--- /dev/null
+/*
+ * Support for the interrupt controllers found on Power Macintosh,
+ * currently Apple's "Grand Central" interrupt controller in all
+ * it's incarnations. OpenPIC support used on newer machines is
+ * in a separate file
+ *
+ * Copyright (C) 1997 Paul Mackerras (paulus@samba.org)
+ * Copyright (C) 2005 Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ * IBM, Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/sysdev.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/module.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/time.h>
+#include <asm/pmac_feature.h>
+#include <asm/mpic.h>
+
+#include "pmac.h"
+
+/*
+ * XXX this should be in xmon.h, but putting it there means xmon.h
+ * has to include <linux/interrupt.h> (to get irqreturn_t), which
+ * causes all sorts of problems. -- paulus
+ */
+extern irqreturn_t xmon_irq(int, void *, struct pt_regs *);
+
+#ifdef CONFIG_PPC32
+struct pmac_irq_hw {
+ unsigned int event;
+ unsigned int enable;
+ unsigned int ack;
+ unsigned int level;
+};
+
+/* Default addresses */
+static volatile struct pmac_irq_hw __iomem *pmac_irq_hw[4];
+
+#define GC_LEVEL_MASK 0x3ff00000
+#define OHARE_LEVEL_MASK 0x1ff00000
+#define HEATHROW_LEVEL_MASK 0x1ff00000
+
+static int max_irqs;
+static int max_real_irqs;
+static u32 level_mask[4];
+
+static DEFINE_SPINLOCK(pmac_pic_lock);
+
+#define GATWICK_IRQ_POOL_SIZE 10
+static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE];
+
+#define NR_MASK_WORDS ((NR_IRQS + 31) / 32)
+static unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
+
+/*
+ * Mark an irq as "lost". This is only used on the pmac
+ * since it can lose interrupts (see pmac_set_irq_mask).
+ * -- Cort
+ */
+void __set_lost(unsigned long irq_nr, int nokick)
+{
+ if (!test_and_set_bit(irq_nr, ppc_lost_interrupts)) {
+ atomic_inc(&ppc_n_lost_interrupts);
+ if (!nokick)
+ set_dec(1);
+ }
+}
+
+static void pmac_mask_and_ack_irq(unsigned int irq_nr)
+{
+ unsigned long bit = 1UL << (irq_nr & 0x1f);
+ int i = irq_nr >> 5;
+ unsigned long flags;
+
+ if ((unsigned)irq_nr >= max_irqs)
+ return;
+
+ clear_bit(irq_nr, ppc_cached_irq_mask);
+ if (test_and_clear_bit(irq_nr, ppc_lost_interrupts))
+ atomic_dec(&ppc_n_lost_interrupts);
+ spin_lock_irqsave(&pmac_pic_lock, flags);
+ out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]);
+ out_le32(&pmac_irq_hw[i]->ack, bit);
+ do {
+ /* make sure ack gets to controller before we enable
+ interrupts */
+ mb();
+ } while((in_le32(&pmac_irq_hw[i]->enable) & bit)
+ != (ppc_cached_irq_mask[i] & bit));
+ spin_unlock_irqrestore(&pmac_pic_lock, flags);
+}
+
+static void pmac_set_irq_mask(unsigned int irq_nr, int nokicklost)
+{
+ unsigned long bit = 1UL << (irq_nr & 0x1f);
+ int i = irq_nr >> 5;
+ unsigned long flags;
+
+ if ((unsigned)irq_nr >= max_irqs)
+ return;
+
+ spin_lock_irqsave(&pmac_pic_lock, flags);
+ /* enable unmasked interrupts */
+ out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]);
+
+ do {
+ /* make sure mask gets to controller before we
+ return to user */
+ mb();
+ } while((in_le32(&pmac_irq_hw[i]->enable) & bit)
+ != (ppc_cached_irq_mask[i] & bit));
+
+ /*
+ * Unfortunately, setting the bit in the enable register
+ * when the device interrupt is already on *doesn't* set
+ * the bit in the flag register or request another interrupt.
