--- /dev/null
+/*
+ * $Id: hashtable.S,v 1.6 1999/10/08 01:56:15 paulus Exp $
+ *
+ * PowerPC version
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
+ * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
+ * Adapted for Power Macintosh by Paul Mackerras.
+ * Low-level exception handlers and MMU support
+ * rewritten by Paul Mackerras.
+ * Copyright (C) 1996 Paul Mackerras.
+ *
+ * This file contains low-level assembler routines for managing
+ * the PowerPC MMU hash table. (PPC 8xx processors don't use a
+ * hash table, so this file is not used on them.)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/cputable.h>
+#include <asm/ppc_asm.h>
+#include <asm/thread_info.h>
+#include <asm/asm-offsets.h>
+
+#ifdef CONFIG_SMP
+ .comm mmu_hash_lock,4
+#endif /* CONFIG_SMP */
+
+/*
+ * Sync CPUs with hash_page taking & releasing the hash
+ * table lock
+ */
+#ifdef CONFIG_SMP
+ .text
+_GLOBAL(hash_page_sync)
+ lis r8,mmu_hash_lock@h
+ ori r8,r8,mmu_hash_lock@l
+ lis r0,0x0fff
+ b 10f
+11: lwz r6,0(r8)
+ cmpwi 0,r6,0
+ bne 11b
+10: lwarx r6,0,r8
+ cmpwi 0,r6,0
+ bne- 11b
+ stwcx. r0,0,r8
+ bne- 10b
+ isync
+ eieio
+ li r0,0
+ stw r0,0(r8)
+ blr
+#endif
+
+/*
+ * Load a PTE into the hash table, if possible.
+ * The address is in r4, and r3 contains an access flag:
+ * _PAGE_RW (0x400) if a write.
+ * r9 contains the SRR1 value, from which we use the MSR_PR bit.
+ * SPRG3 contains the physical address of the current task's thread.
+ *
+ * Returns to the caller if the access is illegal or there is no
+ * mapping for the address. Otherwise it places an appropriate PTE
+ * in the hash table and returns from the exception.
+ * Uses r0, r3 - r8, ctr, lr.
+ */
+ .text
+_GLOBAL(hash_page)
+#ifdef CONFIG_PPC64BRIDGE
+ mfmsr r0
+ clrldi r0,r0,1 /* make sure it's in 32-bit mode */
+ MTMSRD(r0)
+ isync
+#endif
+ tophys(r7,0) /* gets -KERNELBASE into r7 */
+#ifdef CONFIG_SMP
+ addis r8,r7,mmu_hash_lock@h
+ ori r8,r8,mmu_hash_lock@l
+ lis r0,0x0fff
+ b 10f
+11: lwz r6,0(r8)
+ cmpwi 0,r6,0
+ bne 11b
+10: lwarx r6,0,r8
+ cmpwi 0,r6,0
+ bne- 11b
+ stwcx. r0,0,r8
+ bne- 10b
+ isync
+#endif
+ /* Get PTE (linux-style) and check access */
+ lis r0,KERNELBASE@h /* check if kernel address */
+ cmplw 0,r4,r0
+ mfspr r8,SPRN_SPRG3 /* current task's THREAD (phys) */
+ ori r3,r3,_PAGE_USER|_PAGE_PRESENT /* test low addresses as user */
+ lwz r5,PGDIR(r8) /* virt page-table root */
+ blt+ 112f /* assume user more likely */
+ lis r5,swapper_pg_dir@ha /* if kernel address, use */
+ addi r5,r5,swapper_pg_dir@l /* kernel page table */
+ rlwimi r3,r9,32-12,29,29 /* MSR_PR -> _PAGE_USER */
+112: add r5,r5,r7 /* convert to phys addr */
+ rlwimi r5,r4,12,20,29 /* insert top 10 bits of address */
+ lwz r8,0(r5) /* get pmd entry */
+ rlwinm. r8,r8,0,0,19 /* extract address of pte page */
+#ifdef CONFIG_SMP
+ beq- hash_page_out /* return if no mapping */
+#else
+ /* XXX it seems like the 601 will give a machine fault on the
+ rfi if its alignment is wrong (bottom 4 bits of address are
+ 8 or 0xc) and we have had a not-taken conditional branch
+ to the address following the rfi. */
+ beqlr-
+#endif
+ rlwimi r8,r4,22,20,29 /* insert next 10 bits of address */
+ rlwinm r0,r3,32-3,24,24 /* _PAGE_RW access -> _PAGE_DIRTY */
+ ori r0,r0,_PAGE_ACCESSED|_PAGE_HASHPTE
+
+ /*
+ * Update the linux PTE atomically. We do the lwarx up-front
+ * because almost always, there won't be a permission violation
+ * and there won't already be an HPTE, and thus we will have
+ * to update the PTE to set _PAGE_HASHPTE. -- paulus.
