bool
default y
+config ZONE_DMA32
+ bool
+ default y
+
+config LOCKDEP_SUPPORT
+ bool
+ default y
+
+config STACKTRACE_SUPPORT
+ bool
+ depends on !X86_64_XEN
+ default y
+
+config SEMAPHORE_SLEEPERS
+ bool
+ default y
+
config MMU
bool
default y
config RWSEM_XCHGADD_ALGORITHM
bool
+config GENERIC_HWEIGHT
+ bool
+ default y
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
config X86_CMPXCHG
bool
default y
config EARLY_PRINTK
bool
default y
- help
- Write kernel log output directly into the VGA buffer or to a serial
- port.
- This is useful for kernel debugging when your machine crashes very
- early before the console code is initialized. For normal operation
- it is not recommended because it looks ugly and doesn't cooperate
- with klogd/syslogd or the X server. You should normally N here,
- unless you want to debug such a crash.
+config GENERIC_ISA_DMA
+ bool
+ default y
-config HPET_TIMER
+config GENERIC_IOMAP
bool
default y
- help
- Use the IA-PC HPET (High Precision Event Timer) to manage
- time in preference to the PIT and RTC, if a HPET is
- present. The HPET provides a stable time base on SMP
- systems, unlike the RTC, but it is more expensive to access,
- as it is off-chip. You can find the HPET spec at
- <http://www.intel.com/labs/platcomp/hpet/hpetspec.htm>.
- If unsure, say Y.
+config ARCH_MAY_HAVE_PC_FDC
+ bool
+ default y
-config HPET_EMULATE_RTC
- def_bool HPET_TIMER && RTC=y
+config ARCH_POPULATES_NODE_MAP
+ def_bool y
-config GENERIC_ISA_DMA
+config DMI
bool
default y
-config GENERIC_IOMAP
+config AUDIT_ARCH
+ bool
+ default y
+
+config GENERIC_BUG
bool
default y
+ depends on BUG
+
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
source "init/Kconfig"
menu "Processor type and features"
+choice
+ prompt "Subarchitecture Type"
+ default X86_PC
+
+config X86_PC
+ bool "PC-compatible"
+ help
+ Choose this option if your computer is a standard PC or compatible.
+
+config X86_VSMP
+ bool "Support for ScaleMP vSMP"
+ depends on PCI
+ help
+ Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is
+ supposed to run on these EM64T-based machines. Only choose this option
+ if you have one of these machines.
+
+endchoice
+
choice
prompt "Processor family"
- default MK8
+ default GENERIC_CPU
config MK8
bool "AMD-Opteron/Athlon64"
Optimize for AMD Opteron/Athlon64/Hammer/K8 CPUs.
config MPSC
- bool "Intel x86-64"
+ bool "Intel P4 / older Netburst based Xeon"
help
- Optimize for Intel IA32 with 64bit extension CPUs
- (Prescott/Nocona/Potomac)
+ Optimize for Intel Pentium 4 and older Nocona/Dempsey Xeon CPUs
+ with Intel Extended Memory 64 Technology(EM64T). For details see
+ <http://www.intel.com/technology/64bitextensions/>.
+ Note the the latest Xeons (Xeon 51xx and 53xx) are not based on the
+ Netburst core and shouldn't use this option. You can distingush them
+ using the cpu family field
+ in /proc/cpuinfo. Family 15 is a older Xeon, Family 6 a newer one
+ (this rule only applies to system that support EM64T)
+
+config MCORE2
+ bool "Intel Core2 / newer Xeon"
+ help
+ Optimize for Intel Core2 and newer Xeons (51xx)
+ You can distingush the newer Xeons from the older ones using
+ the cpu family field in /proc/cpuinfo. 15 is a older Xeon
+ (use CONFIG_MPSC then), 6 is a newer one. This rule only
+ applies to CPUs that support EM64T.
config GENERIC_CPU
bool "Generic-x86-64"
help
Generic x86-64 CPU.
