#include <linux/init.h>
#include <linux/delay.h>
#include <linux/sched.h>
-#include <linux/config.h>
#include <linux/smp_lock.h>
+#include <linux/pci.h>
#include <linux/mc146818rtc.h>
#include <linux/acpi.h>
#include <linux/sysdev.h>
+#include <linux/msi.h>
+#include <linux/htirq.h>
#ifdef CONFIG_ACPI
#include <acpi/acpi_bus.h>
#endif
#include <asm/mach_apic.h>
#include <asm/acpi.h>
#include <asm/dma.h>
+#include <asm/nmi.h>
+#include <asm/msidef.h>
+#include <asm/hypertransport.h>
+
+static int assign_irq_vector(int irq, cpumask_t mask, cpumask_t *result);
#define __apicdebuginit __init
static int no_timer_check;
-int disable_timer_pin_1 __initdata;
+static int disable_timer_pin_1 __initdata;
-int timer_over_8254 __initdata = 0;
+int timer_over_8254 __initdata = 1;
/* Where if anywhere is the i8259 connect in external int mode */
static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
static DEFINE_SPINLOCK(ioapic_lock);
+DEFINE_SPINLOCK(vector_lock);
/*
* # of IRQ routing registers
short apic, pin, next;
} irq_2_pin[PIN_MAP_SIZE];
-int vector_irq[NR_VECTORS] __read_mostly = { [0 ... NR_VECTORS - 1] = -1};
-#ifdef CONFIG_PCI_MSI
-#define vector_to_irq(vector) \
- (platform_legacy_irq(vector) ? vector : vector_irq[vector])
-#else
-#define vector_to_irq(vector) (vector)
-#endif
+struct io_apic {
+ unsigned int index;
+ unsigned int unused[3];
+ unsigned int data;
+};
+
+static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
+{
+ return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx)
+ + (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK);
+}
+
+static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
+{
+ struct io_apic __iomem *io_apic = io_apic_base(apic);
+ writel(reg, &io_apic->index);
+ return readl(&io_apic->data);
+}
+
+static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
+{
+ struct io_apic __iomem *io_apic = io_apic_base(apic);
+ writel(reg, &io_apic->index);
+ writel(value, &io_apic->data);
+}
+
+/*
+ * Re-write a value: to be used for read-modify-write
+ * cycles where the read already set up the index register.
+ */
+static inline void io_apic_modify(unsigned int apic, unsigned int value)
+{
+ struct io_apic __iomem *io_apic = io_apic_base(apic);
+ writel(value, &io_apic->data);
+}
+
+/*
+ * Synchronize the IO-APIC and the CPU by doing
+ * a dummy read from the IO-APIC
+ */
+static inline void io_apic_sync(unsigned int apic)
+{
+ struct io_apic __iomem *io_apic = io_apic_base(apic);
+ readl(&io_apic->data);
+}
#define __DO_ACTION(R, ACTION, FINAL) \
\
FINAL; \
}
+union entry_union {
+ struct { u32 w1, w2; };
+ struct IO_APIC_route_entry entry;
+};
+
+static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin)
+{
+ union entry_union eu;
+ unsigned long flags;
+ spin_lock_irqsave(&ioapic_lock, flags);
+ eu.w1 = io_apic_read(apic, 0x10 + 2 * pin);
+ eu.w2 = io_apic_read(apic, 0x11 + 2 * pin);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+ return eu.entry;
+}
+
+/*
+ * When we write a new IO APIC routing entry, we need to write the high
+ * word first! If the mask bit in the low word is clear, we will enable
+ * the interrupt, and we need to make sure the entry is fully populated
+ * before that happens.
+ */
+static void
+__ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
+{
+ union entry_union eu;
+ eu.entry = e;
+ io_apic_write(apic, 0x11 + 2*pin, eu.w2);
+ io_apic_write(apic, 0x10 + 2*pin, eu.w1);
+}
+
+static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&ioapic_lock, flags);
+ __ioapic_write_entry(apic, pin, e);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
+/*
+ * When we mask an IO APIC routing entry, we need to write the low
+ * word first, in order to set the mask bit before we change the
+ * high bits!
+ */
+static void ioapic_mask_entry(int apic, int pin)
+{
+ unsigned long flags;
+ union entry_union eu = { .entry.mask = 1 };
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ io_apic_write(apic, 0x10 + 2*pin, eu.w1);
+ io_apic_write(apic, 0x11 + 2*pin, eu.w2);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
#ifdef CONFIG_SMP
+static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, u8 vector)
+{
+ int apic, pin;
+ struct irq_pin_list *entry = irq_2_pin + irq;
+
+ BUG_ON(irq >= NR_IRQS);
+ for (;;) {
+ unsigned int reg;
+ apic = entry->apic;
+ pin = entry->pin;
+ if (pin == -1)
+ break;
+ io_apic_write(apic, 0x11 + pin*2, dest);
+ reg = io_apic_read(apic, 0x10 + pin*2);
+ reg &= ~0x000000ff;
+ reg |= vector;
+ io_apic_modify(apic, reg);
+ if (!entry->next)
+ break;
+ entry = irq_2_pin + entry->next;
+ }
+}
+
static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask)
{
unsigned long flags;
unsigned int dest;
cpumask_t tmp;
+ int vector;
cpus_and(tmp, mask, cpu_online_map);
if (cpus_empty(tmp))
cpus_and(mask, tmp, CPU_MASK_ALL);
- dest = cpu_mask_to_apicid(mask);
+ vector = assign_irq_vector(irq, mask, &tmp);
+ if (vector < 0)
+ return;
+
+ dest = cpu_mask_to_apicid(tmp);
/*
* Only the high 8 bits are valid.
