* Created, December 13, 2000 by Wayne Holm
* End Change Activity
*/
-#include <linux/config.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/threads.h>
#include <asm/iseries/it_lp_queue.h>
#include "irq.h"
+#include "pci.h"
#include "call_pci.h"
-
-#if defined(CONFIG_SMP)
-extern void iSeries_smp_message_recv(struct pt_regs *);
-#endif
+#include "smp.h"
#ifdef CONFIG_PCI
static int num_pending_irqs;
static int pending_irqs[NR_IRQS];
-static void int_received(struct pci_event *event, struct pt_regs *regs)
+static void int_received(struct pci_event *event)
{
int irq;
}
}
-static void pci_event_handler(struct HvLpEvent *event, struct pt_regs *regs)
+static void pci_event_handler(struct HvLpEvent *event)
{
if (event && (event->xType == HvLpEvent_Type_PciIo)) {
if (hvlpevent_is_int(event))
- int_received((struct pci_event *)event, regs);
+ int_received((struct pci_event *)event);
else
printk(KERN_ERR
"pci_event_handler: unexpected ack received\n");
printk(KERN_ERR "pci_event_handler: NULL event received\n");
}
-/*
- * This is called by init_IRQ. set in ppc_md.init_IRQ by iSeries_setup.c
- * It must be called before the bus walk.
- */
-void __init iSeries_init_IRQ(void)
-{
- /* Register PCI event handler and open an event path */
- int ret;
-
- ret = HvLpEvent_registerHandler(HvLpEvent_Type_PciIo,
- &pci_event_handler);
- if (ret == 0) {
- ret = HvLpEvent_openPath(HvLpEvent_Type_PciIo, 0);
- if (ret != 0)
- printk(KERN_ERR "iseries_init_IRQ: open event path "
- "failed with rc 0x%x\n", ret);
- } else
- printk(KERN_ERR "iseries_init_IRQ: register handler "
- "failed with rc 0x%x\n", ret);
-}
-
#define REAL_IRQ_TO_SUBBUS(irq) (((irq) >> 14) & 0xff)
#define REAL_IRQ_TO_BUS(irq) ((((irq) >> 6) & 0xff) + 1)
#define REAL_IRQ_TO_IDSEL(irq) ((((irq) >> 3) & 7) + 1)
{
u32 bus, dev_id, function, mask;
const u32 sub_bus = 0;
- unsigned int rirq = virt_irq_to_real_map[irq];
+ unsigned int rirq = (unsigned int)irq_map[irq].hwirq;
/* The IRQ has already been locked by the caller */
bus = REAL_IRQ_TO_BUS(rirq);
{
u32 bus, dev_id, function, mask;
const u32 sub_bus = 0;
- unsigned int rirq = virt_irq_to_real_map[irq];
+ unsigned int rirq = (unsigned int)irq_map[irq].hwirq;
bus = REAL_IRQ_TO_BUS(rirq);
function = REAL_IRQ_TO_FUNC(rirq);
for_each_irq (irq) {
irq_desc_t *desc = get_irq_desc(irq);
- if (desc && desc->handler && desc->handler->startup) {
+ if (desc && desc->chip && desc->chip->startup) {
spin_lock_irqsave(&desc->lock, flags);
- desc->handler->startup(irq);
+ desc->chip->startup(irq);
spin_unlock_irqrestore(&desc->lock, flags);
}
}
{
u32 bus, dev_id, function, mask;
const u32 sub_bus = 0;
- unsigned int rirq = virt_irq_to_real_map[irq];
+ unsigned int rirq = (unsigned int)irq_map[irq].hwirq;
/* irq should be locked by the caller */
bus = REAL_IRQ_TO_BUS(rirq);
{
u32 bus, dev_id, function, mask;
const u32 sub_bus = 0;
- unsigned int rirq = virt_irq_to_real_map[irq];
+ unsigned int rirq = (unsigned int)irq_map[irq].hwirq;
/* The IRQ has already been locked by the caller */
bus = REAL_IRQ_TO_BUS(rirq);
static void iseries_end_IRQ(unsigned int irq)
{
- unsigned int rirq = virt_irq_to_real_map[irq];
+ unsigned int rirq = (unsigned int)irq_map[irq].hwirq;
HvCallPci_eoi(REAL_IRQ_TO_BUS(rirq), REAL_IRQ_TO_SUBBUS(rirq),
(REAL_IRQ_TO_IDSEL(rirq) << 4) + REAL_IRQ_TO_FUNC(rirq));
}
-static hw_irq_controller iSeries_IRQ_handler = {
- .typename = "iSeries irq controller",
- .startup = iseries_startup_IRQ,
- .shutdown = iseries_shutdown_IRQ,
- .enable = iseries_enable_IRQ,
- .disable = iseries_disable_IRQ,
- .end = iseries_end_IRQ
+static struct irq_chip iseries_pic = {
+ .typename = "iSeries irq controller",
+ .startup = iseries_startup_IRQ,
+ .shutdown = iseries_shutdown_IRQ,
+ .unmask = iseries_enable_IRQ,
+ .mask = iseries_disable_IRQ,
+ .eoi = iseries_end_IRQ
};
/*
* Note that sub_bus is always 0 (at the moment at least).