+ */
+retry:
+ lwarx r6,0,r8 /* get linux-style pte */
+ andc. r5,r3,r6 /* check access & ~permission */
+#ifdef CONFIG_SMP
+ bne- hash_page_out /* return if access not permitted */
+#else
+ bnelr-
+#endif
+ or r5,r0,r6 /* set accessed/dirty bits */
+ stwcx. r5,0,r8 /* attempt to update PTE */
+ bne- retry /* retry if someone got there first */
+
+ mfsrin r3,r4 /* get segment reg for segment */
+ mfctr r0
+ stw r0,_CTR(r11)
+ bl create_hpte /* add the hash table entry */
+
+#ifdef CONFIG_SMP
+ eieio
+ addis r8,r7,mmu_hash_lock@ha
+ li r0,0
+ stw r0,mmu_hash_lock@l(r8)
+#endif
+
+ /* Return from the exception */
+ lwz r5,_CTR(r11)
+ mtctr r5
+ lwz r0,GPR0(r11)
+ lwz r7,GPR7(r11)
+ lwz r8,GPR8(r11)
+ b fast_exception_return
+
+#ifdef CONFIG_SMP
+hash_page_out:
+ eieio
+ addis r8,r7,mmu_hash_lock@ha
+ li r0,0
+ stw r0,mmu_hash_lock@l(r8)
+ blr
+#endif /* CONFIG_SMP */
+
+/*
+ * Add an entry for a particular page to the hash table.
+ *
+ * add_hash_page(unsigned context, unsigned long va, unsigned long pmdval)
+ *
+ * We assume any necessary modifications to the pte (e.g. setting
+ * the accessed bit) have already been done and that there is actually
+ * a hash table in use (i.e. we're not on a 603).
+ */
+_GLOBAL(add_hash_page)
+ mflr r0
+ stw r0,4(r1)
+
+ /* Convert context and va to VSID */
+ mulli r3,r3,897*16 /* multiply context by context skew */
+ rlwinm r0,r4,4,28,31 /* get ESID (top 4 bits of va) */
+ mulli r0,r0,0x111 /* multiply by ESID skew */
+ add r3,r3,r0 /* note create_hpte trims to 24 bits */
+
+#ifdef CONFIG_SMP
+ rlwinm r8,r1,0,0,18 /* use cpu number to make tag */
+ lwz r8,TI_CPU(r8) /* to go in mmu_hash_lock */
+ oris r8,r8,12
+#endif /* CONFIG_SMP */
+
+ /*
+ * We disable interrupts here, even on UP, because we don't
+ * want to race with hash_page, and because we want the
+ * _PAGE_HASHPTE bit to be a reliable indication of whether
+ * the HPTE exists (or at least whether one did once).
+ * We also turn off the MMU for data accesses so that we
+ * we can't take a hash table miss (assuming the code is
+ * covered by a BAT). -- paulus
+ */
+ mfmsr r10
+ SYNC
+ rlwinm r0,r10,0,17,15 /* clear bit 16 (MSR_EE) */
+ rlwinm r0,r0,0,28,26 /* clear MSR_DR */
+ mtmsr r0
+ SYNC_601
+ isync
+
+ tophys(r7,0)
+
+#ifdef CONFIG_SMP
+ addis r9,r7,mmu_hash_lock@ha
+ addi r9,r9,mmu_hash_lock@l
+10: lwarx r0,0,r9 /* take the mmu_hash_lock */
+ cmpi 0,r0,0
+ bne- 11f
+ stwcx. r8,0,r9
+ beq+ 12f
+11: lwz r0,0(r9)
+ cmpi 0,r0,0
+ beq 10b
+ b 11b
+12: isync
+#endif
+
+ /*
+ * Fetch the linux pte and test and set _PAGE_HASHPTE atomically.
