*
* Copyright (C) 1994, 1995 Waldorf Electronics
* Written by Ralf Baechle and Andreas Busse
- * Copyright (C) 1994 - 99, 2003, 06 Ralf Baechle
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 Ralf Baechle
* Copyright (C) 1996 Paul M. Antoine
* Modified for DECStation and hence R3000 support by Paul M. Antoine
* Further modifications by David S. Miller and Harald Koerfgen
* Kevin Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
*/
+#include <linux/config.h>
#include <linux/init.h>
#include <linux/threads.h>
#include <asm/asm.h>
-#include <asm/asmmacro.h>
-#include <asm/irqflags.h>
#include <asm/regdef.h>
#include <asm/page.h>
#include <asm/mipsregs.h>
*/
.macro setup_c0_status set clr
.set push
-#ifdef CONFIG_MIPS_MT_SMTC
- /*
- * For SMTC, we need to set privilege and disable interrupts only for
- * the current TC, using the TCStatus register.
- */
- mfc0 t0, CP0_TCSTATUS
- /* Fortunately CU 0 is in the same place in both registers */
- /* Set TCU0, TMX, TKSU (for later inversion) and IXMT */
- li t1, ST0_CU0 | 0x08001c00
- or t0, t1
- /* Clear TKSU, leave IXMT */
- xori t0, 0x00001800
- mtc0 t0, CP0_TCSTATUS
- _ehb
- /* We need to leave the global IE bit set, but clear EXL...*/
- mfc0 t0, CP0_STATUS
- or t0, ST0_CU0 | ST0_EXL | ST0_ERL | \set | \clr
- xor t0, ST0_EXL | ST0_ERL | \clr
- mtc0 t0, CP0_STATUS
-#else
mfc0 t0, CP0_STATUS
or t0, ST0_CU0|\set|0x1f|\clr
xor t0, 0x1f|\clr
mtc0 t0, CP0_STATUS
.set noreorder
sll zero,3 # ehb
-#endif
.set pop
.endm
ARC64_TWIDDLE_PC
-#ifdef CONFIG_MIPS_MT_SMTC
- /*
- * In SMTC kernel, "CLI" is thread-specific, in TCStatus.
- * We still need to enable interrupts globally in Status,
- * and clear EXL/ERL.
- *
- * TCContext is used to track interrupt levels under
- * service in SMTC kernel. Clear for boot TC before
- * allowing any interrupts.
- */
- mtc0 zero, CP0_TCCONTEXT
-
- mfc0 t0, CP0_STATUS
- ori t0, t0, 0xff1f
- xori t0, t0, 0x001e
- mtc0 t0, CP0_STATUS
-#endif /* CONFIG_MIPS_MT_SMTC */
-
PTR_LA t0, __bss_start # clear .bss
LONG_S zero, (t0)
PTR_LA t1, __bss_stop - LONGSIZE
* function after setting up the stack and gp registers.
*/
NESTED(smp_bootstrap, 16, sp)
-#ifdef CONFIG_MIPS_MT_SMTC
- /*
- * Read-modify-writes of Status must be atomic, and this
- * is one case where CLI is invoked without EXL being
- * necessarily set. The CLI and setup_c0_status will
- * in fact be redundant for all but the first TC of
- * each VPE being booted.
- */
- DMT 10 # dmt t2 /* t0, t1 are used by CLI and setup_c0_status() */
- jal mips_ihb
-#endif /* CONFIG_MIPS_MT_SMTC */
setup_c0_status_sec
smp_slave_setup
-#ifdef CONFIG_MIPS_MT_SMTC
- andi t2, t2, VPECONTROL_TE
- beqz t2, 2f
- EMT # emt
-2:
-#endif /* CONFIG_MIPS_MT_SMTC */
j start_secondary
END(smp_bootstrap)
#endif /* CONFIG_SMP */