/*
- * arch/ppc/kernel/head_44x.S
- *
* Kernel execution entry point code.
*
* Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
* Author: MontaVista Software, Inc.
* frank_rowand@mvista.com or source@mvista.com
* debbie_chu@mvista.com
- * Copyright 2002-2004 MontaVista Software, Inc.
+ * Copyright 2002-2005 MontaVista Software, Inc.
* PowerPC 44x support, Matt Porter <mporter@kernel.crashing.org>
*
* This program is free software; you can redistribute it and/or modify it
* option) any later version.
*/
-#include <linux/config.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/cputable.h>
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
-#include <asm/offsets.h>
+#include <asm/asm-offsets.h>
#include "head_booke.h"
/* Force context change */
mfmsr r0
- mtspr SRR1, r0
+ mtspr SPRN_SRR1, r0
lis r0,3f@h
ori r0,r0,3f@l
- mtspr SRR0,r0
+ mtspr SPRN_SRR0,r0
sync
rfi
4:
#ifdef CONFIG_SERIAL_TEXT_DEBUG
/*
- * Add temporary UART mapping for early debug. This
- * mapping must be identical to that used by the early
- * bootloader code since the same asm/serial.h parameters
- * are used for polled operation.
+ * Add temporary UART mapping for early debug.
+ * We can map UART registers wherever we want as long as they don't
+ * interfere with other system mappings (e.g. with pinned entries).
+ * For an example of how we handle this - see ocotea.h. --ebs
*/
/* pageid fields */
- lis r3,0xe000
- ori r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M
+ lis r3,UART0_IO_BASE@h
+ ori r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_4K
/* xlat fields */
- lis r4,0x4000 /* RPN is 0x40000000 */
- ori r4,r4,0x0001 /* ERPN is 1 for second 4GB page */
+ lis r4,UART0_PHYS_IO_BASE@h /* RPN depends on SoC */
+#ifdef UART0_PHYS_ERPN
+ ori r4,r4,UART0_PHYS_ERPN /* Add ERPN if above 4GB */
+#endif
/* attrib fields */
li r5,0
ori r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_I | PPC44x_TLB_G)
- li r0,1 /* TLB slot 1 */
+ li r0,0 /* TLB slot 0 */
tlbwe r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */
tlbwe r4,r0,PPC44x_TLB_XLAT /* Load the translation fields */
lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */
mtspr SPRN_IVPR,r4
+#ifdef CONFIG_440EP
+ /* Clear DAPUIB flag in CCR0 (enable APU between CPU and FPU) */
+ mfspr r2,SPRN_CCR0
+ lis r3,0xffef
+ ori r3,r3,0xffff
+ and r2,r2,r3
+ mtspr SPRN_CCR0,r2
+ isync
+#endif
+
/*
* This is where the main kernel code starts.
*/
/* ptr to current thread */
addi r4,r2,THREAD /* init task's THREAD */
- mtspr SPRG3,r4
+ mtspr SPRN_SPRG3,r4
/* stack */
lis r1,init_thread_union@h
ori r4,r4,start_kernel@l
lis r3,MSR_KERNEL@h
ori r3,r3,MSR_KERNEL@l
- mtspr SRR0,r4
- mtspr SRR1,r3
+ mtspr SPRN_SRR0,r4
+ mtspr SPRN_SRR1,r3
rfi /* change context and jump to start_kernel */
/*
interrupt_base:
/* Critical Input Interrupt */
- CRITICAL_EXCEPTION(0x0100, CriticalInput, UnknownException)
+ CRITICAL_EXCEPTION(0x0100, CriticalInput, unknown_exception)
/* Machine Check Interrupt */
#ifdef CONFIG_440A
- MCHECK_EXCEPTION(0x0200, MachineCheck, MachineCheckException)
+ MCHECK_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
#else
- CRITICAL_EXCEPTION(0x0200, MachineCheck, MachineCheckException)
+ CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
#endif
/* Data Storage Interrupt */
START_EXCEPTION(DataStorage)
- mtspr SPRG0, r10 /* Save some working registers */
- mtspr SPRG1, r11
- mtspr SPRG4W, r12
- mtspr SPRG5W, r13
+ mtspr SPRN_SPRG0, r10 /* Save some working registers */
+ mtspr SPRN_SPRG1, r11
+ mtspr SPRN_SPRG4W, r12
+ mtspr SPRN_SPRG5W, r13
mfcr r11
- mtspr SPRG7W, r11
+ mtspr SPRN_SPRG7W, r11
/*
* Check if it was a store fault, if not then bail
/* If we are faulting a kernel address, we have to use the
* kernel page tables.
