config RWSEM_XCHGADD_ALGORITHM
bool
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
source "init/Kconfig"
menu "System type"
bool "SolutionEngine"
help
Select SolutionEngine if configuring for a Hitachi SH7709
- or SH7750 evalutation board.
+ or SH7750 evaluation board.
config SH_7751_SOLUTION_ENGINE
bool "SolutionEngine7751"
help
Select 7751 SolutionEngine if configuring for a Hitachi SH7751
- evalutation board.
+ evaluation board.
+
+config SH_7300_SOLUTION_ENGINE
+ bool "SolutionEngine7300"
+ help
+ Select 7300 SolutionEngine if configuring for a Hitachi SH7300(SH-Mobile V)
+ evaluation board.
+
+config SH_73180_SOLUTION_ENGINE
+ bool "SolutionEngine73180"
+ help
+ Select 73180 SolutionEngine if configuring for a Hitachi SH73180(SH-Mobile 3)
+ evaluation board.
config SH_7751_SYSTEMH
bool "SystemH7751R"
config SH_MPC1211
bool "MPC1211"
+config SH_SH03
+ bool "SH03"
+ help
+ CTP/PCI-SH03 is a CPU module computer that produced
+ by Interface Corporation.
+ It is compact and excellent in durability.
+ It will play an active part in your factory or laboratory
+ as a FA computer.
+ More information at <http://www.interface.co.jp>
+
config SH_SECUREEDGE5410
bool "SecureEdge5410"
help
This includes both the OEM SecureEdge products as well as the
SME product line.
+config SH_HS7751RVOIP
+ bool "HS7751RVOIP"
+ help
+ Select HS7751RVOIP if configuring for a Renesas Technology
+ Sales VoIP board.
+
+config SH_RTS7751R2D
+ bool "RTS7751R2D"
+ help
+ Select RTS7751R2D if configuring for a Renesas Technology
+ Sales SH-Graphics board.
+
+config SH_EDOSK7705
+ bool "EDOSK7705"
+
+config SH_SH4202_MICRODEV
+ bool "SH4-202 MicroDev"
+ help
+ Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
+ with an SH4-202 CPU.
+
config SH_UNKNOWN
bool "BareCPU"
help
choice
prompt "Processor subtype"
-
+
config CPU_SUBTYPE_SH7604
bool "SH7604"
depends on CPU_SH2
config CPU_SUBTYPE_SH7300
bool "SH7300"
depends on CPU_SH3
-
+
+config CPU_SUBTYPE_SH7705
+ bool "SH7705"
+ depends on CPU_SH3
+
config CPU_SUBTYPE_SH7707
bool "SH7707"
depends on CPU_SH3
bool "SH7760"
depends on CPU_SH4
+config CPU_SUBTYPE_SH73180
+ bool "SH73180"
+ depends on CPU_SH4
+
config CPU_SUBTYPE_ST40STB1
- bool "ST40STB1"
+ bool "ST40STB1 / ST40RA"
+ depends on CPU_SH4
+ help
+ Select ST40STB1 if you have a ST40RA CPU.
+ This was previously called the ST40STB1, hence the option name.
+
+config CPU_SUBTYPE_ST40GX1
+ bool "ST40GX1"
+ depends on CPU_SH4
+ help
+ Select ST40GX1 if you have a ST40GX1 CPU.
+
+config CPU_SUBTYPE_SH4_202
+ bool "SH4-202"
depends on CPU_SH4
- help
- Select ST40STB1 if you have a ST40STB1 CPU.
endchoice
+config SH7705_CACHE_32KB
+ bool "Enable 32KB cache size for SH7705"
+ depends on CPU_SUBTYPE_SH7705
+ default y
+
config MMU
bool "Support for memory management hardware"
depends on !CPU_SH2
# Platform-specific memory start and size definitions
config MEMORY_START
hex "Physical memory start address" if !MEMORY_SET || MEMORY_OVERRIDE
- default "0x08000000" if !MEMORY_SET || MEMORY_OVERRIDE || !MEMORY_OVERRIDE && SH_ADX || SH_MPC1211 || SH_SECUREEDGE5410
- default "0x0c000000" if !MEMORY_OVERRIDE && (SH_DREAMCAST || SH_HP600 || SH_BIGSUR || SH_SH2000 || SH_7751_SOLUTION_ENGINE || SH_SOLUTION_ENGINE)
+ default "0x08000000" if !MEMORY_SET || MEMORY_OVERRIDE || !MEMORY_OVERRIDE && SH_ADX || SH_MPC1211 || SH_SH03 || SH_SECUREEDGE5410 || SH_SH4202_MICRODEV
+ default "0x0c000000" if !MEMORY_OVERRIDE && (SH_DREAMCAST || SH_HP600 || SH_BIGSUR || SH_SH2000 || SH_73180_SOLUTION_ENGINE || SH_7300_SOLUTION_ENGINE || SH_7751_SOLUTION_ENGINE || SH_SOLUTION_ENGINE || SH_HS7751RVOIP || SH_RTS7751R2D || SH_EDOSK7705)
---help---
Computers built with Hitachi SuperH processors always
map the ROM starting at address zero. But the processor
- does not specify the range that RAM takes.
