#include <linux/linkage.h>
-#include <linux/config.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/sched.h>
BI(x,8) BI(x,9) BI(x,a) BI(x,b) \
BI(x,c) BI(x,d) BI(x,e) BI(x,f)
-#define BUILD_14_IRQS(x) \
- BI(x,0) BI(x,1) BI(x,2) BI(x,3) \
- BI(x,4) BI(x,5) BI(x,6) BI(x,7) \
- BI(x,8) BI(x,9) BI(x,a) BI(x,b) \
- BI(x,c) BI(x,d)
-
/*
* ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
* (these are usually mapped to vectors 0x20-0x2f)
*/
-BUILD_16_IRQS(0x0)
-#ifdef CONFIG_X86_LOCAL_APIC
/*
* The IO-APIC gives us many more interrupt sources. Most of these
* are unused but an SMP system is supposed to have enough memory ...
*
* (these are usually mapped into the 0x30-0xff vector range)
*/
- BUILD_16_IRQS(0x1) BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3)
+ BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3)
BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7)
BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb)
-BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd)
-
-#ifdef CONFIG_PCI_MSI
- BUILD_14_IRQS(0xe)
-#endif
-
-#endif
+BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf)
#undef BUILD_16_IRQS
-#undef BUILD_14_IRQS
#undef BI
IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \
IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f)
-#define IRQLIST_14(x) \
- IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \
- IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \
- IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \
- IRQ(x,c), IRQ(x,d)
-
-void (*interrupt[NR_IRQS])(void) = {
- IRQLIST_16(0x0),
-
-#ifdef CONFIG_X86_IO_APIC
- IRQLIST_16(0x1), IRQLIST_16(0x2), IRQLIST_16(0x3),
+/* for the irq vectors */
+static void (*interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = {
+ IRQLIST_16(0x2), IRQLIST_16(0x3),
IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7),
IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb),
- IRQLIST_16(0xc), IRQLIST_16(0xd)
-
-#ifdef CONFIG_PCI_MSI
- , IRQLIST_14(0xe)
-#endif
-
-#endif
+ IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf)
};
#undef IRQ
#undef IRQLIST_16
-#undef IRQLIST_14
/*
* This is the 'legacy' 8259A Programmable Interrupt Controller,
* moves to arch independent land
*/
+static int i8259A_auto_eoi;
DEFINE_SPINLOCK(i8259A_lock);
-
-static void end_8259A_irq (unsigned int irq)
-{
- if (irq > 256) {
- char var;
- printk("return %p stack %p ti %p\n", __builtin_return_address(0), &var, task_thread_info(current));
-
- BUG();
- }
-
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)) &&
- irq_desc[irq].action)
- enable_8259A_irq(irq);
-}
-
-#define shutdown_8259A_irq disable_8259A_irq
-
static void mask_and_ack_8259A(unsigned int);
-static unsigned int startup_8259A_irq(unsigned int irq)
-{
- enable_8259A_irq(irq);
- return 0; /* never anything pending */
-}
-
-static struct hw_interrupt_type i8259A_irq_type = {
- .typename = "XT-PIC",
- .startup = startup_8259A_irq,
- .shutdown = shutdown_8259A_irq,
- .enable = enable_8259A_irq,
- .disable = disable_8259A_irq,
- .ack = mask_and_ack_8259A,
- .end = end_8259A_irq,
+static struct irq_chip i8259A_chip = {
+ .name = "XT-PIC",
+ .mask = disable_8259A_irq,
+ .unmask = enable_8259A_irq,
+ .mask_ack = mask_and_ack_8259A,
};
/*
{
disable_irq_nosync(irq);
io_apic_irqs &= ~(1<<irq);
- irq_desc[irq].handler = &i8259A_irq_type;
+ set_irq_chip_and_handler_name(irq, &i8259A_chip, handle_level_irq,
+ "XT");
enable_irq(irq);
}
* Lightweight spurious IRQ detection. We do not want
* to overdo spurious IRQ handling - it's usually a sign
* of hardware problems, so we only do the checks we can
- * do without slowing down good hardware unnecesserily.
