--- /dev/null
+/*
+ * Common prep/pmac/chrp boot and setup code.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/delay.h>
+#include <linux/initrd.h>
+#include <linux/ide.h>
+#include <linux/tty.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/cpu.h>
+#include <linux/console.h>
+
+#include <asm/residual.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/processor.h>
+#include <asm/pgtable.h>
+#include <asm/setup.h>
+#include <asm/amigappc.h>
+#include <asm/smp.h>
+#include <asm/elf.h>
+#include <asm/cputable.h>
+#include <asm/bootx.h>
+#include <asm/btext.h>
+#include <asm/machdep.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/pmac_feature.h>
+#include <asm/sections.h>
+#include <asm/nvram.h>
+#include <asm/xmon.h>
+#include <asm/time.h>
+#include <asm/serial.h>
+#include <asm/udbg.h>
+
+#include "setup.h"
+
+#define DBG(fmt...)
+
+#if defined CONFIG_KGDB
+#include <asm/kgdb.h>
+#endif
+
+extern void bootx_init(unsigned long r4, unsigned long phys);
+
+boot_infos_t *boot_infos;
+struct ide_machdep_calls ppc_ide_md;
+
+int boot_cpuid;
+EXPORT_SYMBOL_GPL(boot_cpuid);
+int boot_cpuid_phys;
+
+unsigned long ISA_DMA_THRESHOLD;
+unsigned int DMA_MODE_READ;
+unsigned int DMA_MODE_WRITE;
+
+int have_of = 1;
+
+#ifdef CONFIG_PPC_MULTIPLATFORM
+dev_t boot_dev;
+#endif /* CONFIG_PPC_MULTIPLATFORM */
+
+#ifdef CONFIG_MAGIC_SYSRQ
+unsigned long SYSRQ_KEY = 0x54;
+#endif /* CONFIG_MAGIC_SYSRQ */
+
+#ifdef CONFIG_VGA_CONSOLE
+unsigned long vgacon_remap_base;
+#endif
+
+/*
+ * These are used in binfmt_elf.c to put aux entries on the stack
+ * for each elf executable being started.
+ */
+int dcache_bsize;
+int icache_bsize;
+int ucache_bsize;
+
+/*
+ * We're called here very early in the boot. We determine the machine
+ * type and call the appropriate low-level setup functions.
+ * -- Cort <cort@fsmlabs.com>
+ *
+ * Note that the kernel may be running at an address which is different
+ * from the address that it was linked at, so we must use RELOC/PTRRELOC
+ * to access static data (including strings). -- paulus
+ */
+unsigned long __init early_init(unsigned long dt_ptr)
+{
+ unsigned long offset = reloc_offset();
+
+ /* First zero the BSS -- use memset_io, some platforms don't have
+ * caches on yet */
+ memset_io((void __iomem *)PTRRELOC(&__bss_start), 0, _end - __bss_start);
+
+ /*
+ * Identify the CPU type and fix up code sections
+ * that depend on which cpu we have.
+ */
+ identify_cpu(offset, 0);
+ do_cpu_ftr_fixups(offset);
+
+ return KERNELBASE + offset;
+}
+
+
+/*
+ * Find out what kind of machine we're on and save any data we need
+ * from the early boot process (devtree is copied on pmac by prom_init()).
+ * This is called very early on the boot process, after a minimal
+ * MMU environment has been set up but before MMU_init is called.
