#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
#include <asm/offsets.h>
-
-/*
- * Macros
- */
-
-#define SET_IVOR(vector_number, vector_label) \
- li r26,vector_label@l; \
- mtspr SPRN_IVOR##vector_number,r26; \
- sync
+#include "head_booke.h"
/* As with the other PowerPC ports, it is expected that when code
* execution begins here, the following registers contain valid, yet
tlbsx 0,r6 /* Fall through, we had to match */
match_TLB:
mfspr r7,SPRN_MAS0
- rlwinm r3,r7,16,28,31 /* Extract MAS0(Entry) */
+ rlwinm r3,r7,16,20,31 /* Extract MAS0(Entry) */
mfspr r7,SPRN_MAS1 /* Insure IPROT set */
oris r7,r7,MAS1_IPROT@h
andi. r9,r9,0xfff
li r6,0 /* Set Entry counter to 0 */
1: lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
- rlwimi r7,r6,16,12,15 /* Setup MAS0 = TLBSEL | ESEL(r6) */
+ rlwimi r7,r6,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r6) */
mtspr SPRN_MAS0,r7
tlbre
mfspr r7,SPRN_MAS1
andi. r5, r3, 0x1 /* Find an entry not used and is non-zero */
addi r5, r5, 0x1
lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
- rlwimi r7,r3,16,12,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
+ rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
mtspr SPRN_MAS0,r7
tlbre
/* Just modify the entry ID and EPN for the temp mapping */
lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
- rlwimi r7,r5,16,12,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */
+ rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */
mtspr SPRN_MAS0,r7
xori r6,r4,1 /* Setup TMP mapping in the other Address space */
slwi r6,r6,12
/* 5. Invalidate mapping we started in */
lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
- rlwimi r7,r3,16,12,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
+ rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
mtspr SPRN_MAS0,r7
tlbre
li r6,0
/* 8. Clear out the temp mapping */
lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
- rlwimi r7,r5,16,12,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */
+ rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */
mtspr SPRN_MAS0,r7
tlbre
mtspr SPRN_MAS1,r8
mtspr SPRN_IVPR,r4
/* Setup the defaults for TLB entries */
- li r2,MAS4_TSIZED(BOOKE_PAGESZ_4K)
+ li r2,(MAS4_TSIZED(BOOKE_PAGESZ_4K))@l
mtspr SPRN_MAS4, r2
#if 0
* We align on a 32 byte cache line boundary for good measure.
*/
-#define NORMAL_EXCEPTION_PROLOG \
- mtspr SPRN_SPRG0,r10; /* save two registers to work with */\
- mtspr SPRN_SPRG1,r11; \
- mtspr SPRN_SPRG4W,r1; \
- mfcr r10; /* save CR in r10 for now */\
- mfspr r11,SPRN_SRR1; /* check whether user or kernel */\
- andi. r11,r11,MSR_PR; \
- beq 1f; \
- mfspr r1,SPRG3; /* if from user, start at top of */\
- lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\
- addi r1,r1,THREAD_SIZE; \
-1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\
- tophys(r11,r1); \
- stw r10,_CCR(r11); /* save various registers */\
- stw r12,GPR12(r11); \
- stw r9,GPR9(r11); \
- mfspr r10,SPRG0; \
- stw r10,GPR10(r11); \
- mfspr r12,SPRG1; \
- stw r12,GPR11(r11); \
- mflr r10; \
- stw r10,_LINK(r11); \
- mfspr r10,SPRG4R; \
- mfspr r12,SRR0; \
- stw r10,GPR1(r11); \
- mfspr r9,SRR1; \
- stw r10,0(r11); \
- rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
- stw r0,GPR0(r11); \
- SAVE_4GPRS(3, r11); \
- SAVE_2GPRS(7, r11)
-
-/*
- * Exception prolog for critical exceptions. This is a little different
- * from the normal exception prolog above since a critical exception
- * can potentially occur at any point during normal exception processing.
- * Thus we cannot use the same SPRG registers as the normal prolog above.
- * Instead we use a couple of words of memory at low physical addresses.
- * This is OK since we don't support SMP on these processors. For Book E
- * processors, we also have a reserved register (SPRG2) that is only used
- * in critical exceptions so we can free up a GPR to use as the base for
- * indirect access to the critical exception save area. This is necessary
- * since the MMU is always on and the save area is offset from KERNELBASE.