+ */
+ if (bit & ppc_cached_irq_mask[i] & in_le32(&pmac_irq_hw[i]->level))
+ __set_lost((ulong)irq_nr, nokicklost);
+ spin_unlock_irqrestore(&pmac_pic_lock, flags);
+}
+
+/* When an irq gets requested for the first client, if it's an
+ * edge interrupt, we clear any previous one on the controller
+ */
+static unsigned int pmac_startup_irq(unsigned int irq_nr)
+{
+ unsigned long bit = 1UL << (irq_nr & 0x1f);
+ int i = irq_nr >> 5;
+
+ if ((irq_desc[irq_nr].status & IRQ_LEVEL) == 0)
+ out_le32(&pmac_irq_hw[i]->ack, bit);
+ set_bit(irq_nr, ppc_cached_irq_mask);
+ pmac_set_irq_mask(irq_nr, 0);
+
+ return 0;
+}
+
+static void pmac_mask_irq(unsigned int irq_nr)
+{
+ clear_bit(irq_nr, ppc_cached_irq_mask);
+ pmac_set_irq_mask(irq_nr, 0);
+ mb();
+}
+
+static void pmac_unmask_irq(unsigned int irq_nr)
+{
+ set_bit(irq_nr, ppc_cached_irq_mask);
+ pmac_set_irq_mask(irq_nr, 0);
+}
+
+static void pmac_end_irq(unsigned int irq_nr)
+{
+ if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
+ && irq_desc[irq_nr].action) {
+ set_bit(irq_nr, ppc_cached_irq_mask);
+ pmac_set_irq_mask(irq_nr, 1);
+ }
+}
+
+
+struct hw_interrupt_type pmac_pic = {
+ .typename = " PMAC-PIC ",
+ .startup = pmac_startup_irq,
+ .enable = pmac_unmask_irq,
+ .disable = pmac_mask_irq,
+ .ack = pmac_mask_and_ack_irq,
+ .end = pmac_end_irq,
+};
+
+struct hw_interrupt_type gatwick_pic = {
+ .typename = " GATWICK ",
+ .startup = pmac_startup_irq,
+ .enable = pmac_unmask_irq,
+ .disable = pmac_mask_irq,
+ .ack = pmac_mask_and_ack_irq,
+ .end = pmac_end_irq,
+};
+
+static irqreturn_t gatwick_action(int cpl, void *dev_id, struct pt_regs *regs)
+{
+ int irq, bits;
+
+ for (irq = max_irqs; (irq -= 32) >= max_real_irqs; ) {
+ int i = irq >> 5;
+ bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
+ /* We must read level interrupts from the level register */
+ bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]);
+ bits &= ppc_cached_irq_mask[i];
+ if (bits == 0)
+ continue;
+ irq += __ilog2(bits);
+ __do_IRQ(irq, regs);
+ return IRQ_HANDLED;
+ }
+ printk("gatwick irq not from gatwick pic\n");
+ return IRQ_NONE;
+}
+
+static int pmac_get_irq(struct pt_regs *regs)
+{
+ int irq;
+ unsigned long bits = 0;
+
+#ifdef CONFIG_SMP
+ void psurge_smp_message_recv(struct pt_regs *);
+
+ /* IPI's are a hack on the powersurge -- Cort */
+ if ( smp_processor_id() != 0 ) {
+ psurge_smp_message_recv(regs);
+ return -2; /* ignore, already handled */
+ }
+#endif /* CONFIG_SMP */
+ for (irq = max_real_irqs; (irq -= 32) >= 0; ) {
+ int i = irq >> 5;
+ bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
+ /* We must read level interrupts from the level register */
+ bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]);
+ bits &= ppc_cached_irq_mask[i];
+ if (bits == 0)
+ continue;
+ irq += __ilog2(bits);
+ break;
+ }
+
+ return irq;
+}
+
+/* This routine will fix some missing interrupt values in the device tree
+ * on the gatwick mac-io controller used by some PowerBooks
+ *
+ * Walking of OF nodes could use a bit more fixing up here, but it's not
+ * very important as this is all boot time code on static portions of the
+ * device-tree.
+ *
+ * However, the modifications done to "intrs" will have to be removed and
+ * replaced with proper updates of the "interrupts" properties or
+ * AAPL,interrupts, yet to be decided, once the dynamic parsing is there.