+ */
+void __init machine_init(unsigned long dt_ptr, unsigned long phys)
+{
+ /* If btext is enabled, we might have a BAT setup for early display,
+ * thus we do enable some very basic udbg output
+ */
+#ifdef CONFIG_BOOTX_TEXT
+ udbg_putc = btext_drawchar;
+#endif
+
+ /* Do some early initialization based on the flat device tree */
+ early_init_devtree(__va(dt_ptr));
+
+ /* Check default command line */
+#ifdef CONFIG_CMDLINE
+ if (cmd_line[0] == 0)
+ strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line));
+#endif /* CONFIG_CMDLINE */
+
+ probe_machine();
+
+#ifdef CONFIG_6xx
+ if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
+ cpu_has_feature(CPU_FTR_CAN_NAP))
+ ppc_md.power_save = ppc6xx_idle;
+#endif
+
+ if (ppc_md.progress)
+ ppc_md.progress("id mach(): done", 0x200);
+}
+
+#ifdef CONFIG_BOOKE_WDT
+/* Checks wdt=x and wdt_period=xx command-line option */
+int __init early_parse_wdt(char *p)
+{
+ if (p && strncmp(p, "0", 1) != 0)
+ booke_wdt_enabled = 1;
+
+ return 0;
+}
+early_param("wdt", early_parse_wdt);
+
+int __init early_parse_wdt_period (char *p)
+{
+ if (p)
+ booke_wdt_period = simple_strtoul(p, NULL, 0);
+
+ return 0;
+}
+early_param("wdt_period", early_parse_wdt_period);
+#endif /* CONFIG_BOOKE_WDT */
+
+/* Checks "l2cr=xxxx" command-line option */
+int __init ppc_setup_l2cr(char *str)
+{
+ if (cpu_has_feature(CPU_FTR_L2CR)) {
+ unsigned long val = simple_strtoul(str, NULL, 0);
+ printk(KERN_INFO "l2cr set to %lx\n", val);
+ _set_L2CR(0); /* force invalidate by disable cache */
+ _set_L2CR(val); /* and enable it */
+ }
+ return 1;
+}
+__setup("l2cr=", ppc_setup_l2cr);
+
+#ifdef CONFIG_GENERIC_NVRAM
+
+/* Generic nvram hooks used by drivers/char/gen_nvram.c */
+unsigned char nvram_read_byte(int addr)
+{
+ if (ppc_md.nvram_read_val)
+ return ppc_md.nvram_read_val(addr);
+ return 0xff;
+}
+EXPORT_SYMBOL(nvram_read_byte);
+
+void nvram_write_byte(unsigned char val, int addr)
+{
+ if (ppc_md.nvram_write_val)
+ ppc_md.nvram_write_val(addr, val);
+}
+EXPORT_SYMBOL(nvram_write_byte);
+
+void nvram_sync(void)
+{
+ if (ppc_md.nvram_sync)
+ ppc_md.nvram_sync();
+}
+EXPORT_SYMBOL(nvram_sync);
+
+#endif /* CONFIG_NVRAM */
+
+static struct cpu cpu_devices[NR_CPUS];
+
+int __init ppc_init(void)
+{
+ int i;
+
+ /* clear the progress line */
+ if ( ppc_md.progress ) ppc_md.progress(" ", 0xffff);
+
+ /* register CPU devices */
+ for_each_possible_cpu(i)
+ register_cpu(&cpu_devices[i], i, NULL);
+
+ /* call platform init */
+ if (ppc_md.init != NULL) {
+ ppc_md.init();
+ }
+ return 0;
+}
+
+arch_initcall(ppc_init);
+
+/* Warning, IO base is not yet inited */
+void __init setup_arch(char **cmdline_p)
+{
+ extern void do_init_bootmem(void);
+
+ /* so udelay does something sensible, assume <= 1000 bogomips */
+ loops_per_jiffy = 500000000 / HZ;
+
+ unflatten_device_tree();
+ check_for_initrd();
+
+ if (ppc_md.init_early)
+ ppc_md.init_early();
+
+ find_legacy_serial_ports();
+ finish_device_tree();
+
+ smp_setup_cpu_maps();
+
+#ifdef CONFIG_XMON_DEFAULT
+ xmon_init(1);
+#endif
+ /* Register early console */
+ register_early_udbg_console();
+
+#if defined(CONFIG_KGDB)
+ if (ppc_md.kgdb_map_scc)
+ ppc_md.kgdb_map_scc();
+ set_debug_traps();
+ if (strstr(cmd_line, "gdb")) {
+ if (ppc_md.progress)
+ ppc_md.progress("setup_arch: kgdb breakpoint", 0x4000);
+ printk("kgdb breakpoint activated\n");
+ breakpoint();
+ }
+#endif
+
+ /*
+ * Set cache line size based on type of cpu as a default.
+ * Systems with OF can look in the properties on the cpu node(s)
+ * for a possibly more accurate value.
+ */
+ if (cpu_has_feature(CPU_FTR_SPLIT_ID_CACHE)) {
+ dcache_bsize = cur_cpu_spec->dcache_bsize;
+ icache_bsize = cur_cpu_spec->icache_bsize;
+ ucache_bsize = 0;
+ } else
+ ucache_bsize = dcache_bsize = icache_bsize
+ = cur_cpu_spec->dcache_bsize;
+
+ /* reboot on panic */
+ panic_timeout = 180;
+
+ init_mm.start_code = PAGE_OFFSET;
+ init_mm.end_code = (unsigned long) _etext;
+ init_mm.end_data = (unsigned long) _edata;
+ init_mm.brk = klimit;
+
+ /* Save unparsed command line copy for /proc/cmdline */
+ strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE);
+ *cmdline_p = cmd_line;
+
+ parse_early_param();
+
+ /* set up the bootmem stuff with available memory */
+ do_init_bootmem();
+ if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab);
+
+#ifdef CONFIG_DUMMY_CONSOLE
+ conswitchp = &dummy_con;
+#endif
+
+ ppc_md.setup_arch();
+ if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
+
+ paging_init();
+}