- */
-#define CRITICAL_EXCEPTION_PROLOG \
- mtspr SPRG2,r8; /* SPRG2 only used in criticals */ \
- lis r8,crit_save@ha; \
- stw r10,crit_r10@l(r8); \
- stw r11,crit_r11@l(r8); \
- mfspr r10,SPRG0; \
- stw r10,crit_sprg0@l(r8); \
- mfspr r10,SPRG1; \
- stw r10,crit_sprg1@l(r8); \
- mfspr r10,SPRG4R; \
- stw r10,crit_sprg4@l(r8); \
- mfspr r10,SPRG5R; \
- stw r10,crit_sprg5@l(r8); \
- mfspr r10,SPRG7R; \
- stw r10,crit_sprg7@l(r8); \
- mfspr r10,SPRN_PID; \
- stw r10,crit_pid@l(r8); \
- mfspr r10,SRR0; \
- stw r10,crit_srr0@l(r8); \
- mfspr r10,SRR1; \
- stw r10,crit_srr1@l(r8); \
- mfspr r8,SPRG2; /* SPRG2 only used in criticals */ \
- mfcr r10; /* save CR in r10 for now */\
- mfspr r11,SPRN_CSRR1; /* check whether user or kernel */\
- andi. r11,r11,MSR_PR; \
- lis r11,critical_stack_top@h; \
- ori r11,r11,critical_stack_top@l; \
- beq 1f; \
- /* COMING FROM USER MODE */ \
- mfspr r11,SPRG3; /* if from user, start at top of */\
- lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
- addi r11,r11,THREAD_SIZE; \
-1: subi r11,r11,INT_FRAME_SIZE; /* Allocate an exception frame */\
- stw r10,_CCR(r11); /* save various registers */\
- stw r12,GPR12(r11); \
- stw r9,GPR9(r11); \
- mflr r10; \
- stw r10,_LINK(r11); \
- mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\
- stw r12,_DEAR(r11); /* since they may have had stuff */\
- mfspr r9,SPRN_ESR; /* in them at the point where the */\
- stw r9,_ESR(r11); /* exception was taken */\
- mfspr r12,CSRR0; \
- stw r1,GPR1(r11); \
- mfspr r9,CSRR1; \
- stw r1,0(r11); \
- tovirt(r1,r11); \
- rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
- stw r0,GPR0(r11); \
- SAVE_4GPRS(3, r11); \
- SAVE_2GPRS(7, r11)
-
-/*
- * Exception prolog for machine check exceptions. This is similar to
- * the critical exception prolog, except that machine check exceptions
- * have their own save area. For Book E processors, we also have a
- * reserved register (SPRG6) that is only used in machine check exceptions
- * so we can free up a GPR to use as the base for indirect access to the
- * machine check exception save area. This is necessary since the MMU
- * is always on and the save area is offset from KERNELBASE.
- */
-#define MCHECK_EXCEPTION_PROLOG \
- mtspr SPRG6W,r8; /* SPRG6 used in machine checks */ \
- lis r8,mcheck_save@ha; \
- stw r10,mcheck_r10@l(r8); \
- stw r11,mcheck_r11@l(r8); \
- mfspr r10,SPRG0; \
- stw r10,mcheck_sprg0@l(r8); \
- mfspr r10,SPRG1; \
- stw r10,mcheck_sprg1@l(r8); \
- mfspr r10,SPRG4R; \
- stw r10,mcheck_sprg4@l(r8); \
- mfspr r10,SPRG5R; \
- stw r10,mcheck_sprg5@l(r8); \
- mfspr r10,SPRG7R; \
- stw r10,mcheck_sprg7@l(r8); \
- mfspr r10,SPRN_PID; \
- stw r10,mcheck_pid@l(r8); \
- mfspr r10,SRR0; \
- stw r10,mcheck_srr0@l(r8); \
- mfspr r10,SRR1; \
- stw r10,mcheck_srr1@l(r8); \
- mfspr r10,CSRR0; \
- stw r10,mcheck_csrr0@l(r8); \
- mfspr r10,CSRR1; \
- stw r10,mcheck_csrr1@l(r8); \
- mfspr r8,SPRG6R; /* SPRG6 used in machine checks */ \
- mfcr r10; /* save CR in r10 for now */\
- mfspr r11,SPRN_MCSRR1; /* check whether user or kernel */\
- andi. r11,r11,MSR_PR; \
- lis r11,mcheck_stack_top@h; \
- ori r11,r11,mcheck_stack_top@l; \
- beq 1f; \
- /* COMING FROM USER MODE */ \
- mfspr r11,SPRG3; /* if from user, start at top of */\
- lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
- addi r11,r11,THREAD_SIZE; \
-1: subi r11,r11,INT_FRAME_SIZE; /* Allocate an exception frame */\
- stw r10,_CCR(r11); /* save various registers */\
- stw r12,GPR12(r11); \
- stw r9,GPR9(r11); \
- mflr r10; \
- stw r10,_LINK(r11); \
- mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\
- stw r12,_DEAR(r11); /* since they may have had stuff */\
- mfspr r9,SPRN_ESR; /* in them at the point where the */\
- stw r9,_ESR(r11); /* exception was taken */\
- mfspr r12,MCSRR0; \
- stw r1,GPR1(r11); \
- mfspr r9,MCSRR1; \
- stw r1,0(r11); \
- tovirt(r1,r11); \
- rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
- stw r0,GPR0(r11); \
- SAVE_4GPRS(3, r11); \
- SAVE_2GPRS(7, r11)
-
-/*
- * Exception vectors.