+ */
+static void __init pmac_fix_gatwick_interrupts(struct device_node *gw,
+ int irq_base)
+{
+ struct device_node *node;
+ int count;
+
+ memset(gatwick_int_pool, 0, sizeof(gatwick_int_pool));
+ count = 0;
+ for (node = NULL; (node = of_get_next_child(gw, node)) != NULL;) {
+ /* Fix SCC */
+ if ((strcasecmp(node->name, "escc") == 0) && node->child) {
+ if (node->child->n_intrs < 3) {
+ node->child->intrs = &gatwick_int_pool[count];
+ count += 3;
+ }
+ node->child->n_intrs = 3;
+ node->child->intrs[0].line = 15+irq_base;
+ node->child->intrs[1].line = 4+irq_base;
+ node->child->intrs[2].line = 5+irq_base;
+ printk(KERN_INFO "irq: fixed SCC on gatwick"
+ " (%d,%d,%d)\n",
+ node->child->intrs[0].line,
+ node->child->intrs[1].line,
+ node->child->intrs[2].line);
+ }
+ /* Fix media-bay & left SWIM */
+ if (strcasecmp(node->name, "media-bay") == 0) {
+ struct device_node* ya_node;
+
+ if (node->n_intrs == 0)
+ node->intrs = &gatwick_int_pool[count++];
+ node->n_intrs = 1;
+ node->intrs[0].line = 29+irq_base;
+ printk(KERN_INFO "irq: fixed media-bay on gatwick"
+ " (%d)\n", node->intrs[0].line);
+
+ ya_node = node->child;
+ while(ya_node) {
+ if (strcasecmp(ya_node->name, "floppy") == 0) {
+ if (ya_node->n_intrs < 2) {
+ ya_node->intrs = &gatwick_int_pool[count];
+ count += 2;
+ }
+ ya_node->n_intrs = 2;
+ ya_node->intrs[0].line = 19+irq_base;
+ ya_node->intrs[1].line = 1+irq_base;
+ printk(KERN_INFO "irq: fixed floppy on second controller (%d,%d)\n",
+ ya_node->intrs[0].line, ya_node->intrs[1].line);
+ }
+ if (strcasecmp(ya_node->name, "ata4") == 0) {
+ if (ya_node->n_intrs < 2) {
+ ya_node->intrs = &gatwick_int_pool[count];
+ count += 2;
+ }
+ ya_node->n_intrs = 2;
+ ya_node->intrs[0].line = 14+irq_base;
+ ya_node->intrs[1].line = 3+irq_base;
+ printk(KERN_INFO "irq: fixed ide on second controller (%d,%d)\n",
+ ya_node->intrs[0].line, ya_node->intrs[1].line);
+ }
+ ya_node = ya_node->sibling;
+ }
+ }
+ }
+ if (count > 10) {
+ printk("WARNING !! Gatwick interrupt pool overflow\n");
+ printk(" GATWICK_IRQ_POOL_SIZE = %d\n", GATWICK_IRQ_POOL_SIZE);
+ printk(" requested = %d\n", count);
+ }
+}
+
+/*
+ * The PowerBook 3400/2400/3500 can have a combo ethernet/modem
+ * card which includes an ohare chip that acts as a second interrupt
+ * controller. If we find this second ohare, set it up and fix the
+ * interrupt value in the device tree for the ethernet chip.
+ */
+static void __init enable_second_ohare(struct device_node *np)
+{
+ unsigned char bus, devfn;
+ unsigned short cmd;
+ struct device_node *ether;
+
+ /* This code doesn't strictly belong here, it could be part of
+ * either the PCI initialisation or the feature code. It's kept
+ * here for historical reasons.
+ */
+ if (pci_device_from_OF_node(np, &bus, &devfn) == 0) {
+ struct pci_controller* hose =
+ pci_find_hose_for_OF_device(np);
+ if (!hose) {
+ printk(KERN_ERR "Can't find PCI hose for OHare2 !\n");
+ return;
+ }
+ early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd);
+ cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+ cmd &= ~PCI_COMMAND_IO;
+ early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd);
+ }
+
+ /* Fix interrupt for the modem/ethernet combo controller. The number
+ * in the device tree (27) is bogus (correct for the ethernet-only
+ * board but not the combo ethernet/modem board).
+ * The real interrupt is 28 on the second controller -> 28+32 = 60.
