/*
* arch/s390/kernel/head.S
*
- * S390 version
- * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
- * Author(s): Hartmut Penner (hp@de.ibm.com),
- * Martin Schwidefsky (schwidefsky@de.ibm.com),
- * Rob van der Heij (rvdhei@iae.nl)
+ * Copyright (C) IBM Corp. 1999,2006
+ *
+ * Author(s): Hartmut Penner <hp@de.ibm.com>
+ * Martin Schwidefsky <schwidefsky@de.ibm.com>
+ * Rob van der Heij <rvdhei@iae.nl>
+ * Heiko Carstens <heiko.carstens@de.ibm.com>
*
* There are 5 different IPL methods
* 1) load the image directly into ram at address 0 and do an PSW restart
* 5) direct call of start by the SALIPL loader
* We use the cpuid to distinguish between VM and native ipl
* params for kernel are pushed to 0x10400 (see setup.h)
-
- Changes:
- Okt 25 2000 <rvdheij@iae.nl>
- added code to skip HDR and EOF to allow SL tape IPL (5 retries)
- changed first CCW from rewind to backspace block
-
+ *
*/
-#include <linux/config.h>
#include <asm/setup.h>
#include <asm/lowcore.h>
-#include <asm/offsets.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/page.h>
+
+#ifdef CONFIG_64BIT
+#define ARCH_OFFSET 4
+#else
+#define ARCH_OFFSET 0
+#endif
#ifndef CONFIG_IPL
- .org 0
- .long 0x00080000,0x80000000+startup # Just a restart PSW
+ .org 0
+ .long 0x00080000,0x80000000+startup # Just a restart PSW
#else
#ifdef CONFIG_IPL_TAPE
#define IPL_BS 1024
- .org 0
- .long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded
- .long 0x27000000,0x60000001 # by ipl to addresses 0-23.
- .long 0x02000000,0x20000000+IPL_BS # (a PSW and two CCWs).
- .long 0x00000000,0x00000000 # external old psw
- .long 0x00000000,0x00000000 # svc old psw
- .long 0x00000000,0x00000000 # program check old psw
- .long 0x00000000,0x00000000 # machine check old psw
- .long 0x00000000,0x00000000 # io old psw
- .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
- .long 0x000a0000,0x00000058 # external new psw
- .long 0x000a0000,0x00000060 # svc new psw
- .long 0x000a0000,0x00000068 # program check new psw
- .long 0x000a0000,0x00000070 # machine check new psw
- .long 0x00080000,0x80000000+.Lioint # io new psw
-
- .org 0x100
+ .org 0
+ .long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded
+ .long 0x27000000,0x60000001 # by ipl to addresses 0-23.
+ .long 0x02000000,0x20000000+IPL_BS # (a PSW and two CCWs).
+ .long 0x00000000,0x00000000 # external old psw
+ .long 0x00000000,0x00000000 # svc old psw
+ .long 0x00000000,0x00000000 # program check old psw
+ .long 0x00000000,0x00000000 # machine check old psw
+ .long 0x00000000,0x00000000 # io old psw
+ .long 0x00000000,0x00000000
+ .long 0x00000000,0x00000000
+ .long 0x00000000,0x00000000
+ .long 0x000a0000,0x00000058 # external new psw
+ .long 0x000a0000,0x00000060 # svc new psw
+ .long 0x000a0000,0x00000068 # program check new psw
+ .long 0x000a0000,0x00000070 # machine check new psw
+ .long 0x00080000,0x80000000+.Lioint # io new psw
+
+ .org 0x100
#
# subroutine for loading from tape
-# Paramters:
+# Paramters:
# R1 = device number
# R2 = load address
-.Lloader:
- st %r14,.Lldret
- la %r3,.Lorbread # r3 = address of orb
- la %r5,.Lirb # r5 = address of irb
- st %r2,.Lccwread+4 # initialize CCW data addresses
- lctl %c6,%c6,.Lcr6
- slr %r2,%r2
+.Lloader:
+ st %r14,.Lldret
+ la %r3,.Lorbread # r3 = address of orb
+ la %r5,.Lirb # r5 = address of irb
+ st %r2,.Lccwread+4 # initialize CCW data addresses
+ lctl %c6,%c6,.Lcr6
+ slr %r2,%r2
.Lldlp:
- la %r6,3 # 3 retries
+ la %r6,3 # 3 retries
.Lssch:
- ssch 0(%r3) # load chunk of IPL_BS bytes
- bnz .Llderr
+ ssch 0(%r3) # load chunk of IPL_BS bytes
+ bnz .Llderr
.Lw4end:
- bas %r14,.Lwait4io
- tm 8(%r5),0x82 # do we have a problem ?
- bnz .Lrecov
- slr %r7,%r7
- icm %r7,3,10(%r5) # get residual count
- lcr %r7,%r7
- la %r7,IPL_BS(%r7) # IPL_BS-residual=#bytes read
- ar %r2,%r7 # add to total size
- tm 8(%r5),0x01 # found a tape mark ?
- bnz .Ldone
- l %r0,.Lccwread+4 # update CCW data addresses
- ar %r0,%r7
- st %r0,.Lccwread+4
- b .Lldlp
+ bas %r14,.Lwait4io
+ tm 8(%r5),0x82 # do we have a problem ?
+ bnz .Lrecov
+ slr %r7,%r7
+ icm %r7,3,10(%r5) # get residual count
+ lcr %r7,%r7
+ la %r7,IPL_BS(%r7) # IPL_BS-residual=#bytes read
+ ar %r2,%r7 # add to total size
+ tm 8(%r5),0x01 # found a tape mark ?
