* Copyright (C) 2004 David S. Miller <davem@davemloft.net>
*/
-#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/kprobes.h>
+#include <linux/module.h>
#include <asm/kdebug.h>
#include <asm/signal.h>
#include <asm/cacheflush.h>
+#include <asm/uaccess.h>
/* We do not have hardware single-stepping on sparc64.
* So we implement software single-stepping with breakpoint
int __kprobes arch_prepare_kprobe(struct kprobe *p)
{
p->ainsn.insn[0] = *p->addr;
+ flushi(&p->ainsn.insn[0]);
+
p->ainsn.insn[1] = BREAKPOINT_INSTRUCTION_2;
+ flushi(&p->ainsn.insn[1]);
+
p->opcode = *p->addr;
return 0;
}
flushi(p->addr);
}
-static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb)
+static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
{
kcb->prev_kprobe.kp = kprobe_running();
kcb->prev_kprobe.status = kcb->kprobe_status;
kcb->prev_kprobe.orig_tstate_pil = kcb->kprobe_orig_tstate_pil;
}
-static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb)
+static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
{
__get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
kcb->kprobe_status = kcb->prev_kprobe.status;
kcb->kprobe_orig_tstate_pil = kcb->prev_kprobe.orig_tstate_pil;
}
-static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
+static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
struct kprobe_ctlblk *kcb)
{
__get_cpu_var(current_kprobe) = p;
kcb->kprobe_orig_tstate_pil = (regs->tstate & TSTATE_PIL);
}
-static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs,
+static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs,
struct kprobe_ctlblk *kcb)
{
regs->tstate |= TSTATE_PIL;
/* If INSN is a relative control transfer instruction,
* return the corrected branch destination value.
*
- * The original INSN location was REAL_PC, it actually
- * executed at PC and produced destination address NPC.
+ * regs->tpc and regs->tnpc still hold the values of the
+ * program counters at the time of trap due to the execution
+ * of the BREAKPOINT_INSTRUCTION_2 at p->ainsn.insn[1]
+ *
*/
-static unsigned long __kprobes relbranch_fixup(u32 insn, unsigned long real_pc,
- unsigned long pc,
- unsigned long npc)
+static unsigned long __kprobes relbranch_fixup(u32 insn, struct kprobe *p,
+ struct pt_regs *regs)
{
+ unsigned long real_pc = (unsigned long) p->addr;
+
/* Branch not taken, no mods necessary. */
- if (npc == pc + 0x4UL)
- return real_pc + 0x4UL;
+ if (regs->tnpc == regs->tpc + 0x4UL)
+ return real_pc + 0x8UL;
/* The three cases are call, branch w/prediction,
* and traditional branch.
if ((insn & 0xc0000000) == 0x40000000 ||
(insn & 0xc1c00000) == 0x00400000 ||
(insn & 0xc1c00000) == 0x00800000) {
+ unsigned long ainsn_addr;
+
+ ainsn_addr = (unsigned long) &p->ainsn.insn[0];
+
/* The instruction did all the work for us
* already, just apply the offset to the correct
* instruction location.
*/
- return (real_pc + (npc - pc));
+ return (real_pc + (regs->tnpc - ainsn_addr));
}
- return real_pc + 0x4UL;
+ /* It is jmpl or some other absolute PC modification instruction,
+ * leave NPC as-is.
+ */
+ return regs->tnpc;
}
/* If INSN is an instruction which writes it's PC location
{
unsigned long *slot = NULL;
- /* Simplest cast is call, which always uses %o7 */
+ /* Simplest case is 'call', which always uses %o7 */
if ((insn & 0xc0000000) == 0x40000000) {
slot = ®s->u_regs[UREG_I7];
}
- /* Jmpl encodes the register inside of the opcode */
+ /* 'jmpl' encodes the register inside of the opcode */
if ((insn & 0xc1f80000) == 0x81c00000) {
unsigned long rd = ((insn >> 25) & 0x1f);
/*
* Called after single-stepping. p->addr is the address of the
- * instruction whose first byte has been replaced by the breakpoint
+ * instruction which has been replaced by the breakpoint
* instruction. To avoid the SMP problems that can occur when we
* temporarily put back the original opcode to single-step, we
* single-stepped a copy of the instruction. The address of this
- * copy is p->ainsn.insn.
+ * copy is &p->ainsn.insn[0].
*
* This function prepares to return from the post-single-step
* breakpoint trap.
