#include <linux/notifier.h>
#include <linux/cpu.h>
#include <linux/unistd.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/rtas.h>
#include <asm/iommu.h>
-#include <asm/serial.h>
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
extern void udbg_init_pmac_realmode(void);
/* That's RTAS panel debug */
extern void call_rtas_display_status_delay(unsigned char c);
-/* Here's maple real mode debug */
-extern void udbg_init_maple_realmode(void);
#define EARLY_DEBUG_INIT() do {} while(0)
#if 0
#define EARLY_DEBUG_INIT() udbg_init_debug_lpar()
-#define EARLY_DEBUG_INIT() udbg_init_maple_realmode()
#define EARLY_DEBUG_INIT() udbg_init_pmac_realmode()
#define EARLY_DEBUG_INIT() \
do { ppc_md.udbg_putc = call_rtas_display_status_delay; } while(0)
extern void early_init_devtree(void *flat_dt);
extern void unflatten_device_tree(void);
-extern void smp_release_cpus(void);
-
unsigned long decr_overclock = 1;
unsigned long decr_overclock_proc0 = 1;
unsigned long decr_overclock_set = 0;
int have_of = 1;
int boot_cpuid = 0;
-int boot_cpuid_phys = 0;
dev_t boot_dev;
/*
{
struct device_node *dn = NULL;
int cpu = 0;
- int swap_cpuid = 0;
check_smt_enabled();
cpu_set(cpu, cpu_present_map);
set_hard_smp_processor_id(cpu, intserv[j]);
}
- if (intserv[j] == boot_cpuid_phys)
- swap_cpuid = cpu;
cpu_set(cpu, cpu_possible_map);
cpu++;
}
}
- /* Swap CPU id 0 with boot_cpuid_phys, so we can always assume that
- * boot cpu is logical 0.
- */
- if (boot_cpuid_phys != get_hard_smp_processor_id(0)) {
- u32 tmp;
- tmp = get_hard_smp_processor_id(0);
- set_hard_smp_processor_id(0, boot_cpuid_phys);
- set_hard_smp_processor_id(swap_cpuid, tmp);
- }
-
/*
* On pSeries LPAR, we need to know how many cpus
* could possibly be added to this partition.
extern struct machdep_calls pSeries_md;
extern struct machdep_calls pmac_md;
-extern struct machdep_calls maple_md;
/* Ultimately, stuff them in an elf section like initcalls... */
static struct machdep_calls __initdata *machines[] = {
#ifdef CONFIG_PPC_PMAC
&pmac_md,
#endif /* CONFIG_PPC_PMAC */
-#ifdef CONFIG_PPC_MAPLE
- &maple_md,
-#endif /* CONFIG_PPC_MAPLE */
NULL
};
* iSeries has already initialized the cpu maps at this point.
*/
setup_cpu_maps();
-
- /* Release secondary cpus out of their spinloops at 0x60 now that
- * we can map physical -> logical CPU ids
- */
- smp_release_cpus();
#endif /* defined(CONFIG_SMP) && !defined(CONFIG_PPC_ISERIES) */
printk("Starting Linux PPC64 %s\n", UTS_RELEASE);
printk("naca->debug_switch = 0x%lx\n", naca->debug_switch);
printk("naca->interrupt_controller = 0x%ld\n", naca->interrupt_controller);
printk("systemcfg = 0x%p\n", systemcfg);
- printk("systemcfg->platform = 0x%x\n", systemcfg->platform);
printk("systemcfg->processorCount = 0x%lx\n", systemcfg->processorCount);
printk("systemcfg->physicalMemorySize = 0x%lx\n", systemcfg->physicalMemorySize);
printk("systemcfg->dCacheL1LineSize = 0x%x\n", systemcfg->dCacheL1LineSize);
#ifdef CONFIG_PPC_MULTIPLATFORM
static int __init set_preferred_console(void)
{
- struct device_node *prom_stdout = NULL;
+ struct device_node *prom_stdout;
char *name;
- u32 *spd;
int offset = 0;
-
+#if 0
+ phandle *stdout_ph;
+#endif
DBG(" -> set_preferred_console()\n");
/* The user has requested a console so this is already set up. */
return -ENODEV;
}
/* We are getting a weird phandle from OF ... */
+#if 0
+ stdout_ph = (phandle *)get_property(of_chosen, "linux,stdout-package", NULL);
+ if (stdout_ph == NULL) {
+ DBG(" no linux,stdout-package !\n");