+ bnz .Ldone
+ l %r0,.Lccwread+4 # update CCW data addresses
+ ar %r0,%r7
+ st %r0,.Lccwread+4
+ b .Lldlp
.Ldone:
- l %r14,.Lldret
- br %r14 # r2 contains the total size
+ l %r14,.Lldret
+ br %r14 # r2 contains the total size
.Lrecov:
- bas %r14,.Lsense # do the sensing
- bct %r6,.Lssch # dec. retry count & branch
- b .Llderr
+ bas %r14,.Lsense # do the sensing
+ bct %r6,.Lssch # dec. retry count & branch
+ b .Llderr
#
# Sense subroutine
#
.Lsense:
- st %r14,.Lsnsret
- la %r7,.Lorbsense
- ssch 0(%r7) # start sense command
- bnz .Llderr
- bas %r14,.Lwait4io
- l %r14,.Lsnsret
- tm 8(%r5),0x82 # do we have a problem ?
- bnz .Llderr
- br %r14
+ st %r14,.Lsnsret
+ la %r7,.Lorbsense
+ ssch 0(%r7) # start sense command
+ bnz .Llderr
+ bas %r14,.Lwait4io
+ l %r14,.Lsnsret
+ tm 8(%r5),0x82 # do we have a problem ?
+ bnz .Llderr
+ br %r14
#
# Wait for interrupt subroutine
#
.Lwait4io:
- lpsw .Lwaitpsw
+ lpsw .Lwaitpsw
.Lioint:
- c %r1,0xb8 # compare subchannel number
- bne .Lwait4io
- tsch 0(%r5)
- slr %r0,%r0
- tm 8(%r5),0x82 # do we have a problem ?
- bnz .Lwtexit
- tm 8(%r5),0x04 # got device end ?
- bz .Lwait4io
+ c %r1,0xb8 # compare subchannel number
+ bne .Lwait4io
+ tsch 0(%r5)
+ slr %r0,%r0
+ tm 8(%r5),0x82 # do we have a problem ?
+ bnz .Lwtexit
+ tm 8(%r5),0x04 # got device end ?
+ bz .Lwait4io
.Lwtexit:
- br %r14
+ br %r14
.Llderr:
- lpsw .Lcrash
+ lpsw .Lcrash
- .align 8
+ .align 8
.Lorbread:
- .long 0x00000000,0x0080ff00,.Lccwread
- .align 8
+ .long 0x00000000,0x0080ff00,.Lccwread
+ .align 8
.Lorbsense:
- .long 0x00000000,0x0080ff00,.Lccwsense
- .align 8
+ .long 0x00000000,0x0080ff00,.Lccwsense
+ .align 8
.Lccwread:
- .long 0x02200000+IPL_BS,0x00000000
+ .long 0x02200000+IPL_BS,0x00000000
.Lccwsense:
- .long 0x04200001,0x00000000
+ .long 0x04200001,0x00000000
.Lwaitpsw:
- .long 0x020a0000,0x80000000+.Lioint
+ .long 0x020a0000,0x80000000+.Lioint
-.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-.Lcr6: .long 0xff000000
- .align 8
-.Lcrash:.long 0x000a0000,0x00000000
-.Lldret:.long 0
+.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
+.Lcr6: .long 0xff000000
+ .align 8
+.Lcrash:.long 0x000a0000,0x00000000
+.Lldret:.long 0
.Lsnsret: .long 0
-#endif /* CONFIG_IPL_TAPE */
+#endif /* CONFIG_IPL_TAPE */
#ifdef CONFIG_IPL_VM
-#define IPL_BS 0x730
- .org 0
- .long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded
- .long 0x02000018,0x60000050 # by ipl to addresses 0-23.
- .long 0x02000068,0x60000050 # (a PSW and two CCWs).
- .fill 80-24,1,0x40 # bytes 24-79 are discarded !!
- .long 0x020000f0,0x60000050 # The next 160 byte are loaded
- .long 0x02000140,0x60000050 # to addresses 0x18-0xb7
- .long 0x02000190,0x60000050 # They form the continuation
- .long 0x020001e0,0x60000050 # of the CCW program started
- .long 0x02000230,0x60000050 # by ipl and load the range
- .long 0x02000280,0x60000050 # 0x0f0-0x730 from the image
- .long 0x020002d0,0x60000050 # to the range 0x0f0-0x730
- .long 0x02000320,0x60000050 # in memory. At the end of
- .long 0x02000370,0x60000050 # the channel program the PSW
- .long 0x020003c0,0x60000050 # at location 0 is loaded.
- .long 0x02000410,0x60000050 # Initial processing starts
- .long 0x02000460,0x60000050 # at 0xf0 = iplstart.
- .long 0x020004b0,0x60000050
- .long 0x02000500,0x60000050
- .long 0x02000550,0x60000050
- .long 0x020005a0,0x60000050
- .long 0x020005f0,0x60000050
- .long 0x02000640,0x60000050
- .long 0x02000690,0x60000050
- .long 0x020006e0,0x20000050
-
- .org 0xf0
+#define IPL_BS 0x730
+ .org 0
+ .long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded
+ .long 0x02000018,0x60000050 # by ipl to addresses 0-23.
+ .long 0x02000068,0x60000050 # (a PSW and two CCWs).
+ .fill 80-24,1,0x40 # bytes 24-79 are discarded !!
