+config DEFCONFIG_LIST
+ string
+ option defconfig_list
+ default "arch/$ARCH/defconfig"
+
# UML uses the generic IRQ sugsystem
config GENERIC_HARDIRQS
bool
default y
-config USERMODE
+config UML
bool
default y
-# XXX: does UM have a mmu/swap?
config MMU
bool
default y
config PCI
bool
-config UID16
+config PCMCIA
+ bool
+
+# Yet to do!
+config TRACE_IRQFLAGS_SUPPORT
+ bool
+ default n
+
+config LOCKDEP_SUPPORT
+ bool
+ default y
+
+config STACKTRACE_SUPPORT
+ bool
+ default y
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
+config GENERIC_BUG
bool
default y
+ depends on BUG
-config RWSEM_GENERIC_SPINLOCK
+# Used in kernel/irq/manage.c and include/linux/irq.h
+config IRQ_RELEASE_METHOD
bool
default y
menu "UML-specific options"
config MODE_TT
- bool "Tracing thread support"
- default y
+ bool "Tracing thread support (DEPRECATED)"
+ default n
+ depends on BROKEN
help
This option controls whether tracing thread support is compiled
- into UML. Normally, this should be set to Y. If you intend to
- use only skas mode (and the host has the skas patch applied to it),
- then it is OK to say N here.
+ into UML. This option is largely obsolete, given that skas0 provides
+ skas security and performance without needing to patch the host.
+ It is safe to say 'N' here; saying 'Y' may cause additional problems
+ with the resulting binary even if you run UML in SKAS mode, and running
+ in TT mode is strongly *NOT RECOMMENDED*.
config STATIC_LINK
bool "Force a static link"
for use in a chroot jail. So, if you intend to run UML inside a
chroot, and you disable CONFIG_MODE_TT, you probably want to say Y
here.
+ Additionally, this option enables using higher memory spaces (up to
+ 2.75G) for UML - disabling CONFIG_MODE_TT and enabling this option leads
+ to best results for this.
+
+config KERNEL_HALF_GIGS
+ int "Kernel address space size (in .5G units)"
+ default "1"
+ depends on MODE_TT
+ help
+ This determines the amount of address space that UML will allocate for
+ its own, measured in half Gigabyte units. The default is 1.
+ Change this only if you need to boot UML with an unusually large amount
+ of physical memory.
config MODE_SKAS
- bool "Separate Kernel Address Space support"
+ bool "Separate Kernel Address Space support" if MODE_TT
default y
help
This option controls whether skas (separate kernel address space)
- support is compiled in. If you have applied the skas patch to the
- host, then you certainly want to say Y here (and consider saying N
- to CONFIG_MODE_TT). Otherwise, it is safe to say Y. Disabling this
- option will shrink the UML binary slightly.
+ support is compiled in.
+ Unless you have specific needs to use TT mode (which applies almost only
+ to developers), you should say Y here.
+ SKAS mode will make use of the SKAS3 patch if it is applied on the host
+ (and your UML will run in SKAS3 mode), but if no SKAS patch is applied
+ on the host it will run in SKAS0 mode, which is anyway faster than TT
+ mode.
+
+source "arch/um/Kconfig.arch"
+source "mm/Kconfig"
+
+config LD_SCRIPT_STATIC
+ bool
+ default y
+ depends on MODE_TT || STATIC_LINK
+
+config LD_SCRIPT_DYN
+ bool
+ default y
+ depends on !LD_SCRIPT_STATIC
config NET
bool "Networking support"
should consider updating your networking tools too because changes
in the kernel and the tools often go hand in hand. The tools are
contained in the package net-tools, the location and version number
- of which are given in Documentation/Changes.
+ of which are given in <file:Documentation/Changes>.
For a general introduction to Linux networking, it is highly
recommended to read the NET-HOWTO, available from
source "fs/Kconfig.binfmt"
-config EXTERNFS
- tristate "Support for host-based filesystems"
-
config HOSTFS
tristate "Host filesystem"
help
If you'd like to be able to work with files stored on the host,
say Y or M here; otherwise say N.
-config HUMFS
- tristate 'Usable host filesystem'
- depends on EXTERNFS
-
config HPPFS
tristate "HoneyPot ProcFS (EXPERIMENTAL)"
- depends on BROKEN
+ depends on EXPERIMENTAL
help
- hppfs (HoneyPot ProcFS) is a filesystem which allows UML /proc
+ hppfs (HoneyPot ProcFS) is a filesystem which allows UML /proc
entries to be overridden, removed, or fabricated from the host.
