--- /dev/null
+# Makefile for making ELF bootable images for booting on CHRP
+# using Open Firmware.
+#
+# Geert Uytterhoeven September 1997
+#
+# Based on coffboot by Paul Mackerras
+# Simplified for ppc64 by Todd Inglett
+#
+# NOTE: this code is built for 32 bit in ELF32 format even though
+# it packages a 64 bit kernel. We do this to simplify the
+# bootloader and increase compatibility with OpenFirmware.
+#
+# To this end we need to define BOOTCC, etc, as the tools
+# needed to build the 32 bit image. These are normally HOSTCC,
+# but may be a third compiler if, for example, you are cross
+# compiling from an intel box. Once the 64bit ppc gcc is
+# stable it will probably simply be a compiler switch to
+# compile for 32bit mode.
+# To make it easier to setup a cross compiler,
+# CROSS32_COMPILE is setup as a prefix just like CROSS_COMPILE
+# in the toplevel makefile.
+
+
+HOSTCC := gcc
+BOOTCFLAGS := $(HOSTCFLAGS) -fno-builtin -nostdinc -isystem \
+ $(shell $(CROSS32CC) -print-file-name=include) -fPIC
+BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc
+OBJCOPYFLAGS := contents,alloc,load,readonly,data
+OBJCOPY_COFF_ARGS := -O aixcoff-rs6000 --set-start 0x500000
+OBJCOPY_MIB_ARGS := -O aixcoff-rs6000 -R .stab -R .stabstr -R .comment
+
+zlib := infblock.c infcodes.c inffast.c inflate.c inftrees.c infutil.c
+zlibheader := infblock.h infcodes.h inffast.h inftrees.h infutil.h
+zliblinuxheader := zlib.h zconf.h zutil.h
+
+$(addprefix $(obj)/,$(zlib) main.o): $(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
+#$(addprefix $(obj)/,main.o): $(addprefix $(obj)/,zlib.h)
+
+src-boot := crt0.S string.S prom.c stdio.c main.c div64.S
+src-boot += $(zlib)
+src-boot := $(addprefix $(obj)/, $(src-boot))
+obj-boot := $(addsuffix .o, $(basename $(src-boot)))
+
+BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj)
+
+quiet_cmd_copy_zlib = COPY $@
+ cmd_copy_zlib = sed "s@__attribute_used__@@;s@<linux/\([^>]\+\).*@\"\1\"@" $< > $@
+
+quiet_cmd_copy_zlibheader = COPY $@
+ cmd_copy_zlibheader = sed "s@<linux/\([^>]\+\).*@\"\1\"@" $< > $@
+# stddef.h for NULL
+quiet_cmd_copy_zliblinuxheader = COPY $@
+ cmd_copy_zliblinuxheader = sed "s@<linux/string.h>@\"string.h\"@;s@<linux/kernel.h>@<stddef.h>@;s@<linux/\([^>]\+\).*@\"\1\"@" $< > $@
+
+$(addprefix $(obj)/,$(zlib)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
+ $(call cmd,copy_zlib)
+
+$(addprefix $(obj)/,$(zlibheader)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
+ $(call cmd,copy_zlibheader)
+
+$(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/%
+ $(call cmd,copy_zliblinuxheader)
+
+clean-files := $(zlib) $(zlibheader) $(zliblinuxheader)
+
+
+quiet_cmd_bootcc = BOOTCC $@
+ cmd_bootcc = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $<
+
+quiet_cmd_bootas = BOOTAS $@
+ cmd_bootas = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $<
+
+quiet_cmd_bootld = BOOTLD $@
+ cmd_bootld = $(CROSS32LD) -T $(srctree)/$(src)/$(3) -o $@ $(2)
+
+$(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c
+ $(call if_changed_dep,bootcc)
+$(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S
+ $(call if_changed_dep,bootas)
+
+#-----------------------------------------------------------
+# ELF sections within the zImage bootloader/wrapper
+#-----------------------------------------------------------
+required := vmlinux.strip
+initrd := initrd
+
+obj-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.o, $(section)))
+src-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.c, $(section)))
+gz-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.gz, $(section)))
+
+hostprogs-y := addnote addRamDisk hack-coff
+
+targets += zImage.vmode zImage.initrd.vmode zImage zImage.initrd \
+ zImage.coff zImage.initrd.coff miboot.image miboot.initrd.image \
+ $(patsubst $(obj)/%,%, $(call obj-sec, $(required) $(initrd))) \
+ $(patsubst $(obj)/%,%, $(call src-sec, $(required) $(initrd))) \
+ $(patsubst $(obj)/%,%, $(call gz-sec, $(required) $(initrd))) \
+ vmlinux.initrd dummy.o
+extra-y := initrd.o
+
+quiet_cmd_ramdisk = RAMDISK $@
+ cmd_ramdisk = $(obj)/addRamDisk $(obj)/ramdisk.image.gz $< $@