+ .long 0x020000f0,0x60000050 # The next 160 byte are loaded
+ .long 0x02000140,0x60000050 # to addresses 0x18-0xb7
+ .long 0x02000190,0x60000050 # They form the continuation
+ .long 0x020001e0,0x60000050 # of the CCW program started
+ .long 0x02000230,0x60000050 # by ipl and load the range
+ .long 0x02000280,0x60000050 # 0x0f0-0x730 from the image
+ .long 0x020002d0,0x60000050 # to the range 0x0f0-0x730
+ .long 0x02000320,0x60000050 # in memory. At the end of
+ .long 0x02000370,0x60000050 # the channel program the PSW
+ .long 0x020003c0,0x60000050 # at location 0 is loaded.
+ .long 0x02000410,0x60000050 # Initial processing starts
+ .long 0x02000460,0x60000050 # at 0xf0 = iplstart.
+ .long 0x020004b0,0x60000050
+ .long 0x02000500,0x60000050
+ .long 0x02000550,0x60000050
+ .long 0x020005a0,0x60000050
+ .long 0x020005f0,0x60000050
+ .long 0x02000640,0x60000050
+ .long 0x02000690,0x60000050
+ .long 0x020006e0,0x20000050
+
+ .org 0xf0
#
# subroutine for loading cards from the reader
#
-.Lloader:
- la %r3,.Lorb # r2 = address of orb into r2
- la %r5,.Lirb # r4 = address of irb
- la %r6,.Lccws
- la %r7,20
+.Lloader:
+ la %r3,.Lorb # r2 = address of orb into r2
+ la %r5,.Lirb # r4 = address of irb
+ la %r6,.Lccws
+ la %r7,20
.Linit:
- st %r2,4(%r6) # initialize CCW data addresses
- la %r2,0x50(%r2)
- la %r6,8(%r6)
- bct 7,.Linit
+ st %r2,4(%r6) # initialize CCW data addresses
+ la %r2,0x50(%r2)
+ la %r6,8(%r6)
+ bct 7,.Linit
- lctl %c6,%c6,.Lcr6 # set IO subclass mask
- slr %r2,%r2
+ lctl %c6,%c6,.Lcr6 # set IO subclass mask
+ slr %r2,%r2
.Lldlp:
- ssch 0(%r3) # load chunk of 1600 bytes
- bnz .Llderr
+ ssch 0(%r3) # load chunk of 1600 bytes
+ bnz .Llderr
.Lwait4irq:
- mvc __LC_IO_NEW_PSW(8),.Lnewpsw # set up IO interrupt psw
- lpsw .Lwaitpsw
+ mvc 0x78(8),.Lnewpsw # set up IO interrupt psw
+ lpsw .Lwaitpsw
.Lioint:
- c %r1,0xb8 # compare subchannel number
- bne .Lwait4irq
- tsch 0(%r5)
-
- slr %r0,%r0
- ic %r0,8(%r5) # get device status
- chi %r0,8 # channel end ?
- be .Lcont
- chi %r0,12 # channel end + device end ?
- be .Lcont
-
- l %r0,4(%r5)
- s %r0,8(%r3) # r0/8 = number of ccws executed
- mhi %r0,10 # *10 = number of bytes in ccws
- lh %r3,10(%r5) # get residual count
- sr %r0,%r3 # #ccws*80-residual=#bytes read
- ar %r2,%r0
-
- br %r14 # r2 contains the total size
+ c %r1,0xb8 # compare subchannel number
+ bne .Lwait4irq
+ tsch 0(%r5)
+
+ slr %r0,%r0
+ ic %r0,8(%r5) # get device status
+ chi %r0,8 # channel end ?
+ be .Lcont
+ chi %r0,12 # channel end + device end ?
+ be .Lcont
+
+ l %r0,4(%r5)
+ s %r0,8(%r3) # r0/8 = number of ccws executed
+ mhi %r0,10 # *10 = number of bytes in ccws
+ lh %r3,10(%r5) # get residual count
+ sr %r0,%r3 # #ccws*80-residual=#bytes read
+ ar %r2,%r0
+
+ br %r14 # r2 contains the total size
.Lcont:
- ahi %r2,0x640 # add 0x640 to total size
- la %r6,.Lccws
- la %r7,20
+ ahi %r2,0x640 # add 0x640 to total size
+ la %r6,.Lccws
+ la %r7,20
.Lincr:
- l %r0,4(%r6) # update CCW data addresses
- ahi %r0,0x640
- st %r0,4(%r6)
- ahi %r6,8
- bct 7,.Lincr
+ l %r0,4(%r6) # update CCW data addresses
+ ahi %r0,0x640
+ st %r0,4(%r6)
+ ahi %r6,8
+ bct 7,.Lincr
- b .Lldlp
+ b .Lldlp
.Llderr:
- lpsw .Lcrash
-
- .align 8
-.Lorb: .long 0x00000000,0x0080ff00,.Lccws
-.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-.Lcr6: .long 0xff000000