+ * do without slowing down good hardware unnecessarily.
*
* Note that IRQ7 and IRQ15 (the two spurious IRQs
* usually resulting from the 8259A-1|2 PICs) occur
{
unsigned long flags;
+ i8259A_auto_eoi = auto_eoi;
+
spin_lock_irqsave(&i8259A_lock, flags);
outb(0xff, 0x21); /* mask all of 8259A-1 */
* in AEOI mode we just have to mask the interrupt
* when acking.
*/
- i8259A_irq_type.ack = disable_8259A_irq;
+ i8259A_chip.mask_ack = disable_8259A_irq;
else
- i8259A_irq_type.ack = mask_and_ack_8259A;
+ i8259A_chip.mask_ack = mask_and_ack_8259A;
udelay(100); /* wait for 8259A to initialize */
static int i8259A_resume(struct sys_device *dev)
{
- init_8259A(0);
+ init_8259A(i8259A_auto_eoi);
restore_ELCR(irq_trigger);
return 0;
}
*/
static struct irqaction irq2 = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL};
+DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
+ [0 ... FIRST_EXTERNAL_VECTOR - 1] = -1,
+ [FIRST_EXTERNAL_VECTOR + 0] = 0,
+ [FIRST_EXTERNAL_VECTOR + 1] = 1,
+ [FIRST_EXTERNAL_VECTOR + 2] = 2,
+ [FIRST_EXTERNAL_VECTOR + 3] = 3,
+ [FIRST_EXTERNAL_VECTOR + 4] = 4,
+ [FIRST_EXTERNAL_VECTOR + 5] = 5,
+ [FIRST_EXTERNAL_VECTOR + 6] = 6,
+ [FIRST_EXTERNAL_VECTOR + 7] = 7,
+ [FIRST_EXTERNAL_VECTOR + 8] = 8,
+ [FIRST_EXTERNAL_VECTOR + 9] = 9,
+ [FIRST_EXTERNAL_VECTOR + 10] = 10,
+ [FIRST_EXTERNAL_VECTOR + 11] = 11,
+ [FIRST_EXTERNAL_VECTOR + 12] = 12,
+ [FIRST_EXTERNAL_VECTOR + 13] = 13,
+ [FIRST_EXTERNAL_VECTOR + 14] = 14,
+ [FIRST_EXTERNAL_VECTOR + 15] = 15,
+ [FIRST_EXTERNAL_VECTOR + 16 ... NR_VECTORS - 1] = -1
+};
void __init init_ISA_irqs (void)
{
int i;
-#ifdef CONFIG_X86_LOCAL_APIC
init_bsp_APIC();
-#endif
init_8259A(0);
for (i = 0; i < NR_IRQS; i++) {
/*
* 16 old-style INTA-cycle interrupts:
*/
- irq_desc[i].handler = &i8259A_irq_type;
+ set_irq_chip_and_handler_name(i, &i8259A_chip,
+ handle_level_irq, "XT");
} else {
/*
* 'high' PCI IRQs filled in on demand
*/
- irq_desc[i].handler = &no_irq_type;
+ irq_desc[i].chip = &no_irq_chip;
}
}
}
*/
for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
int vector = FIRST_EXTERNAL_VECTOR + i;
- if (i >= NR_IRQS)
- break;
if (vector != IA32_SYSCALL_VECTOR)
set_intr_gate(vector, interrupt[i]);
}
* IRQ0 must be given a fixed assignment and initialized,
* because it's used before the IO-APIC is set up.
*/
- set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]);
+ __get_cpu_var(vector_irq)[FIRST_DEVICE_VECTOR] = 0;
/*
* The reschedule interrupt is a CPU-to-CPU reschedule-helper
set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
-#ifdef CONFIG_X86_LOCAL_APIC
/* self generated IPI for local APIC timer */
set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
/* IPI vectors for APIC spurious and error interrupts */
set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
set_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
-#endif
/*
* Set the clock to HZ Hz, we already have a valid