pci->piwar2 = 0;
pci->piwar3 = 0;
- /* Setup Phys:PCI 1:1 outbound mem window @ MPC85XX_PCI1_LOWER_MEM */
+ /* Setup 512M Phys:PCI 1:1 outbound mem window @ 0x80000000 */
pci->potar1 = (MPC85XX_PCI1_LOWER_MEM >> 12) & 0x000fffff;
pci->potear1 = 0x00000000;
pci->powbar1 = (MPC85XX_PCI1_LOWER_MEM >> 12) & 0x000fffff;
- /* Enable, Mem R/W */
- pci->powar1 = 0x80044000 |
- (__ilog2(MPC85XX_PCI1_UPPER_MEM - MPC85XX_PCI1_LOWER_MEM + 1) - 1);
+ pci->powar1 = 0x8004401c; /* Enable, Mem R/W, 512M */
- /* Setup outboud IO windows @ MPC85XX_PCI1_IO_BASE */
+ /* Setup 16M outboud IO windows @ 0xe2000000 */
pci->potar2 = 0x00000000;
pci->potear2 = 0x00000000;
pci->powbar2 = (MPC85XX_PCI1_IO_BASE >> 12) & 0x000fffff;
- /* Enable, IO R/W */
- pci->powar2 = 0x80088000 | (__ilog2(MPC85XX_PCI1_IO_SIZE) - 1);
+ pci->powar2 = 0x80088017; /* Enable, IO R/W, 16M */
/* Setup 2G inbound Memory Window @ 0 */
pci->pitar1 = 0x00000000;
extern int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin);
extern int mpc85xx_exclude_device(u_char bus, u_char devfn);
-#ifdef CONFIG_85xx_PCI2
+#if CONFIG_85xx_PCI2
static void __init
mpc85xx_setup_pci2(struct pci_controller *hose)
{
pci = ioremap(binfo->bi_immr_base + MPC85xx_PCI2_OFFSET,
MPC85xx_PCI2_SIZE);
- early_read_config_word(hose, hose->bus_offset, 0, PCI_COMMAND, &temps);
+ early_read_config_word(hose, 0, 0, PCI_COMMAND, &temps);
temps |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- early_write_config_word(hose, hose->bus_offset, 0, PCI_COMMAND, temps);
- early_write_config_byte(hose, hose->bus_offset, 0, PCI_LATENCY_TIMER, 0x80);
+ early_write_config_word(hose, 0, 0, PCI_COMMAND, temps);
+ early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80);
/* Disable all windows (except powar0 since its ignored) */
pci->powar1 = 0;
pci->piwar2 = 0;
pci->piwar3 = 0;
- /* Setup Phys:PCI 1:1 outbound mem window @ MPC85XX_PCI2_LOWER_MEM */
+ /* Setup 512M Phys:PCI 1:1 outbound mem window @ 0xa0000000 */
pci->potar1 = (MPC85XX_PCI2_LOWER_MEM >> 12) & 0x000fffff;
pci->potear1 = 0x00000000;
pci->powbar1 = (MPC85XX_PCI2_LOWER_MEM >> 12) & 0x000fffff;
- /* Enable, Mem R/W */
- pci->powar1 = 0x80044000 |
- (__ilog2(MPC85XX_PCI1_UPPER_MEM - MPC85XX_PCI1_LOWER_MEM + 1) - 1);
+ pci->powar1 = 0x8004401c; /* Enable, Mem R/W, 512M */
- /* Setup outboud IO windows @ MPC85XX_PCI2_IO_BASE */
+ /* Setup 16M outboud IO windows @ 0xe3000000 */
pci->potar2 = 0x00000000;
pci->potear2 = 0x00000000;
pci->powbar2 = (MPC85XX_PCI2_IO_BASE >> 12) & 0x000fffff;
- /* Enable, IO R/W */
- pci->powar2 = 0x80088000 | (__ilog2(MPC85XX_PCI1_IO_SIZE) - 1);
+ pci->powar2 = 0x80088017; /* Enable, IO R/W, 16M */
/* Setup 2G inbound Memory Window @ 0 */
pci->pitar1 = 0x00000000;