-.Lloadp:.long 0,0
- .align 8
-.Lcrash:.long 0x000a0000,0x00000000
+ lpsw .Lcrash
+
+ .align 8
+.Lorb: .long 0x00000000,0x0080ff00,.Lccws
+.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
+.Lcr6: .long 0xff000000
+.Lloadp:.long 0,0
+ .align 8
+.Lcrash:.long 0x000a0000,0x00000000
.Lnewpsw:
- .long 0x00080000,0x80000000+.Lioint
+ .long 0x00080000,0x80000000+.Lioint
.Lwaitpsw:
- .long 0x020a0000,0x80000000+.Lioint
+ .long 0x020a0000,0x80000000+.Lioint
- .align 8
-.Lccws: .rept 19
- .long 0x02600050,0x00000000
- .endr
- .long 0x02200050,0x00000000
-#endif /* CONFIG_IPL_VM */
+ .align 8
+.Lccws: .rept 19
+ .long 0x02600050,0x00000000
+ .endr
+ .long 0x02200050,0x00000000
+#endif /* CONFIG_IPL_VM */
iplstart:
- lh %r1,0xb8 # test if subchannel number
- bct %r1,.Lnoload # is valid
- l %r1,0xb8 # load ipl subchannel number
- la %r2,IPL_BS # load start address
- bas %r14,.Lloader # load rest of ipl image
- l %r12,.Lparm # pointer to parameter area
- st %r1,IPL_DEVICE-PARMAREA(%r12) # store ipl device number
+ lh %r1,0xb8 # test if subchannel number
+ bct %r1,.Lnoload # is valid
+ l %r1,0xb8 # load ipl subchannel number
+ la %r2,IPL_BS # load start address
+ bas %r14,.Lloader # load rest of ipl image
+ l %r12,.Lparm # pointer to parameter area
+ st %r1,IPL_DEVICE+ARCH_OFFSET-PARMAREA(%r12) # save ipl device number
#
# load parameter file from ipl device
#
.Lagain1:
- l %r2,INITRD_START-PARMAREA(%r12) # use ramdisk location as temp
- bas %r14,.Lloader # load parameter file
- ltr %r2,%r2 # got anything ?
- bz .Lnopf
- chi %r2,895
- bnh .Lnotrunc
- la %r2,895
+ l %r2,.Linitrd # ramdisk loc. is temp
+ bas %r14,.Lloader # load parameter file
+ ltr %r2,%r2 # got anything ?
+ bz .Lnopf
+ chi %r2,895
+ bnh .Lnotrunc
+ la %r2,895
.Lnotrunc:
- l %r4,INITRD_START-PARMAREA(%r12)
- clc 0(3,%r4),.L_hdr # if it is HDRx
- bz .Lagain1 # skip dataset header
- clc 0(3,%r4),.L_eof # if it is EOFx
- bz .Lagain1 # skip dateset trailer
- la %r5,0(%r4,%r2)
- lr %r3,%r2
+ l %r4,.Linitrd
+ clc 0(3,%r4),.L_hdr # if it is HDRx
+ bz .Lagain1 # skip dataset header
+ clc 0(3,%r4),.L_eof # if it is EOFx
+ bz .Lagain1 # skip dateset trailer
+ la %r5,0(%r4,%r2)
+ lr %r3,%r2
.Lidebc:
- tm 0(%r5),0x80 # high order bit set ?
- bo .Ldocv # yes -> convert from EBCDIC
- ahi %r5,-1
- bct %r3,.Lidebc
- b .Lnocv
+ tm 0(%r5),0x80 # high order bit set ?
+ bo .Ldocv # yes -> convert from EBCDIC
+ ahi %r5,-1
+ bct %r3,.Lidebc
+ b .Lnocv
.Ldocv:
- l %r3,.Lcvtab
- tr 0(256,%r4),0(%r3) # convert parameters to ascii
- tr 256(256,%r4),0(%r3)
- tr 512(256,%r4),0(%r3)
- tr 768(122,%r4),0(%r3)
-.Lnocv: la %r3,COMMAND_LINE-PARMAREA(%r12) # load adr. of command line
- mvc 0(256,%r3),0(%r4)
- mvc 256(256,%r3),256(%r4)
- mvc 512(256,%r3),512(%r4)
- mvc 768(122,%r3),768(%r4)
- slr %r0,%r0
- b .Lcntlp
+ l %r3,.Lcvtab
+ tr 0(256,%r4),0(%r3) # convert parameters to ascii
+ tr 256(256,%r4),0(%r3)
+ tr 512(256,%r4),0(%r3)
+ tr 768(122,%r4),0(%r3)
+.Lnocv: la %r3,COMMAND_LINE-PARMAREA(%r12) # load adr. of command line
+ mvc 0(256,%r3),0(%r4)
+ mvc 256(256,%r3),256(%r4)
+ mvc 512(256,%r3),512(%r4)
+ mvc 768(122,%r3),768(%r4)
+ slr %r0,%r0
+ b .Lcntlp
.Ldelspc:
- ic %r0,0(%r2,%r3)
- chi %r0,0x20 # is it a space ?
- be .Lcntlp
- ahi %r2,1
- b .Leolp
+ ic %r0,0(%r2,%r3)
+ chi %r0,0x20 # is it a space ?