+ */
+ ether = of_find_node_by_name(NULL, "pci1011,14");
+ if (ether && ether->n_intrs > 0) {
+ ether->intrs[0].line = 60;
+ printk(KERN_INFO "irq: Fixed ethernet IRQ to %d\n",
+ ether->intrs[0].line);
+ }
+ of_node_put(ether);
+}
+
+#ifdef CONFIG_XMON
+static struct irqaction xmon_action = {
+ .handler = xmon_irq,
+ .flags = 0,
+ .mask = CPU_MASK_NONE,
+ .name = "NMI - XMON"
+};
+#endif
+
+static struct irqaction gatwick_cascade_action = {
+ .handler = gatwick_action,
+ .flags = SA_INTERRUPT,
+ .mask = CPU_MASK_NONE,
+ .name = "cascade",
+};
+
+static void __init pmac_pic_probe_oldstyle(void)
+{
+ int i;
+ int irq_cascade = -1;
+ struct device_node *master = NULL;
+ struct device_node *slave = NULL;
+ u8 __iomem *addr;
+ struct resource r;
+
+ /* Set our get_irq function */
+ ppc_md.get_irq = pmac_get_irq;
+
+ /*
+ * Find the interrupt controller type & node
+ */
+
+ if ((master = of_find_node_by_name(NULL, "gc")) != NULL) {
+ max_irqs = max_real_irqs = 32;
+ level_mask[0] = GC_LEVEL_MASK;
+ } else if ((master = of_find_node_by_name(NULL, "ohare")) != NULL) {
+ max_irqs = max_real_irqs = 32;
+ level_mask[0] = OHARE_LEVEL_MASK;
+
+ /* We might have a second cascaded ohare */
+ slave = of_find_node_by_name(NULL, "pci106b,7");
+ if (slave) {
+ max_irqs = 64;
+ level_mask[1] = OHARE_LEVEL_MASK;
+ enable_second_ohare(slave);
+ }
+ } else if ((master = of_find_node_by_name(NULL, "mac-io")) != NULL) {
+ max_irqs = max_real_irqs = 64;
+ level_mask[0] = HEATHROW_LEVEL_MASK;
+ level_mask[1] = 0;
+
+ /* We might have a second cascaded heathrow */
+ slave = of_find_node_by_name(master, "mac-io");
+
+ /* Check ordering of master & slave */
+ if (device_is_compatible(master, "gatwick")) {
+ struct device_node *tmp;
+ BUG_ON(slave == NULL);
+ tmp = master;
+ master = slave;
+ slave = tmp;
+ }
+
+ /* We found a slave */
+ if (slave) {
+ max_irqs = 128;
+ level_mask[2] = HEATHROW_LEVEL_MASK;
+ level_mask[3] = 0;
+ pmac_fix_gatwick_interrupts(slave, max_real_irqs);
+ }
+ }
+ BUG_ON(master == NULL);
+
+ /* Set the handler for the main PIC */
+ for ( i = 0; i < max_real_irqs ; i++ )
+ irq_desc[i].handler = &pmac_pic;
+
+ /* Get addresses of first controller if we have a node for it */
+ BUG_ON(of_address_to_resource(master, 0, &r));
+
+ /* Map interrupts of primary controller */
+ addr = (u8 __iomem *) ioremap(r.start, 0x40);
+ i = 0;
+ pmac_irq_hw[i++] = (volatile struct pmac_irq_hw __iomem *)
+ (addr + 0x20);
+ if (max_real_irqs > 32)
+ pmac_irq_hw[i++] = (volatile struct pmac_irq_hw __iomem *)
+ (addr + 0x10);
+ of_node_put(master);
+
+ printk(KERN_INFO "irq: Found primary Apple PIC %s for %d irqs\n",
+ master->full_name, max_real_irqs);
+
+ /* Map interrupts of cascaded controller */
+ if (slave && !of_address_to_resource(slave, 0, &r)) {
+ addr = (u8 __iomem *)ioremap(r.start, 0x40);
+ pmac_irq_hw[i++] = (volatile struct pmac_irq_hw __iomem *)
+ (addr + 0x20);
+ if (max_irqs > 64)
+ pmac_irq_hw[i++] =
+ (volatile struct pmac_irq_hw __iomem *)
+ (addr + 0x10);
+ irq_cascade = slave->intrs[0].line;
+
+ printk(KERN_INFO "irq: Found slave Apple PIC %s for %d irqs"
+ " cascade: %d\n", slave->full_name,
+ max_irqs - max_real_irqs, irq_cascade);
+ }
+ of_node_put(slave);
+
+ /* disable all interrupts in all controllers */
+ for (i = 0; i * 32 < max_irqs; ++i)
+ out_le32(&pmac_irq_hw[i]->enable, 0);
+
+ /* mark level interrupts */
+ for (i = 0; i < max_irqs; i++)
+ if (level_mask[i >> 5] & (1UL << (i & 0x1f)))