+ * If _PAGE_HASHPTE was already set, we don't replace the existing
+ * HPTE, so we just unlock and return.
+ */
+ mr r8,r5
+ rlwimi r8,r4,22,20,29
+1: lwarx r6,0,r8
+ andi. r0,r6,_PAGE_HASHPTE
+ bne 9f /* if HASHPTE already set, done */
+ ori r5,r6,_PAGE_HASHPTE
+ stwcx. r5,0,r8
+ bne- 1b
+
+ bl create_hpte
+
+9:
+#ifdef CONFIG_SMP
+ eieio
+ li r0,0
+ stw r0,0(r9) /* clear mmu_hash_lock */
+#endif
+
+ /* reenable interrupts and DR */
+ mtmsr r10
+ SYNC_601
+ isync
+
+ lwz r0,4(r1)
+ mtlr r0
+ blr
+
+/*
+ * This routine adds a hardware PTE to the hash table.
+ * It is designed to be called with the MMU either on or off.
+ * r3 contains the VSID, r4 contains the virtual address,
+ * r5 contains the linux PTE, r6 contains the old value of the
+ * linux PTE (before setting _PAGE_HASHPTE) and r7 contains the
+ * offset to be added to addresses (0 if the MMU is on,
+ * -KERNELBASE if it is off).
+ * On SMP, the caller should have the mmu_hash_lock held.
+ * We assume that the caller has (or will) set the _PAGE_HASHPTE
+ * bit in the linux PTE in memory. The value passed in r6 should
+ * be the old linux PTE value; if it doesn't have _PAGE_HASHPTE set
+ * this routine will skip the search for an existing HPTE.
+ * This procedure modifies r0, r3 - r6, r8, cr0.
+ * -- paulus.
+ *
+ * For speed, 4 of the instructions get patched once the size and
+ * physical address of the hash table are known. These definitions
+ * of Hash_base and Hash_bits below are just an example.
+ */
+Hash_base = 0xc0180000
+Hash_bits = 12 /* e.g. 256kB hash table */
+Hash_msk = (((1 << Hash_bits) - 1) * 64)
+
+#ifndef CONFIG_PPC64BRIDGE
+/* defines for the PTE format for 32-bit PPCs */
+#define PTE_SIZE 8
+#define PTEG_SIZE 64
+#define LG_PTEG_SIZE 6
+#define LDPTEu lwzu
+#define STPTE stw
+#define CMPPTE cmpw
+#define PTE_H 0x40
+#define PTE_V 0x80000000
+#define TST_V(r) rlwinm. r,r,0,0,0
+#define SET_V(r) oris r,r,PTE_V@h
+#define CLR_V(r,t) rlwinm r,r,0,1,31
+
+#else
+/* defines for the PTE format for 64-bit PPCs */
+#define PTE_SIZE 16
+#define PTEG_SIZE 128
+#define LG_PTEG_SIZE 7
+#define LDPTEu ldu
+#define STPTE std
+#define CMPPTE cmpd
+#define PTE_H 2
+#define PTE_V 1
+#define TST_V(r) andi. r,r,PTE_V
+#define SET_V(r) ori r,r,PTE_V
+#define CLR_V(r,t) li t,PTE_V; andc r,r,t
+#endif /* CONFIG_PPC64BRIDGE */
+
+#define HASH_LEFT 31-(LG_PTEG_SIZE+Hash_bits-1)
+#define HASH_RIGHT 31-LG_PTEG_SIZE
+
+_GLOBAL(create_hpte)
+ /* Convert linux-style PTE (r5) to low word of PPC-style PTE (r8) */
+ rlwinm r8,r5,32-10,31,31 /* _PAGE_RW -> PP lsb */
+ rlwinm r0,r5,32-7,31,31 /* _PAGE_DIRTY -> PP lsb */
+ and r8,r8,r0 /* writable if _RW & _DIRTY */
+ rlwimi r5,r5,32-1,30,30 /* _PAGE_USER -> PP msb */
+ rlwimi r5,r5,32-2,31,31 /* _PAGE_USER -> PP lsb */
+ ori r8,r8,0xe14 /* clear out reserved bits and M */
+ andc r8,r5,r8 /* PP = user? (rw&dirty? 2: 3): 0 */