+ Run equally well on all x86-64 CPUs.
endchoice
+config X86_64_XEN
+ bool "Enable Xen compatible kernel"
+ select SWIOTLB
+ help
+ This option will compile a kernel compatible with Xen hypervisor
+
+config X86_NO_TSS
+ bool
+ depends on X86_64_XEN
+ default y
+
+config X86_NO_IDT
+ bool
+ depends on X86_64_XEN
+ default y
+
#
# Define implied options from the CPU selection here
#
config X86_L1_CACHE_BYTES
int
default "128" if GENERIC_CPU || MPSC
- default "64" if MK8
+ default "64" if MK8 || MCORE2
config X86_L1_CACHE_SHIFT
int
default "7" if GENERIC_CPU || MPSC
- default "6" if MK8
+ default "6" if MK8 || MCORE2
+
+config X86_INTERNODE_CACHE_BYTES
+ int
+ default "4096" if X86_VSMP
+ default X86_L1_CACHE_BYTES if !X86_VSMP
config X86_TSC
bool
+ depends on !X86_64_XEN
default y
config X86_GOOD_APIC
config MICROCODE
tristate "/dev/cpu/microcode - Intel CPU microcode support"
+ select FW_LOADER
---help---
If you say Y here the 'File systems' section, you will be
able to update the microcode on Intel processors. You will
If you use modprobe or kmod you may also want to add the line
'alias char-major-10-184 microcode' to your /etc/modules.conf file.
+config MICROCODE_OLD_INTERFACE
+ bool
+ depends on MICROCODE
+ default y
+
config X86_MSR
tristate "/dev/cpu/*/msr - Model-specific register support"
help
with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
/dev/cpu/31/cpuid.
-# disable it for opteron optimized builds because it pulls in ACPI_BOOT
config X86_HT
bool
- depends on SMP && !MK8
+ depends on SMP && !MK8 && !X86_64_XEN
default y
config MATH_EMULATION
config X86_IO_APIC
bool
+ depends !XEN_UNPRIVILEGED_GUEST
default y
+config X86_XEN_GENAPIC
+ bool
+ depends X86_64_XEN
+ default XEN_PRIVILEGED_GUEST || SMP
+
config X86_LOCAL_APIC
bool
+ depends !XEN_UNPRIVILEGED_GUEST
default y
config MTRR
bool "MTRR (Memory Type Range Register) support"
+ depends on !XEN_UNPRIVILEGED_GUEST
---help---
On Intel P6 family processors (Pentium Pro, Pentium II and later)
the Memory Type Range Registers (MTRRs) may be used to control
If you don't know what to do here, say N.
-config PREEMPT
- bool "Preemptible Kernel"
- ---help---
- This option reduces the latency of the kernel when reacting to
- real-time or interactive events by allowing a low priority process to
- be preempted even if it is in kernel mode executing a system call.
- This allows applications to run more reliably even when the system is
- under load. On contrary it may also break your drivers and add
- priority inheritance problems to your system. Don't select it if
- you rely on a stable system or have slightly obscure hardware.
- It's also not very well tested on x86-64 currently.
- You have been warned.
-
- Say Y here if you are feeling brave and building a kernel for a
- desktop, embedded or real-time system. Say N if you are unsure.
-
config SCHED_SMT
bool "SMT (Hyperthreading) scheduler support"
- depends on SMP
- default off
+ depends on SMP && !X86_64_XEN
+ default n
help
SMT scheduler support improves the CPU scheduler's decision making
when dealing with Intel Pentium 4 chips with HyperThreading at a
cost of slightly increased overhead in some places. If unsure say
N here.
+config SCHED_MC
+ bool "Multi-core scheduler support"
+ depends on SMP && !X86_64_XEN
+ default y
+ help
+ Multi-core scheduler support improves the CPU scheduler's decision
+ making when dealing with multi-core CPU chips at a cost of slightly
+ increased overhead in some places. If unsure say N here.