+ irq_desc[i].status = IRQ_LEVEL;
+
+ /* Setup handlers for secondary controller and hook cascade irq*/
+ if (slave) {
+ for ( i = max_real_irqs ; i < max_irqs ; i++ )
+ irq_desc[i].handler = &gatwick_pic;
+ setup_irq(irq_cascade, &gatwick_cascade_action);
+ }
+ printk(KERN_INFO "irq: System has %d possible interrupts\n", max_irqs);
+#ifdef CONFIG_XMON
+ setup_irq(20, &xmon_action);
+#endif
+}
+#endif /* CONFIG_PPC32 */
+
+static int pmac_u3_cascade(struct pt_regs *regs, void *data)
+{
+ return mpic_get_one_irq((struct mpic *)data, regs);
+}
+
+static void __init pmac_pic_setup_mpic_nmi(struct mpic *mpic)
+{
+#if defined(CONFIG_XMON) && defined(CONFIG_PPC32)
+ struct device_node* pswitch;
+ int nmi_irq;
+
+ pswitch = of_find_node_by_name(NULL, "programmer-switch");
+ if (pswitch && pswitch->n_intrs) {
+ nmi_irq = pswitch->intrs[0].line;
+ mpic_irq_set_priority(nmi_irq, 9);
+ setup_irq(nmi_irq, &xmon_action);
+ }
+ of_node_put(pswitch);
+#endif /* defined(CONFIG_XMON) && defined(CONFIG_PPC32) */
+}
+
+static struct mpic * __init pmac_setup_one_mpic(struct device_node *np,
+ int master)
+{
+ unsigned char senses[128];
+ int offset = master ? 0 : 128;
+ int count = master ? 128 : 124;
+ const char *name = master ? " MPIC 1 " : " MPIC 2 ";
+ struct resource r;
+ struct mpic *mpic;
+ unsigned int flags = master ? MPIC_PRIMARY : 0;
+ int rc;
+
+ rc = of_address_to_resource(np, 0, &r);
+ if (rc)
+ return NULL;
+
+ pmac_call_feature(PMAC_FTR_ENABLE_MPIC, np, 0, 0);
+
+ prom_get_irq_senses(senses, offset, offset + count);
+
+ flags |= MPIC_WANTS_RESET;
+ if (get_property(np, "big-endian", NULL))
+ flags |= MPIC_BIG_ENDIAN;
+
+ /* Primary Big Endian means HT interrupts. This is quite dodgy
+ * but works until I find a better way
+ */
+ if (master && (flags & MPIC_BIG_ENDIAN))
+ flags |= MPIC_BROKEN_U3;
+
+ mpic = mpic_alloc(r.start, flags, 0, offset, count, master ? 252 : 0,
+ senses, count, name);
+ if (mpic == NULL)
+ return NULL;
+
+ mpic_init(mpic);
+
+ return mpic;
+ }
+
+static int __init pmac_pic_probe_mpic(void)
+{
+ struct mpic *mpic1, *mpic2;
+ struct device_node *np, *master = NULL, *slave = NULL;
+
+ /* We can have up to 2 MPICs cascaded */
+ for (np = NULL; (np = of_find_node_by_type(np, "open-pic"))
+ != NULL;) {
+ if (master == NULL &&
+ get_property(np, "interrupts", NULL) == NULL)
+ master = of_node_get(np);
+ else if (slave == NULL)
+ slave = of_node_get(np);
+ if (master && slave)
+ break;
+ }
+
+ /* Check for bogus setups */
+ if (master == NULL && slave != NULL) {
+ master = slave;
+ slave = NULL;
+ }
+
+ /* Not found, default to good old pmac pic */
+ if (master == NULL)
+ return -ENODEV;
+
+ /* Set master handler */
+ ppc_md.get_irq = mpic_get_irq;
+
+ /* Setup master */
+ mpic1 = pmac_setup_one_mpic(master, 1);
+ BUG_ON(mpic1 == NULL);
+
+ /* Install NMI if any */
+ pmac_pic_setup_mpic_nmi(mpic1);
+
+ of_node_put(master);
+
+ /* No slave, let's go out */
+ if (slave == NULL || slave->n_intrs < 1)
+ return 0;
+
+ mpic2 = pmac_setup_one_mpic(slave, 0);
+ if (mpic2 == NULL) {
+ printk(KERN_ERR "Failed to setup slave MPIC\n");
+ of_node_put(slave);
+ return 0;
+ }
+ mpic_setup_cascade(slave->intrs[0].line, pmac_u3_cascade, mpic2);
+
+ of_node_put(slave);
+ return 0;
+}
+
+
+void __init pmac_pic_init(void)
+{
+ /* We first try to detect Apple's new Core99 chipset, since mac-io
+ * is quite different on those machines and contains an IBM MPIC2.