+BEGIN_FTR_SECTION
+ ori r8,r8,_PAGE_COHERENT /* set M (coherence required) */
+END_FTR_SECTION_IFSET(CPU_FTR_NEED_COHERENT)
+
+ /* Construct the high word of the PPC-style PTE (r5) */
+#ifndef CONFIG_PPC64BRIDGE
+ rlwinm r5,r3,7,1,24 /* put VSID in 0x7fffff80 bits */
+ rlwimi r5,r4,10,26,31 /* put in API (abbrev page index) */
+#else /* CONFIG_PPC64BRIDGE */
+ clrlwi r3,r3,8 /* reduce vsid to 24 bits */
+ sldi r5,r3,12 /* shift vsid into position */
+ rlwimi r5,r4,16,20,24 /* put in API (abbrev page index) */
+#endif /* CONFIG_PPC64BRIDGE */
+ SET_V(r5) /* set V (valid) bit */
+
+ /* Get the address of the primary PTE group in the hash table (r3) */
+_GLOBAL(hash_page_patch_A)
+ addis r0,r7,Hash_base@h /* base address of hash table */
+ rlwimi r0,r3,LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* VSID -> hash */
+ rlwinm r3,r4,20+LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* PI -> hash */
+ xor r3,r3,r0 /* make primary hash */
+ li r0,8 /* PTEs/group */
+
+ /*
+ * Test the _PAGE_HASHPTE bit in the old linux PTE, and skip the search
+ * if it is clear, meaning that the HPTE isn't there already...
+ */
+ andi. r6,r6,_PAGE_HASHPTE
+ beq+ 10f /* no PTE: go look for an empty slot */
+ tlbie r4
+
+ addis r4,r7,htab_hash_searches@ha
+ lwz r6,htab_hash_searches@l(r4)
+ addi r6,r6,1 /* count how many searches we do */
+ stw r6,htab_hash_searches@l(r4)
+
+ /* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */
+ mtctr r0
+ addi r4,r3,-PTE_SIZE
+1: LDPTEu r6,PTE_SIZE(r4) /* get next PTE */
+ CMPPTE 0,r6,r5
+ bdnzf 2,1b /* loop while ctr != 0 && !cr0.eq */
+ beq+ found_slot
+
+ /* Search the secondary PTEG for a matching PTE */
+ ori r5,r5,PTE_H /* set H (secondary hash) bit */
+_GLOBAL(hash_page_patch_B)
+ xoris r4,r3,Hash_msk>>16 /* compute secondary hash */
+ xori r4,r4,(-PTEG_SIZE & 0xffff)
+ addi r4,r4,-PTE_SIZE
+ mtctr r0
+2: LDPTEu r6,PTE_SIZE(r4)
+ CMPPTE 0,r6,r5
+ bdnzf 2,2b
+ beq+ found_slot
+ xori r5,r5,PTE_H /* clear H bit again */
+
+ /* Search the primary PTEG for an empty slot */
+10: mtctr r0
+ addi r4,r3,-PTE_SIZE /* search primary PTEG */
+1: LDPTEu r6,PTE_SIZE(r4) /* get next PTE */
+ TST_V(r6) /* test valid bit */
+ bdnzf 2,1b /* loop while ctr != 0 && !cr0.eq */
+ beq+ found_empty
+
+ /* update counter of times that the primary PTEG is full */
+ addis r4,r7,primary_pteg_full@ha
+ lwz r6,primary_pteg_full@l(r4)
+ addi r6,r6,1
+ stw r6,primary_pteg_full@l(r4)
+
+ /* Search the secondary PTEG for an empty slot */
+ ori r5,r5,PTE_H /* set H (secondary hash) bit */
+_GLOBAL(hash_page_patch_C)
+ xoris r4,r3,Hash_msk>>16 /* compute secondary hash */
+ xori r4,r4,(-PTEG_SIZE & 0xffff)
+ addi r4,r4,-PTE_SIZE
+ mtctr r0
+2: LDPTEu r6,PTE_SIZE(r4)
+ TST_V(r6)
+ bdnzf 2,2b
+ beq+ found_empty
+ xori r5,r5,PTE_H /* clear H bit again */
+
+ /*
+ * Choose an arbitrary slot in the primary PTEG to overwrite.
