# if present on 'classic' PPC.
cacheflag-y := -DCLEAR_CACHES=""
# This file will flush / disable the L2, and L3 if present.
-clear_L2_L3 := $(boot)/simple/clear.S
+clear_L2_L3 := $(srctree)/$(boot)/simple/clear.S
#
# See arch/ppc/kconfig and arch/ppc/platforms/Kconfig
# for definition of what platform each config option refer to.
#----------------------------------------------------------------------------
+ zimage-$(CONFIG_CPCI690) := zImage-STRIPELF
+zimageinitrd-$(CONFIG_CPCI690) := zImage.initrd-STRIPELF
+ extra.o-$(CONFIG_CPCI690) := misc-cpci690.o
+ end-$(CONFIG_CPCI690) := cpci690
+ cacheflag-$(CONFIG_CPCI690) := -include $(clear_L2_L3)
+
zimage-$(CONFIG_IBM_OPENBIOS) := zImage-TREE
zimageinitrd-$(CONFIG_IBM_OPENBIOS) := zImage.initrd-TREE
end-$(CONFIG_IBM_OPENBIOS) := treeboot
end-$(CONFIG_EMBEDDEDBOOT) := embedded
misc-$(CONFIG_EMBEDDEDBOOT) := misc-embedded.o
+ zimage-$(CONFIG_BAMBOO) := zImage-TREE
+zimageinitrd-$(CONFIG_BAMBOO) := zImage.initrd-TREE
+ end-$(CONFIG_BAMBOO) := bamboo
+ entrypoint-$(CONFIG_BAMBOO) := 0x01000000
+ extra.o-$(CONFIG_BAMBOO) := pibs.o
+
+ zimage-$(CONFIG_BUBINGA) := zImage-TREE
+zimageinitrd-$(CONFIG_BUBINGA) := zImage.initrd-TREE
+ end-$(CONFIG_BUBINGA) := bubinga
+ entrypoint-$(CONFIG_BUBINGA) := 0x01000000
+ extra.o-$(CONFIG_BUBINGA) := openbios.o
+
zimage-$(CONFIG_EBONY) := zImage-TREE
zimageinitrd-$(CONFIG_EBONY) := zImage.initrd-TREE
end-$(CONFIG_EBONY) := ebony
entrypoint-$(CONFIG_EBONY) := 0x01000000
+ extra.o-$(CONFIG_EBONY) := openbios.o
+
+ zimage-$(CONFIG_LUAN) := zImage-TREE
+zimageinitrd-$(CONFIG_LUAN) := zImage.initrd-TREE
+ end-$(CONFIG_LUAN) := luan
+ entrypoint-$(CONFIG_LUAN) := 0x01000000
+ extra.o-$(CONFIG_LUAN) := pibs.o
+
+ zimage-$(CONFIG_YUCCA) := zImage-TREE
+zimageinitrd-$(CONFIG_YUCCA) := zImage.initrd-TREE
+ end-$(CONFIG_YUCCA) := yucca
+ entrypoint-$(CONFIG_YUCCA) := 0x01000000
+ extra.o-$(CONFIG_YUCCA) := pibs.o
zimage-$(CONFIG_OCOTEA) := zImage-TREE
zimageinitrd-$(CONFIG_OCOTEA) := zImage.initrd-TREE
end-$(CONFIG_OCOTEA) := ocotea
entrypoint-$(CONFIG_OCOTEA) := 0x01000000
+ extra.o-$(CONFIG_OCOTEA) := pibs.o
+
+ zimage-$(CONFIG_SYCAMORE) := zImage-TREE
+zimageinitrd-$(CONFIG_SYCAMORE) := zImage.initrd-TREE
+ end-$(CONFIG_SYCAMORE) := sycamore
+ entrypoint-$(CONFIG_SYCAMORE) := 0x01000000
+ extra.o-$(CONFIG_SYCAMORE) := openbios.o
- extra.o-$(CONFIG_EV64260) := direct.o misc-ev64260.o
+ zimage-$(CONFIG_WALNUT) := zImage-TREE
+zimageinitrd-$(CONFIG_WALNUT) := zImage.initrd-TREE
+ end-$(CONFIG_WALNUT) := walnut
+ entrypoint-$(CONFIG_WALNUT) := 0x01000000
+ extra.o-$(CONFIG_WALNUT) := openbios.o
+
+ extra.o-$(CONFIG_EV64260) := misc-ev64260.o
end-$(CONFIG_EV64260) := ev64260
cacheflag-$(CONFIG_EV64260) := -include $(clear_L2_L3)
+ extra.o-$(CONFIG_CHESTNUT) := misc-chestnut.o
+ end-$(CONFIG_CHESTNUT) := chestnut
+
zimage-$(CONFIG_GEMINI) := zImage-STRIPELF
zimageinitrd-$(CONFIG_GEMINI) := zImage.initrd-STRIPELF
end-$(CONFIG_GEMINI) := gemini
- extra.o-$(CONFIG_K2) := legacy.o
- end-$(CONFIG_K2) := k2
- cacheflag-$(CONFIG_K2) := -include $(clear_L2_L3)
+ extra.o-$(CONFIG_KATANA) := misc-katana.o
+ end-$(CONFIG_KATANA) := katana
+ cacheflag-$(CONFIG_KATANA) := -include $(clear_L2_L3)
+
+ extra.o-$(CONFIG_RADSTONE_PPC7D) := misc-radstone_ppc7d.o
+ end-$(CONFIG_RADSTONE_PPC7D) := radstone_ppc7d
+ cacheflag-$(CONFIG_RADSTONE_PPC7D) := -include $(clear_L2_L3)
+
+ extra.o-$(CONFIG_EV64360) := misc-ev64360.o
+ end-$(CONFIG_EV64360) := ev64360
+ cacheflag-$(CONFIG_EV64360) := -include $(clear_L2_L3)