dest = SET_APIC_LOGICAL_ID(dest);
spin_lock_irqsave(&ioapic_lock, flags);
- __DO_ACTION(1, = dest, )
- set_irq_info(irq, mask);
+ __target_IO_APIC_irq(irq, dest, vector);
+ set_native_irq_info(irq, mask);
spin_unlock_irqrestore(&ioapic_lock, flags);
}
#endif
-static u8 gsi_2_irq[NR_IRQ_VECTORS] = { [0 ... NR_IRQ_VECTORS-1] = 0xFF };
-
/*
* The common case is 1:1 IRQ<->pin mappings. Sometimes there are
* shared ISA-space IRQs, so we have to support them. We are super
static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
{
struct IO_APIC_route_entry entry;
- unsigned long flags;
/* Check delivery_mode to be sure we're not clearing an SMI pin */
- spin_lock_irqsave(&ioapic_lock, flags);
- *(((int*)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
- *(((int*)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
- spin_unlock_irqrestore(&ioapic_lock, flags);
+ entry = ioapic_read_entry(apic, pin);
if (entry.delivery_mode == dest_SMI)
return;
/*
* Disable it in the IO-APIC irq-routing table:
*/
- memset(&entry, 0, sizeof(entry));
- entry.mask = 1;
- spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry) + 0));
- io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry) + 1));
- spin_unlock_irqrestore(&ioapic_lock, flags);
+ ioapic_mask_entry(apic, pin);
}
static void clear_IO_APIC (void)
clear_IO_APIC_pin(apic, pin);
}
-/*
- * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to
- * specific CPU-side IRQs.
- */
-
-#define MAX_PIRQS 8
-static int pirq_entries [MAX_PIRQS];
-static int pirqs_enabled;
int skip_ioapic_setup;
int ioapic_force;
static int __init disable_ioapic_setup(char *str)
{
skip_ioapic_setup = 1;
- return 1;
+ return 0;
}
+early_param("noapic", disable_ioapic_setup);
-static int __init enable_ioapic_setup(char *str)
+/* Actually the next is obsolete, but keep it for paranoid reasons -AK */
+static int __init disable_timer_pin_setup(char *arg)
{
- ioapic_force = 1;
- skip_ioapic_setup = 0;
+ disable_timer_pin_1 = 1;
return 1;
}
-
-__setup("noapic", disable_ioapic_setup);
-__setup("apic", enable_ioapic_setup);
+__setup("disable_timer_pin_1", disable_timer_pin_setup);
static int __init setup_disable_8254_timer(char *s)
{
__setup("disable_8254_timer", setup_disable_8254_timer);
__setup("enable_8254_timer", setup_enable_8254_timer);
-#include <asm/pci-direct.h>
-#include <linux/pci_ids.h>
-#include <linux/pci.h>
-
-
-#ifdef CONFIG_ACPI
-
-static int nvidia_hpet_detected __initdata;
-
-static int __init nvidia_hpet_check(unsigned long phys, unsigned long size)
-{
- nvidia_hpet_detected = 1;
- return 0;
-}
-#endif
-
-/* Temporary Hack. Nvidia and VIA boards currently only work with IO-APIC
- off. Check for an Nvidia or VIA PCI bridge and turn it off.
- Use pci direct infrastructure because this runs before the PCI subsystem.
-
- Can be overwritten with "apic"
-
- And another hack to disable the IOMMU on VIA chipsets.
-
- ... and others. Really should move this somewhere else.
-
- Kludge-O-Rama. */
-void __init check_ioapic(void)
-{
- int num,slot,func;
- /* Poor man's PCI discovery */
- for (num = 0; num < 32; num++) {
- for (slot = 0; slot < 32; slot++) {
- for (func = 0; func < 8; func++) {
- u32 class;
- u32 vendor;
- u8 type;
- class = read_pci_config(num,slot,func,
- PCI_CLASS_REVISION);
- if (class == 0xffffffff)
- break;
-
- if ((class >> 16) != PCI_CLASS_BRIDGE_PCI)
- continue;
-
- vendor = read_pci_config(num, slot, func,
- PCI_VENDOR_ID);
- vendor &= 0xffff;
- switch (vendor) {
- case PCI_VENDOR_ID_VIA:
-#ifdef CONFIG_GART_IOMMU
- if ((end_pfn > MAX_DMA32_PFN ||
- force_iommu) &&
- !iommu_aperture_allowed) {
- printk(KERN_INFO
- "Looks like a VIA chipset. Disabling IOMMU. Override with \"iommu=allowed\"\n");
- iommu_aperture_disabled = 1;
- }
-#endif
- return;
- case PCI_VENDOR_ID_NVIDIA:
-#ifdef CONFIG_ACPI
- /*
- * All timer overrides on Nvidia are
- * wrong unless HPET is enabled.
- */
- nvidia_hpet_detected = 0;
- acpi_table_parse(ACPI_HPET,
- nvidia_hpet_check);
- if (nvidia_hpet_detected == 0) {
- acpi_skip_timer_override = 1;
- printk(KERN_INFO "Nvidia board "
- "detected. Ignoring ACPI "
- "timer override.\n");
- }
-#endif
- /* RED-PEN skip them on mptables too? */
- return;
-
- /* This should be actually default, but
- for 2.6.16 let's do it for ATI only where
- it's really needed. */
- case PCI_VENDOR_ID_ATI:
- if (timer_over_8254 == 1) {
- timer_over_8254 = 0;
- printk(KERN_INFO
- "ATI board detected. Disabling timer routing over 8254.\n");
- }
- return;
- }
-
-
- /* No multi-function device? */
- type = read_pci_config_byte(num,slot,func,
- PCI_HEADER_TYPE);
- if (!(type & 0x80))
- break;
- }
- }
- }
-}
-
-static int __init ioapic_pirq_setup(char *str)
-{
- int i, max;
- int ints[MAX_PIRQS+1];
-
- get_options(str, ARRAY_SIZE(ints), ints);
-
- for (i = 0; i < MAX_PIRQS; i++)
- pirq_entries[i] = -1;
-
- pirqs_enabled = 1;
- apic_printk(APIC_VERBOSE, "PIRQ redirection, working around broken MP-BIOS.\n");
- max = MAX_PIRQS;
- if (ints[0] < MAX_PIRQS)
- max = ints[0];
-
- for (i = 0; i < max; i++) {
- apic_printk(APIC_VERBOSE, "... PIRQ%d -> IRQ %d\n", i, ints[i+1]);
- /*
- * PIRQs are mapped upside down, usually.