*/
- andis. r11, r10, 0x8000
- beq 3f
+ lis r11, TASK_SIZE@h
+ cmplw r10, r11
+ blt+ 3f
lis r11, swapper_pg_dir@h
ori r11, r11, swapper_pg_dir@l
/* Get the PGD for the current thread */
3:
- mfspr r11,SPRG3
+ mfspr r11,SPRN_SPRG3
lwz r11,PGDIR(r11)
/* Load PID into MMUCR TID */
/* Done...restore registers and get out of here.
*/
- mfspr r11, SPRG7R
+ mfspr r11, SPRN_SPRG7R
mtcr r11
- mfspr r13, SPRG5R
- mfspr r12, SPRG4R
+ mfspr r13, SPRN_SPRG5R
+ mfspr r12, SPRN_SPRG4R
- mfspr r11, SPRG1
- mfspr r10, SPRG0
+ mfspr r11, SPRN_SPRG1
+ mfspr r10, SPRN_SPRG0
rfi /* Force context change */
2:
* The bailout. Restore registers to pre-exception conditions
* and call the heavyweights to help us out.
*/
- mfspr r11, SPRG7R
+ mfspr r11, SPRN_SPRG7R
mtcr r11
- mfspr r13, SPRG5R
- mfspr r12, SPRG4R
+ mfspr r13, SPRN_SPRG5R
+ mfspr r12, SPRN_SPRG4R
- mfspr r11, SPRG1
- mfspr r10, SPRG0
+ mfspr r11, SPRN_SPRG1
+ mfspr r10, SPRN_SPRG0
b data_access
/* Instruction Storage Interrupt */
- START_EXCEPTION(InstructionStorage)
- NORMAL_EXCEPTION_PROLOG
- mr r4,r12 /* Pass SRR0 as arg2 */
- li r5,0 /* Pass zero as arg3 */
- EXC_XFER_EE_LITE(0x0400, handle_page_fault)
+ INSTRUCTION_STORAGE_EXCEPTION
/* External Input Interrupt */
EXCEPTION(0x0500, ExternalInput, do_IRQ, EXC_XFER_LITE)
/* Alignment Interrupt */
- START_EXCEPTION(Alignment)
- NORMAL_EXCEPTION_PROLOG
- mfspr r4,SPRN_DEAR /* Grab the DEAR and save it */
- stw r4,_DEAR(r11)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_EE(0x0600, AlignmentException)
+ ALIGNMENT_EXCEPTION
/* Program Interrupt */
- START_EXCEPTION(Program)
- NORMAL_EXCEPTION_PROLOG
- mfspr r4,SPRN_ESR /* Grab the ESR and save it */
- stw r4,_ESR(r11)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_STD(0x700, ProgramCheckException)
+ PROGRAM_EXCEPTION
/* Floating Point Unavailable Interrupt */
- EXCEPTION(0x2010, FloatingPointUnavailable, UnknownException, EXC_XFER_EE)
+#ifdef CONFIG_PPC_FPU
+ FP_UNAVAILABLE_EXCEPTION
+#else
+ EXCEPTION(0x2010, FloatingPointUnavailable, unknown_exception, EXC_XFER_EE)
+#endif
/* System Call Interrupt */
START_EXCEPTION(SystemCall)
EXC_XFER_EE_LITE(0x0c00, DoSyscall)
/* Auxillary Processor Unavailable Interrupt */
- EXCEPTION(0x2020, AuxillaryProcessorUnavailable, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x2020, AuxillaryProcessorUnavailable, unknown_exception, EXC_XFER_EE)
/* Decrementer Interrupt */
- START_EXCEPTION(Decrementer)
- NORMAL_EXCEPTION_PROLOG
- lis r0,TSR_DIS@h /* Setup the DEC interrupt mask */
- mtspr SPRN_TSR,r0 /* Clear the DEC interrupt */
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_LITE(0x1000, timer_interrupt)
+ DECREMENTER_EXCEPTION
/* Fixed Internal Timer Interrupt */
/* TODO: Add FIT support */
- EXCEPTION(0x1010, FixedIntervalTimer, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x1010, FixedIntervalTimer, unknown_exception, EXC_XFER_EE)
/* Watchdog Timer Interrupt */
/* TODO: Add watchdog support */
- CRITICAL_EXCEPTION(0x1020, WatchdogTimer, UnknownException)
+#ifdef CONFIG_BOOKE_WDT
+ CRITICAL_EXCEPTION(0x1020, WatchdogTimer, WatchdogException)
+#else
+ CRITICAL_EXCEPTION(0x1020, WatchdogTimer, unknown_exception)
+#endif
/* Data TLB Error Interrupt */
START_EXCEPTION(DataTLBError)
- mtspr SPRG0, r10 /* Save some working registers */
- mtspr SPRG1, r11
- mtspr SPRG4W, r12
- mtspr SPRG5W, r13
+ mtspr SPRN_SPRG0, r10 /* Save some working registers */
+ mtspr SPRN_SPRG1, r11
+ mtspr SPRN_SPRG4W, r12
+ mtspr SPRN_SPRG5W, r13
mfcr r11
- mtspr SPRG7W, r11
+ mtspr SPRN_SPRG7W, r11
mfspr r10, SPRN_DEAR /* Get faulting address */
/* If we are faulting a kernel address, we have to use the
* kernel page tables.
