TC0_OFS, 50*1000*1000 / HZ);
+
+ /* Enable timer */
+ GT_WRITE(GT_TC_CONTROL_OFS, GT_TC_CONTROL_ENTC0_MSK | GT_TC_CONTROL_SELTC0_MSK);
- /* Register our timer interrupt */
- setup_irq(COBALT_TIMER_IRQ, irq);
+ /* Register interrupt */
+ setup_irq(COBALT_GALILEO_IRQ, irq);
- /* Enable timer ints */
- GALILEO_OUTL((GALILEO_ENTC0 | GALILEO_SELTC0), GT_TC_CONTROL_OFS);
- /* Unmask timer int */
- GALILEO_OUTL(0x100, GT_INTRMASK_OFS);
+ /* Enable interrupt */
+ GT_WRITE(GT_INTRMASK_OFS, GT_INTR_T0EXP_MSK | GT_READ(GT_INTRMASK_OFS));
}
extern struct pci_ops gt64111_pci_ops;
static struct resource cobalt_mem_resource = {
- "GT64111 PCI MEM", GT64111_IO_BASE, 0xffffffffUL, IORESOURCE_MEM
+ .start = GT_DEF_PCI0_MEM0_BASE,
+ .end = GT_DEF_PCI0_MEM0_BASE + GT_DEF_PCI0_MEM0_SIZE - 1,
+ .name = "PCI memory",
+ .flags = IORESOURCE_MEM
};
static struct resource cobalt_io_resource = {
- "GT64111 IO MEM", 0x00001000UL, 0x0fffffffUL, IORESOURCE_IO
+ .start = 0x1000,
+ .end = 0xffff,
+ .name = "PCI I/O",
+ .flags = IORESOURCE_IO
};
static struct resource cobalt_io_resources[] = {
- { "dma1", 0x00, 0x1f, IORESOURCE_BUSY },
- { "timer", 0x40, 0x5f, IORESOURCE_BUSY },
- { "keyboard", 0x60, 0x6f, IORESOURCE_BUSY },
- { "dma page reg", 0x80, 0x8f, IORESOURCE_BUSY },
- { "dma2", 0xc0, 0xdf, IORESOURCE_BUSY },
+ {
+ .start = 0x00,
+ .end = 0x1f,
+ .name = "dma1",
+ .flags = IORESOURCE_BUSY
+ }, {
+ .start = 0x40,
+ .end = 0x5f,
+ .name = "timer",
+ .flags = IORESOURCE_BUSY
+ }, {
+ .start = 0x60,
+ .end = 0x6f,
+ .name = "keyboard",
+ .flags = IORESOURCE_BUSY
+ }, {
+ .start = 0x80,
+ .end = 0x8f,
+ .name = "dma page reg",
+ .flags = IORESOURCE_BUSY
+ }, {
+ .start = 0xc0,
+ .end = 0xdf,
+ .name = "dma2",
+ .flags = IORESOURCE_BUSY
+ },
};
#define COBALT_IO_RESOURCES (sizeof(cobalt_io_resources)/sizeof(struct resource))
.mem_resource = &cobalt_mem_resource,
.mem_offset = 0,
.io_resource = &cobalt_io_resource,
- .io_offset = 0x00001000UL - GT64111_IO_BASE
+ .io_offset = 0 - GT_DEF_PCI0_IO_BASE,
};
-static void __init cobalt_setup(void)
+void __init plat_mem_setup(void)
{
+ static struct uart_port uart;
unsigned int devfn = PCI_DEVFN(COBALT_PCICONF_VIA, 0);
int i;
_machine_restart = cobalt_machine_restart;
_machine_halt = cobalt_machine_halt;
- _machine_power_off = cobalt_machine_power_off;
+ pm_power_off = cobalt_machine_power_off;
- board_timer_setup = cobalt_timer_setup;
+ set_io_port_base(CKSEG1ADDR(GT_DEF_PCI0_IO_BASE));
- set_io_port_base(KSEG1ADDR(GT64111_IO_BASE));
-
- /*
- * This is a prom style console. We just poke at the
- * UART to make it talk.
- * Only use this console if you really screw up and can't
- * get to the stage of setting up a real serial console.
- */
- /*ns16550_setup_console();*/
+ /* I/O port resource must include UART and LCD/buttons */
+ ioport_resource.end = 0x0fffffff;
/* request I/O space for devices used on all i[345]86 PCs */
for (i = 0; i < COBALT_IO_RESOURCES; i++)
/* Read the cobalt id register out of the PCI config space */
PCI_CFG_SET(devfn, (VIA_COBALT_BRD_ID_REG & ~0x3));
- cobalt_board_id = GALILEO_INL(GT_PCI0_CFGDATA_OFS);
+ cobalt_board_id = GT_READ(GT_PCI0_CFGDATA_OFS);
cobalt_board_id >>= ((VIA_COBALT_BRD_ID_REG & 3) * 8);
cobalt_board_id = VIA_COBALT_BRD_REG_to_ID(cobalt_board_id);
+ printk("Cobalt board ID: %d\n", cobalt_board_id);
+
#ifdef CONFIG_PCI
register_pci_controller(&cobalt_pci_controller);
#endif
-}
-early_initcall(cobalt_setup);
+#ifdef CONFIG_SERIAL_8250
+ if (cobalt_board_id > COBALT_BRD_ID_RAQ1) {
+
+#ifdef CONFIG_EARLY_PRINTK
+ cobalt_early_console();
+#endif
+
+ uart.line = 0;
+ uart.type = PORT_UNKNOWN;
+ uart.uartclk = 18432000;
+ uart.irq = COBALT_SERIAL_IRQ;
+ uart.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
+ uart.iobase = 0xc800000;
+ uart.iotype = UPIO_PORT;
+
+ early_serial_setup(&uart);
+ }
+#endif
+}
/*
* Prom init. We read our one and only communication with the firmware.
- * Grab the amount of installed memory
+ * Grab the amount of installed memory.
+ * Better boot loaders (CoLo) pass a command line too :-)
*/
void __init prom_init(void)
{
- int argc = fw_arg0;
-
- strcpy(arcs_cmdline, my_cmdline);
+ int narg, indx, posn, nchr;
+ unsigned long memsz;
+ char **argv;
mips_machgroup = MACH_GROUP_COBALT;
- add_memory_region(0x0, argc & 0x7fffffff, BOOT_MEM_RAM);
+ memsz = fw_arg0 & 0x7fff0000;
+ narg = fw_arg0 & 0x0000ffff;
+
+ if (narg) {
+ arcs_cmdline[0] = '\0';
+ argv = (char **) fw_arg1;
+ posn = 0;
+ for (indx = 1; indx < narg; ++indx) {
+ nchr = strlen(argv[indx]);
+ if (posn + 1 + nchr + 1 > sizeof(arcs_cmdline))
+ break;
+ if (posn)
+ arcs_cmdline[posn++] = ' ';
+ strcpy(arcs_cmdline + posn, argv[indx]);
+ posn += nchr;
+ }
+ }
+
+ add_memory_region(0x0, memsz, BOOT_MEM_RAM);
}
unsigned long __init prom_free_prom_memory(void)
git://git.onelab.eu / linux-2.6.git / blobdiff