+ does not specify the range that RAM takes.
The physical memory (RAM) start address will be automatically
set to 08000000, unless you selected one of the following
config MEMORY_SIZE
hex "Physical memory size" if !MEMORY_SET || MEMORY_OVERRIDE
default "0x00400000" if !MEMORY_SET || MEMORY_OVERRIDE || !MEMORY_OVERRIDE && SH_ADX || !MEMORY_OVERRIDE && (SH_HP600 || SH_BIGSUR || SH_SH2000)
- default "0x01000000" if !MEMORY_OVERRIDE && SH_DREAMCAST || SH_SECUREEDGE5410
- default "0x04000000" if !MEMORY_OVERRIDE && SH_7751_SOLUTION_ENGINE
- default "0x02000000" if !MEMORY_OVERRIDE && SH_SOLUTION_ENGINE
- default "0x08000000" if SH_MPC1211
+ default "0x01000000" if !MEMORY_OVERRIDE && SH_DREAMCAST || SH_SECUREEDGE5410 || SH_EDOSK7705
+ default "0x02000000" if !MEMORY_OVERRIDE && (SH_73180_SOLUTION_ENGINE || SH_SOLUTION_ENGINE)
+ default "0x04000000" if !MEMORY_OVERRIDE && (SH_7300_SOLUTION_ENGINE || SH_7751_SOLUTION_ENGINE || SH_HS7751RVOIP || SH_RTS7751R2D || SH_SH4202_MICRODEV)
+ default "0x08000000" if SH_MPC1211 || SH_SH03
help
This sets the default memory size assumed by your SH kernel. It can
be overridden as normal by the 'mem=' argument on the kernel command
config MEMORY_SET
bool
- depends on !MEMORY_OVERRIDE && (SH_MPC1211 || SH_ADX || SH_DREAMCAST || SH_HP600 || SH_BIGSUR || SH_SH2000 || SH_7751_SOLUTION_ENGINE || SH_SOLUTION_ENGINE || SH_SECUREEDGE5410)
+ depends on !MEMORY_OVERRIDE && (SH_MPC1211 || SH_SH03 || SH_ADX || SH_DREAMCAST || SH_HP600 || SH_BIGSUR || SH_SH2000 || SH_7751_SOLUTION_ENGINE || SH_SOLUTION_ENGINE || SH_SECUREEDGE5410 || SH_HS7751RVOIP || SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_EDOSK7705)
default y
help
This is an option about which you will never be asked a question.
# If none of the above have set memory start/size, ask the user.
config MEMORY_OVERRIDE
bool "Override default load address and memory size"
-
+
# XXX: break these out into the board-specific configs below
config CF_ENABLER
bool "Compact Flash Enabler support"
- depends on SH_ADX || SH_SOLUTION_ENGINE || SH_UNKNOWN || SH_CAT68701
+ depends on SH_ADX || SH_SOLUTION_ENGINE || SH_UNKNOWN || SH_CAT68701 || SH_SH03
---help---
Compact Flash is a small, removable mass storage device introduced
in 1994 originally as a PCMCIA device. If you say `Y' here, you
# The SH7750 RTC module is disabled in the Dreamcast
config SH_RTC
bool
- depends on !SH_DREAMCAST && !SH_SATURN
+ depends on !SH_DREAMCAST && !SH_SATURN && !SH_7300_SOLUTION_ENGINE && !SH_73180_SOLUTION_ENGINE
default y
help
Selecting this option will allow the Linux kernel to emulate
If unsure, say N.
+config SH_FPU
+ bool "FPU support"
+ depends on !CPU_SH3
+ default y
+ help
+ Selecting this option will enable support for SH processors that
+ have FPU units (ie, SH77xx).
+
+ This option must be set in order to enable the FPU.
+
config SH_DSP
bool "DSP support"
depends on !CPU_SH4
This option must be set in order to enable the DSP.
+config SH_ADC
+ bool "ADC support"
+ depends on CPU_SH3
+ default y
+ help
+ Selecting this option will allow the Linux kernel to use SH3 on-chip
+ ADC module.
+
+ If unsure, say N.