- */
- pirq_entries[MAX_PIRQS-i-1] = ints[i+1];
- }
- return 1;
-}
-
-__setup("pirq=", ioapic_pirq_setup);
/*
* Find the IRQ entry number of a certain pin.
for (i = 0; i < mp_irq_entries; i++) {
int lbus = mp_irqs[i].mpc_srcbus;
- if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA ||
- mp_bus_id_to_type[lbus] == MP_BUS_EISA ||
- mp_bus_id_to_type[lbus] == MP_BUS_MCA) &&
+ if (test_bit(lbus, mp_bus_not_pci) &&
(mp_irqs[i].mpc_irqtype == type) &&
(mp_irqs[i].mpc_srcbusirq == irq))
for (i = 0; i < mp_irq_entries; i++) {
int lbus = mp_irqs[i].mpc_srcbus;
- if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA ||
- mp_bus_id_to_type[lbus] == MP_BUS_EISA ||
- mp_bus_id_to_type[lbus] == MP_BUS_MCA) &&
+ if (test_bit(lbus, mp_bus_not_pci) &&
(mp_irqs[i].mpc_irqtype == type) &&
(mp_irqs[i].mpc_srcbusirq == irq))
break;
mp_irqs[i].mpc_dstapic == MP_APIC_ALL)
break;
- if ((mp_bus_id_to_type[lbus] == MP_BUS_PCI) &&
+ if (!test_bit(lbus, mp_bus_not_pci) &&
!mp_irqs[i].mpc_irqtype &&
(bus == lbus) &&
(slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) {
return best_guess;
}
-/*
- * EISA Edge/Level control register, ELCR
- */
-static int EISA_ELCR(unsigned int irq)
-{
- if (irq < 16) {
- unsigned int port = 0x4d0 + (irq >> 3);
- return (inb(port) >> (irq & 7)) & 1;
- }
- apic_printk(APIC_VERBOSE, "Broken MPtable reports ISA irq %d\n", irq);
- return 0;
-}
-
-/* EISA interrupts are always polarity zero and can be edge or level
- * trigger depending on the ELCR value. If an interrupt is listed as
- * EISA conforming in the MP table, that means its trigger type must
- * be read in from the ELCR */
-
-#define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].mpc_srcbusirq))
-#define default_EISA_polarity(idx) (0)
-
/* ISA interrupts are always polarity zero edge triggered,
* when listed as conforming in the MP table. */
#define default_PCI_trigger(idx) (1)
#define default_PCI_polarity(idx) (1)
-/* MCA interrupts are always polarity zero level triggered,
- * when listed as conforming in the MP table. */
-
-#define default_MCA_trigger(idx) (1)
-#define default_MCA_polarity(idx) (0)
-
static int __init MPBIOS_polarity(int idx)
{
int bus = mp_irqs[idx].mpc_srcbus;
switch (mp_irqs[idx].mpc_irqflag & 3)
{
case 0: /* conforms, ie. bus-type dependent polarity */
- {
- switch (mp_bus_id_to_type[bus])
- {
- case MP_BUS_ISA: /* ISA pin */
- {
- polarity = default_ISA_polarity(idx);
- break;
- }
- case MP_BUS_EISA: /* EISA pin */
- {
- polarity = default_EISA_polarity(idx);
- break;
- }
- case MP_BUS_PCI: /* PCI pin */
- {
- polarity = default_PCI_polarity(idx);
- break;
- }
- case MP_BUS_MCA: /* MCA pin */
- {
- polarity = default_MCA_polarity(idx);
- break;
- }
- default:
- {
- printk(KERN_WARNING "broken BIOS!!\n");
- polarity = 1;
- break;
- }
- }
+ if (test_bit(bus, mp_bus_not_pci))
+ polarity = default_ISA_polarity(idx);
+ else
+ polarity = default_PCI_polarity(idx);
break;
- }
case 1: /* high active */
{
polarity = 0;
switch ((mp_irqs[idx].mpc_irqflag>>2) & 3)
{
case 0: /* conforms, ie. bus-type dependent */
- {
- switch (mp_bus_id_to_type[bus])
- {
- case MP_BUS_ISA: /* ISA pin */
- {
- trigger = default_ISA_trigger(idx);
- break;
- }
- case MP_BUS_EISA: /* EISA pin */
- {
- trigger = default_EISA_trigger(idx);
- break;
- }
- case MP_BUS_PCI: /* PCI pin */
- {
- trigger = default_PCI_trigger(idx);
- break;
- }
- case MP_BUS_MCA: /* MCA pin */
- {
- trigger = default_MCA_trigger(idx);
- break;
- }
- default:
- {
- printk(KERN_WARNING "broken BIOS!!\n");
- trigger = 1;
- break;
- }
- }
+ if (test_bit(bus, mp_bus_not_pci))
+ trigger = default_ISA_trigger(idx);
+ else
+ trigger = default_PCI_trigger(idx);
break;
- }
case 1: /* edge */
{
trigger = 0;
return MPBIOS_trigger(idx);
}
-static int next_irq = 16;
-
-/*
- * gsi_irq_sharing -- Name overload! "irq" can be either a legacy IRQ
- * in the range 0-15, a linux IRQ in the range 0-223, or a GSI number
- * from ACPI, which can reach 800 in large boxen.
