#include <sched.h>
#include <string.h>
#include <sys/mman.h>
-#include <sys/ptrace.h>
#include <sys/time.h>
#include <sys/wait.h>
#include "user.h"
#include "sigcontext.h"
#include "sysdep/sigcontext.h"
#include "os.h"
-#include "signal_user.h"
#include "user_util.h"
#include "mem_user.h"
#include "process.h"
#include "kern_util.h"
-#include "frame.h"
#include "chan_user.h"
#include "ptrace_user.h"
+#include "irq_user.h"
#include "mode.h"
#include "tt.h"
int is_tracer_winch(int pid, int fd, void *data)
{
- if(pid != tracing_pid)
+ if(pid != os_getpgrp())
return(0);
register_winch_irq(tracer_winch[0], fd, -1, data);
(ptrace(PTRACE_CONT, pid, 0, 0) < 0))
tracer_panic("OP_FORK failed to attach pid");
wait_for_stop(pid, SIGSTOP, PTRACE_CONT, NULL);
+ if (ptrace(PTRACE_OLDSETOPTIONS, pid, 0, (void *)PTRACE_O_TRACESYSGOOD) < 0)
+ tracer_panic("OP_FORK: PTRACE_SETOPTIONS failed, errno = %d", errno);
if(ptrace(PTRACE_CONT, pid, 0, 0) < 0)
tracer_panic("OP_FORK failed to continue process");
}
va_start(ap, format);
vprintf(format, ap);
+ va_end(ap);
printf("\n");
while(1) pause();
}
static void tracer_segv(int sig, struct sigcontext sc)
{
+ struct faultinfo fi;
+ GET_FAULTINFO_FROM_SC(fi, &sc);
printf("Tracing thread segfault at address 0x%lx, ip 0x%lx\n",
- SC_FAULT_ADDR(&sc), SC_IP(&sc));
+ FAULT_ADDRESS(fi), SC_IP(&sc));
while(1)
pause();
}
signal(SIGSEGV, (__sighandler_t) sig_handler);
set_cmdline("(idle thread)");
set_init_pid(os_getpid());
+ init_irq_signals(0);
proc = arg;
return((*proc)(NULL));
}
* any more, the trace of those will land here. So, we need to just
* PTRACE_SYSCALL it.
*/
- case SIGTRAP:
+ case (SIGTRAP + 0x80):
if(ptrace(PTRACE_SYSCALL, pid, 0, 0) < 0)
tracer_panic("sleeping_process_signal : Failed to "
"PTRACE_SYSCALL pid %d, errno = %d\n",
int tracer(int (*init_proc)(void *), void *sp)
{
void *task = NULL;
- unsigned long eip = 0;
int status, pid = 0, sig = 0, cont_type, tracing = 0, op = 0;
- int last_index, proc_id = 0, n, err, old_tracing = 0, strace = 0;
+ int proc_id = 0, n, err, old_tracing = 0, strace = 0;
+ int local_using_sysemu = 0;
- capture_signal_stack();
signal(SIGPIPE, SIG_IGN);
setup_tracer_winch();
tracing_pid = os_getpid();
printf("waitpid on idle thread failed, errno = %d\n", errno);
exit(1);
}
+ if (ptrace(PTRACE_OLDSETOPTIONS, pid, 0, (void *)PTRACE_O_TRACESYSGOOD) < 0) {
+ printf("Failed to PTRACE_SETOPTIONS for idle thread, errno = %d\n", errno);
+ exit(1);
+ }
if((ptrace(PTRACE_CONT, pid, 0, 0) < 0)){
printf("Failed to continue idle thread, errno = %d\n", errno);
exit(1);
else if(WIFSTOPPED(status)){
proc_id = pid_to_processor_id(pid);
sig = WSTOPSIG(status);
- if(signal_index[proc_id] == 1024){
- signal_index[proc_id] = 0;
- last_index = 1023;
- }
- else last_index = signal_index[proc_id] - 1;
- if(((sig == SIGPROF) || (sig == SIGVTALRM) ||
- (sig == SIGALRM)) &&
- (signal_record[proc_id][last_index].signal == sig)&&
- (signal_record[proc_id][last_index].pid == pid))
- signal_index[proc_id] = last_index;
- signal_record[proc_id][signal_index[proc_id]].pid = pid;
- gettimeofday(&signal_record[proc_id][signal_index[proc_id]].time, NULL);
- eip = ptrace(PTRACE_PEEKUSER, pid, PT_IP_OFFSET, 0);
- signal_record[proc_id][signal_index[proc_id]].addr = eip;
- signal_record[proc_id][signal_index[proc_id]++].signal = sig;
-
if(proc_id == -1){
sleeping_process_signal(pid, sig);
continue;
tracing = is_tracing(task);
old_tracing = tracing;
+ /* Assume: no syscall, when coming from user */
+ if ( tracing )
+ do_sigtrap(task);
+
switch(sig){
case SIGUSR1:
sig = 0;
op = do_proc_op(task, proc_id);
switch(op){
+ /*
+ * This is called when entering user mode; after
+ * this, we start intercepting syscalls.