+
config SH_HP600
bool
depends on SH_HP620 || SH_HP680 || SH_HP690
default y
+config CPU_SUBTYPE_ST40
+ bool
+ depends on CPU_SUBTYPE_ST40STB1 || CPU_SUBTYPE_ST40GX1
+ default y
+
config DISCONTIGMEM
bool
depends on SH_HP690
config ZERO_PAGE_OFFSET
hex "Zero page offset"
- default "0x00001000" if !SH_MPC1211
- default "0x00004000" if SH_MPC1211
+ default "0x00001000" if !(SH_MPC1211 || SH_SH03)
+ default "0x00004000" if SH_MPC1211 || SH_SH03
help
This sets the default offset of zero page.
help
Selecting this option will enable an in-kernel API for manipulating
the store queues integrated in the SH-4 processors.
-
+
config SMP
bool "Symmetric multi-processing support"
---help---
This is purely to save memory - each supported CPU adds
approximately eight kilobytes to the kernel image.
+config HS7751RVOIP_CODEC
+ bool "Support VoIP Codec section"
+ depends on SH_HS7751RVOIP
+ help
+ Selecting this option will support CODEC section.
+
+config RTS7751R2D_REV11
+ bool "RTS7751R2D Rev. 1.1 board support"
+ depends on SH_RTS7751R2D
+ help
+ Selecting this option will support version rev. 1.1.
+
+config SH_PCLK_CALC
+ bool
+ default n if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH73180
+ default y
+ help
+ This option will cause the PCLK value to be probed at run-time. It
+ will display a notification if the probed value has greater than a
+ 1% variance of the hardcoded CONFIG_SH_PCLK_FREQ.
+
config SH_PCLK_FREQ
int "Peripheral clock frequency (in Hz)"
- default "49876504" if CPU_SUBTYPE_SH7750
- default "60013568" if CPU_SUBTYPE_SH7751
+ default "50000000" if CPU_SUBTYPE_SH7750
+ default "60000000" if CPU_SUBTYPE_SH7751
+ default "33333333" if CPU_SUBTYPE_SH7300
+ default "27000000" if CPU_SUBTYPE_SH73180
+ default "66000000" if CPU_SUBTYPE_SH4_202
default "1193182"
help
This option is used to specify the peripheral clock frequency. This
menu "CPU Frequency scaling"
-config CPU_FREQ
- bool "CPU Frequency scaling"
- help
- CPU clock scaling allows you to change the clock speed of the
- running CPU on the fly.
-
- For details, take a look at <file:Documentation/cpu-freq>.
-
- If unsure, say N.
-
source "drivers/cpufreq/Kconfig"
config CPU_FREQ_TABLE
config HEARTBEAT
bool "Heartbeat LED"
- depends on SH_MPC1211 || SH_CAT68701 || SH_STB1_HARP || SH_STB1_OVERDRIVE || SH_BIGSUR || SH_7751_SOLUTION_ENGINE || SH_SOLUTION_ENGINE
+ depends on SH_MPC1211 || SH_SH03 || SH_CAT68701 || SH_STB1_HARP || SH_STB1_OVERDRIVE || SH_BIGSUR || SH_7751_SOLUTION_ENGINE || SH_7300_SOLUTION_ENGINE || SH_73180_SOLUTION_ENGINE || SH_SOLUTION_ENGINE || SH_RTS7751R2D || SH_SH4202_MICRODEV
help
Use the power-on LED on your machine as a load meter. The exact
behavior is platform-dependent, but normally the flash frequency is
a hyperbolic function of the 5-minute load average.
+config RTC_9701JE
+ tristate "EPSON RTC-9701JE support"
+ depends on SH_RTS7751R2D
+ help
+ Selecting this option will support EPSON RTC-9701JE.
+
endmenu
# PCMCIA outright. -- PFM.
config ISA
bool
- default y if PCMCIA
+ default y if PCMCIA || SMC91X
help
Find out whether you have ISA slots on your motherboard. ISA is the
name of a bus system, i.e. the way the CPU talks to the other stuff
endmenu
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
+menu "SH initrd options"
+ depends on BLK_DEV_INITRD
-source "arch/sh/oprofile/Kconfig"
-
-menu "Kernel hacking"
-
-config MAGIC_SYSRQ
- bool "Magic SysRq key"
- help
- If you say Y here, you will have some control over the system even
- if the system crashes for example during kernel debugging (e.g., you
- will be able to flush the buffer cache to disk, reboot the system
- immediately or dump some status information). This is accomplished
- by pressing various keys while holding SysRq (Alt+PrintScreen). It
- also works on a serial console (on PC hardware at least), if you
- send a BREAK and then within 5 seconds a command keypress. The
- keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
- unless you really know what this hack does.