{
u32 insn = p->ainsn.insn[0];
+ regs->tnpc = relbranch_fixup(insn, p, regs);
+
+ /* This assignment must occur after relbranch_fixup() */
regs->tpc = kcb->kprobe_orig_tnpc;
- regs->tnpc = relbranch_fixup(insn,
- (unsigned long) p->addr,
- (unsigned long) &p->ainsn.insn[0],
- regs->tnpc);
+
retpc_fixup(regs, insn, (unsigned long) p->addr);
regs->tstate = ((regs->tstate & ~TSTATE_PIL) |
kcb->kprobe_orig_tstate_pil);
}
-static inline int post_kprobe_handler(struct pt_regs *regs)
+static int __kprobes post_kprobe_handler(struct pt_regs *regs)
{
struct kprobe *cur = kprobe_running();
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
return 1;
}
-static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+static int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
{
struct kprobe *cur = kprobe_running();
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+ const struct exception_table_entry *entry;
+
+ switch(kcb->kprobe_status) {
+ case KPROBE_HIT_SS:
+ case KPROBE_REENTER:
+ /*
+ * We are here because the instruction being single
+ * stepped caused a page fault. We reset the current
+ * kprobe and the tpc points back to the probe address
+ * and allow the page fault handler to continue as a
+ * normal page fault.
+ */
+ regs->tpc = (unsigned long)cur->addr;
+ regs->tnpc = kcb->kprobe_orig_tnpc;
+ regs->tstate = ((regs->tstate & ~TSTATE_PIL) |
+ kcb->kprobe_orig_tstate_pil);
+ if (kcb->kprobe_status == KPROBE_REENTER)
+ restore_previous_kprobe(kcb);
+ else
+ reset_current_kprobe();
+ preempt_enable_no_resched();
+ break;
+ case KPROBE_HIT_ACTIVE:
+ case KPROBE_HIT_SSDONE:
+ /*
+ * We increment the nmissed count for accounting,
+ * we can also use npre/npostfault count for accouting
+ * these specific fault cases.
+ */
+ kprobes_inc_nmissed_count(cur);
+
+ /*
+ * We come here because instructions in the pre/post
+ * handler caused the page_fault, this could happen
+ * if handler tries to access user space by
+ * copy_from_user(), get_user() etc. Let the
+ * user-specified handler try to fix it first.
+ */
+ if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr))
+ return 1;
- if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr))
- return 1;
+ /*
+ * In case the user-specified fault handler returned
+ * zero, try to fix up.
+ */
- if (kcb->kprobe_status & KPROBE_HIT_SS) {
- resume_execution(cur, regs, kcb);
+ entry = search_exception_tables(regs->tpc);
+ if (entry) {
+ regs->tpc = entry->fixup;
+ regs->tnpc = regs->tpc + 4;
+ return 1;
+ }
- reset_current_kprobe();
- preempt_enable_no_resched();
+ /*
+ * fixup_exception() could not handle it,
+ * Let do_page_fault() fix it.
+ */
+ break;
+ default:
+ break;
}
+
return 0;
}
struct die_args *args = (struct die_args *)data;
int ret = NOTIFY_DONE;
+ if (args->regs && user_mode(args->regs))
+ return ret;
+
switch (val) {
case DIE_DEBUG:
if (kprobe_handler(args->regs))
struct jprobe *jp = container_of(p, struct jprobe, kp);
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
- kcb->jprobe_saved_regs_location = regs;
memcpy(&(kcb->jprobe_saved_regs), regs, sizeof(*regs));
- /* Save a whole stack frame, this gets arguments
- * pushed onto the stack after using up all the
- * arg registers.
- */
- memcpy(&(kcb->jprobe_saved_stack),
- (char *) (regs->u_regs[UREG_FP] + STACK_BIAS),
- sizeof(kcb->jprobe_saved_stack));
-
regs->tpc = (unsigned long) jp->entry;
regs->tnpc = ((unsigned long) jp->entry) + 0x4UL;
regs->tstate |= TSTATE_PIL;
void __kprobes jprobe_return(void)
{
- __asm__ __volatile__(
- ".globl jprobe_return_trap_instruction\n"
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+ register unsigned long orig_fp asm("g1");
+
+ orig_fp = kcb->jprobe_saved_regs.u_regs[UREG_FP];
+ __asm__ __volatile__("\n"
+"1: cmp %%sp, %0\n\t"
+ "blu,a,pt %%xcc, 1b\n\t"
+ " restore\n\t"
+ ".globl jprobe_return_trap_instruction\n"
"jprobe_return_trap_instruction:\n\t"
- "ta 0x70");
+ "ta 0x70"
+ : /* no outputs */
+ : "r" (orig_fp));
}
extern void jprobe_return_trap_instruction(void);
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
if (addr == (u32 *) jprobe_return_trap_instruction) {
- if (kcb->jprobe_saved_regs_location != regs) {
- printk("JPROBE: Current regs (%p) does not match "
- "saved regs (%p).\n",
- regs, kcb->jprobe_saved_regs_location);
- printk("JPROBE: Saved registers\n");
- __show_regs(kcb->jprobe_saved_regs_location);
- printk("JPROBE: Current registers\n");
- __show_regs(regs);
- BUG();
- }
- /* Restore old register state. Do pt_regs
- * first so that UREG_FP is the original one for
- * the stack frame restore.
- */
memcpy(regs, &(kcb->jprobe_saved_regs), sizeof(*regs));
-
- memcpy((char *) (regs->u_regs[UREG_FP] + STACK_BIAS),
- &(kcb->jprobe_saved_stack),
- sizeof(kcb->jprobe_saved_stack));
-
preempt_enable_no_resched();
return 1;
}