- *
- * Compact the sparse GSI space into a sequential IRQ series and reuse
- * vectors if possible.
- */
-int gsi_irq_sharing(int gsi)
-{
- int i, tries, vector;
-
- BUG_ON(gsi >= NR_IRQ_VECTORS);
-
- if (platform_legacy_irq(gsi))
- return gsi;
-
- if (gsi_2_irq[gsi] != 0xFF)
- return (int)gsi_2_irq[gsi];
-
- tries = NR_IRQS;
- try_again:
- vector = assign_irq_vector(gsi);
-
- /*
- * Sharing vectors means sharing IRQs, so scan irq_vectors for previous
- * use of vector and if found, return that IRQ. However, we never want
- * to share legacy IRQs, which usually have a different trigger mode
- * than PCI.
- */
- for (i = 0; i < NR_IRQS; i++)
- if (IO_APIC_VECTOR(i) == vector)
- break;
- if (platform_legacy_irq(i)) {
- if (--tries >= 0) {
- IO_APIC_VECTOR(i) = 0;
- goto try_again;
- }
- panic("gsi_irq_sharing: didn't find an IRQ using vector 0x%02X for GSI %d", vector, gsi);
- }
- if (i < NR_IRQS) {
- gsi_2_irq[gsi] = i;
- printk(KERN_INFO "GSI %d sharing vector 0x%02X and IRQ %d\n",
- gsi, vector, i);
- return i;
- }
-
- i = next_irq++;
- BUG_ON(i >= NR_IRQS);
- gsi_2_irq[gsi] = i;
- IO_APIC_VECTOR(i) = vector;
- printk(KERN_INFO "GSI %d assigned vector 0x%02X and IRQ %d\n",
- gsi, vector, i);
- return i;
-}
-
static int pin_2_irq(int idx, int apic, int pin)
{
int irq, i;
if (mp_irqs[idx].mpc_dstirq != pin)
printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
- switch (mp_bus_id_to_type[bus])
- {
- case MP_BUS_ISA: /* ISA pin */
- case MP_BUS_EISA:
- case MP_BUS_MCA:
- {
- irq = mp_irqs[idx].mpc_srcbusirq;
- break;
- }
- case MP_BUS_PCI: /* PCI pin */
- {
- /*
- * PCI IRQs are mapped in order
- */
- i = irq = 0;
- while (i < apic)
- irq += nr_ioapic_registers[i++];
- irq += pin;
- irq = gsi_irq_sharing(irq);
- break;
- }
- default:
- {
- printk(KERN_ERR "unknown bus type %d.\n",bus);
- irq = 0;
- break;
- }
- }
- BUG_ON(irq >= NR_IRQS);
-
- /*
- * PCI IRQ command line redirection. Yes, limits are hardcoded.
- */
- if ((pin >= 16) && (pin <= 23)) {
- if (pirq_entries[pin-16] != -1) {
- if (!pirq_entries[pin-16]) {
- apic_printk(APIC_VERBOSE, "disabling PIRQ%d\n", pin-16);
- } else {
- irq = pirq_entries[pin-16];
- apic_printk(APIC_VERBOSE, "using PIRQ%d -> IRQ %d\n",
- pin-16, irq);
- }
- }
+ if (test_bit(bus, mp_bus_not_pci)) {
+ irq = mp_irqs[idx].mpc_srcbusirq;
+ } else {
+ /*
+ * PCI IRQs are mapped in order
+ */
+ i = irq = 0;
+ while (i < apic)
+ irq += nr_ioapic_registers[i++];
+ irq += pin;
}
BUG_ON(irq >= NR_IRQS);
return irq;
}
/* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */
-u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_DEVICE_VECTOR , 0 };
+static u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = {
+ [0] = FIRST_EXTERNAL_VECTOR + 0,
+ [1] = FIRST_EXTERNAL_VECTOR + 1,
+ [2] = FIRST_EXTERNAL_VECTOR + 2,
+ [3] = FIRST_EXTERNAL_VECTOR + 3,
+ [4] = FIRST_EXTERNAL_VECTOR + 4,
+ [5] = FIRST_EXTERNAL_VECTOR + 5,
+ [6] = FIRST_EXTERNAL_VECTOR + 6,
+ [7] = FIRST_EXTERNAL_VECTOR + 7,
+ [8] = FIRST_EXTERNAL_VECTOR + 8,
+ [9] = FIRST_EXTERNAL_VECTOR + 9,
+ [10] = FIRST_EXTERNAL_VECTOR + 10,
+ [11] = FIRST_EXTERNAL_VECTOR + 11,
+ [12] = FIRST_EXTERNAL_VECTOR + 12,
+ [13] = FIRST_EXTERNAL_VECTOR + 13,
+ [14] = FIRST_EXTERNAL_VECTOR + 14,
+ [15] = FIRST_EXTERNAL_VECTOR + 15,
+};
+
+static cpumask_t irq_domain[NR_IRQ_VECTORS] __read_mostly = {
+ [0] = CPU_MASK_ALL,
+ [1] = CPU_MASK_ALL,
+ [2] = CPU_MASK_ALL,
+ [3] = CPU_MASK_ALL,
+ [4] = CPU_MASK_ALL,
+ [5] = CPU_MASK_ALL,
+ [6] = CPU_MASK_ALL,
+ [7] = CPU_MASK_ALL,
+ [8] = CPU_MASK_ALL,
+ [9] = CPU_MASK_ALL,
+ [10] = CPU_MASK_ALL,
+ [11] = CPU_MASK_ALL,
+ [12] = CPU_MASK_ALL,
+ [13] = CPU_MASK_ALL,
+ [14] = CPU_MASK_ALL,
+ [15] = CPU_MASK_ALL,
+};
-int assign_irq_vector(int irq)
+static int __assign_irq_vector(int irq, cpumask_t mask, cpumask_t *result)
{
- static int current_vector = FIRST_DEVICE_VECTOR, offset = 0;
+ /*
+ * NOTE! The local APIC isn't very good at handling
+ * multiple interrupts at the same interrupt level.