+
+source "kernel/Kconfig.preempt"
+
+config NUMA
+ bool "Non Uniform Memory Access (NUMA) Support"
+ depends on SMP && !X86_64_XEN
+ help
+ Enable NUMA (Non Uniform Memory Access) support. The kernel
+ will try to allocate memory used by a CPU on the local memory
+ controller of the CPU and add some more NUMA awareness to the kernel.
+ This code is recommended on all multiprocessor Opteron systems.
+ If the system is EM64T, you should say N unless your system is EM64T
+ NUMA.
+
config K8_NUMA
- bool "K8 NUMA support"
- depends on SMP
+ bool "Old style AMD Opteron NUMA detection"
+ depends on NUMA && PCI
+ default y
help
- Enable NUMA (Non Unified Memory Architecture) support for
- AMD Opteron Multiprocessor systems. The kernel will try to allocate
- memory used by a CPU on the local memory controller of the CPU
- and add some more NUMA awareness to the kernel.
- This code is recommended on all multiprocessor Opteron systems
- and normally doesn't hurt on others.
-
-config DISCONTIGMEM
- bool
- depends on K8_NUMA
+ Enable K8 NUMA node topology detection. You should say Y here if
+ you have a multi processor AMD K8 system. This uses an old
+ method to read the NUMA configuration directly from the builtin
+ Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA
+ instead, which also takes priority if both are compiled in.
+
+config NODES_SHIFT
+ int
+ default "6"
+ depends on NEED_MULTIPLE_NODES
+
+# Dummy CONFIG option to select ACPI_NUMA from drivers/acpi/Kconfig.
+
+config X86_64_ACPI_NUMA
+ bool "ACPI NUMA detection"
+ depends on NUMA
+ select ACPI
+ select PCI
+ select ACPI_NUMA
default y
+ help
+ Enable ACPI SRAT based node topology detection.
-config NUMA
+config NUMA_EMU
+ bool "NUMA emulation"
+ depends on NUMA
+ help
+ Enable NUMA emulation. A flat machine will be split
+ into virtual nodes when booted with "numa=fake=N", where N is the
+ number of nodes. This is only useful for debugging.
+
+config ARCH_DISCONTIGMEM_ENABLE
bool
- depends on K8_NUMA
+ depends on NUMA
default y
-config HAVE_DEC_LOCK
- bool
- depends on SMP
- default y
+config ARCH_DISCONTIGMEM_DEFAULT
+ def_bool y
+ depends on NUMA
+
+config ARCH_SPARSEMEM_ENABLE
+ def_bool y
+ depends on (NUMA || EXPERIMENTAL) && !X86_64_XEN
+
+config ARCH_MEMORY_PROBE
+ def_bool y
+ depends on MEMORY_HOTPLUG
+
+config ARCH_FLATMEM_ENABLE
+ def_bool y
+ depends on !NUMA
+
+source "mm/Kconfig"
+
+config MEMORY_HOTPLUG_RESERVE
+ def_bool y
+ depends on (MEMORY_HOTPLUG && DISCONTIGMEM)
+
+config HAVE_ARCH_EARLY_PFN_TO_NID
+ def_bool y
+ depends on NUMA
+
+config OUT_OF_LINE_PFN_TO_PAGE
+ def_bool y
+ depends on DISCONTIGMEM
-# actually 64 maximum, but you need to fix the APIC code first
-# to use clustered mode or whatever your big iron needs
config NR_CPUS
- int "Maximum number of CPUs (2-8)"
- range 2 8
+ int "Maximum number of CPUs (2-256)"
+ range 2 255
depends on SMP
+ default "16" if X86_64_XEN
default "8"
help
This allows you to specify the maximum number of CPUs which this
- kernel will support. The maximum supported value is 32 and the
- minimum value which makes sense is 2.
+ kernel will support. Current maximum is 256 CPUs due to
+ APIC addressing limits. Less depending on the hardware.
This is purely to save memory - each supported CPU requires
memory in the static kernel configuration.