+ return -ENODEV;
+ }
+ prom_stdout = of_find_node_by_phandle(*stdout_ph);
+ if (!prom_stdout) {
+ DBG(" can't find stdout package for phandle 0x%x !\n", *stdout_ph);
+ return -ENODEV;
+ }
+#endif
/* ... So use the full path instead */
+#if 1
name = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
if (name == NULL) {
DBG(" no linux,stdout-path !\n");
DBG(" can't find stdout package %s !\n", name);
return -ENODEV;
}
+#endif
DBG("stdout is %s\n", prom_stdout->full_name);
name = (char *)get_property(prom_stdout, "name", NULL);
DBG(" stdout package has no name !\n");
goto not_found;
}
- spd = (u32 *)get_property(prom_stdout, "current-speed", NULL);
- if (0)
- ;
-#ifdef CONFIG_SERIAL_8250_CONSOLE
- else if (strcmp(name, "serial") == 0) {
+ if (strcmp(name, "serial") == 0) {
int i;
u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i);
if (i > 8) {
}
}
}
-#endif /* CONFIG_SERIAL_8250_CONSOLE */
#ifdef CONFIG_PPC_PSERIES
else if (strcmp(name, "vty") == 0) {
u32 *reg = (u32 *)get_property(prom_stdout, "reg", NULL);
}
}
#endif /* CONFIG_PPC_PSERIES */
-#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
else if (strcmp(name, "ch-a") == 0)
offset = 0;
else if (strcmp(name, "ch-b") == 0)
offset = 1;
-#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
else
goto not_found;
of_node_put(prom_stdout);
DBG("Found serial console at ttyS%d\n", offset);
- if (spd) {
- static char __initdata opt[16];
- sprintf(opt, "%d", *spd);
- return add_preferred_console("ttyS", offset, opt);
- } else
- return add_preferred_console("ttyS", offset, NULL);
+ return add_preferred_console("ttyS", offset, NULL);
not_found:
DBG("No preferred console found !\n");
/* set up the bootmem stuff with available memory */
do_init_bootmem();
- ppc_md.setup_arch();
-
/* Select the correct idle loop for the platform. */
idle_setup();
+ ppc_md.setup_arch();
+
paging_init();
ppc64_boot_msg(0x15, "Setup Done");
}
__setup("decr_overclock_proc0=", set_decr_overclock_proc0 );
__setup("decr_overclock=", set_decr_overclock );
-#ifndef CONFIG_PPC_ISERIES
-/*
- * This function can be used by platforms to "find" legacy serial ports.
- * It works for "serial" nodes under an "isa" node, and will try to
- * respect the "ibm,aix-loc" property if any. It works with up to 8
- * ports.
- */
-
-#define MAX_LEGACY_SERIAL_PORTS 8
-static struct plat_serial8250_port serial_ports[MAX_LEGACY_SERIAL_PORTS+1];
-static unsigned int old_serial_count;
-
-void __init generic_find_legacy_serial_ports(unsigned int *default_speed)
-{
- struct device_node *np;
- u32 *sizeprop;
-
- struct isa_reg_property {
- u32 space;
- u32 address;
- u32 size;
- };
- struct pci_reg_property {
- struct pci_address addr;
- u32 size_hi;
- u32 size_lo;
- };
-
- DBG(" -> generic_find_legacy_serial_port()\n");
-
- naca->serialPortAddr = 0;
- if (default_speed)
- *default_speed = 0;
-
- np = of_find_node_by_path("/");
- if (!np)
- return;
-
- /* First fill our array */
- for (np = NULL; (np = of_find_node_by_type(np, "serial"));) {
- struct device_node *isa, *pci;
- struct isa_reg_property *reg;
- unsigned long phys_size, addr_size, io_base;
- u32 *rangesp;
- u32 *interrupts, *clk, *spd;
- char *typep;
- int index, rlen, rentsize;
-
- /* Ok, first check if it's under an "isa" parent */
- isa = of_get_parent(np);
- if (!isa || strcmp(isa->name, "isa")) {
- DBG("%s: no isa parent found\n", np->full_name);
- continue;
- }
-
- /* Now look for an "ibm,aix-loc" property that gives us ordering
- * if any...
