--- /dev/null
+/*
+ *
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004 Red Hat, Inc.
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/immap_cpm2.h>
+#include <asm/mpc8260.h>
+#include <asm/cpm2.h>
+
+#include "m82xx_pci.h"
+
+/*
+ * Interrupt routing
+ */
+
+static inline int
+pq2pci_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ static char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ { PIRQA, PIRQB, PIRQC, PIRQD }, /* IDSEL 22 - PCI slot 0 */
+ { PIRQD, PIRQA, PIRQB, PIRQC }, /* IDSEL 23 - PCI slot 1 */
+ { PIRQC, PIRQD, PIRQA, PIRQB }, /* IDSEL 24 - PCI slot 2 */
+ };
+
+ const long min_idsel = 22, max_idsel = 24, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+}
+
+static void
+pq2pci_mask_irq(unsigned int irq)
+{
+ int bit = irq - NR_CPM_INTS;
+
+ *(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit));
+ return;
+}
+
+static void
+pq2pci_unmask_irq(unsigned int irq)
+{
+ int bit = irq - NR_CPM_INTS;
+
+ *(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit));
+ return;
+}
+
+static void
+pq2pci_mask_and_ack(unsigned int irq)
+{
+ int bit = irq - NR_CPM_INTS;
+
+ *(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit));
+ return;
+}
+
+static void
+pq2pci_end_irq(unsigned int irq)
+{
+ int bit = irq - NR_CPM_INTS;
+
+ *(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit));
+ return;
+}
+
+struct hw_interrupt_type pq2pci_ic = {
+ "PQ2 PCI",
+ NULL,
+ NULL,
+ pq2pci_unmask_irq,
+ pq2pci_mask_irq,
+ pq2pci_mask_and_ack,
+ pq2pci_end_irq,
+ 0
+};
+
+static irqreturn_t
+pq2pci_irq_demux(int irq, void *dev_id, struct pt_regs *regs)
+{
+ unsigned long stat, mask, pend;
+ int bit;
+
+ for(;;) {
+ stat = *(volatile unsigned long *) PCI_INT_STAT_REG;
+ mask = *(volatile unsigned long *) PCI_INT_MASK_REG;
+ pend = stat & ~mask & 0xf0000000;
+ if (!pend)
+ break;
+ for (bit = 0; pend != 0; ++bit, pend <<= 1) {
+ if (pend & 0x80000000)
+ __do_IRQ(NR_CPM_INTS + bit, regs);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction pq2pci_irqaction = {
+ .handler = pq2pci_irq_demux,
+ .flags = SA_INTERRUPT,
+ .mask = CPU_MASK_NONE,
+ .name = "PQ2 PCI cascade",
+};
+
+
+void
+pq2pci_init_irq(void)
+{
+ int irq;
+ volatile cpm2_map_t *immap = cpm2_immr;
+#if defined CONFIG_ADS8272
+ /* configure chip select for PCI interrupt controller */
+ immap->im_memctl.memc_br3 = PCI_INT_STAT_REG | 0x00001801;
+ immap->im_memctl.memc_or3 = 0xffff8010;
+#elif defined CONFIG_PQ2FADS
+ immap->im_memctl.memc_br8 = PCI_INT_STAT_REG | 0x00001801;
+ immap->im_memctl.memc_or8 = 0xffff8010;
+#endif
+ for (irq = NR_CPM_INTS; irq < NR_CPM_INTS + 4; irq++)
+ irq_desc[irq].handler = &pq2pci_ic;
+
+ /* make PCI IRQ level sensitive */
+ immap->im_intctl.ic_siexr &=
+ ~(1 << (14 - (PCI_INT_TO_SIU - SIU_INT_IRQ1)));
+
+ /* mask all PCI interrupts */
+ *(volatile unsigned long *) PCI_INT_MASK_REG |= 0xfff00000;
+
+ /* install the demultiplexer for the PCI cascade interrupt */
+ setup_irq(PCI_INT_TO_SIU, &pq2pci_irqaction);
+ return;
+}
+
+static int
+pq2pci_exclude_device(u_char bus, u_char devfn)
+{
+ return PCIBIOS_SUCCESSFUL;
+}
+
+/* PCI bus configuration registers.