+ * As the interrupt level is determined by taking the
+ * vector number and shifting that right by 4, we
+ * want to spread these out a bit so that they don't
+ * all fall in the same interrupt level.
+ *
+ * Also, we've got to be careful not to trash gate
+ * 0x80, because int 0x80 is hm, kind of importantish. ;)
+ */
+ static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0;
+ int old_vector = -1;
+ int cpu;
- BUG_ON(irq != AUTO_ASSIGN && (unsigned)irq >= NR_IRQ_VECTORS);
- if (irq != AUTO_ASSIGN && IO_APIC_VECTOR(irq) > 0)
- return IO_APIC_VECTOR(irq);
+ BUG_ON((unsigned)irq >= NR_IRQ_VECTORS);
+
+ /* Only try and allocate irqs on cpus that are present */
+ cpus_and(mask, mask, cpu_online_map);
+
+ if (irq_vector[irq] > 0)
+ old_vector = irq_vector[irq];
+ if (old_vector > 0) {
+ cpus_and(*result, irq_domain[irq], mask);
+ if (!cpus_empty(*result))
+ return old_vector;
+ }
+
+ for_each_cpu_mask(cpu, mask) {
+ cpumask_t domain, new_mask;
+ int new_cpu;
+ int vector, offset;
+
+ domain = vector_allocation_domain(cpu);
+ cpus_and(new_mask, domain, cpu_online_map);
+
+ vector = current_vector;
+ offset = current_offset;
next:
- current_vector += 8;
- if (current_vector == IA32_SYSCALL_VECTOR)
- goto next;
-
- if (current_vector >= FIRST_SYSTEM_VECTOR) {
- /* If we run out of vectors on large boxen, must share them. */
- offset = (offset + 1) % 8;
- current_vector = FIRST_DEVICE_VECTOR + offset;
+ vector += 8;
+ if (vector >= FIRST_SYSTEM_VECTOR) {
+ /* If we run out of vectors on large boxen, must share them. */
+ offset = (offset + 1) % 8;
+ vector = FIRST_DEVICE_VECTOR + offset;
+ }
+ if (unlikely(current_vector == vector))
+ continue;
+ if (vector == IA32_SYSCALL_VECTOR)
+ goto next;
+ for_each_cpu_mask(new_cpu, new_mask)
+ if (per_cpu(vector_irq, new_cpu)[vector] != -1)
+ goto next;
+ /* Found one! */
+ current_vector = vector;
+ current_offset = offset;
+ if (old_vector >= 0) {
+ cpumask_t old_mask;
+ int old_cpu;
+ cpus_and(old_mask, irq_domain[irq], cpu_online_map);
+ for_each_cpu_mask(old_cpu, old_mask)
+ per_cpu(vector_irq, old_cpu)[old_vector] = -1;
+ }
+ for_each_cpu_mask(new_cpu, new_mask)
+ per_cpu(vector_irq, new_cpu)[vector] = irq;
+ irq_vector[irq] = vector;
+ irq_domain[irq] = domain;
+ cpus_and(*result, domain, mask);
+ return vector;
}
+ return -ENOSPC;
+}
+
+static int assign_irq_vector(int irq, cpumask_t mask, cpumask_t *result)
+{
+ int vector;
+ unsigned long flags;
+
+ spin_lock_irqsave(&vector_lock, flags);
+ vector = __assign_irq_vector(irq, mask, result);
+ spin_unlock_irqrestore(&vector_lock, flags);
+ return vector;
+}
+
+static void __clear_irq_vector(int irq)
+{
+ cpumask_t mask;
+ int cpu, vector;
+
+ BUG_ON(!irq_vector[irq]);
- vector_irq[current_vector] = irq;
- if (irq != AUTO_ASSIGN)
- IO_APIC_VECTOR(irq) = current_vector;
+ vector = irq_vector[irq];
+ cpus_and(mask, irq_domain[irq], cpu_online_map);
+ for_each_cpu_mask(cpu, mask)
+ per_cpu(vector_irq, cpu)[vector] = -1;
- return current_vector;
+ irq_vector[irq] = 0;
+ irq_domain[irq] = CPU_MASK_NONE;
}
+void __setup_vector_irq(int cpu)
+{
+ /* Initialize vector_irq on a new cpu */
+ /* This function must be called with vector_lock held */
+ int irq, vector;
+
+ /* Mark the inuse vectors */
+ for (irq = 0; irq < NR_IRQ_VECTORS; ++irq) {
+ if (!cpu_isset(cpu, irq_domain[irq]))
+ continue;
+ vector = irq_vector[irq];
+ per_cpu(vector_irq, cpu)[vector] = irq;
+ }
+ /* Mark the free vectors */
+ for (vector = 0; vector < NR_VECTORS; ++vector) {
+ irq = per_cpu(vector_irq, cpu)[vector];
+ if (irq < 0)
+ continue;
+ if (!cpu_isset(cpu, irq_domain[irq]))
+ per_cpu(vector_irq, cpu)[vector] = -1;
+ }
+}
+
+
extern void (*interrupt[NR_IRQS])(void);
-static struct hw_interrupt_type ioapic_level_type;
-static struct hw_interrupt_type ioapic_edge_type;
+
+static struct irq_chip ioapic_chip;
#define IOAPIC_AUTO -1
#define IOAPIC_EDGE 0
#define IOAPIC_LEVEL 1