*/
- andis. r11, r10, 0x8000
- beq 3f
+ lis r11, TASK_SIZE@h
+ cmplw r10, r11
+ blt+ 3f
lis r11, swapper_pg_dir@h
ori r11, r11, swapper_pg_dir@l
/* Get the PGD for the current thread */
3:
- mfspr r11,SPRG3
+ mfspr r11,SPRN_SPRG3
lwz r11,PGDIR(r11)
/* Load PID into MMUCR TID */
/* The bailout. Restore registers to pre-exception conditions
* and call the heavyweights to help us out.
*/
- mfspr r11, SPRG7R
+ mfspr r11, SPRN_SPRG7R
mtcr r11
- mfspr r13, SPRG5R
- mfspr r12, SPRG4R
- mfspr r11, SPRG1
- mfspr r10, SPRG0
+ mfspr r13, SPRN_SPRG5R
+ mfspr r12, SPRN_SPRG4R
+ mfspr r11, SPRN_SPRG1
+ mfspr r10, SPRN_SPRG0
b data_access
/* Instruction TLB Error Interrupt */
* to a different point.
*/
START_EXCEPTION(InstructionTLBError)
- mtspr SPRG0, r10 /* Save some working registers */
- mtspr SPRG1, r11
- mtspr SPRG4W, r12
- mtspr SPRG5W, r13
+ mtspr SPRN_SPRG0, r10 /* Save some working registers */
+ mtspr SPRN_SPRG1, r11
+ mtspr SPRN_SPRG4W, r12
+ mtspr SPRN_SPRG5W, r13
mfcr r11
- mtspr SPRG7W, r11
- mfspr r10, SRR0 /* Get faulting address */
+ mtspr SPRN_SPRG7W, r11
+ mfspr r10, SPRN_SRR0 /* Get faulting address */
/* If we are faulting a kernel address, we have to use the
* kernel page tables.
*/
- andis. r11, r10, 0x8000
- beq 3f
+ lis r11, TASK_SIZE@h
+ cmplw r10, r11
+ blt+ 3f
lis r11, swapper_pg_dir@h
ori r11, r11, swapper_pg_dir@l
/* Get the PGD for the current thread */
3:
- mfspr r11,SPRG3
+ mfspr r11,SPRN_SPRG3
lwz r11,PGDIR(r11)
/* Load PID into MMUCR TID */
/* The bailout. Restore registers to pre-exception conditions
* and call the heavyweights to help us out.
*/
- mfspr r11, SPRG7R
+ mfspr r11, SPRN_SPRG7R
mtcr r11
- mfspr r13, SPRG5R
- mfspr r12, SPRG4R
- mfspr r11, SPRG1
- mfspr r10, SPRG0
+ mfspr r13, SPRN_SPRG5R
+ mfspr r12, SPRN_SPRG4R
+ mfspr r11, SPRN_SPRG1
+ mfspr r10, SPRN_SPRG0
b InstructionStorage
-/* Check for a single step debug exception while in an exception
- * handler before state has been saved. This is to catch the case
- * where an instruction that we are trying to single step causes
- * an exception (eg ITLB/DTLB miss) and thus the first instruction of
- * the exception handler generates a single step debug exception.
- *
- * If we get a debug trap on the first instruction of an exception handler,
- * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
- * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
- * The exception handler was handling a non-critical interrupt, so it will
- * save (and later restore) the MSR via SPRN_SRR1, which will still have
- * the MSR_DE bit set.
- */
/* Debug Interrupt */
- START_EXCEPTION(Debug)
- CRITICAL_EXCEPTION_PROLOG
-
- /*
- * If this is a single step or branch-taken exception in an
- * exception entry sequence, it was probably meant to apply to
- * the code where the exception occurred (since exception entry
- * doesn't turn off DE automatically). We simulate the effect
- * of turning off DE on entry to an exception handler by turning
- * off DE in the CSRR1 value and clearing the debug status.