+ */
+static void
+pq2ads_setup_pci(struct pci_controller *hose)
+{
+ __u32 val;
+ volatile cpm2_map_t *immap = cpm2_immr;
+ bd_t* binfo = (bd_t*) __res;
+ u32 sccr = immap->im_clkrst.car_sccr;
+ uint pci_div,freq,time;
+ /* PCI int lowest prio */
+ /* Each 4 bits is a device bus request and the MS 4bits
+ is highest priority */
+ /* Bus 4bit value
+ --- ----------
+ CPM high 0b0000
+ CPM middle 0b0001
+ CPM low 0b0010
+ PCI reguest 0b0011
+ Reserved 0b0100
+ Reserved 0b0101
+ Internal Core 0b0110
+ External Master 1 0b0111
+ External Master 2 0b1000
+ External Master 3 0b1001
+ The rest are reserved
+ */
+ immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893;
+ /* park bus on core */
+ immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_CORE;
+ /*
+ * Set up master windows that allow the CPU to access PCI space. These
+ * windows are set up using the two SIU PCIBR registers.
+ */
+
+ immap->im_memctl.memc_pcimsk0 = M82xx_PCI_PRIM_WND_SIZE;
+ immap->im_memctl.memc_pcibr0 = M82xx_PCI_PRIM_WND_BASE | PCIBR_ENABLE;
+
+#ifdef M82xx_PCI_SEC_WND_SIZE
+ immap->im_memctl.memc_pcimsk1 = M82xx_PCI_SEC_WND_SIZE;
+ immap->im_memctl.memc_pcibr1 = M82xx_PCI_SEC_WND_BASE | PCIBR_ENABLE;
+#endif
+
+#if defined CONFIG_ADS8272
+ immap->im_siu_conf.siu_82xx.sc_siumcr =
+ (immap->im_siu_conf.siu_82xx.sc_siumcr &
+ ~(SIUMCR_BBD | SIUMCR_ESE | SIUMCR_PBSE |
+ SIUMCR_CDIS | SIUMCR_DPPC11 | SIUMCR_L2CPC11 |
+ SIUMCR_LBPC11 | SIUMCR_APPC11 |
+ SIUMCR_CS10PC11 | SIUMCR_BCTLC11 | SIUMCR_MMR11)) |
+ SIUMCR_DPPC11 | SIUMCR_L2CPC01 | SIUMCR_LBPC00 |
+ SIUMCR_APPC10 | SIUMCR_CS10PC00 |
+ SIUMCR_BCTLC00 | SIUMCR_MMR11 ;
+
+#elif defined CONFIG_PQ2FADS
+ /*
+ * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
+ * and local bus for PCI (SIUMCR [LBPC]).
+ */
+ immap->im_siu_conf.siu_82xx.sc_siumcr = (immap->im_siu_conf.sc_siumcr &
+ ~(SIUMCR_L2PC11 | SIUMCR_LBPC11 | SIUMCR_CS10PC11 | SIUMCR_APPC11) |
+ SIUMCR_BBD | SIUMCR_LBPC01 | SIUMCR_DPPC11 | SIUMCR_APPC10;
+#endif
+ /* Enable PCI */
+ immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN);
+
+ pci_div = ( (sccr & SCCR_PCI_MODCK) ? 2 : 1) *
+ ( ( (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT) + 1);
+ freq = (uint)((2*binfo->bi_cpmfreq)/(pci_div));
+ time = (int)666666/freq;
+ /* due to PCI Local Bus spec, some devices needs to wait such a long
+ time after RST deassertion. More specifically, 0.508s for 66MHz & twice more for 33 */
+ printk("%s: The PCI bus is %d Mhz.\nWaiting %s after deasserting RST...\n",__FILE__,freq,
+ (time==1) ? "0.5 seconds":"1 second" );
+
+ {
+ int i;
+ for(i=0;i<(500*time);i++)
+ udelay(1000);
+ }
+
+ /* setup ATU registers */
+ immap->im_pci.pci_pocmr0 = cpu_to_le32(POCMR_ENABLE | POCMR_PCI_IO |
+ ((~(M82xx_PCI_IO_SIZE - 1U)) >> POTA_ADDR_SHIFT));
+ immap->im_pci.pci_potar0 = cpu_to_le32(M82xx_PCI_LOWER_IO >> POTA_ADDR_SHIFT);
+ immap->im_pci.pci_pobar0 = cpu_to_le32(M82xx_PCI_IO_BASE >> POTA_ADDR_SHIFT);
+
+ /* Set-up non-prefetchable window */
+ immap->im_pci.pci_pocmr1 = cpu_to_le32(POCMR_ENABLE | ((~(M82xx_PCI_MMIO_SIZE-1U)) >> POTA_ADDR_SHIFT));
+ immap->im_pci.pci_potar1 = cpu_to_le32(M82xx_PCI_LOWER_MMIO >> POTA_ADDR_SHIFT);
+ immap->im_pci.pci_pobar1 = cpu_to_le32((M82xx_PCI_LOWER_MMIO - M82xx_PCI_MMIO_OFFSET) >> POTA_ADDR_SHIFT);
+
+ /* Set-up prefetchable window */