+ be .Lcntlp
+ ahi %r2,1
+ b .Leolp
.Lcntlp:
- brct %r2,.Ldelspc
+ brct %r2,.Ldelspc
.Leolp:
- slr %r0,%r0
- stc %r0,0(%r2,%r3) # terminate buffer
+ slr %r0,%r0
+ stc %r0,0(%r2,%r3) # terminate buffer
.Lnopf:
#
# load ramdisk from ipl device
-#
+#
.Lagain2:
- l %r2,INITRD_START-PARMAREA(%r12) # load adr. of ramdisk
- bas %r14,.Lloader # load ramdisk
- st %r2,INITRD_SIZE-PARMAREA(%r12) # store size of ramdisk
- ltr %r2,%r2
- bnz .Lrdcont
- st %r2,INITRD_START-PARMAREA(%r12) # no ramdisk found, null it
+ l %r2,.Linitrd # addr of ramdisk
+ st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12)
+ bas %r14,.Lloader # load ramdisk
+ st %r2,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r12) # store size of rd
+ ltr %r2,%r2
+ bnz .Lrdcont
+ st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # no ramdisk found
.Lrdcont:
- l %r2,INITRD_START-PARMAREA(%r12)
+ l %r2,.Linitrd
- clc 0(3,%r2),.L_hdr # skip HDRx and EOFx
- bz .Lagain2
- clc 0(3,%r2),.L_eof
- bz .Lagain2
+ clc 0(3,%r2),.L_hdr # skip HDRx and EOFx
+ bz .Lagain2
+ clc 0(3,%r2),.L_eof
+ bz .Lagain2
#ifdef CONFIG_IPL_VM
#
# reset files in VM reader
#
- stidp __LC_CPUID # store cpuid
- tm __LC_CPUID,0xff # running VM ?
- bno .Lnoreset
- la %r2,.Lreset
- lhi %r3,26
- .long 0x83230008
+ stidp __LC_CPUID # store cpuid
+ tm __LC_CPUID,0xff # running VM ?
+ bno .Lnoreset
+ la %r2,.Lreset
+ lhi %r3,26
+ diag %r2,%r3,8
+ la %r5,.Lirb
+ stsch 0(%r5) # check if irq is pending
+ tm 30(%r5),0x0f # by verifying if any of the
+ bnz .Lwaitforirq # activity or status control
+ tm 31(%r5),0xff # bits is set in the schib
+ bz .Lnoreset
+.Lwaitforirq:
+ mvc 0x78(8),.Lrdrnewpsw # set up IO interrupt psw
+.Lwaitrdrirq:
+ lpsw .Lrdrwaitpsw
+.Lrdrint:
+ c %r1,0xb8 # compare subchannel number
+ bne .Lwaitrdrirq
+ la %r5,.Lirb
+ tsch 0(%r5)
.Lnoreset:
+ b .Lnoload
+
+ .align 8
+.Lrdrnewpsw:
+ .long 0x00080000,0x80000000+.Lrdrint
+.Lrdrwaitpsw:
+ .long 0x020a0000,0x80000000+.Lrdrint
#endif
-
+
#
# everything loaded, go for it
#
.Lnoload:
- l %r1,.Lstartup
- br %r1
+ l %r1,.Lstartup
+ br %r1
+.Linitrd:.long _end + 0x400000 # default address of initrd
.Lparm: .long PARMAREA
.Lstartup: .long startup
-.Lcvtab:.long _ebcasc # ebcdic to ascii table
-.Lreset:.byte 0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40
- .byte 0xc1,0xd3,0xd3,0x40,0xd2,0xc5,0xc5,0xd7,0x40,0xd5,0xd6
- .byte 0xc8,0xd6,0xd3,0xc4 # "change rdr all keep nohold"
-.L_eof: .long 0xc5d6c600 /* C'EOF' */
-.L_hdr: .long 0xc8c4d900 /* C'HDR' */
+.Lcvtab:.long _ebcasc # ebcdic to ascii table
+.Lreset:.byte 0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40
+ .byte 0xc1,0xd3,0xd3,0x40,0xd2,0xc5,0xc5,0xd7,0x40,0xd5,0xd6
+ .byte 0xc8,0xd6,0xd3,0xc4 # "change rdr all keep nohold"
+.L_eof: .long 0xc5d6c600 /* C'EOF' */
+.L_hdr: .long 0xc8c4d900 /* C'HDR' */
-#endif /* CONFIG_IPL */
+#endif /* CONFIG_IPL */
#
# SALIPL loader support. Based on a patch by Rob van der Heij.
# This entry point is called directly from the SALIPL loader and
# doesn't need a builtin ipl record.
#
- .org 0x800
- .globl start
+ .org 0x800
+ .globl start
start:
- stm %r0,%r15,0x07b0 # store registers
- basr %r12,%r0
+ stm %r0,%r15,0x07b0 # store registers
+ basr %r12,%r0
.base:
- l %r11,.parm
- l %r8,.cmd # pointer to command buffer
+ l %r11,.parm
+ l %r8,.cmd # pointer to command buffer
- ltr %r9,%r9 # do we have SALIPL parameters?
- bp .sk8x8
+ ltr %r9,%r9 # do we have SALIPL parameters?