- */
-#define START_EXCEPTION(label) \
- .align 5; \
-label:
-
-#define FINISH_EXCEPTION(func) \
- bl transfer_to_handler_full; \
- .long func; \
- .long ret_from_except_full
-
-#define EXCEPTION(n, label, hdlr, xfer) \
- START_EXCEPTION(label); \
- NORMAL_EXCEPTION_PROLOG; \
- addi r3,r1,STACK_FRAME_OVERHEAD; \
- xfer(n, hdlr)
-
-#define CRITICAL_EXCEPTION(n, label, hdlr) \
- START_EXCEPTION(label); \
- CRITICAL_EXCEPTION_PROLOG; \
- addi r3,r1,STACK_FRAME_OVERHEAD; \
- EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
- NOCOPY, transfer_to_handler_full, \
- ret_from_except_full)
-
-#define MCHECK_EXCEPTION(n, label, hdlr) \
- START_EXCEPTION(label); \
- MCHECK_EXCEPTION_PROLOG; \
- mfspr r5,SPRN_ESR; \
- stw r5,_ESR(r11); \
- addi r3,r1,STACK_FRAME_OVERHEAD; \
- EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
- NOCOPY, mcheck_transfer_to_handler, \
- ret_from_mcheck_exc)
-
-#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret) \
- li r10,trap; \
- stw r10,TRAP(r11); \
- lis r10,msr@h; \
- ori r10,r10,msr@l; \
- copyee(r10, r9); \
- bl tfer; \
- .long hdlr; \
- .long ret
-
-#define COPY_EE(d, s) rlwimi d,s,0,16,16
-#define NOCOPY(d, s)
-
-#define EXC_XFER_STD(n, hdlr) \
- EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
- ret_from_except_full)
-
-#define EXC_XFER_LITE(n, hdlr) \
- EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
- ret_from_except)
-
-#define EXC_XFER_EE(n, hdlr) \
- EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
- ret_from_except_full)
-
-#define EXC_XFER_EE_LITE(n, hdlr) \
- EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \
- ret_from_except)
-
interrupt_base:
/* Critical Input Interrupt */
CRITICAL_EXCEPTION(0x0100, CriticalInput, UnknownException)
b data_access
/* Instruction Storage Interrupt */
- START_EXCEPTION(InstructionStorage)
- NORMAL_EXCEPTION_PROLOG
- mfspr r5,SPRN_ESR /* Grab the ESR and save it */
- stw r5,_ESR(r11)
- mr r4,r12 /* Pass SRR0 as arg2 */
- li r5,0 /* Pass zero as arg3 */
- EXC_XFER_EE_LITE(0x0400, handle_page_fault)
+ INSTRUCTION_STORAGE_EXCEPTION
/* External Input Interrupt */
EXCEPTION(0x0500, ExternalInput, do_IRQ, EXC_XFER_LITE)
/* Alignment Interrupt */
- START_EXCEPTION(Alignment)
- NORMAL_EXCEPTION_PROLOG
- mfspr r4,SPRN_DEAR /* Grab the DEAR and save it */
- stw r4,_DEAR(r11)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_EE(0x0600, AlignmentException)
+ ALIGNMENT_EXCEPTION
/* Program Interrupt */
- START_EXCEPTION(Program)
- NORMAL_EXCEPTION_PROLOG
- mfspr r4,SPRN_ESR /* Grab the ESR and save it */
- stw r4,_ESR(r11)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_STD(0x0700, ProgramCheckException)
+ PROGRAM_EXCEPTION
/* Floating Point Unavailable Interrupt */
EXCEPTION(0x0800, FloatingPointUnavailable, UnknownException, EXC_XFER_EE)
EXCEPTION(0x2900, AuxillaryProcessorUnavailable, UnknownException, EXC_XFER_EE)
/* Decrementer Interrupt */
- START_EXCEPTION(Decrementer)
- NORMAL_EXCEPTION_PROLOG
- lis r0,TSR_DIS@h /* Setup the DEC interrupt mask */