Its purpose is to allow a UML to appear to be a physical machine
by removing or changing anything in /proc which gives away the
identity of a UML.
- See http://user-mode-linux.sf.net/hppfs.html for more information.
+ See <http://user-mode-linux.sf.net/hppfs.html> for more information.
You only need this if you are setting up a UML honeypot. Otherwise,
it is safe to say 'N' here.
- If you are actively using it, please ask for it to be fixed. In this
- moment, it does not work on 2.6 (it works somehow on 2.4).
-
config MCONSOLE
bool "Management console"
default y
It is safe to say 'Y' here.
-config HOST_2G_2G
- bool "2G/2G host address space split"
- default n
- help
- This is needed when the host on which you run has a 2G/2G memory
- split, instead of the customary 3G/1G.
+config MAGIC_SYSRQ
+ bool "Magic SysRq key"
+ depends on MCONSOLE
+ ---help---
+ If you say Y here, you will have some control over the system even
+ if the system crashes for example during kernel debugging (e.g., you
+ will be able to flush the buffer cache to disk, reboot the system
+ immediately or dump some status information). A key for each of the
+ possible requests is provided.
+
+ This is the feature normally accomplished by pressing a key
+ while holding SysRq (Alt+PrintScreen).
- Note that to enable such a host
- configuration, which makes sense only in some cases, you need special
- host patches.
+ On UML, this is accomplished by sending a "sysrq" command with
+ mconsole, followed by the letter for the requested command.
- So, if you do not know what to do here, say 'N'.
+ The keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
+ unless you really know what this hack does.
config SMP
bool "Symmetric multi-processing support (EXPERIMENTAL)"
default n
- depends on MODE_TT && EXPERIMENTAL
+ #SMP_BROKEN is for x86_64.
+ depends on MODE_TT && EXPERIMENTAL && (!SMP_BROKEN || (BROKEN && SMP_BROKEN))
help
This option enables UML SMP support.
It is NOT related to having a real SMP box. Not directly, at least.
set to the host's CONFIG_NEST_LEVEL + CONFIG_KERNEL_HALF_GIGS.
Only change this if you are running nested UMLs.
-config KERNEL_HALF_GIGS
- int "Kernel address space size (in .5G units)"
- default "1"
- help
- This determines the amount of address space that UML will allocate for
- its own, measured in half Gigabyte units. The default is 1.
- Change this only if you need to boot UML with an unusually large amount
- of physical memory.
-
config HIGHMEM
- bool "Highmem support"
- depends on BROKEN
+ bool "Highmem support (EXPERIMENTAL)"
+ depends on !64BIT && EXPERIMENTAL
+ default n
+ help
+ This was used to allow UML to run with big amounts of memory.
+ Currently it is unstable, so if unsure say N.
-config PROC_MM
- bool "/proc/mm support"
+ To use big amounts of memory, it is recommended to disable TT mode (i.e.
+ CONFIG_MODE_TT) and enable static linking (i.e. CONFIG_STATIC_LINK) -
+ this should allow the guest to use up to 2.75G of memory.
config KERNEL_STACK_ORDER
int "Kernel stack size order"
UML and spend long times with UML stopped at a breakpoint. In this
case, when UML is restarted, it will call the timer enough times to make
up for the time spent at the breakpoint. This could result in a
- noticable lag. If this is a problem, then disable this option.
+ noticeable lag. If this is a problem, then disable this option.
endmenu
+source "kernel/Kconfig.hz"
+
source "init/Kconfig"
-source "drivers/base/Kconfig"
+source "drivers/block/Kconfig"
-source "arch/um/Kconfig_char"
+source "arch/um/Kconfig.char"
-source "arch/um/Kconfig_block"
+source "drivers/base/Kconfig"
-config NETDEVICES
- bool
- default NET
+source "net/Kconfig"
-source "arch/um/Kconfig_net"
+source "arch/um/Kconfig.net"
-source "net/Kconfig"
+source "drivers/net/Kconfig"
+
+source "drivers/connector/Kconfig"
source "fs/Kconfig"
depends on SCSI
default y
-source "arch/um/Kconfig_scsi"
+source "arch/um/Kconfig.scsi"
endmenu
source "drivers/mtd/Kconfig"
endif
+#This is just to shut up some Kconfig warnings, so no prompt.
config INPUT
bool
default n