-static inline void ioapic_register_intr(int irq, int vector, unsigned long trigger)
-{
- if (use_pci_vector() && !platform_legacy_irq(irq)) {
- if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
- trigger == IOAPIC_LEVEL)
- irq_desc[vector].handler = &ioapic_level_type;
- else
- irq_desc[vector].handler = &ioapic_edge_type;
- set_intr_gate(vector, interrupt[vector]);
- } else {
- if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
- trigger == IOAPIC_LEVEL)
- irq_desc[irq].handler = &ioapic_level_type;
- else
- irq_desc[irq].handler = &ioapic_edge_type;
- set_intr_gate(vector, interrupt[irq]);
+static void ioapic_register_intr(int irq, int vector, unsigned long trigger)
+{
+ if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
+ trigger == IOAPIC_LEVEL)
+ set_irq_chip_and_handler_name(irq, &ioapic_chip,
+ handle_fasteoi_irq, "fasteoi");
+ else {
+ irq_desc[irq].status |= IRQ_DELAYED_DISABLE;
+ set_irq_chip_and_handler_name(irq, &ioapic_chip,
+ handle_edge_irq, "edge");
}
}
-
-static void __init setup_IO_APIC_irqs(void)
+static void __init setup_IO_APIC_irq(int apic, int pin, int idx, int irq)
{
struct IO_APIC_route_entry entry;
- int apic, pin, idx, irq, first_notcon = 1, vector;
+ int vector;
unsigned long flags;
+
+ /*
+ * add it to the IO-APIC irq-routing table:
+ */
+ memset(&entry,0,sizeof(entry));
+
+ entry.delivery_mode = INT_DELIVERY_MODE;
+ entry.dest_mode = INT_DEST_MODE;
+ entry.mask = 0; /* enable IRQ */
+ entry.dest = cpu_mask_to_apicid(TARGET_CPUS);
+
+ entry.trigger = irq_trigger(idx);
+ entry.polarity = irq_polarity(idx);
+
+ if (irq_trigger(idx)) {
+ entry.trigger = 1;
+ entry.mask = 1;
+ entry.dest = cpu_mask_to_apicid(TARGET_CPUS);
+ }
+
+ if (!apic && !IO_APIC_IRQ(irq))
+ return;
+
+ if (IO_APIC_IRQ(irq)) {
+ cpumask_t mask;
+ vector = assign_irq_vector(irq, TARGET_CPUS, &mask);
+ if (vector < 0)
+ return;
+
+ entry.dest = cpu_mask_to_apicid(mask);
+ entry.vector = vector;
+
+ ioapic_register_intr(irq, vector, IOAPIC_AUTO);
+ if (!apic && (irq < 16))
+ disable_8259A_irq(irq);
+ }
+
+ ioapic_write_entry(apic, pin, entry);
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ set_native_irq_info(irq, TARGET_CPUS);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+}
+
+static void __init setup_IO_APIC_irqs(void)
+{
+ int apic, pin, idx, irq, first_notcon = 1;
+
apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
for (apic = 0; apic < nr_ioapics; apic++) {
for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
- /*
- * add it to the IO-APIC irq-routing table:
- */
- memset(&entry,0,sizeof(entry));
-
- entry.delivery_mode = INT_DELIVERY_MODE;
- entry.dest_mode = INT_DEST_MODE;
- entry.mask = 0; /* enable IRQ */
- entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
-
idx = find_irq_entry(apic,pin,mp_INT);
if (idx == -1) {
if (first_notcon) {
continue;
}
- entry.trigger = irq_trigger(idx);
- entry.polarity = irq_polarity(idx);
-
- if (irq_trigger(idx)) {
- entry.trigger = 1;
- entry.mask = 1;
- entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
- }
-
irq = pin_2_irq(idx, apic, pin);
add_pin_to_irq(irq, apic, pin);
- if (!apic && !IO_APIC_IRQ(irq))
- continue;
-
- if (IO_APIC_IRQ(irq)) {
- vector = assign_irq_vector(irq);
- entry.vector = vector;
+ setup_IO_APIC_irq(apic, pin, idx, irq);
- ioapic_register_intr(irq, vector, IOAPIC_AUTO);
- if (!apic && (irq < 16))
- disable_8259A_irq(irq);
- }
- spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1));
- io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0));
- set_native_irq_info(irq, TARGET_CPUS);
- spin_unlock_irqrestore(&ioapic_lock, flags);
}
}
*/
entry.dest_mode = INT_DEST_MODE;
entry.mask = 0; /* unmask IRQ now */
- entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
+ entry.dest = cpu_mask_to_apicid(TARGET_CPUS);
entry.delivery_mode = INT_DELIVERY_MODE;
entry.polarity = 0;
entry.trigger = 0;
* The timer IRQ doesn't have to know that behind the
* scene we have a 8259A-master in AEOI mode ...