+
+quiet_cmd_stripvm = STRIP $@
+ cmd_stripvm = $(STRIP) -s -R .comment $< -o $@
+
+vmlinux.strip: vmlinux
+ $(call if_changed,stripvm)
+$(obj)/vmlinux.initrd: vmlinux.strip $(obj)/addRamDisk $(obj)/ramdisk.image.gz
+ $(call if_changed,ramdisk)
+
+quiet_cmd_addsection = ADDSEC $@
+ cmd_addsection = $(CROSS32OBJCOPY) $@ \
+ --add-section=.kernel:$(strip $(patsubst $(obj)/kernel-%.o,%, $@))=$(patsubst %.o,%.gz, $@) \
+ --set-section-flags=.kernel:$(strip $(patsubst $(obj)/kernel-%.o,%, $@))=$(OBJCOPYFLAGS)
+
+quiet_cmd_addnote = ADDNOTE $@
+ cmd_addnote = $(obj)/addnote $@
+
+quiet_cmd_gen-miboot = GEN $@
+ cmd_gen-miboot = $(OBJCOPY) $(OBJCOPY_MIB_ARGS) \
+ --add-section=$1=$(word 2, $^) $< $@
+
+quiet_cmd_gencoff = COFF $@
+ cmd_gencoff = $(OBJCOPY) $(OBJCOPY_COFF_ARGS) $@ && \
+ $(obj)/hack-coff $@
+
+$(call gz-sec, $(required)): $(obj)/kernel-%.gz: %
+ $(call if_changed,gzip)
+
+$(obj)/kernel-initrd.gz: $(obj)/ramdisk.image.gz
+ cp -f $(obj)/ramdisk.image.gz $@
+
+$(call src-sec, $(required) $(initrd)): $(obj)/kernel-%.c: $(obj)/kernel-%.gz
+ @touch $@
+
+$(call obj-sec, $(required) $(initrd)): $(obj)/kernel-%.o: $(obj)/kernel-%.c
+ $(call if_changed_dep,bootcc)
+ $(call cmd,addsection)
+
+$(obj)/zImage.vmode $(obj)/zImage.coff: obj-boot += $(call obj-sec, $(required))
+$(obj)/zImage.vmode: $(call obj-sec, $(required)) $(obj-boot) $(srctree)/$(src)/zImage.lds
+ $(call cmd,bootld,$(obj-boot),zImage.lds)
+
+$(obj)/zImage.initrd.vmode $(obj)/zImage.initrd.coff: obj-boot += $(call obj-sec, $(required) $(initrd))
+$(obj)/zImage.initrd.vmode: $(call obj-sec, $(required) $(initrd)) $(obj-boot) $(srctree)/$(src)/zImage.lds
+ $(call cmd,bootld,$(obj-boot),zImage.lds)
+
+# For 32-bit powermacs, build the COFF and miboot images
+# as well as the ELF images.
+coffimage-$(CONFIG_PPC_PMAC)-$(CONFIG_PPC32) := $(obj)/zImage.coff
+coffrdimg-$(CONFIG_PPC_PMAC)-$(CONFIG_PPC32) := $(obj)/zImage.initrd.coff
+mibootimg-$(CONFIG_PPC_PMAC)-$(CONFIG_PPC32) := $(obj)/miboot.image
+mibrdimg-$(CONFIG_PPC_PMAC)-$(CONFIG_PPC32) := $(obj)/miboot.initrd.image
+
+$(obj)/zImage: $(obj)/zImage.vmode $(obj)/addnote $(coffimage-y-y) \
+ $(mibootimg-y-y)
+ @cp -f $< $@
+ $(call if_changed,addnote)
+
+$(obj)/zImage.initrd: $(obj)/zImage.initrd.vmode $(obj)/addnote \
+ $(coffrdimg-y-y) $(mibrdimg-y-y)
+ @cp -f $< $@
+ $(call if_changed,addnote)
+
+$(obj)/zImage.coff: $(call obj-sec, $(required)) $(obj-boot) \
+ $(srctree)/$(src)/zImage.coff.lds $(obj)/hack-coff
+ $(call cmd,bootld,$(obj-boot),zImage.coff.lds)
+ $(call cmd,gencoff)
+
+$(obj)/zImage.initrd.coff: $(call obj-sec, $(required) $(initrd)) $(obj-boot) \
+ $(srctree)/$(src)/zImage.coff.lds $(obj)/hack-coff
+ $(call cmd,bootld,$(obj-boot),zImage.coff.lds)
+ $(call cmd,gencoff)
+
+$(obj)/miboot.image: $(obj)/dummy.o $(obj)/vmlinux.gz
+ $(call cmd,gen-miboot,image)
+
+$(obj)/miboot.initrd.image: $(obj)/miboot.image $(images)/ramdisk.image.gz
+ $(call cmd,gen-miboot,initrd)
+
+#-----------------------------------------------------------
+# build u-boot images
+#-----------------------------------------------------------
+quiet_cmd_mygzip = GZIP $@
+cmd_mygzip = gzip -f -9 < $< > $@.$$$$ && mv $@.$$$$ $@
+
+quiet_cmd_objbin = OBJCOPY $@
+ cmd_objbin = $(OBJCOPY) -O binary $< $@
+
+quiet_cmd_uimage = UIMAGE $@
+ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A ppc -O linux -T kernel \
+ -C gzip -a 00000000 -e 00000000 -n 'Linux-$(KERNELRELEASE)' \
+ -d $< $@
+
+MKIMAGE := $(srctree)/scripts/mkuboot.sh
+targets += uImage
+extra-y += vmlinux.bin vmlinux.gz
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+ $(call if_changed,objbin)
+
+$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,mygzip)
+
+$(obj)/uImage: $(obj)/vmlinux.gz
+ $(Q)rm -f $@
+ $(call cmd,uimage)
+ @echo -n ' Image: $@ '
+ @if [ -f $@ ]; then echo 'is ready' ; else echo 'not made'; fi
+
+install: $(CONFIGURE) $(BOOTIMAGE)
+ sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" "$(BOOTIMAGE)"
+
+clean-files += $(addprefix $(objtree)/, $(obj-boot) vmlinux.strip)
git://git.onelab.eu / linux-2.6.git / blobdiff