-
-config DEBUG_SPINLOCK
- bool "Spinlock debugging"
- help
- Say Y here and build SMP to catch missing spinlock initialization
- and certain other kinds of spinlock errors commonly made. This is
- best used in conjunction with the NMI watchdog so that spinlock
- deadlocks are also debuggable.
-
-config SH_STANDARD_BIOS
- bool "Use LinuxSH standard BIOS"
- help
- Say Y here if your target has the gdb-sh-stub
- package from www.m17n.org (or any conforming standard LinuxSH BIOS)
- in FLASH or EPROM. The kernel will use standard BIOS calls during
- boot for various housekeeping tasks (including calls to read and
- write characters to a system console, get a MAC address from an
- on-board Ethernet interface, and shut down the hardware). Note this
- does not work with machines with an existing operating system in
- mask ROM and no flash (WindowsCE machines fall in this category).
- If unsure, say N.
+config EMBEDDED_RAMDISK
+ bool "Embed root filesystem ramdisk into the kernel"
-config SH_EARLY_PRINTK
- bool "Early printk support"
- depends on SH_STANDARD_BIOS
+config EMBEDDED_RAMDISK_IMAGE
+ string "Filename of gziped ramdisk image"
+ depends on EMBEDDED_RAMDISK
+ default "ramdisk.gz"
help
- Say Y here to redirect kernel printk messages to the serial port
- used by the SH-IPL bootloader, starting very early in the boot
- process and ending when the kernel's serial console is initialised.
- This option is only useful porting the kernel to a new machine,
- when the kernel may crash or hang before the serial console is
- initialised. If unsure, say N.
-
-config KGDB
- bool "Include KGDB kernel debugger"
- help
- Include in-kernel hooks for kgdb, the Linux kernel source level
- debugger. See <http://kgdb.sourceforge.net/> for more information.
- Unless you are intending to debug the kernel, say N here.
-
-menu "KGDB configuration options"
- depends on KGDB
-
-config MORE_COMPILE_OPTIONS
- bool "Add any additional compile options"
- help
- If you want to add additional CFLAGS to the kernel build, enable this
- option and then enter what you would like to add in the next question.
- Note however that -g is already appended with the selection of KGDB.
-
-config COMPILE_OPTIONS
- string "Additional compile arguments"
- depends on MORE_COMPILE_OPTIONS
-
-config KGDB_NMI
- bool "Enter KGDB on NMI"
- default n
-
-config KGDB_THREAD
- bool "Include KGDB thread support"
- default y
-
-config SH_KGDB_CONSOLE
- bool "Console messages through GDB"
- default n
-
-config KGDB_SYSRQ
- bool "Allow SysRq 'G' to enter KGDB"
- default y
-
-config KGDB_KERNEL_ASSERTS
- bool "Include KGDB kernel assertions"
- default n
-
-comment "Serial port setup"
-
-config KGDB_DEFPORT
- int "Port number (ttySCn)"
- default "1"
-
-config KGDB_DEFBAUD
- int "Baud rate"
- default "115200"
-
-choice
- prompt "Parity"
- depends on KGDB
- default KGDB_DEFPARITY_N
-
-config KGDB_DEFPARITY_N
- bool "None"
-
-config KGDB_DEFPARITY_E
- bool "Even"
-
-config KGDB_DEFPARITY_O
- bool "Odd"
-
-endchoice
+ This is the filename of the ramdisk image to be built into the
+ kernel. Relative pathnames are relative to arch/sh/ramdisk/.
+ The ramdisk image is not part of the kernel distribution; you must
+ provide one yourself.
-choice
- prompt "Data bits"
- depends on KGDB
- default KGDB_DEFBITS_8
-
-config KGDB_DEFBITS_8
- bool "8"
+endmenu
-config KGDB_DEFBITS_7
- bool "7"
+source "drivers/Kconfig"
-endchoice
+source "fs/Kconfig"
-endmenu
+source "arch/sh/oprofile/Kconfig"
-config FRAME_POINTER
- bool "Compile the kernel with frame pointers"
- default y if KGDB
- help
- If you say Y here the resulting kernel image will be slightly larger
- and slower, but it will give very useful debugging information.
- If you don't debug the kernel, you can say N, but we may not be able
- to solve problems without frame pointers.
+source "arch/sh/Kconfig.debug"
-endmenu
+source "kernel/vserver/Kconfig"
source "security/Kconfig"
source "crypto/Kconfig"
source "lib/Kconfig"
-
git://git.onelab.eu / linux-2.6.git / blobdiff