*/
- irq_desc[0].handler = &ioapic_edge_type;
+ set_irq_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, "edge");
/*
* Add it to the IO-APIC irq-routing table:
printk(KERN_DEBUG ".... IRQ redirection table:\n");
- printk(KERN_DEBUG " NR Log Phy Mask Trig IRR Pol"
- " Stat Dest Deli Vect: \n");
+ printk(KERN_DEBUG " NR Dst Mask Trig IRR Pol"
+ " Stat Dmod Deli Vect: \n");
for (i = 0; i <= reg_01.bits.entries; i++) {
struct IO_APIC_route_entry entry;
- spin_lock_irqsave(&ioapic_lock, flags);
- *(((int *)&entry)+0) = io_apic_read(apic, 0x10+i*2);
- *(((int *)&entry)+1) = io_apic_read(apic, 0x11+i*2);
- spin_unlock_irqrestore(&ioapic_lock, flags);
+ entry = ioapic_read_entry(apic, i);
- printk(KERN_DEBUG " %02x %03X %02X ",
+ printk(KERN_DEBUG " %02x %03X ",
i,
- entry.dest.logical.logical_dest,
- entry.dest.physical.physical_dest
+ entry.dest
);
printk("%1d %1d %1d %1d %1d %1d %1d %02X\n",
);
}
}
- if (use_pci_vector())
- printk(KERN_INFO "Using vector-based indexing\n");
printk(KERN_DEBUG "IRQ to pin mappings:\n");
for (i = 0; i < NR_IRQS; i++) {
struct irq_pin_list *entry = irq_2_pin + i;
if (entry->pin < 0)
continue;
- if (use_pci_vector() && !platform_legacy_irq(i))
- printk(KERN_DEBUG "IRQ%d ", IO_APIC_VECTOR(i));
- else
- printk(KERN_DEBUG "IRQ%d ", i);
+ printk(KERN_DEBUG "IRQ%d ", i);
for (;;) {
printk("-> %d:%d", entry->apic, entry->pin);
if (!entry->next)
irq_2_pin[i].pin = -1;
irq_2_pin[i].next = 0;
}
- if (!pirqs_enabled)
- for (i = 0; i < MAX_PIRQS; i++)
- pirq_entries[i] = -1;
/*
* The number of IO-APIC IRQ registers (== #pins):
/* See if any of the pins is in ExtINT mode */
for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
struct IO_APIC_route_entry entry;
- spin_lock_irqsave(&ioapic_lock, flags);
- *(((int *)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
- *(((int *)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
- spin_unlock_irqrestore(&ioapic_lock, flags);
-
+ entry = ioapic_read_entry(apic, pin);
/* If the interrupt line is enabled and in ExtInt mode
* I have found the pin where the i8259 is connected.
*/
if (ioapic_i8259.pin != -1) {
struct IO_APIC_route_entry entry;
- unsigned long flags;
memset(&entry, 0, sizeof(entry));
entry.mask = 0; /* Enabled */
entry.dest_mode = 0; /* Physical */
entry.delivery_mode = dest_ExtINT; /* ExtInt */
entry.vector = 0;
- entry.dest.physical.physical_dest =
- GET_APIC_ID(apic_read(APIC_ID));
+ entry.dest = GET_APIC_ID(apic_read(APIC_ID));
/*
* Add it to the IO-APIC irq-routing table:
*/
- spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(ioapic_i8259.apic, 0x11+2*ioapic_i8259.pin,
- *(((int *)&entry)+1));
- io_apic_write(ioapic_i8259.apic, 0x10+2*ioapic_i8259.pin,
- *(((int *)&entry)+0));
- spin_unlock_irqrestore(&ioapic_lock, flags);
+ ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry);
}
disconnect_bsp_APIC(ioapic_i8259.pin != -1);
}
-/*
- * function to set the IO-APIC physical IDs based on the
- * values stored in the MPC table.
- *
- * by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999
- */
-
-static void __init setup_ioapic_ids_from_mpc (void)
-{
- union IO_APIC_reg_00 reg_00;
- int apic;
- int i;
- unsigned char old_id;
- unsigned long flags;
-
- /*
- * Set the IOAPIC ID to the value stored in the MPC table.
- */
- for (apic = 0; apic < nr_ioapics; apic++) {
-
- /* Read the register 0 value */
- spin_lock_irqsave(&ioapic_lock, flags);
- reg_00.raw = io_apic_read(apic, 0);
- spin_unlock_irqrestore(&ioapic_lock, flags);
-
- old_id = mp_ioapics[apic].mpc_apicid;
-
-
- printk(KERN_INFO "Using IO-APIC %d\n", mp_ioapics[apic].mpc_apicid);
-
-
- /*
- * We need to adjust the IRQ routing table
- * if the ID changed.
- */
- if (old_id != mp_ioapics[apic].mpc_apicid)
- for (i = 0; i < mp_irq_entries; i++)
- if (mp_irqs[i].mpc_dstapic == old_id)
- mp_irqs[i].mpc_dstapic
- = mp_ioapics[apic].mpc_apicid;
-
- /*
- * Read the right value from the MPC table and
- * write it into the ID register.
- */
- apic_printk(APIC_VERBOSE,KERN_INFO "...changing IO-APIC physical APIC ID to %d ...",
- mp_ioapics[apic].mpc_apicid);
-
- reg_00.bits.ID = mp_ioapics[apic].mpc_apicid;
- spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(apic, 0, reg_00.raw);
- spin_unlock_irqrestore(&ioapic_lock, flags);
-
- /*
- * Sanity check
- */
- spin_lock_irqsave(&ioapic_lock, flags);
- reg_00.raw = io_apic_read(apic, 0);
- spin_unlock_irqrestore(&ioapic_lock, flags);
- if (reg_00.bits.ID != mp_ioapics[apic].mpc_apicid)
- printk("could not set ID!\n");
- else
- apic_printk(APIC_VERBOSE," ok.\n");
- }
-}
-
/*
* There is a nasty bug in some older SMP boards, their mptable lies
* about the timer IRQ. We do the following to work around the situation:
* an edge even if it isn't on the 8259A...
*/
-static unsigned int startup_edge_ioapic_irq(unsigned int irq)
+static unsigned int startup_ioapic_irq(unsigned int irq)
{
int was_pending = 0;
unsigned long flags;
return was_pending;
}
-/*
- * Once we have recorded IRQ_PENDING already, we can mask the
- * interrupt for real. This prevents IRQ storms from unhandled
- * devices.
- */
-static void ack_edge_ioapic_irq(unsigned int irq)
-{
- move_irq(irq);
- if ((irq_desc[irq].status & (IRQ_PENDING | IRQ_DISABLED))
- == (IRQ_PENDING | IRQ_DISABLED))
- mask_IO_APIC_irq(irq);
- ack_APIC_irq();
-}
-
-/*
- * Level triggered interrupts can just be masked,
- * and shutting down and starting up the interrupt
- * is the same as enabling and disabling them -- except
- * with a startup need to return a "was pending" value.