*/
int __init iSeries_allocate_IRQ(HvBusNumber bus,
- HvSubBusNumber sub_bus, HvAgentId dev_id)
+ HvSubBusNumber sub_bus, u32 bsubbus)
{
- int virtirq;
unsigned int realirq;
- u8 idsel = (dev_id >> 4);
- u8 function = dev_id & 7;
+ u8 idsel = ISERIES_GET_DEVICE_FROM_SUBBUS(bsubbus);
+ u8 function = ISERIES_GET_FUNCTION_FROM_SUBBUS(bsubbus);
realirq = (((((sub_bus << 8) + (bus - 1)) << 3) + (idsel - 1)) << 3)
+ function;
- virtirq = virt_irq_create_mapping(realirq);
- irq_desc[virtirq].handler = &iSeries_IRQ_handler;
- return virtirq;
+ return irq_create_mapping(NULL, realirq);
}
#endif /* CONFIG_PCI */
/*
* Get the next pending IRQ.
*/
-int iSeries_get_irq(struct pt_regs *regs)
+unsigned int iSeries_get_irq(void)
{
- /* -2 means ignore this interrupt */
- int irq = -2;
+ int irq = NO_IRQ_IGNORE;
#ifdef CONFIG_SMP
if (get_lppaca()->int_dword.fields.ipi_cnt) {
get_lppaca()->int_dword.fields.ipi_cnt = 0;
- iSeries_smp_message_recv(regs);
+ iSeries_smp_message_recv();
}
#endif /* CONFIG_SMP */
if (hvlpevent_is_pending())
- process_hvlpevents(regs);
+ process_hvlpevents();
#ifdef CONFIG_PCI
if (num_pending_irqs) {
}
spin_unlock(&pending_irqs_lock);
if (irq >= NR_IRQS)
- irq = -2;
+ irq = NO_IRQ_IGNORE;
}
#endif
return irq;
}
+
+static int iseries_irq_host_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ set_irq_chip_and_handler(virq, &iseries_pic, handle_fasteoi_irq);
+
+ return 0;
+}
+
+static struct irq_host_ops iseries_irq_host_ops = {
+ .map = iseries_irq_host_map,
+};
+
+/*
+ * This is called by init_IRQ. set in ppc_md.init_IRQ by iSeries_setup.c
+ * It must be called before the bus walk.
+ */
+void __init iSeries_init_IRQ(void)
+{
+ /* Register PCI event handler and open an event path */
+ struct irq_host *host;
+ int ret;
+
+ /*
+ * The Hypervisor only allows us up to 256 interrupt
+ * sources (the irq number is passed in a u8).
+ */
+ irq_set_virq_count(256);
+
+ /* Create irq host. No need for a revmap since HV will give us
+ * back our virtual irq number
+ */
+ host = irq_alloc_host(IRQ_HOST_MAP_NOMAP, 0, &iseries_irq_host_ops, 0);
+ BUG_ON(host == NULL);
+ irq_set_default_host(host);
+
+ ret = HvLpEvent_registerHandler(HvLpEvent_Type_PciIo,
+ &pci_event_handler);
+ if (ret == 0) {
+ ret = HvLpEvent_openPath(HvLpEvent_Type_PciIo, 0);
+ if (ret != 0)
+ printk(KERN_ERR "iseries_init_IRQ: open event path "
+ "failed with rc 0x%x\n", ret);
+ } else
+ printk(KERN_ERR "iseries_init_IRQ: register handler "
+ "failed with rc 0x%x\n", ret);
+}
+