fedora core 6 1.2949 + vserver 2.2.0

[linux-2.6.git] / arch / ppc / platforms / 85xx / mpc8540_ads.c

diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.c b/arch/ppc/platforms/85xx/mpc8540_ads.c
index fca01e6..00a3ba5 100644 (file)
--- a/arch/ppc/platforms/85xx/mpc8540_ads.c
+++ b/arch/ppc/platforms/85xx/mpc8540_ads.c
@@ -1,9 +1,7 @@
 /*
- * arch/ppc/platforms/85xx/mpc8540_ads.c
- *
  * MPC8540ADS board specific routines
  *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * Copyright 2004 Freescale Semiconductor Inc.
  *
@@ -13,7 +11,6 @@
  * option) any later version.
  */
 
-#include <linux/config.h>
 #include <linux/stddef.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -24,7 +21,6 @@
 #include <linux/major.h>
 #include <linux/console.h>
 #include <linux/delay.h>
-#include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
 #include <linux/serial.h>
@@ -41,7 +37,6 @@
 #include <asm/time.h>
 #include <asm/io.h>
 #include <asm/machdep.h>
-#include <asm/prom.h>
 #include <asm/open_pic.h>
 #include <asm/bootinfo.h>
 #include <asm/pci-bridge.h>
@@ -65,6 +60,7 @@ mpc8540ads_setup_arch(void)
        bd_t *binfo = (bd_t *) __res;
        unsigned int freq;
        struct gianfar_platform_data *pdata;
+       struct gianfar_mdio_data *mdata;
 
        /* get the core frequency */
        freq = binfo->bi_intfreq;
@@ -88,33 +84,42 @@ mpc8540ads_setup_arch(void)
 #ifdef CONFIG_SERIAL_TEXT_DEBUG
        /* Invalidate the entry we stole earlier the serial ports
         * should be properly mapped */
-       invalidate_tlbcam_entry(NUM_TLBCAMS - 1);
+       invalidate_tlbcam_entry(num_tlbcam_entries - 1);
 #endif
 
+       /* setup the board related info for the MDIO bus */
+       mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
+
+       mdata->irq[0] = MPC85xx_IRQ_EXT5;
+       mdata->irq[1] = MPC85xx_IRQ_EXT5;
+       mdata->irq[2] = PHY_POLL;
+       mdata->irq[3] = MPC85xx_IRQ_EXT5;
+       mdata->irq[31] = PHY_POLL;
+
        /* setup the board related information for the enet controllers */
        pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
-       pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-       pdata->interruptPHY = MPC85xx_IRQ_EXT5;
-       pdata->phyid = 0;
-       /* fixup phy address */
-       pdata->phy_reg_addr += binfo->bi_immr_base;
-       memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
+       if (pdata) {
+               pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+               pdata->bus_id = 0;
+               pdata->phy_id = 0;
+               memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
+       }
 
        pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
-       pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-       pdata->interruptPHY = MPC85xx_IRQ_EXT5;
-       pdata->phyid = 1;
-       /* fixup phy address */
-       pdata->phy_reg_addr += binfo->bi_immr_base;
-       memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
+       if (pdata) {
+               pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+               pdata->bus_id = 0;
+               pdata->phy_id = 1;
+               memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
+       }
 
        pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_FEC);
-       pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-       pdata->interruptPHY = MPC85xx_IRQ_EXT5;
-       pdata->phyid = 3;
-       /* fixup phy address */
-       pdata->phy_reg_addr += binfo->bi_immr_base;
-       memcpy(pdata->mac_addr, binfo->bi_enet2addr, 6);
+       if (pdata) {
+               pdata->board_flags = 0;
+               pdata->bus_id = 0;
+               pdata->phy_id = 3;
+               memcpy(pdata->mac_addr, binfo->bi_enet2addr, 6);
+       }
 
 #ifdef CONFIG_BLK_DEV_INITRD
        if (initrd_start)
@@ -150,18 +155,18 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
                struct uart_port p;
 
                /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */
-               settlbcam(NUM_TLBCAMS - 1, binfo->bi_immr_base,
+               settlbcam(num_tlbcam_entries - 1, binfo->bi_immr_base,
                          binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0);
 
                memset(&p, 0, sizeof (p));
-               p.iotype = SERIAL_IO_MEM;
+               p.iotype = UPIO_MEM;
                p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET;
                p.uartclk = binfo->bi_busfreq;
 
                gen550_init(0, &p);
 
                memset(&p, 0, sizeof (p));
-               p.iotype = SERIAL_IO_MEM;
+               p.iotype = UPIO_MEM;
                p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET;
                p.uartclk = binfo->bi_busfreq;
 
@@ -187,7 +192,7 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
                strcpy(cmd_line, (char *) (r6 + KERNELBASE));
        }
 
-       identify_ppc_sys_by_id(mfspr(SVR));
+       identify_ppc_sys_by_id(mfspr(SPRN_SVR));
 
        /* setup the PowerPC module struct */
        ppc_md.setup_arch = mpc8540ads_setup_arch;
@@ -210,6 +215,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 #if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
        ppc_md.progress = gen550_progress;
 #endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */
+#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB)
+       ppc_md.early_serial_map = mpc85xx_early_serial_map;
+#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */
 
        if (ppc_md.progress)
                ppc_md.progress("mpc8540ads_init(): exit", 0);