--- /dev/null
+/*
+ * linux/arch/sh/kernel/pci-hs7751rvoip.c
+ *
+ * Author: Ian DaSilva (idasilva@mvista.com)
+ *
+ * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * PCI initialization for the Renesas SH7751R HS7751RVoIP board
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+
+#include <asm/io.h>
+#include "../../../drivers/pci/pci-sh7751.h"
+#include <asm/hs7751rvoip/hs7751rvoip.h>
+
+#define PCIMCR_MRSET_OFF 0xBFFFFFFF
+#define PCIMCR_RFSH_OFF 0xFFFFFFFB
+
+/*
+ * Only long word accesses of the PCIC's internal local registers and the
+ * configuration registers from the CPU is supported.
+ */
+#define PCIC_WRITE(x,v) writel((v), PCI_REG(x))
+#define PCIC_READ(x) readl(PCI_REG(x))
+
+/*
+ * Description: This function sets up and initializes the pcic, sets
+ * up the BARS, maps the DRAM into the address space etc, etc.
+ */
+int __init pcibios_init_platform(void)
+{
+ unsigned long bcr1, wcr1, wcr2, wcr3, mcr;
+ unsigned short bcr2, bcr3;
+
+ /*
+ * Initialize the slave bus controller on the pcic. The values used
+ * here should not be hardcoded, but they should be taken from the bsc
+ * on the processor, to make this function as generic as possible.
+ * (i.e. Another sbc may usr different SDRAM timing settings -- in order
+ * for the pcic to work, its settings need to be exactly the same.)
+ */
+ bcr1 = (*(volatile unsigned long *)(SH7751_BCR1));
+ bcr2 = (*(volatile unsigned short *)(SH7751_BCR2));
+ bcr3 = (*(volatile unsigned short *)(SH7751_BCR3));
+ wcr1 = (*(volatile unsigned long *)(SH7751_WCR1));
+ wcr2 = (*(volatile unsigned long *)(SH7751_WCR2));
+ wcr3 = (*(volatile unsigned long *)(SH7751_WCR3));
+ mcr = (*(volatile unsigned long *)(SH7751_MCR));
+
+ bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */
+ (*(volatile unsigned long *)(SH7751_BCR1)) = bcr1;
+
+ bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
+ PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */
+ PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */
+ PCIC_WRITE(SH7751_PCIBCR3, bcr3); /* PCIC BCR3 */
+ PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */
+ PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */
+ PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */
+ mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
+ PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */
+
+ /* Enable all interrupts, so we know what to fix */
+ PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff);
+ PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f);
+
+ /* Set up standard PCI config registers */
+ PCIC_WRITE(SH7751_PCICONF1, 0xFB900047); /* Bus Master, Mem & I/O access */
+ PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */
+ PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */
+ PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */
+ PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */
+ PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */
+ PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */
+ PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */
+ PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */
+ PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */
+
+ /* Now turn it on... */
+ PCIC_WRITE(SH7751_PCICR, 0xa5000001);
+
+ /*
+ * Set PCIMBR and PCIIOBR here, assuming a single window
+ * (16M MEM, 256K IO) is enough. If a larger space is
+ * needed, the readx/writex and inx/outx functions will
+ * have to do more (e.g. setting registers for each call).
+ */
+
+ /*
+ * Set the MBR so PCI address is one-to-one with window,
+ * meaning all calls go straight through... use ifdef to
+ * catch erroneous assumption.
+ */
+ BUG_ON(PCIBIOS_MIN_MEM != SH7751_PCI_MEMORY_BASE);
+
+ PCIC_WRITE(SH7751_PCIMBR, PCIBIOS_MIN_MEM);
+
+ /* Set IOBR for window containing area specified in pci.h */
+ PCIC_WRITE(SH7751_PCIIOBR, (PCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK));
+
+ /* All done, may as well say so... */
+ printk("SH7751R PCI: Finished initialization of the PCI controller\n");
+
+ return 1;
+}
+
+int __init pcibios_map_platform_irq(u8 slot, u8 pin)
+{
+ switch (slot) {
+ case 0: return IRQ_PCISLOT; /* PCI Extend slot */
+ case 1: return IRQ_PCMCIA; /* PCI Cardbus Bridge */
+ case 2: return IRQ_PCIETH; /* Realtek Ethernet controller */
+ case 3: return IRQ_PCIHUB; /* Realtek Ethernet Hub controller */
+ default:
+ printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
+ return -1;
+ }
+}
+
+static struct resource sh7751_io_resource = {
+ .name = "SH7751_IO",
+ .start = 0x4000,
+ .end = 0x4000 + SH7751_PCI_IO_SIZE - 1,
+ .flags = IORESOURCE_IO
+};
+
+static struct resource sh7751_mem_resource = {
+ .name = "SH7751_mem",
+ .start = SH7751_PCI_MEMORY_BASE,
+ .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM
+};
+
+extern struct pci_ops sh7751_pci_ops;
+
+struct pci_channel board_pci_channels[] = {
+ { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
+ { NULL, NULL, NULL, 0, 0 },
+};
+EXPORT_SYMBOL(board_pci_channels);
git://git.onelab.eu / linux-2.6.git / blobdiff