+ * Since both the primary and secondary PTEGs are full, and we
+ * have no information that the PTEs in the primary PTEG are
+ * more important or useful than those in the secondary PTEG,
+ * and we know there is a definite (although small) speed
+ * advantage to putting the PTE in the primary PTEG, we always
+ * put the PTE in the primary PTEG.
+ */
+ addis r4,r7,next_slot@ha
+ lwz r6,next_slot@l(r4)
+ addi r6,r6,PTE_SIZE
+ andi. r6,r6,7*PTE_SIZE
+ stw r6,next_slot@l(r4)
+ add r4,r3,r6
+
+#ifndef CONFIG_SMP
+ /* Store PTE in PTEG */
+found_empty:
+ STPTE r5,0(r4)
+found_slot:
+ STPTE r8,PTE_SIZE/2(r4)
+
+#else /* CONFIG_SMP */
+/*
+ * Between the tlbie above and updating the hash table entry below,
+ * another CPU could read the hash table entry and put it in its TLB.
+ * There are 3 cases:
+ * 1. using an empty slot
+ * 2. updating an earlier entry to change permissions (i.e. enable write)
+ * 3. taking over the PTE for an unrelated address
+ *
+ * In each case it doesn't really matter if the other CPUs have the old
+ * PTE in their TLB. So we don't need to bother with another tlbie here,
+ * which is convenient as we've overwritten the register that had the
+ * address. :-) The tlbie above is mainly to make sure that this CPU comes
+ * and gets the new PTE from the hash table.
+ *
+ * We do however have to make sure that the PTE is never in an invalid
+ * state with the V bit set.
+ */
+found_empty:
+found_slot:
+ CLR_V(r5,r0) /* clear V (valid) bit in PTE */
+ STPTE r5,0(r4)
+ sync
+ TLBSYNC
+ STPTE r8,PTE_SIZE/2(r4) /* put in correct RPN, WIMG, PP bits */
+ sync
+ SET_V(r5)
+ STPTE r5,0(r4) /* finally set V bit in PTE */
+#endif /* CONFIG_SMP */
+
+ sync /* make sure pte updates get to memory */
+ blr
+
+ .comm next_slot,4
+ .comm primary_pteg_full,4
+ .comm htab_hash_searches,4
+
+/*
+ * Flush the entry for a particular page from the hash table.
+ *
+ * flush_hash_pages(unsigned context, unsigned long va, unsigned long pmdval,
+ * int count)
+ *
+ * We assume that there is a hash table in use (Hash != 0).
+ */
+_GLOBAL(flush_hash_pages)
+ tophys(r7,0)
+
+ /*
+ * We disable interrupts here, even on UP, because we want
+ * the _PAGE_HASHPTE bit to be a reliable indication of
+ * whether the HPTE exists (or at least whether one did once).