+ bp .sk8x8
- mvc 0(64,%r8),0x00b0 # copy saved registers
- xc 64(240-64,%r8),0(%r8) # remainder of buffer
- tr 0(64,%r8),.lowcase
- b .gotr
+ mvc 0(64,%r8),0x00b0 # copy saved registers
+ xc 64(240-64,%r8),0(%r8) # remainder of buffer
+ tr 0(64,%r8),.lowcase
+ b .gotr
.sk8x8:
- mvc 0(240,%r8),0(%r9) # copy iplparms into buffer
+ mvc 0(240,%r8),0(%r9) # copy iplparms into buffer
.gotr:
- l %r10,.tbl # EBCDIC to ASCII table
- tr 0(240,%r8),0(%r10)
- stidp __LC_CPUID # Are we running on VM maybe
- cli __LC_CPUID,0xff
- bnz .test
- .long 0x83300060 # diag 3,0,x'0060' - storage size
- b .done
-.test:
- mvc 0x68(8),.pgmnw # set up pgm check handler
- l %r2,.fourmeg
- lr %r3,%r2
- bctr %r3,%r0 # 4M-1
-.loop: iske %r0,%r3
- ar %r3,%r2
-.pgmx:
- sr %r3,%r2
- la %r3,1(%r3)
-.done:
- l %r1,.memsize
- st %r3,0(%r1)
- slr %r0,%r0
- st %r0,INITRD_SIZE-PARMAREA(%r11)
- st %r0,INITRD_START-PARMAREA(%r11)
- j startup # continue with startup
-.tbl: .long _ebcasc # translate table
-.cmd: .long COMMAND_LINE # address of command line buffer
-.parm: .long PARMAREA
-.memsize: .long memory_size
-.fourmeg: .long 0x00400000 # 4M
-.pgmnw: .long 0x00080000,.pgmx
+ l %r10,.tbl # EBCDIC to ASCII table
+ tr 0(240,%r8),0(%r10)
+ slr %r0,%r0
+ st %r0,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r11)
+ st %r0,INITRD_START+ARCH_OFFSET-PARMAREA(%r11)
+ j startup # continue with startup
+.tbl: .long _ebcasc # translate table
+.cmd: .long COMMAND_LINE # address of command line buffer
+.parm: .long PARMAREA
.lowcase:
- .byte 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07
+ .byte 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07
.byte 0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f
- .byte 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17
+ .byte 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17
.byte 0x18,0x19,0x1a,0x1b,0x1c,0x1d,0x1e,0x1f
- .byte 0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27
+ .byte 0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27
.byte 0x28,0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f
- .byte 0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37
+ .byte 0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37
.byte 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f
- .byte 0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47
+ .byte 0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47
.byte 0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f
- .byte 0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57
+ .byte 0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57
.byte 0x58,0x59,0x5a,0x5b,0x5c,0x5d,0x5e,0x5f
- .byte 0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67
+ .byte 0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67
.byte 0x68,0x69,0x6a,0x6b,0x6c,0x6d,0x6e,0x6f
- .byte 0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77
+ .byte 0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77
.byte 0x78,0x79,0x7a,0x7b,0x7c,0x7d,0x7e,0x7f
- .byte 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87
+ .byte 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87
.byte 0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f
- .byte 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97
+ .byte 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97
.byte 0x98,0x99,0x9a,0x9b,0x9c,0x9d,0x9e,0x9f
- .byte 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7
+ .byte 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7
.byte 0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf
- .byte 0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7
+ .byte 0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7
.byte 0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0xbe,0xbf
- .byte 0xc0,0x81,0x82,0x83,0x84,0x85,0x86,0x87 # .abcdefg
+ .byte 0xc0,0x81,0x82,0x83,0x84,0x85,0x86,0x87 # .abcdefg
.byte 0x88,0x89,0xca,0xcb,0xcc,0xcd,0xce,0xcf # hi
- .byte 0xd0,0x91,0x92,0x93,0x94,0x95,0x96,0x97 # .jklmnop
+ .byte 0xd0,0x91,0x92,0x93,0x94,0x95,0x96,0x97 # .jklmnop
.byte 0x98,0x99,0xda,0xdb,0xdc,0xdd,0xde,0xdf # qr
.byte 0xe0,0xe1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7 # ..stuvwx
.byte 0xa8,0xa9,0xea,0xeb,0xec,0xed,0xee,0xef # yz
- .byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7
+ .byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7
.byte 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff
-#
-# startup-code at 0x10000, running in real mode