- */
- typep = (char *)get_property(np, "ibm,aix-loc", NULL);
-
- /* Get the ISA port number */
- reg = (struct isa_reg_property *)get_property(np, "reg", NULL);
- if (reg == NULL)
- goto next_port;
- /* We assume the interrupt number isn't translated ... */
- interrupts = (u32 *)get_property(np, "interrupts", NULL);
- /* get clock freq. if present */
- clk = (u32 *)get_property(np, "clock-frequency", NULL);
- /* get default speed if present */
- spd = (u32 *)get_property(np, "current-speed", NULL);
- /* Default to locate at end of array */
- index = old_serial_count; /* end of the array by default */
-
- /* If we have a location index, then use it */
- if (typep && *typep == 'S') {
- index = simple_strtol(typep+1, NULL, 0) - 1;
- /* if index is out of range, use end of array instead */
- if (index >= MAX_LEGACY_SERIAL_PORTS)
- index = old_serial_count;
- /* if our index is still out of range, that mean that
- * array is full, we could scan for a free slot but that
- * make little sense to bother, just skip the port
- */
- if (index >= MAX_LEGACY_SERIAL_PORTS)
- goto next_port;
- if (index >= old_serial_count)
- old_serial_count = index + 1;
- /* Check if there is a port who already claimed our slot */
- if (serial_ports[index].iobase != 0) {
- /* if we still have some room, move it, else override */
- if (old_serial_count < MAX_LEGACY_SERIAL_PORTS) {
- DBG("Moved legacy port %d -> %d\n", index,
- old_serial_count);
- serial_ports[old_serial_count++] =
- serial_ports[index];
- } else {
- DBG("Replacing legacy port %d\n", index);
- }
- }
- }
- if (index >= MAX_LEGACY_SERIAL_PORTS)
- goto next_port;
- if (index >= old_serial_count)
- old_serial_count = index + 1;
-
- /* Now fill the entry */
- memset(&serial_ports[index], 0, sizeof(struct plat_serial8250_port));
- serial_ports[index].uartclk = clk ? *clk : BASE_BAUD * 16;
- serial_ports[index].iobase = reg->address;
- serial_ports[index].irq = interrupts ? interrupts[0] : 0;
- serial_ports[index].flags = ASYNC_BOOT_AUTOCONF;
-
- DBG("Added legacy port, index: %d, port: %x, irq: %d, clk: %d\n",
- index,
- serial_ports[index].iobase,
- serial_ports[index].irq,
- serial_ports[index].uartclk);
-
- /* Get phys address of IO reg for port 1 */
- if (index != 0)
- goto next_port;
-
- pci = of_get_parent(isa);
- if (!pci) {
- DBG("%s: no pci parent found\n", np->full_name);
- goto next_port;
- }
-
- rangesp = (u32 *)get_property(pci, "ranges", &rlen);
- if (rangesp == NULL) {
- of_node_put(pci);
- goto next_port;
- }
- rlen /= 4;
-
- /* we need the #size-cells of the PCI bridge node itself */
- phys_size = 1;
- sizeprop = (u32 *)get_property(pci, "#size-cells", NULL);
- if (sizeprop != NULL)
- phys_size = *sizeprop;
- /* we need the parent #addr-cells */
- addr_size = prom_n_addr_cells(pci);
- rentsize = 3 + addr_size + phys_size;
- io_base = 0;
- for (;rlen >= rentsize; rlen -= rentsize,rangesp += rentsize) {
- if (((rangesp[0] >> 24) & 0x3) != 1)
- continue; /* not IO space */
- io_base = rangesp[3];
- if (addr_size == 2)
- io_base = (io_base << 32) | rangesp[4];
- }
- if (io_base != 0) {
- naca->serialPortAddr = io_base + reg->address;
- if (default_speed && spd)
- *default_speed = *spd;
- }
- of_node_put(pci);
- next_port:
- of_node_put(isa);
- }
-
- DBG(" <- generic_find_legacy_serial_port()\n");
-}
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = 0,
- .dev = {
- .platform_data = serial_ports,
- },
-};
-
-static int __init serial_dev_init(void)
-{
- return platform_device_register(&serial_device);
-}
-arch_initcall(serial_dev_init);
-
-#endif /* CONFIG_PPC_ISERIES */
-
-int check_legacy_ioport(unsigned long base_port)
-{
- if (ppc_md.check_legacy_ioport == NULL)
- return 0;
- return ppc_md.check_legacy_ioport(base_port);
-}
-EXPORT_SYMBOL(check_legacy_ioport);
-
#ifdef CONFIG_XMON
static int __init early_xmon(char *p)
{
/* ensure xmon is enabled */
xmon_init();
- debugger(NULL);
+ debugger(0);
return 0;
}
early_param("xmon", early_xmon);
#endif
-void cpu_die(void)
-{
- if (ppc_md.cpu_die)
- ppc_md.cpu_die();
- local_irq_disable();
- for (;;);
-}