-config GART_IOMMU
- bool "IOMMU support"
+config HOTPLUG_CPU
+ bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
+ depends on SMP && HOTPLUG && EXPERIMENTAL
help
- Support the K8 IOMMU. Needed to run systems with more than 4GB of memory
- properly with 32-bit PCI devices that do not support DAC (Double Address
- Cycle). The IOMMU can be turned off at runtime with the iommu=off parameter.
- Normally the kernel will take the right choice by itself.
- If unsure, say Y.
+ Say Y here to experiment with turning CPUs off and on. CPUs
+ can be controlled through /sys/devices/system/cpu/cpu#.
+ Say N if you want to disable CPU hotplug.
-# need this always enabled with GART_IOMMU for the VIA workaround
-config SWIOTLB
- bool
- depends on GART_IOMMU
- default y
+config ARCH_ENABLE_MEMORY_HOTPLUG
+ def_bool y
-config DUMMY_IOMMU
+config HPET_TIMER
bool
- depends on !GART_IOMMU && !SWIOTLB
+ depends on !X86_64_XEN
+ default y
+ help
+ Use the IA-PC HPET (High Precision Event Timer) to manage
+ time in preference to the PIT and RTC, if a HPET is
+ present. The HPET provides a stable time base on SMP
+ systems, unlike the TSC, but it is more expensive to access,
+ as it is off-chip. You can find the HPET spec at
+ <http://www.intel.com/hardwaredesign/hpetspec.htm>.
+
+config HPET_EMULATE_RTC
+ bool "Provide RTC interrupt"
+ depends on HPET_TIMER && RTC=y
+
+# Mark as embedded because too many people got it wrong.
+# The code disables itself when not needed.
+config IOMMU
+ bool "IOMMU support" if EMBEDDED
+ default y
+ select SWIOTLB
+ select AGP
+ depends on PCI && !X86_64_XEN
+ help
+ Support for full DMA access of devices with 32bit memory access only
+ on systems with more than 3GB. This is usually needed for USB,
+ sound, many IDE/SATA chipsets and some other devices.
+ Provides a driver for the AMD Athlon64/Opteron/Turion/Sempron GART
+ based IOMMU and a software bounce buffer based IOMMU used on Intel
+ systems and as fallback.
+ The code is only active when needed (enough memory and limited
+ device) unless CONFIG_IOMMU_DEBUG or iommu=force is specified
+ too.
+
+config CALGARY_IOMMU
+ bool "IBM Calgary IOMMU support"
+ select SWIOTLB
+ depends on PCI && EXPERIMENTAL
+ help
+ Support for hardware IOMMUs in IBM's xSeries x366 and x460
+ systems. Needed to run systems with more than 3GB of memory
+ properly with 32-bit PCI devices that do not support DAC
+ (Double Address Cycle). Calgary also supports bus level
+ isolation, where all DMAs pass through the IOMMU. This
+ prevents them from going anywhere except their intended
+ destination. This catches hard-to-find kernel bugs and
+ mis-behaving drivers and devices that do not use the DMA-API
+ properly to set up their DMA buffers. The IOMMU can be
+ turned off at boot time with the iommu=off parameter.
+ Normally the kernel will make the right choice by itself.
+ If unsure, say Y.
+
+config CALGARY_IOMMU_ENABLED_BY_DEFAULT
+ bool "Should Calgary be enabled by default?"
default y
+ depends on CALGARY_IOMMU
help
- Don't use IOMMU code. This will cause problems when you have more than 4GB
- of memory and any 32-bit devices. Don't turn on unless you know what you
- are doing.
+ Should Calgary be enabled by default? if you choose 'y', Calgary
+ will be used (if it exists). If you choose 'n', Calgary will not be
+ used even if it exists. If you choose 'n' and would like to use
+ Calgary anyway, pass 'iommu=calgary' on the kernel command line.
+ If unsure, say Y.