- mtspr SPRN_TSR,r0 /* Clear the DEC interrupt */
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_LITE(0x0900, timer_interrupt)
+ DECREMENTER_EXCEPTION
/* Fixed Internal Timer Interrupt */
/* TODO: Add FIT support */
ori r11, r11, swapper_pg_dir@l
mfspr r12,SPRN_MAS1 /* Set TID to 0 */
- li r13,MAS1_TID@l
- andc r12,r12,r13
+ rlwinm r12,r12,0,16,1
mtspr SPRN_MAS1,r12
b 4f
ori r11, r11, swapper_pg_dir@l
mfspr r12,SPRN_MAS1 /* Set TID to 0 */
- li r13,MAS1_TID@l
- andc r12,r12,r13
+ rlwinm r12,r12,0,16,1
mtspr SPRN_MAS1,r12
b 4f
EXCEPTION(0x2050, SPEFloatingPointRound, UnknownException, EXC_XFER_EE)
/* Performance Monitor */
- EXCEPTION(0x2060, PerformanceMonitor, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x2060, PerformanceMonitor, PerformanceMonitorException, EXC_XFER_STD)
-/* Check for a single step debug exception while in an exception
- * handler before state has been saved. This is to catch the case
- * where an instruction that we are trying to single step causes
- * an exception (eg ITLB/DTLB miss) and thus the first instruction of
- * the exception handler generates a single step debug exception.
- *
- * If we get a debug trap on the first instruction of an exception handler,
- * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
- * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
- * The exception handler was handling a non-critical interrupt, so it will
- * save (and later restore) the MSR via SPRN_SRR1, which will still have
- * the MSR_DE bit set.
- */
- /* Debug Interrupt */
- START_EXCEPTION(Debug)
- CRITICAL_EXCEPTION_PROLOG
- /*
- * If this is a single step or branch-taken exception in an
- * exception entry sequence, it was probably meant to apply to
- * the code where the exception occurred (since exception entry
- * doesn't turn off DE automatically). We simulate the effect
- * of turning off DE on entry to an exception handler by turning
- * off DE in the CSRR1 value and clearing the debug status.
- */
- mfspr r10,SPRN_DBSR /* check single-step/branch taken */
- andis. r10,r10,(DBSR_IC|DBSR_BT)@h
- beq+ 1f
- andi. r0,r9,MSR_PR /* check supervisor */
- beq 2f /* branch if we need to fix it up... */
-
- /* continue normal handling for a critical exception... */
-1: mfspr r4,SPRN_DBSR
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(DebugException, 0x2002, \
- (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
- NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
-
- /* here it looks like we got an inappropriate debug exception. */
-2: rlwinm r9,r9,0,~MSR_DE /* clear DE in the CSRR1 value */
- mtspr SPRN_DBSR,r10 /* clear the IC/BT debug intr status */
- /* restore state and get out */
- lwz r10,_CCR(r11)
- lwz r0,GPR0(r11)
- lwz r1,GPR1(r11)
- mtcrf 0x80,r10
- mtspr CSRR0,r12
- mtspr CSRR1,r9
- lwz r9,GPR9(r11)
-
- mtspr SPRG2,r8; /* SPRG2 only used in criticals */
- lis r8,crit_save@ha;
- lwz r10,crit_r10@l(r8)
- lwz r11,crit_r11@l(r8)
- mfspr r8,SPRG2
-
- rfci
- b .
+ /* Debug Interrupt */
+ DEBUG_EXCEPTION
/*
* Local functions