-# this is called either by the ipl loader or directly by PSW restart
-# or linload or SALIPL
-#
- .org 0x10000
-startup:basr %r13,0 # get base
-.LPG1: lctl %c0,%c15,.Lctl-.LPG1(%r13) # load control registers
- la %r12,_pstart-.LPG1(%r13) # pointer to parameter area
- # move IPL device to lowcore
- mvc __LC_IPLDEV(4),IPL_DEVICE-PARMAREA(%r12)
-
-#
-# clear bss memory
-#
- l %r2,.Lbss_bgn-.LPG1(%r13) # start of bss
- l %r3,.Lbss_end-.LPG1(%r13) # end of bss
- sr %r3,%r2 # length of bss
- sr %r4,%r4 #
- sr %r5,%r5 # set src,length and pad to zero
- sr %r0,%r0 #
- mvcle %r2,%r4,0 # clear mem
- jo .-4 # branch back, if not finish
-
- l %r2,.Lrcp-.LPG1(%r13) # Read SCP forced command word
-.Lservicecall:
- stosm .Lpmask-.LPG1(%r13),0x01 # authorize ext interrupts
-
- stctl %r0, %r0,.Lcr-.LPG1(%r13) # get cr0
- la %r1,0x200 # set bit 22
- o %r1,.Lcr-.LPG1(%r13) # or old cr0 with r1
- st %r1,.Lcr-.LPG1(%r13)
- lctl %r0, %r0,.Lcr-.LPG1(%r13) # load modified cr0
-
- mvc __LC_EXT_NEW_PSW(8),.Lpcext-.LPG1(%r13) # set postcall psw
- la %r1, .Lsclph-.LPG1(%r13)
- a %r1,__LC_EXT_NEW_PSW+4 # set handler
- st %r1,__LC_EXT_NEW_PSW+4
-
- la %r4,_pstart-.LPG1(%r13) # %r4 is our index for sccb stuff
- la %r1, .Lsccb-PARMAREA(%r4) # our sccb
- .insn rre,0xb2200000,%r2,%r1 # service call
- ipm %r1
- srl %r1,28 # get cc code
- xr %r3, %r3
- chi %r1,3
- be .Lfchunk-.LPG1(%r13) # leave
- chi %r1,2
- be .Lservicecall-.LPG1(%r13)
- lpsw .Lwaitsclp-.LPG1(%r13)
-.Lsclph:
- lh %r1,.Lsccbr-PARMAREA(%r4)
- chi %r1,0x10 # 0x0010 is the sucess code
- je .Lprocsccb # let's process the sccb
- chi %r1,0x1f0
- bne .Lfchunk-.LPG1(%r13) # unhandled error code
- c %r2, .Lrcp-.LPG1(%r13) # Did we try Read SCP forced
- bne .Lfchunk-.LPG1(%r13) # if no, give up
- l %r2, .Lrcp2-.LPG1(%r13) # try with Read SCP
- b .Lservicecall-.LPG1(%r13)
-.Lprocsccb:
- lh %r1,.Lscpincr1-PARMAREA(%r4) # use this one if != 0
- chi %r1,0x00
- jne .Lscnd
- l %r1,.Lscpincr2-PARMAREA(%r4) # otherwise use this one
-.Lscnd:
- xr %r3,%r3 # same logic
- ic %r3,.Lscpa1-PARMAREA(%r4)
- chi %r3,0x00
- jne .Lcompmem
- l %r3,.Lscpa2-PARMAREA(%r13)
-.Lcompmem:
- mr %r2,%r1 # mem in MB on 128-bit
- l %r1,.Lonemb-.LPG1(%r13)
- mr %r2,%r1 # mem size in bytes in %r3
- b .Lfchunk-.LPG1(%r13)
-
-.Lpmask:
- .byte 0
-.align 8
-.Lpcext:.long 0x00080000,0x80000000
-.Lcr:
- .long 0x00 # place holder for cr0
-.Lwaitsclp:
- .long 0x020A0000
- .long .Lsclph
-.Lrcp:
- .int 0x00120001 # Read SCP forced code
-.Lrcp2:
- .int 0x00020001 # Read SCP code
-.Lonemb:
- .int 0x100000
-.Lfchunk:
-
-#
-# find memory chunks.
-#
- lr %r9,%r3 # end of mem
- mvc __LC_PGM_NEW_PSW(8),.Lpcmem-.LPG1(%r13)
- la %r1,1 # test in increments of 128KB
- sll %r1,17
- l %r3,.Lmchunk-.LPG1(%r13) # get pointer to memory_chunk array
- slr %r4,%r4 # set start of chunk to zero
- slr %r5,%r5 # set end of chunk to zero
- slr %r6,%r6 # set access code to zero
- la %r10, MEMORY_CHUNKS # number of chunks
-.Lloop:
- tprot 0(%r5),0 # test protection of first byte
- ipm %r7
- srl %r7,28
- clr %r6,%r7 # compare cc with last access code
- be .Lsame-.LPG1(%r13)
- b .Lchkmem-.LPG1(%r13)
-.Lsame:
- ar %r5,%r1 # add 128KB to end of chunk
- bno .Lloop-.LPG1(%r13) # r1 < 0x80000000 -> loop
-.Lchkmem: # > 2GB or tprot got a program check
- clr %r4,%r5 # chunk size > 0?
- be .Lchkloop-.LPG1(%r13)
- st %r4,0(%r3) # store start address of chunk
- lr %r0,%r5
- slr %r0,%r4
- st %r0,4(%r3) # store size of chunk
- st %r6,8(%r3) # store type of chunk
- la %r3,12(%r3)
- l %r4,.Lmemsize-.LPG1(%r13) # address of variable memory_size
- st %r5,0(%r4) # store last end to memory size
- ahi %r10,-1 # update chunk number
-.Lchkloop:
- lr %r6,%r7 # set access code to last cc
- # we got an exception or we're starting a new
- # chunk , we must check if we should
- # still try to find valid memory (if we detected
- # the amount of available storage), and if we
- # have chunks left
- xr %r0,%r0
- clr %r0,%r9 # did we detect memory?
- je .Ldonemem # if not, leave
- chi %r10,0 # do we have chunks left?
- je .Ldonemem
- alr %r5,%r1 # add 128KB to end of chunk
- lr %r4,%r5 # potential new chunk
- clr %r5,%r9 # should we go on?
- jl .Lloop
-.Ldonemem:
- l %r12,.Lmflags-.LPG1(%r13) # get address of machine_flags
-#
-# find out if we are running under VM
-#
- stidp __LC_CPUID # store cpuid
- tm __LC_CPUID,0xff # running under VM ?
- bno .Lnovm-.LPG1(%r13)
- oi 3(%r12),1 # set VM flag
-.Lnovm:
- lh %r0,__LC_CPUID+4 # get cpu version
- chi %r0,0x7490 # running on a P/390 ?
