/*
- * arch/ppc/platforms/85xx/mpc8560_ads.c
- *
* MPC8560ADS board specific routines
*
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
*
* Copyright 2004 Freescale Semiconductor Inc.
*
#include <linux/major.h>
#include <linux/console.h>
#include <linux/delay.h>
-#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/serial.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/machdep.h>
-#include <asm/prom.h>
#include <asm/open_pic.h>
#include <asm/bootinfo.h>
#include <asm/pci-bridge.h>
#include <syslib/ppc85xx_common.h>
#include <syslib/ppc85xx_setup.h>
-extern void cpm2_reset(void);
/* ************************************************************************
*
bd_t *binfo = (bd_t *) __res;
unsigned int freq;
struct gianfar_platform_data *pdata;
+ struct gianfar_mdio_data *mdata;
cpm2_reset();
mpc85xx_setup_hose();
#endif
+ /* setup the board related info for the MDIO bus */
+ mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
+
+ mdata->irq[0] = MPC85xx_IRQ_EXT5;
+ mdata->irq[1] = MPC85xx_IRQ_EXT5;
+ mdata->irq[2] = -1;
+ mdata->irq[3] = MPC85xx_IRQ_EXT5;
+ mdata->irq[31] = -1;
+
/* setup the board related information for the enet controllers */
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
- pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->interruptPHY = MPC85xx_IRQ_EXT5;
- pdata->phyid = 0;
- /* fixup phy address */
- pdata->phy_reg_addr += binfo->bi_immr_base;
- memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
+ if (pdata) {
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->bus_id = 0;
+ pdata->phy_id = 0;
+ memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
+ }
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
- pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->interruptPHY = MPC85xx_IRQ_EXT5;
- pdata->phyid = 1;
- /* fixup phy address */
- pdata->phy_reg_addr += binfo->bi_immr_base;
- memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
+ if (pdata) {
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->bus_id = 0;
+ pdata->phy_id = 1;
+ memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
+ }
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
static void __init
mpc8560_ads_init_IRQ(void)
{
- int i;
- volatile cpm2_map_t *immap = cpm2_immr;
-
/* Setup OpenPIC */
mpc85xx_ads_init_IRQ();
- /* disable all CPM interupts */
- immap->im_intctl.ic_simrh = 0x0;
- immap->im_intctl.ic_simrl = 0x0;
-
- for (i = CPM_IRQ_OFFSET; i < (NR_CPM_INTS + CPM_IRQ_OFFSET); i++)
- irq_desc[i].handler = &cpm2_pic;
-
- /* Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- immap->im_intctl.ic_sicr = 0;
- immap->im_intctl.ic_scprrh = 0x05309770;
- immap->im_intctl.ic_scprrl = 0x05309770;
+ /* Setup CPM2 PIC */
+ cpm2_init_IRQ();
setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction);
strcpy(cmd_line, (char *) (r6 + KERNELBASE));
}
- identify_ppc_sys_by_id(mfspr(SVR));
+ identify_ppc_sys_by_id(mfspr(SPRN_SVR));
/* setup the PowerPC module struct */
ppc_md.setup_arch = mpc8560ads_setup_arch;