/*
- * arch/ppc/platforms/85xx/mpc8540_ads.c
- *
* MPC8540ADS board specific routines
*
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
*
* Copyright 2004 Freescale Semiconductor Inc.
*
* option) any later version.
*/
-#include <linux/config.h>
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/major.h>
#include <linux/console.h>
#include <linux/delay.h>
-#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/initrd.h>
#include <linux/module.h>
+#include <linux/fsl_devices.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/machdep.h>
-#include <asm/prom.h>
#include <asm/open_pic.h>
#include <asm/bootinfo.h>
#include <asm/pci-bridge.h>
#include <asm/irq.h>
#include <asm/immap_85xx.h>
#include <asm/kgdb.h>
-#include <asm/ocp.h>
+#include <asm/ppc_sys.h>
#include <mm/mmu_decl.h>
-#include <syslib/ppc85xx_common.h>
#include <syslib/ppc85xx_setup.h>
-struct ocp_gfar_data mpc85xx_tsec1_def = {
- .interruptTransmit = MPC85xx_IRQ_TSEC1_TX,
- .interruptError = MPC85xx_IRQ_TSEC1_ERROR,
- .interruptReceive = MPC85xx_IRQ_TSEC1_RX,
- .interruptPHY = MPC85xx_IRQ_EXT5,
- .flags = (GFAR_HAS_GIGABIT | GFAR_HAS_MULTI_INTR
- | GFAR_HAS_RMON
- | GFAR_HAS_PHY_INTR | GFAR_HAS_COALESCE),
- .phyid = 0,
- .phyregidx = 0,
-};
-
-struct ocp_gfar_data mpc85xx_tsec2_def = {
- .interruptTransmit = MPC85xx_IRQ_TSEC2_TX,
- .interruptError = MPC85xx_IRQ_TSEC2_ERROR,
- .interruptReceive = MPC85xx_IRQ_TSEC2_RX,
- .interruptPHY = MPC85xx_IRQ_EXT5,
- .flags = (GFAR_HAS_GIGABIT | GFAR_HAS_MULTI_INTR
- | GFAR_HAS_RMON
- | GFAR_HAS_PHY_INTR | GFAR_HAS_COALESCE),
- .phyid = 1,
- .phyregidx = 0,
-};
-
-struct ocp_gfar_data mpc85xx_fec_def = {
- .interruptTransmit = MPC85xx_IRQ_FEC,
- .interruptError = MPC85xx_IRQ_FEC,
- .interruptReceive = MPC85xx_IRQ_FEC,
- .interruptPHY = MPC85xx_IRQ_EXT5,
- .flags = 0,
- .phyid = 3,
- .phyregidx = 0,
-};
-
-struct ocp_fs_i2c_data mpc85xx_i2c1_def = {
- .flags = FS_I2C_SEPARATE_DFSRR,
-};
-
/* ************************************************************************
*
* Setup the architecture
static void __init
mpc8540ads_setup_arch(void)
{
- struct ocp_def *def;
- struct ocp_gfar_data *einfo;
bd_t *binfo = (bd_t *) __res;
unsigned int freq;
+ struct gianfar_platform_data *pdata;
+ struct gianfar_mdio_data *mdata;
/* get the core frequency */
freq = binfo->bi_intfreq;
mpc85xx_setup_hose();
#endif
-#ifdef CONFIG_DUMMY_CONSOLE
- conswitchp = &dummy_con;
-#endif
-
#ifdef CONFIG_SERIAL_8250
mpc85xx_early_serial_map();
#endif
#ifdef CONFIG_SERIAL_TEXT_DEBUG
/* Invalidate the entry we stole earlier the serial ports
* should be properly mapped */
- invalidate_tlbcam_entry(NUM_TLBCAMS - 1);
+ invalidate_tlbcam_entry(num_tlbcam_entries - 1);
#endif
- def = ocp_get_one_device(OCP_VENDOR_FREESCALE, OCP_FUNC_GFAR, 0);
- if (def) {
- einfo = (struct ocp_gfar_data *) def->additions;
- memcpy(einfo->mac_addr, binfo->bi_enetaddr, 6);
+ /* setup the board related info for the MDIO bus */
+ mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
+
+ mdata->irq[0] = MPC85xx_IRQ_EXT5;
+ mdata->irq[1] = MPC85xx_IRQ_EXT5;
+ mdata->irq[2] = PHY_POLL;
+ mdata->irq[3] = MPC85xx_IRQ_EXT5;
+ mdata->irq[31] = PHY_POLL;
+
+ /* setup the board related information for the enet controllers */
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
+ if (pdata) {
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->bus_id = 0;
+ pdata->phy_id = 0;
+ memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
}
- def = ocp_get_one_device(OCP_VENDOR_FREESCALE, OCP_FUNC_GFAR, 1);
- if (def) {
- einfo = (struct ocp_gfar_data *) def->additions;
- memcpy(einfo->mac_addr, binfo->bi_enet1addr, 6);
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
+ if (pdata) {
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->bus_id = 0;
+ pdata->phy_id = 1;
+ memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
}
- def = ocp_get_one_device(OCP_VENDOR_FREESCALE, OCP_FUNC_GFAR, 2);
- if (def) {
- einfo = (struct ocp_gfar_data *) def->additions;
- memcpy(einfo->mac_addr, binfo->bi_enet2addr, 6);
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_FEC);
+ if (pdata) {
+ pdata->board_flags = 0;
+ pdata->bus_id = 0;
+ pdata->phy_id = 3;
+ memcpy(pdata->mac_addr, binfo->bi_enet2addr, 6);
}
#ifdef CONFIG_BLK_DEV_INITRD
#else
ROOT_DEV = Root_HDA1;
#endif
-
- ocp_for_each_device(mpc85xx_update_paddr_ocp, &(binfo->bi_immr_base));
}
/* ************************************************************************ */
#ifdef CONFIG_SERIAL_TEXT_DEBUG
{
bd_t *binfo = (bd_t *) __res;
+ struct uart_port p;
/* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */
- settlbcam(NUM_TLBCAMS - 1, binfo->bi_immr_base,
+ settlbcam(num_tlbcam_entries - 1, binfo->bi_immr_base,
binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0);
+
+ memset(&p, 0, sizeof (p));
+ p.iotype = UPIO_MEM;
+ p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET;
+ p.uartclk = binfo->bi_busfreq;
+
+ gen550_init(0, &p);
+
+ memset(&p, 0, sizeof (p));
+ p.iotype = UPIO_MEM;
+ p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET;
+ p.uartclk = binfo->bi_busfreq;
+
+ gen550_init(1, &p);
}
#endif
strcpy(cmd_line, (char *) (r6 + KERNELBASE));
}
+ identify_ppc_sys_by_id(mfspr(SPRN_SVR));
+
/* setup the PowerPC module struct */
ppc_md.setup_arch = mpc8540ads_setup_arch;
ppc_md.show_cpuinfo = mpc85xx_ads_show_cpuinfo;
#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
ppc_md.progress = gen550_progress;
#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */
+#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB)
+ ppc_md.early_serial_map = mpc85xx_early_serial_map;
+#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */
if (ppc_md.progress)
ppc_md.progress("mpc8540ads_init(): exit", 0);
git://git.onelab.eu / linux-2.6.git / blobdiff