- */
- mfspr r10,SPRN_DBSR /* check single-step/branch taken */
- andis. r10,r10,(DBSR_IC|DBSR_BT)@h
- beq+ 1f
- andi. r0,r9,MSR_PR /* check supervisor */
- beq 2f /* branch if we need to fix it up... */
-
- /* continue normal handling for a critical exception... */
-1: mfspr r4,SPRN_DBSR
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(DebugException, 0x2002, \
- (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
- NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
-
- /* here it looks like we got an inappropriate debug exception. */
-2: rlwinm r9,r9,0,~MSR_DE /* clear DE in the CSRR1 value */
- mtspr SPRN_DBSR,r10 /* clear the IC/BT debug intr status */
- /* restore state and get out */
- lwz r10,_CCR(r11)
- lwz r0,GPR0(r11)
- lwz r1,GPR1(r11)
- mtcrf 0x80,r10
- mtspr CSRR0,r12
- mtspr CSRR1,r9
- lwz r9,GPR9(r11)
-
- mtspr SPRG2,r8; /* SPRG2 only used in criticals */
- lis r8,crit_save@ha;
- lwz r10,crit_r10@l(r8)
- lwz r11,crit_r11@l(r8)
- mfspr r8,SPRG2
-
- rfci
- b .
+ DEBUG_EXCEPTION
/*
* Local functions
/* Done...restore registers and get out of here.
*/
- mfspr r11, SPRG7R
+ mfspr r11, SPRN_SPRG7R
mtcr r11
- mfspr r13, SPRG5R
- mfspr r12, SPRG4R
- mfspr r11, SPRG1
- mfspr r10, SPRG0
+ mfspr r13, SPRN_SPRG5R
+ mfspr r12, SPRN_SPRG4R
+ mfspr r11, SPRN_SPRG1
+ mfspr r10, SPRN_SPRG0
rfi /* Force context change */
/*
*
* The 44x core does not have an FPU.
*/
+#ifndef CONFIG_PPC_FPU
_GLOBAL(giveup_fpu)
blr
+#endif
/*
* extern void abort(void)
* goes at the beginning of the data segment, which is page-aligned.
*/
.data
-_GLOBAL(sdata)
-_GLOBAL(empty_zero_page)
+ .align 12
+ .globl sdata
+sdata:
+ .globl empty_zero_page
+empty_zero_page:
.space 4096
/*
* To support >32-bit physical addresses, we use an 8KB pgdir.
*/
-_GLOBAL(swapper_pg_dir)
+ .globl swapper_pg_dir
+swapper_pg_dir:
.space 8192
+/* Reserved 4k for the critical exception stack & 4k for the machine
+ * check stack per CPU for kernel mode exceptions */
.section .bss
-/* Stack for handling critical exceptions from kernel mode */
-critical_stack_bottom:
- .space 4096
-critical_stack_top:
- .previous
-
-/* Stack for handling machine check exceptions from kernel mode */
-mcheck_stack_bottom:
- .space 4096
-mcheck_stack_top:
- .previous
-
-/*
- * This area is used for temporarily saving registers during the
- * critical and machine check exception prologs. It must always
- * follow the page aligned allocations, so it starts on a page
- * boundary, ensuring that all crit_save areas are in a single
- * page.
- */
-
-/* crit_save */
-_GLOBAL(crit_save)
- .space 4
-_GLOBAL(crit_r10)
- .space 4
-_GLOBAL(crit_r11)
- .space 4
-_GLOBAL(crit_sprg0)
- .space 4
-_GLOBAL(crit_sprg1)
- .space 4
-_GLOBAL(crit_sprg4)
- .space 4
-_GLOBAL(crit_sprg5)
- .space 4
-_GLOBAL(crit_sprg7)
- .space 4
-_GLOBAL(crit_pid)
- .space 4
-_GLOBAL(crit_srr0)
- .space 4
-_GLOBAL(crit_srr1)
- .space 4
-
-/* mcheck_save */
-_GLOBAL(mcheck_save)
- .space 4
-_GLOBAL(mcheck_r10)
- .space 4
-_GLOBAL(mcheck_r11)
- .space 4
-_GLOBAL(mcheck_sprg0)
- .space 4
-_GLOBAL(mcheck_sprg1)
- .space 4
-_GLOBAL(mcheck_sprg4)
- .space 4
-_GLOBAL(mcheck_sprg5)
- .space 4
-_GLOBAL(mcheck_sprg7)
- .space 4
-_GLOBAL(mcheck_pid)
- .space 4
-_GLOBAL(mcheck_srr0)
- .space 4
-_GLOBAL(mcheck_srr1)
- .space 4
-_GLOBAL(mcheck_csrr0)
- .space 4
-_GLOBAL(mcheck_csrr1)
- .space 4
+ .align 12
+exception_stack_bottom:
+ .space BOOKE_EXCEPTION_STACK_SIZE
+ .globl exception_stack_top
+exception_stack_top:
/*
* This space gets a copy of optional info passed to us by the bootstrap
* which is used to pass parameters into the kernel like root=/dev/sda1, etc.
*/
-_GLOBAL(cmd_line)
+ .globl cmd_line
+cmd_line:
.space 512
/*
*/
abatron_pteptrs:
.space 8
-
-
git://git.onelab.eu / linux-2.6.git / blobdiff