+
+# need this always selected by IOMMU for the VIA workaround
+config SWIOTLB
+ bool
config X86_MCE
bool "Machine check support" if EMBEDDED
+ depends on !X86_64_XEN
default y
help
Include a machine check error handler to report hardware errors.
machine check error logs. See
ftp://ftp.x86-64.org/pub/linux/tools/mcelog
+config X86_MCE_INTEL
+ bool "Intel MCE features"
+ depends on X86_MCE && X86_LOCAL_APIC
+ default y
+ help
+ Additional support for intel specific MCE features such as
+ the thermal monitor.
+
+config X86_MCE_AMD
+ bool "AMD MCE features"
+ depends on X86_MCE && X86_LOCAL_APIC
+ default y
+ help
+ Additional support for AMD specific MCE features such as
+ the DRAM Error Threshold.
+
+config KEXEC
+ bool "kexec system call"
+ depends on !X86_64_XEN
+ help
+ kexec is a system call that implements the ability to shutdown your
+ current kernel, and to start another kernel. It is like a reboot
+ but it is independent of the system firmware. And like a reboot
+ you can start any kernel with it, not just Linux.
+
+ The name comes from the similarity to the exec system call.
+
+ It is an ongoing process to be certain the hardware in a machine
+ is properly shutdown, so do not be surprised if this code does not
+ initially work for you. It may help to enable device hotplugging
+ support. As of this writing the exact hardware interface is
+ strongly in flux, so no good recommendation can be made.
+
+config CRASH_DUMP
+ bool "kernel crash dumps (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ help
+ Generate crash dump after being started by kexec.
+ This should be normally only set in special crash dump kernels
+ which are loaded in the main kernel with kexec-tools into
+ a specially reserved region and then later executed after
+ a crash by kdump/kexec. The crash dump kernel must be compiled
+ to a memory address not used by the main kernel or BIOS using
+ PHYSICAL_START.
+ For more details see Documentation/kdump/kdump.txt
+
+config PHYSICAL_START
+ hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
+ default "0x1000000" if CRASH_DUMP
+ default "0x200000"
+ help
+ This gives the physical address where the kernel is loaded. Normally
+ for regular kernels this value is 0x200000 (2MB). But in the case
+ of kexec on panic the fail safe kernel needs to run at a different
+ address than the panic-ed kernel. This option is used to set the load
+ address for kernels used to capture crash dump on being kexec'ed
+ after panic. The default value for crash dump kernels is
+ 0x1000000 (16MB). This can also be set based on the "X" value as
+ specified in the "crashkernel=YM@XM" command line boot parameter
+ passed to the panic-ed kernel. Typically this parameter is set as
+ crashkernel=64M@16M. Please take a look at
+ Documentation/kdump/kdump.txt for more details about crash dumps.
+
+ Don't change this unless you know what you are doing.
+
+config SECCOMP
+ bool "Enable seccomp to safely compute untrusted bytecode"
+ depends on PROC_FS
+ default y
+ help
+ This kernel feature is useful for number crunching applications
+ that may need to compute untrusted bytecode during their
+ execution. By using pipes or other transports made available to
+ the process as file descriptors supporting the read/write
+ syscalls, it's possible to isolate those applications in
+ their own address space using seccomp. Once seccomp is
+ enabled via /proc/<pid>/seccomp, it cannot be disabled
+ and the task is only allowed to execute a few safe syscalls
+ defined by each seccomp mode.
+
+ If unsure, say Y. Only embedded should say N here.
+
+config CC_STACKPROTECTOR
+ bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ help
+ This option turns on the -fstack-protector GCC feature. This
+ feature puts, at the beginning of critical functions, a canary
+ value on the stack just before the return address, and validates
+ the value just before actually returning. Stack based buffer
+ overflows (that need to overwrite this return address) now also
+ overwrite the canary, which gets detected and the attack is then
+ neutralized via a kernel panic.
+
+ This feature requires gcc version 4.2 or above, or a distribution
+ gcc with the feature backported. Older versions are automatically
+ detected and for those versions, this configuration option is ignored.