+ *
+ * In fact, a process is started in kernel mode,
+ * so with is_tracing() == 0 (and that is reset
+ * when executing syscalls, since UML kernel has
+ * the right to do syscalls);
+ */
case OP_TRACE_ON:
arch_leave_kernel(task, pid);
tracing = 1;
case OP_HALT:
unmap_physmem();
kmalloc_ok = 0;
- ptrace(PTRACE_KILL, pid, 0, 0);
+ os_kill_ptraced_process(pid, 0);
+ /* Now let's reap remaining zombies */
+ errno = 0;
+ do {
+ waitpid(-1, &status,
+ WUNTRACED);
+ } while (errno != ECHILD);
return(op == OP_REBOOT);
case OP_NONE:
printf("Detaching pid %d\n", pid);
*/
pid = cpu_tasks[proc_id].pid;
break;
+ case (SIGTRAP + 0x80):
+ if(!tracing && (debugger_pid != -1)){
+ child_signal(pid, status & 0x7fff);
+ continue;
+ }
+ tracing = 0;
+ /* local_using_sysemu has been already set
+ * below, since if we are here, is_tracing() on
+ * the traced task was 1, i.e. the process had
+ * already run through one iteration of the
+ * loop which executed a OP_TRACE_ON request.*/
+ do_syscall(task, pid, local_using_sysemu);
+ sig = SIGUSR2;
+ break;
case SIGTRAP:
if(!tracing && (debugger_pid != -1)){
child_signal(pid, status);
continue;
}
tracing = 0;
- if(do_syscall(task, pid))
- sig = SIGUSR2;
- else clear_singlestep(task);
break;
case SIGPROF:
if(tracing) sig = 0;
case SIGBUS:
case SIGILL:
case SIGWINCH:
+
default:
tracing = 0;
break;
continue;
}
- if(tracing){
- if(singlestepping_tt(task))
- cont_type = PTRACE_SINGLESTEP;
- else cont_type = PTRACE_SYSCALL;
- }
- else cont_type = PTRACE_CONT;
+ local_using_sysemu = get_using_sysemu();
- if((cont_type == PTRACE_CONT) &&
- (debugger_pid != -1) && strace)
+ if(tracing)
+ cont_type = SELECT_PTRACE_OPERATION(local_using_sysemu,
+ singlestepping(task));
+ else if((debugger_pid != -1) && strace)
cont_type = PTRACE_SYSCALL;
+ else
+ cont_type = PTRACE_CONT;
if(ptrace(cont_type, pid, 0, sig) != 0){
tracer_panic("ptrace failed to continue "
" the debug switch.\n\n"
);
-static int __init uml_honeypot_setup(char *line, int *add)
-{
- jail_setup("", add);
- honeypot = 1;
- return 0;
-}
-__uml_setup("honeypot", uml_honeypot_setup,
-"honeypot\n"
-" This makes UML put process stacks in the same location as they are\n"
-" on the host, allowing expoits such as stack smashes to work against\n"
-" UML. This implies 'jail'.\n\n"
-);
-
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
* Emacs will notice this stuff at the end of the file and automatically
git://git.onelab.eu / linux-2.6.git / blobdiff