*
* MPC8540ADS board specific routines
*
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
*
* Copyright 2004 Freescale Semiconductor Inc.
*
#include <linux/major.h>
#include <linux/console.h>
#include <linux/delay.h>
-#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/serial.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/machdep.h>
-#include <asm/prom.h>
#include <asm/open_pic.h>
#include <asm/bootinfo.h>
#include <asm/pci-bridge.h>
bd_t *binfo = (bd_t *) __res;
unsigned int freq;
struct gianfar_platform_data *pdata;
+ struct gianfar_mdio_data *mdata;
/* get the core frequency */
freq = binfo->bi_intfreq;
#ifdef CONFIG_SERIAL_TEXT_DEBUG
/* Invalidate the entry we stole earlier the serial ports
* should be properly mapped */
- invalidate_tlbcam_entry(NUM_TLBCAMS - 1);
+ invalidate_tlbcam_entry(num_tlbcam_entries - 1);
#endif
+ /* setup the board related info for the MDIO bus */
+ mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
+
+ mdata->irq[0] = MPC85xx_IRQ_EXT5;
+ mdata->irq[1] = MPC85xx_IRQ_EXT5;
+ mdata->irq[2] = -1;
+ mdata->irq[3] = MPC85xx_IRQ_EXT5;
+ mdata->irq[31] = -1;
+
/* setup the board related information for the enet controllers */
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
- pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->interruptPHY = MPC85xx_IRQ_EXT5;
- pdata->phyid = 0;
- /* fixup phy address */
- pdata->phy_reg_addr += binfo->bi_immr_base;
- memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
+ if (pdata) {
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->bus_id = 0;
+ pdata->phy_id = 0;
+ memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
+ }
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
- pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->interruptPHY = MPC85xx_IRQ_EXT5;
- pdata->phyid = 1;
- /* fixup phy address */
- pdata->phy_reg_addr += binfo->bi_immr_base;
- memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
+ if (pdata) {
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->bus_id = 0;
+ pdata->phy_id = 1;
+ memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
+ }
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_FEC);
- pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->interruptPHY = MPC85xx_IRQ_EXT5;
- pdata->phyid = 3;
- /* fixup phy address */
- pdata->phy_reg_addr += binfo->bi_immr_base;
- memcpy(pdata->mac_addr, binfo->bi_enet2addr, 6);
+ if (pdata) {
+ pdata->board_flags = 0;
+ pdata->bus_id = 0;
+ pdata->phy_id = 3;
+ memcpy(pdata->mac_addr, binfo->bi_enet2addr, 6);
+ }
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
struct uart_port p;
/* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */
- settlbcam(NUM_TLBCAMS - 1, binfo->bi_immr_base,
+ settlbcam(num_tlbcam_entries - 1, binfo->bi_immr_base,
binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0);
memset(&p, 0, sizeof (p));
- p.iotype = SERIAL_IO_MEM;
+ p.iotype = UPIO_MEM;
p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET;
p.uartclk = binfo->bi_busfreq;
gen550_init(0, &p);
memset(&p, 0, sizeof (p));
- p.iotype = SERIAL_IO_MEM;
+ p.iotype = UPIO_MEM;
p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET;
p.uartclk = binfo->bi_busfreq;
strcpy(cmd_line, (char *) (r6 + KERNELBASE));
}
- identify_ppc_sys_by_id(mfspr(SVR));
+ identify_ppc_sys_by_id(mfspr(SPRN_SVR));
/* setup the PowerPC module struct */
ppc_md.setup_arch = mpc8540ads_setup_arch;
#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
ppc_md.progress = gen550_progress;
#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */
+#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB)
+ ppc_md.early_serial_map = mpc85xx_early_serial_map;
+#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */
if (ppc_md.progress)
ppc_md.progress("mpc8540ads_init(): exit", 0);