+ immap->im_pci.pci_pocmr2 = cpu_to_le32(POCMR_ENABLE |POCMR_PREFETCH_EN |
+ (~(M82xx_PCI_MEM_SIZE-1U) >> POTA_ADDR_SHIFT));
+ immap->im_pci.pci_potar2 = cpu_to_le32(M82xx_PCI_LOWER_MEM >> POTA_ADDR_SHIFT);
+ immap->im_pci.pci_pobar2 = cpu_to_le32((M82xx_PCI_LOWER_MEM - M82xx_PCI_MEM_OFFSET) >> POTA_ADDR_SHIFT);
+
+ /* Inbound transactions from PCI memory space */
+ immap->im_pci.pci_picmr0 = cpu_to_le32(PICMR_ENABLE | PICMR_PREFETCH_EN |
+ ((~(M82xx_PCI_SLAVE_MEM_SIZE-1U)) >> PITA_ADDR_SHIFT));
+ immap->im_pci.pci_pibar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_BUS >> PITA_ADDR_SHIFT);
+ immap->im_pci.pci_pitar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_LOCAL>> PITA_ADDR_SHIFT);
+
+#if defined CONFIG_ADS8272
+ /* PCI int highest prio */
+ immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x01236745;
+#elif defined CONFIG_PQ2FADS
+ immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567;
+#endif
+ /* park bus on PCI */
+ immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
+
+ /* Enable bus mastering and inbound memory transactions */
+ early_read_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, &val);
+ val &= 0xffff0000;
+ val |= PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER;
+ early_write_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, val);
+
+}
+
+void __init pq2_find_bridges(void)
+{
+ extern int pci_assign_all_busses;
+ struct pci_controller * hose;
+ int host_bridge;
+
+ pci_assign_all_busses = 1;
+
+ hose = pcibios_alloc_controller();
+
+ if (!hose)
+ return;
+
+ ppc_md.pci_swizzle = common_swizzle;
+
+ hose->first_busno = 0;
+ hose->bus_offset = 0;
+ hose->last_busno = 0xff;
+
+#ifdef CONFIG_ADS8272
+ hose->set_cfg_type = 1;
+#endif
+
+ setup_m8260_indirect_pci(hose,
+ (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr,
+ (unsigned long)&cpm2_immr->im_pci.pci_cfg_data);
+
+ /* Make sure it is a supported bridge */
+ early_read_config_dword(hose,
+ 0,
+ PCI_DEVFN(0,0),
+ PCI_VENDOR_ID,
+ &host_bridge);
+ switch (host_bridge) {
+ case PCI_DEVICE_ID_MPC8265:
+ break;
+ case PCI_DEVICE_ID_MPC8272:
+ break;
+ default:
+ printk("Attempting to use unrecognized host bridge ID"
+ " 0x%08x.\n", host_bridge);
+ break;
+ }
+
+ pq2ads_setup_pci(hose);
+
+ hose->io_space.start = M82xx_PCI_LOWER_IO;
+ hose->io_space.end = M82xx_PCI_UPPER_IO;
+ hose->mem_space.start = M82xx_PCI_LOWER_MEM;
+ hose->mem_space.end = M82xx_PCI_UPPER_MMIO;
+ hose->pci_mem_offset = M82xx_PCI_MEM_OFFSET;
+
+ isa_io_base =
+ (unsigned long) ioremap(M82xx_PCI_IO_BASE,
+ M82xx_PCI_IO_SIZE);
+ hose->io_base_virt = (void *) isa_io_base;
+
+ /* setup resources */
+ pci_init_resource(&hose->mem_resources[0],
+ M82xx_PCI_LOWER_MEM,
+ M82xx_PCI_UPPER_MEM,
+ IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory");
+
+ pci_init_resource(&hose->mem_resources[1],
+ M82xx_PCI_LOWER_MMIO,
+ M82xx_PCI_UPPER_MMIO,
+ IORESOURCE_MEM, "PCI memory");
+
+ pci_init_resource(&hose->io_resource,
+ M82xx_PCI_LOWER_IO,
+ M82xx_PCI_UPPER_IO,
+ IORESOURCE_IO | 1, "PCI I/O");
+
+ ppc_md.pci_exclude_device = pq2pci_exclude_device;
+ hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
+
+ ppc_md.pci_map_irq = pq2pci_map_irq;
+ ppc_md.pcibios_fixup = NULL;
+ ppc_md.pcibios_fixup_bus = NULL;
+
+}
git://git.onelab.eu / linux-2.6.git / blobdiff