#include <asm/ptrace.h>
#include <linux/sched.h>
#include <linux/kernel_stat.h>
+#include <asm/gt64240.h>
#include <asm/io.h>
-#include "gt64240.h"
unsigned long bus_clock;
* we keep this particular structure in the function.
*/
-static void gt64240_p0int_irq(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t gt64240_p0int_irq(int irq, void *dev, struct pt_regs *regs)
{
uint32_t irq_src, irq_src_mask;
int handled;
/* get the low interrupt cause register */
- GT_READ(LOW_INTERRUPT_CAUSE_REGISTER, &irq_src);
+ irq_src = MV_READ(LOW_INTERRUPT_CAUSE_REGISTER);
/* get the mask register for this pin */
- GT_READ(PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, &irq_src_mask);
+ irq_src_mask = MV_READ(PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW);
/* mask off only the interrupts we're interested in */
irq_src = irq_src & irq_src_mask;
- handled = 0;
+ handled = IRQ_NONE;
/* Check for timer interrupt */
if (irq_src & 0x00000100) {
- handled = 1;
+ handled = IRQ_HANDLED;
irq_src &= ~0x00000100;
/* Clear any pending cause bits */
- GT_WRITE(TIMER_COUNTER_0_3_INTERRUPT_CAUSE, 0x0);
+ MV_WRITE(TIMER_COUNTER_0_3_INTERRUPT_CAUSE, 0x0);
/* handle the timer call */
do_timer(regs);
"UNKNOWN P0_INT# interrupt received, irq_src=0x%x\n",
irq_src);
}
-}
-
-/*
- * Interrupt handler for interrupts coming from the Galileo chip.
- * It could be built in ethernet ports etc...
- */
-static void gt64240_irq(int irq, void *dev_id, struct pt_regs *regs)
-{
- unsigned int irq_src, int_high_src, irq_src_mask,
- int_high_src_mask;
- int handled;
-
-#if 0
- GT_READ(GT_INTRCAUSE_OFS, &irq_src);
- GT_READ(GT_INTRMASK_OFS, &irq_src_mask);
- GT_READ(GT_HINTRCAUSE_OFS, &int_high_src);
- GT_READ(GT_HINTRMASK_OFS, &int_high_src_mask);
-#endif
- irq_src = irq_src & irq_src_mask;
- int_high_src = int_high_src & int_high_src_mask;
-
- handled = 0;
-
- /* Execute all interrupt handlers */
- /* Check for timer interrupt */
- if (irq_src & 0x00000800) {
- handled = 1;
- irq_src &= ~0x00000800;
- // RESET_REG_BITS (INTERRUPT_CAUSE_REGISTER,BIT8);
- do_timer(regs);
- }
-
- if (irq_src) {
- printk(KERN_INFO
- "Other Galileo interrupt received irq_src %x\n",
- irq_src);
-#if CURRENTLY_UNUSED
- for (count = 0; count < MAX_CAUSE_REG_WIDTH; count++) {
- if (irq_src & (1 << count)) {
- if (irq_handlers[INT_CAUSE_MAIN][count].
- routine) {
- queue_task(&irq_handlers
- [INT_CAUSE_MAIN][count],
- &tq_immediate);
- mark_bh(IMMEDIATE_BH);
- handled = 1;
- }
- }
- }
-#endif /* UNUSED */
- }
-#if 0
- GT_WRITE(GT_INTRCAUSE_OFS, 0);
- GT_WRITE(GT_HINTRCAUSE_OFS, 0);
-#endif
-#undef GALILEO_I2O
-#ifdef GALILEO_I2O
- /*
- * Future I2O support. We currently attach I2O interrupt handlers to
- * the Galileo interrupt (int 4) and handle them in do_IRQ.
- */
- if (isInBoundDoorBellInterruptSet()) {
- printk(KERN_INFO "I2O doorbell interrupt received.\n");
- handled = 1;
- }
-
- if (isInBoundPostQueueInterruptSet()) {
- printk(KERN_INFO "I2O Queue interrupt received.\n");
- handled = 1;
- }
-
- /*
- * This normally would be outside of the ifdef, but since we're
- * handling I2O outside of this handler, this printk shows up every
- * time we get a valid I2O interrupt. So turn this off for now.
- */
- if (handled == 0) {
- if (counter < 50) {
- printk("Spurious Galileo interrupt...\n");
- counter++;
- }
- }
-#endif
+ return handled;
}
/*
static struct irqaction timer;
/* Stop the timer -- we'll use timer #0 */
- GT_WRITE(TIMER_COUNTER_0_3_CONTROL, 0x0);
+ MV_WRITE(TIMER_COUNTER_0_3_CONTROL, 0x0);
/* Load timer value for 100 Hz */
- GT_WRITE(TIMER_COUNTER0, bus_clock / 100);
+ MV_WRITE(TIMER_COUNTER0, bus_clock / 100);
/*
* Create the IRQ structure entry for the timer. Since we're too early
enable_irq(6);
/* Clear any pending cause bits */
- GT_WRITE(TIMER_COUNTER_0_3_INTERRUPT_CAUSE, 0x0);
+ MV_WRITE(TIMER_COUNTER_0_3_INTERRUPT_CAUSE, 0x0);
/* Enable the interrupt for timer 0 */
- GT_WRITE(TIMER_COUNTER_0_3_INTERRUPT_MASK, 0x1);
+ MV_WRITE(TIMER_COUNTER_0_3_INTERRUPT_MASK, 0x1);
/* Enable the timer interrupt for GT-64240 pin P0_INT# */
- GT_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0x100);
+ MV_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0x100);
/* Configure and start the timer */
- GT_WRITE(TIMER_COUNTER_0_3_CONTROL, 0x3);
+ MV_WRITE(TIMER_COUNTER_0_3_CONTROL, 0x3);
}
void gt64240_irq_init(void)