* Copyright (C) 2004 David S. Miller <davem@davemloft.net>
*/
-#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/kprobes.h>
#include <linux/module.h>
int __kprobes arch_prepare_kprobe(struct kprobe *p)
{
p->ainsn.insn[0] = *p->addr;
+ flushi(&p->ainsn.insn[0]);
+
p->ainsn.insn[1] = BREAKPOINT_INSTRUCTION_2;
+ flushi(&p->ainsn.insn[1]);
+
p->opcode = *p->addr;
return 0;
}
/* If INSN is a relative control transfer instruction,
* return the corrected branch destination value.
*
- * The original INSN location was REAL_PC, it actually
- * executed at PC and produced destination address NPC.
+ * regs->tpc and regs->tnpc still hold the values of the
+ * program counters at the time of trap due to the execution
+ * of the BREAKPOINT_INSTRUCTION_2 at p->ainsn.insn[1]
+ *
*/
-static unsigned long __kprobes relbranch_fixup(u32 insn, unsigned long real_pc,
- unsigned long pc,
- unsigned long npc)
+static unsigned long __kprobes relbranch_fixup(u32 insn, struct kprobe *p,
+ struct pt_regs *regs)
{
+ unsigned long real_pc = (unsigned long) p->addr;
+
/* Branch not taken, no mods necessary. */
- if (npc == pc + 0x4UL)
- return real_pc + 0x4UL;
+ if (regs->tnpc == regs->tpc + 0x4UL)
+ return real_pc + 0x8UL;
/* The three cases are call, branch w/prediction,
* and traditional branch.
if ((insn & 0xc0000000) == 0x40000000 ||
(insn & 0xc1c00000) == 0x00400000 ||
(insn & 0xc1c00000) == 0x00800000) {
+ unsigned long ainsn_addr;
+
+ ainsn_addr = (unsigned long) &p->ainsn.insn[0];
+
/* The instruction did all the work for us
* already, just apply the offset to the correct
* instruction location.
*/
- return (real_pc + (npc - pc));
+ return (real_pc + (regs->tnpc - ainsn_addr));
}
- return real_pc + 0x4UL;
+ /* It is jmpl or some other absolute PC modification instruction,
+ * leave NPC as-is.
+ */
+ return regs->tnpc;
}
/* If INSN is an instruction which writes it's PC location
{
unsigned long *slot = NULL;
- /* Simplest cast is call, which always uses %o7 */
+ /* Simplest case is 'call', which always uses %o7 */
if ((insn & 0xc0000000) == 0x40000000) {
slot = ®s->u_regs[UREG_I7];
}
- /* Jmpl encodes the register inside of the opcode */
+ /* 'jmpl' encodes the register inside of the opcode */
if ((insn & 0xc1f80000) == 0x81c00000) {
unsigned long rd = ((insn >> 25) & 0x1f);
/*
* Called after single-stepping. p->addr is the address of the
- * instruction whose first byte has been replaced by the breakpoint
+ * instruction which has been replaced by the breakpoint
* instruction. To avoid the SMP problems that can occur when we
* temporarily put back the original opcode to single-step, we
* single-stepped a copy of the instruction. The address of this
- * copy is p->ainsn.insn.
+ * copy is &p->ainsn.insn[0].
*
* This function prepares to return from the post-single-step
* breakpoint trap.
{
u32 insn = p->ainsn.insn[0];
+ regs->tnpc = relbranch_fixup(insn, p, regs);
+
+ /* This assignment must occur after relbranch_fixup() */
regs->tpc = kcb->kprobe_orig_tnpc;
- regs->tnpc = relbranch_fixup(insn,
- (unsigned long) p->addr,
- (unsigned long) &p->ainsn.insn[0],
- regs->tnpc);
+
retpc_fixup(regs, insn, (unsigned long) p->addr);
regs->tstate = ((regs->tstate & ~TSTATE_PIL) |
struct jprobe *jp = container_of(p, struct jprobe, kp);
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
- kcb->jprobe_saved_regs_location = regs;
memcpy(&(kcb->jprobe_saved_regs), regs, sizeof(*regs));
- /* Save a whole stack frame, this gets arguments
- * pushed onto the stack after using up all the
- * arg registers.
- */
- memcpy(&(kcb->jprobe_saved_stack),
- (char *) (regs->u_regs[UREG_FP] + STACK_BIAS),
- sizeof(kcb->jprobe_saved_stack));
-
regs->tpc = (unsigned long) jp->entry;
regs->tnpc = ((unsigned long) jp->entry) + 0x4UL;
regs->tstate |= TSTATE_PIL;
void __kprobes jprobe_return(void)
{
- __asm__ __volatile__(
- ".globl jprobe_return_trap_instruction\n"
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+ register unsigned long orig_fp asm("g1");
+
+ orig_fp = kcb->jprobe_saved_regs.u_regs[UREG_FP];
+ __asm__ __volatile__("\n"
+"1: cmp %%sp, %0\n\t"
+ "blu,a,pt %%xcc, 1b\n\t"
+ " restore\n\t"
+ ".globl jprobe_return_trap_instruction\n"
"jprobe_return_trap_instruction:\n\t"
- "ta 0x70");
+ "ta 0x70"
+ : /* no outputs */
+ : "r" (orig_fp));
}
extern void jprobe_return_trap_instruction(void);
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
if (addr == (u32 *) jprobe_return_trap_instruction) {
- if (kcb->jprobe_saved_regs_location != regs) {
- printk("JPROBE: Current regs (%p) does not match "
- "saved regs (%p).\n",
- regs, kcb->jprobe_saved_regs_location);
- printk("JPROBE: Saved registers\n");
- __show_regs(kcb->jprobe_saved_regs_location);
- printk("JPROBE: Current registers\n");
- __show_regs(regs);
- BUG();
- }
- /* Restore old register state. Do pt_regs
- * first so that UREG_FP is the original one for
- * the stack frame restore.
- */
memcpy(regs, &(kcb->jprobe_saved_regs), sizeof(*regs));
-
- memcpy((char *) (regs->u_regs[UREG_FP] + STACK_BIAS),
- &(kcb->jprobe_saved_stack),
- sizeof(kcb->jprobe_saved_stack));
-
preempt_enable_no_resched();
return 1;
}
git://git.onelab.eu / linux-2.6.git / blobdiff