+ * We also turn off the MMU for data accesses so that we
+ * we can't take a hash table miss (assuming the code is
+ * covered by a BAT). -- paulus
+ */
+ mfmsr r10
+ SYNC
+ rlwinm r0,r10,0,17,15 /* clear bit 16 (MSR_EE) */
+ rlwinm r0,r0,0,28,26 /* clear MSR_DR */
+ mtmsr r0
+ SYNC_601
+ isync
+
+ /* First find a PTE in the range that has _PAGE_HASHPTE set */
+ rlwimi r5,r4,22,20,29
+1: lwz r0,0(r5)
+ cmpwi cr1,r6,1
+ andi. r0,r0,_PAGE_HASHPTE
+ bne 2f
+ ble cr1,19f
+ addi r4,r4,0x1000
+ addi r5,r5,4
+ addi r6,r6,-1
+ b 1b
+
+ /* Convert context and va to VSID */
+2: mulli r3,r3,897*16 /* multiply context by context skew */
+ rlwinm r0,r4,4,28,31 /* get ESID (top 4 bits of va) */
+ mulli r0,r0,0x111 /* multiply by ESID skew */
+ add r3,r3,r0 /* note code below trims to 24 bits */
+
+ /* Construct the high word of the PPC-style PTE (r11) */
+#ifndef CONFIG_PPC64BRIDGE
+ rlwinm r11,r3,7,1,24 /* put VSID in 0x7fffff80 bits */
+ rlwimi r11,r4,10,26,31 /* put in API (abbrev page index) */
+#else /* CONFIG_PPC64BRIDGE */
+ clrlwi r3,r3,8 /* reduce vsid to 24 bits */
+ sldi r11,r3,12 /* shift vsid into position */
+ rlwimi r11,r4,16,20,24 /* put in API (abbrev page index) */
+#endif /* CONFIG_PPC64BRIDGE */
+ SET_V(r11) /* set V (valid) bit */
+
+#ifdef CONFIG_SMP
+ addis r9,r7,mmu_hash_lock@ha
+ addi r9,r9,mmu_hash_lock@l
+ rlwinm r8,r1,0,0,18
+ add r8,r8,r7
+ lwz r8,TI_CPU(r8)
+ oris r8,r8,9
+10: lwarx r0,0,r9
+ cmpi 0,r0,0
+ bne- 11f
+ stwcx. r8,0,r9
+ beq+ 12f
+11: lwz r0,0(r9)
+ cmpi 0,r0,0
+ beq 10b
+ b 11b
+12: isync
+#endif
+
+ /*
+ * Check the _PAGE_HASHPTE bit in the linux PTE. If it is
+ * already clear, we're done (for this pte). If not,
+ * clear it (atomically) and proceed. -- paulus.
+ */
+33: lwarx r8,0,r5 /* fetch the pte */
+ andi. r0,r8,_PAGE_HASHPTE
+ beq 8f /* done if HASHPTE is already clear */
+ rlwinm r8,r8,0,31,29 /* clear HASHPTE bit */
+ stwcx. r8,0,r5 /* update the pte */
+ bne- 33b
+
+ /* Get the address of the primary PTE group in the hash table (r3) */
+_GLOBAL(flush_hash_patch_A)
+ addis r8,r7,Hash_base@h /* base address of hash table */
+ rlwimi r8,r3,LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* VSID -> hash */
+ rlwinm r0,r4,20+LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* PI -> hash */
+ xor r8,r0,r8 /* make primary hash */
+
+ /* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */
+ li r0,8 /* PTEs/group */
+ mtctr r0
+ addi r12,r8,-PTE_SIZE
+1: LDPTEu r0,PTE_SIZE(r12) /* get next PTE */
+ CMPPTE 0,r0,r11
+ bdnzf 2,1b /* loop while ctr != 0 && !cr0.eq */
+ beq+ 3f
+
+ /* Search the secondary PTEG for a matching PTE */
+ ori r11,r11,PTE_H /* set H (secondary hash) bit */
+ li r0,8 /* PTEs/group */
+_GLOBAL(flush_hash_patch_B)
+ xoris r12,r8,Hash_msk>>16 /* compute secondary hash */
+ xori r12,r12,(-PTEG_SIZE & 0xffff)
+ addi r12,r12,-PTE_SIZE
+ mtctr r0
+2: LDPTEu r0,PTE_SIZE(r12)
+ CMPPTE 0,r0,r11
+ bdnzf 2,2b
+ xori r11,r11,PTE_H /* clear H again */
+ bne- 4f /* should rarely fail to find it */
+
+3: li r0,0
+ STPTE r0,0(r12) /* invalidate entry */
+4: sync
+ tlbie r4 /* in hw tlb too */
+ sync
+
+8: ble cr1,9f /* if all ptes checked */
+81: addi r6,r6,-1
+ addi r5,r5,4 /* advance to next pte */
+ addi r4,r4,0x1000
+ lwz r0,0(r5) /* check next pte */
+ cmpwi cr1,r6,1
+ andi. r0,r0,_PAGE_HASHPTE
+ bne 33b
+ bgt cr1,81b
+
+9:
+#ifdef CONFIG_SMP
+ TLBSYNC
+ li r0,0
+ stw r0,0(r9) /* clear mmu_hash_lock */
+#endif
+
+19: mtmsr r10
+ SYNC_601
+ isync
+ blr
git://git.onelab.eu / linux-2.6.git / blobdiff