- bne .Lnop390-.LPG1(%r13)
- oi 3(%r12),4 # set P/390 flag
-.Lnop390:
-
-#
-# find out if we have an IEEE fpu
-#
- mvc __LC_PGM_NEW_PSW(8),.Lpcfpu-.LPG1(%r13)
- efpc %r0,0 # test IEEE extract fpc instruction
- oi 3(%r12),2 # set IEEE fpu flag
-.Lchkfpu:
-
-#
-# find out if we have the CSP instruction
-#
- mvc __LC_PGM_NEW_PSW(8),.Lpccsp-.LPG1(%r13)
- la %r0,0
- lr %r1,%r0
- la %r2,4
- csp %r0,%r2 # Test CSP instruction
- oi 3(%r12),8 # set CSP flag
-.Lchkcsp:
-
-#
-# find out if we have the MVPG instruction
-#
- mvc __LC_PGM_NEW_PSW(8),.Lpcmvpg-.LPG1(%r13)
- sr %r0,%r0
- la %r1,0
- la %r2,0
- mvpg %r1,%r2 # Test CSP instruction
- oi 3(%r12),16 # set MVPG flag
-.Lchkmvpg:
-
-#
-# find out if we have the IDTE instruction
-#
- mvc __LC_PGM_NEW_PSW(8),.Lpcidte-.LPG1(%r13)
- .long 0xb2b10000 # store facility list
- tm 0xc8,0x08 # check bit for clearing-by-ASCE
- bno .Lchkidte-.LPG1(%r13)
- lhi %r1,2094
- lhi %r2,0
- .long 0xb98e2001
- oi 3(%r12),0x80 # set IDTE flag
-.Lchkidte:
-
- lpsw .Lentry-.LPG1(13) # jump to _stext in primary-space,
- # virtual and never return ...
- .align 8
-.Lentry:.long 0x00080000,0x80000000 + _stext
-.Lctl: .long 0x04b50002 # cr0: various things
- .long 0 # cr1: primary space segment table
- .long .Lduct # cr2: dispatchable unit control table
- .long 0 # cr3: instruction authorization
- .long 0 # cr4: instruction authorization
- .long 0xffffffff # cr5: primary-aste origin
- .long 0 # cr6: I/O interrupts
- .long 0 # cr7: secondary space segment table
- .long 0 # cr8: access registers translation
- .long 0 # cr9: tracing off
- .long 0 # cr10: tracing off
- .long 0 # cr11: tracing off
- .long 0 # cr12: tracing off
- .long 0 # cr13: home space segment table
- .long 0xc0000000 # cr14: machine check handling off
- .long 0 # cr15: linkage stack operations
-.Lpcmem:.long 0x00080000,0x80000000 + .Lchkmem
-.Lpcfpu:.long 0x00080000,0x80000000 + .Lchkfpu
-.Lpccsp:.long 0x00080000,0x80000000 + .Lchkcsp
-.Lpcmvpg:.long 0x00080000,0x80000000 + .Lchkmvpg
-.Lpcidte:.long 0x00080000,0x80000000 + .Lchkidte
-.Lmemsize:.long memory_size
-.Lmchunk:.long memory_chunk
-.Lmflags:.long machine_flags
-.Lbss_bgn: .long __bss_start
-.Lbss_end: .long _end
-
- .org PARMAREA-64
-.Lduct: .long 0,0,0,0,0,0,0,0
- .long 0,0,0,0,0,0,0,0
-
-#
-# params at 10400 (setup.h)
-#
- .org PARMAREA
- .global _pstart
-_pstart:
- .long 0,0 # IPL_DEVICE
- .long 0,RAMDISK_ORIGIN # INITRD_START
- .long 0,RAMDISK_SIZE # INITRD_SIZE
-
- .org COMMAND_LINE
- .byte "root=/dev/ram0 ro"
- .byte 0
- .org 0x11000
-.Lsccb:
- .hword 0x1000 # length, one page
- .byte 0x00,0x00,0x00
- .byte 0x80 # variable response bit set
-.Lsccbr:
- .hword 0x00 # response code
-.Lscpincr1:
- .hword 0x00
-.Lscpa1:
- .byte 0x00
- .fill 89,1,0
-.Lscpa2:
- .int 0x00
-.Lscpincr2:
- .quad 0x00
- .fill 3984,1,0
- .org 0x12000
- .global _pend
-_pend:
-
-#ifdef CONFIG_SHARED_KERNEL
- .org 0x100000
+#ifdef CONFIG_64BIT
+#include "head64.S"
+#else
+#include "head31.S"
#endif
-
-#
-# startup-code, running in virtual mode
-#
- .globl _stext
-_stext: basr %r13,0 # get base
-.LPG2:
-#
-# Setup stack
-#
- l %r15,.Linittu-.LPG2(%r13)
- mvc __LC_CURRENT(4),__TI_task(%r15)
- ahi %r15,8192 # init_task_union + 8192
- st %r15,__LC_KERNEL_STACK # set end of kernel stack
- ahi %r15,-96
- xc 0(4,%r15),0(%r15) # set backchain to zero
-
-# check control registers
- stctl %c0,%c15,0(%r15)
- oi 2(%r15),0x20 # enable sigp external interrupts
- oi 0(%r15),0x10 # switch on low address protection
- lctl %c0,%c15,0(%r15)
-
-#
- lam 0,15,.Laregs-.LPG2(%r13) # load access regs needed by uaccess
- l %r14,.Lstart-.LPG2(%r13)
- basr %r14,%r14 # call start_kernel
-#
-# We returned from start_kernel ?!? PANIK
-#
- basr %r13,0
- lpsw .Ldw-.(%r13) # load disabled wait psw
-#
- .align 8
-.Ldw: .long 0x000a0000,0x00000000
-.Linittu: .long init_thread_union
-.Lstart: .long start_kernel
-.Laregs: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-
git://git.onelab.eu / linux-2.6.git / blobdiff