+ */
+ if (pmac_pic_probe_mpic() == 0)
+ return;
+
+#ifdef CONFIG_PPC32
+ pmac_pic_probe_oldstyle();
+#endif
+}
+
+#if defined(CONFIG_PM) && defined(CONFIG_PPC32)
+/*
+ * These procedures are used in implementing sleep on the powerbooks.
+ * sleep_save_intrs() saves the states of all interrupt enables
+ * and disables all interrupts except for the nominated one.
+ * sleep_restore_intrs() restores the states of all interrupt enables.
+ */
+unsigned long sleep_save_mask[2];
+
+/* This used to be passed by the PMU driver but that link got
+ * broken with the new driver model. We use this tweak for now...
+ */
+static int pmacpic_find_viaint(void)
+{
+ int viaint = -1;
+
+#ifdef CONFIG_ADB_PMU
+ struct device_node *np;
+
+ if (pmu_get_model() != PMU_OHARE_BASED)
+ goto not_found;
+ np = of_find_node_by_name(NULL, "via-pmu");
+ if (np == NULL)
+ goto not_found;
+ viaint = np->intrs[0].line;
+#endif /* CONFIG_ADB_PMU */
+
+not_found:
+ return viaint;
+}
+
+static int pmacpic_suspend(struct sys_device *sysdev, pm_message_t state)
+{
+ int viaint = pmacpic_find_viaint();
+
+ sleep_save_mask[0] = ppc_cached_irq_mask[0];
+ sleep_save_mask[1] = ppc_cached_irq_mask[1];
+ ppc_cached_irq_mask[0] = 0;
+ ppc_cached_irq_mask[1] = 0;
+ if (viaint > 0)
+ set_bit(viaint, ppc_cached_irq_mask);
+ out_le32(&pmac_irq_hw[0]->enable, ppc_cached_irq_mask[0]);
+ if (max_real_irqs > 32)
+ out_le32(&pmac_irq_hw[1]->enable, ppc_cached_irq_mask[1]);
+ (void)in_le32(&pmac_irq_hw[0]->event);
+ /* make sure mask gets to controller before we return to caller */
+ mb();
+ (void)in_le32(&pmac_irq_hw[0]->enable);
+
+ return 0;
+}
+
+static int pmacpic_resume(struct sys_device *sysdev)
+{
+ int i;
+
+ out_le32(&pmac_irq_hw[0]->enable, 0);
+ if (max_real_irqs > 32)
+ out_le32(&pmac_irq_hw[1]->enable, 0);
+ mb();
+ for (i = 0; i < max_real_irqs; ++i)
+ if (test_bit(i, sleep_save_mask))
+ pmac_unmask_irq(i);
+
+ return 0;
+}
+
+#endif /* CONFIG_PM && CONFIG_PPC32 */
+
+static struct sysdev_class pmacpic_sysclass = {
+ set_kset_name("pmac_pic"),
+};
+
+static struct sys_device device_pmacpic = {
+ .id = 0,
+ .cls = &pmacpic_sysclass,
+};
+
+static struct sysdev_driver driver_pmacpic = {
+#if defined(CONFIG_PM) && defined(CONFIG_PPC32)
+ .suspend = &pmacpic_suspend,
+ .resume = &pmacpic_resume,
+#endif /* CONFIG_PM && CONFIG_PPC32 */
+};
+
+static int __init init_pmacpic_sysfs(void)
+{
+#ifdef CONFIG_PPC32
+ if (max_irqs == 0)
+ return -ENODEV;
+#endif
+ printk(KERN_DEBUG "Registering pmac pic with sysfs...\n");
+ sysdev_class_register(&pmacpic_sysclass);
+ sysdev_register(&device_pmacpic);
+ sysdev_driver_register(&pmacpic_sysclass, &driver_pmacpic);
+ return 0;
+}
+
+subsys_initcall(init_pmacpic_sysfs);
+
git://git.onelab.eu / linux-2.6.git / blobdiff