# kconfig 'feature', only one of these will ever be 'y' at a time.
# The rest will be unset.
-motorola := $(CONFIG_MCPN765)$(CONFIG_MVME5100)$(CONFIG_PRPMC750) \
+motorola := $(CONFIG_MVME5100)$(CONFIG_PRPMC750) \
$(CONFIG_PRPMC800)$(CONFIG_LOPEC)$(CONFIG_PPLUS)
motorola := $(strip $(motorola))
-pcore := $(CONFIG_PCORE)$(CONFIG_POWERPMC250)
zimage-$(motorola) := zImage-PPLUS
zimageinitrd-$(motorola) := zImage.initrd-PPLUS
end-$(motorola) := pplus
# Overrides previous assingment
- extra.o-$(CONFIG_PPLUS) := legacy.o
+ extra.o-$(CONFIG_PPLUS) := prepmap.o
extra.o-$(CONFIG_LOPEC) := mpc10x_memory.o
- zimage-$(pcore) := zImage-STRIPELF
-zimageinitrd-$(pcore) := zImage.initrd-STRIPELF
- extra.o-$(pcore) := chrpmap.o
- end-$(pcore) := pcore
- cacheflag-$(pcore) := -include $(clear_L2_L3)
-
+# Really only valid if CONFIG_6xx=y
zimage-$(CONFIG_PPC_PREP) := zImage-PPLUS
zimageinitrd-$(CONFIG_PPC_PREP) := zImage.initrd-PPLUS
- extra.o-$(CONFIG_PPC_PREP) := legacy.o
+ifeq ($(CONFIG_6xx),y)
+ extra.o-$(CONFIG_PPC_PREP) := prepmap.o
misc-$(CONFIG_PPC_PREP) += misc-prep.o mpc10x_memory.o
+endif
end-$(CONFIG_PPC_PREP) := prep
end-$(CONFIG_SANDPOINT) := sandpoint
entrypoint-$(CONFIG_SPRUCE) := 0x00800000
misc-$(CONFIG_SPRUCE) += misc-spruce.o
+ zimage-$(CONFIG_LITE5200) := zImage-STRIPELF
+zimageinitrd-$(CONFIG_LITE5200) := zImage.initrd-STRIPELF
+ end-$(CONFIG_LITE5200) := lite5200
+ cacheflag-$(CONFIG_LITE5200) := -include $(clear_L2_L3)
+
+
# SMP images should have a '.smp' suffix.
end-$(CONFIG_SMP) := $(end-y).smp
# This is a treeboot that needs init functions until the
# boot rom is sorted out (i.e. this is short lived)
-extra-aflags-$(CONFIG_REDWOOD_4) := -Wa,-m405
-extra.o-$(CONFIG_REDWOOD_4) := rw4/rw4_init.o rw4/rw4_init_brd.o
EXTRA_AFLAGS := $(extra-aflags-y)
# head.o needs to get the cacheflags defined.
AFLAGS_head.o += $(cacheflag-y)