+
+config CC_STACKPROTECTOR_ALL
+ bool "Use stack-protector for all functions"
+ depends on CC_STACKPROTECTOR
+ help
+ Normally, GCC only inserts the canary value protection for
+ functions that use large-ish on-stack buffers. By enabling
+ this option, GCC will be asked to do this for ALL functions.
+
+source kernel/Kconfig.hz
+
+config REORDER
+ bool "Function reordering"
+ default n
+ help
+ This option enables the toolchain to reorder functions for a more
+ optimal TLB usage. If you have pretty much any version of binutils,
+ this can increase your kernel build time by roughly one minute.
+
+config K8_NB
+ def_bool y
+ depends on AGP_AMD64 || IOMMU || (PCI && NUMA)
+
endmenu
+#
+# Use the generic interrupt handling code in kernel/irq/:
+#
+config GENERIC_HARDIRQS
+ bool
+ default y
+
+config GENERIC_IRQ_PROBE
+ bool
+ default y
+
+# we have no ISA slots, but we do have ISA-style DMA.
+config ISA_DMA_API
+ bool
+ default y
+
+config GENERIC_PENDING_IRQ
+ bool
+ depends on GENERIC_HARDIRQS && SMP
+ default y
menu "Power management options"
+ depends on !XEN_UNPRIVILEGED_GUEST
+if !X86_64_XEN
source kernel/power/Kconfig
+endif
source "drivers/acpi/Kconfig"
config PCI_MMCONFIG
bool "Support mmconfig PCI config space access"
- depends on PCI
- select ACPI_BOOT
+ depends on PCI && ACPI
-config UNORDERED_IO
- bool "Unordered IO mapping access"
- depends on EXPERIMENTAL
- help
- Use unordered stores to access IO memory mappings in device drivers.
- Still very experimental. When a driver works on IA64/ppc64/pa-risc it should
- work with this option, but it makes the drivers behave differently
- from i386. Requires that the driver writer used memory barriers
- properly.
+config XEN_PCIDEV_FRONTEND
+ bool "Xen PCI Frontend"
+ depends on PCI && X86_64_XEN
+ default y
+ help
+ The PCI device frontend driver allows the kernel to import arbitrary
+ PCI devices from a PCI backend to support PCI driver domains.
+
+config XEN_PCIDEV_FE_DEBUG
+ bool "Xen PCI Frontend Debugging"
+ depends on XEN_PCIDEV_FRONTEND
+ default n
+ help
+ Enables some debug statements within the PCI Frontend.
+
+source "drivers/pci/pcie/Kconfig"
source "drivers/pci/Kconfig"
left.
config IA32_AOUT
- bool "IA32 a.out support"
+ tristate "IA32 a.out support"
depends on IA32_EMULATION
help
Support old a.out binaries in the 32bit emulation.
depends on COMPAT && SYSVIPC
default y
-config UID16
- bool
- depends on IA32_EMULATION
- default y
-
endmenu
+source "net/Kconfig"
+
source drivers/Kconfig
source "drivers/firmware/Kconfig"
source fs/Kconfig
+menu "Instrumentation Support"
+ depends on EXPERIMENTAL
+
source "arch/x86_64/oprofile/Kconfig"
+config KPROBES
+ bool "Kprobes (EXPERIMENTAL)"
+ depends on KALLSYMS && EXPERIMENTAL && MODULES
+ help
+ Kprobes allows you to trap at almost any kernel address and
+ execute a callback function. register_kprobe() establishes
+ a probepoint and specifies the callback. Kprobes is useful
+ for kernel debugging, non-intrusive instrumentation and testing.
+ If in doubt, say "N".
+endmenu
+
source "arch/x86_64/Kconfig.debug"
source "kernel/vserver/Kconfig"
source "crypto/Kconfig"
+source "drivers/xen/Kconfig"
+
source "lib/Kconfig"