# Linker args. This specifies where the image will be run at.
-LD_ARGS := -T $(boot)/ld.script \
+LD_ARGS := -T $(srctree)/$(boot)/ld.script \
-Ttext $(CONFIG_BOOT_LOAD) -Bstatic
OBJCOPY_ARGS := -O elf32-powerpc
# head.o and relocate.o must be at the start.
boot-y := head.o relocate.o $(extra.o-y) $(misc-y)
-boot-$(CONFIG_40x) += embed_config.o
+boot-$(CONFIG_REDWOOD_5) += embed_config.o
+boot-$(CONFIG_REDWOOD_6) += embed_config.o
boot-$(CONFIG_8xx) += embed_config.o
boot-$(CONFIG_8260) += embed_config.o
+boot-$(CONFIG_EP405) += embed_config.o
+boot-$(CONFIG_XILINX_ML300) += embed_config.o
+boot-$(CONFIG_XILINX_ML403) += embed_config.o
boot-$(CONFIG_BSEIP) += iic.o
boot-$(CONFIG_MBX) += iic.o pci.o qspan_pci.o
+boot-$(CONFIG_MV64X60) += misc-mv64x60.o
boot-$(CONFIG_RPXCLASSIC) += iic.o pci.o qspan_pci.o
boot-$(CONFIG_RPXLITE) += iic.o
# Different boards need different serial implementations.
-ifeq ($(CONFIG_SERIAL_CONSOLE),y)
+ifeq ($(CONFIG_SERIAL_CPM_CONSOLE),y)
boot-$(CONFIG_8xx) += m8xx_tty.o
boot-$(CONFIG_8260) += m8260_tty.o
-boot-$(CONFIG_GT64260_CONSOLE) += gt64260_tty.o
endif
+boot-$(CONFIG_SERIAL_MPC52xx_CONSOLE) += mpc52xx_tty.o
+boot-$(CONFIG_SERIAL_MPSC_CONSOLE) += mv64x60_tty.o
LIBS := $(common)/lib.a $(bootlib)/lib.a
ifeq ($(CONFIG_PPC_PREP),y)
targets := dummy.o
-$(obj)/zvmlinux: $(OBJS) $(LIBS) $(boot)/ld.script $(images)/vmlinux.gz \
- $(obj)/dummy.o
+$(obj)/zvmlinux: $(OBJS) $(LIBS) $(srctree)/$(boot)/ld.script \
+ $(images)/vmlinux.gz $(obj)/dummy.o
$(OBJCOPY) $(OBJCOPY_ARGS) \
--add-section=.image=$(images)/vmlinux.gz \
--set-section-flags=.image=contents,alloc,load,readonly,data \
$(obj)/dummy.o $(obj)/image.o
$(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/image.o $(LIBS)
$(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab \
- -R .stabstr -R .ramdisk -R .sysmap
+ -R .stabstr -R .ramdisk
-$(obj)/zvmlinux.initrd: $(OBJS) $(LIBS) $(boot)/ld.script \
+$(obj)/zvmlinux.initrd: $(OBJS) $(LIBS) $(srctree)/$(boot)/ld.script \
$(images)/vmlinux.gz $(obj)/dummy.o
$(OBJCOPY) $(OBJCOPY_ARGS) \
--add-section=.ramdisk=$(images)/ramdisk.image.gz \
$(obj)/dummy.o $(obj)/image.o
$(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/image.o $(LIBS)
$(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab \
- -R .stabstr -R .sysmap
+ -R .stabstr
# Sort-of dummy rules, that let us format the image we want.
zImage: $(images)/$(zimage-y) $(obj)/zvmlinux
skip=64 bs=1k
$(images)/zImage-TREE: $(obj)/zvmlinux $(MKTREE)
- $(MKTREE) $(obj)/zvmlinux $(images)/zImage.$(end-y) $(ENTRYPOINT)
+ $(MKTREE) $(obj)/zvmlinux $(images)/zImage.$(end-y) $(entrypoint-y)
$(images)/zImage.initrd-TREE: $(obj)/zvmlinux.initrd $(MKTREE)
$(MKTREE) $(obj)/zvmlinux.initrd $(images)/zImage.initrd.$(end-y) \
- $(ENTRYPOINT)
+ $(entrypoint-y)
-$(images)/zImage-PPLUS: $(obj)/zvmlinux $(utils)/mkprep $(MKBUGBOOT)
+$(images)/zImage-PPLUS: $(obj)/zvmlinux $(MKPREP) $(MKBUGBOOT)
$(MKPREP) -pbp $(obj)/zvmlinux $(images)/zImage.$(end-y)
$(MKBUGBOOT) $(obj)/zvmlinux $(images)/zImage.bugboot
-$(images)/zImage.initrd-PPLUS: $(obj)/zvmlinux.initrd $(utils)/mkprep $(MKBUGBOOT)
+$(images)/zImage.initrd-PPLUS: $(obj)/zvmlinux.initrd $(MKPREP) $(MKBUGBOOT)
$(MKPREP) -pbp $(obj)/zvmlinux.initrd $(images)/zImage.initrd.$(end-y)
$(MKBUGBOOT) $(obj)/zvmlinux.initrd $(images)/zImage.initrd.bugboot
git://git.onelab.eu / linux-2.6.git / blobdiff