- *
- * Level triggered interrupts are special because we
- * do not touch any IO-APIC register while handling
- * them. We ack the APIC in the end-IRQ handler, not
- * in the start-IRQ-handler. Protection against reentrance
- * from the same interrupt is still provided, both by the
- * generic IRQ layer and by the fact that an unacked local
- * APIC does not accept IRQs.
- */
-static unsigned int startup_level_ioapic_irq (unsigned int irq)
-{
- unmask_IO_APIC_irq(irq);
-
- return 0; /* don't check for pending */
-}
-
-static void end_level_ioapic_irq (unsigned int irq)
-{
- move_irq(irq);
- ack_APIC_irq();
-}
-
-#ifdef CONFIG_PCI_MSI
-static unsigned int startup_edge_ioapic_vector(unsigned int vector)
-{
- int irq = vector_to_irq(vector);
-
- return startup_edge_ioapic_irq(irq);
-}
-
-static void ack_edge_ioapic_vector(unsigned int vector)
-{
- int irq = vector_to_irq(vector);
-
- move_native_irq(vector);
- ack_edge_ioapic_irq(irq);
-}
-
-static unsigned int startup_level_ioapic_vector (unsigned int vector)
-{
- int irq = vector_to_irq(vector);
-
- return startup_level_ioapic_irq (irq);
-}
-
-static void end_level_ioapic_vector (unsigned int vector)
-{
- int irq = vector_to_irq(vector);
-
- move_native_irq(vector);
- end_level_ioapic_irq(irq);
-}
-
-static void mask_IO_APIC_vector (unsigned int vector)
-{
- int irq = vector_to_irq(vector);
-
- mask_IO_APIC_irq(irq);
-}
-
-static void unmask_IO_APIC_vector (unsigned int vector)
+static int ioapic_retrigger_irq(unsigned int irq)
{
- int irq = vector_to_irq(vector);
+ cpumask_t mask;
+ unsigned vector;
+ unsigned long flags;
- unmask_IO_APIC_irq(irq);
-}
+ spin_lock_irqsave(&vector_lock, flags);
+ vector = irq_vector[irq];
+ cpus_clear(mask);
+ cpu_set(first_cpu(irq_domain[irq]), mask);
-#ifdef CONFIG_SMP
-static void set_ioapic_affinity_vector (unsigned int vector,
- cpumask_t cpu_mask)
-{
- int irq = vector_to_irq(vector);
+ send_IPI_mask(mask, vector);
+ spin_unlock_irqrestore(&vector_lock, flags);
- set_native_irq_info(vector, cpu_mask);
- set_ioapic_affinity_irq(irq, cpu_mask);
+ return 1;
}
-#endif // CONFIG_SMP
-#endif // CONFIG_PCI_MSI
/*
* Level and edge triggered IO-APIC interrupts need different handling,
* races.
*/
-static struct hw_interrupt_type ioapic_edge_type __read_mostly = {
- .typename = "IO-APIC-edge",
- .startup = startup_edge_ioapic,
- .shutdown = shutdown_edge_ioapic,
- .enable = enable_edge_ioapic,
- .disable = disable_edge_ioapic,
- .ack = ack_edge_ioapic,
- .end = end_edge_ioapic,
-#ifdef CONFIG_SMP
- .set_affinity = set_ioapic_affinity,
+static void ack_apic_edge(unsigned int irq)
+{
+ move_native_irq(irq);
+ ack_APIC_irq();
+}
+
+static void ack_apic_level(unsigned int irq)
+{
+ int do_unmask_irq = 0;
+
+#if defined(CONFIG_GENERIC_PENDING_IRQ) || defined(CONFIG_IRQBALANCE)
+ /* If we are moving the irq we need to mask it */
+ if (unlikely(irq_desc[irq].status & IRQ_MOVE_PENDING)) {
+ do_unmask_irq = 1;
+ mask_IO_APIC_irq(irq);
+ }
#endif
-};
-static struct hw_interrupt_type ioapic_level_type __read_mostly = {
- .typename = "IO-APIC-level",
- .startup = startup_level_ioapic,
- .shutdown = shutdown_level_ioapic,
- .enable = enable_level_ioapic,
- .disable = disable_level_ioapic,
- .ack = mask_and_ack_level_ioapic,
- .end = end_level_ioapic,
+ /*
+ * We must acknowledge the irq before we move it or the acknowledge will
+ * not propogate properly.
+ */
+ ack_APIC_irq();
+
+ /* Now we can move and renable the irq */
+ move_masked_irq(irq);
+ if (unlikely(do_unmask_irq))
+ unmask_IO_APIC_irq(irq);
+}
+
+static struct irq_chip ioapic_chip __read_mostly = {
+ .name = "IO-APIC",
+ .startup = startup_ioapic_irq,
+ .mask = mask_IO_APIC_irq,
+ .unmask = unmask_IO_APIC_irq,
+ .ack = ack_apic_edge,
+ .eoi = ack_apic_level,
#ifdef CONFIG_SMP
- .set_affinity = set_ioapic_affinity,
+ .set_affinity = set_ioapic_affinity_irq,
#endif
+ .retrigger = ioapic_retrigger_irq,
};
static inline void init_IO_APIC_traps(void)
*/
for (irq = 0; irq < NR_IRQS ; irq++) {
int tmp = irq;
- if (use_pci_vector()) {
- if (!platform_legacy_irq(tmp))
- if ((tmp = vector_to_irq(tmp)) == -1)
- continue;
- }
- if (IO_APIC_IRQ(tmp) && !IO_APIC_VECTOR(tmp)) {
+ if (IO_APIC_IRQ(tmp) && !irq_vector[tmp]) {
/*
* Hmm.. We don't have an entry for this,
* so default to an old-fashioned 8259
make_8259A_irq(irq);
else
/* Strange. Oh, well.. */
- irq_desc[irq].handler = &no_irq_type;
+ irq_desc[irq].chip = &no_irq_chip;
}
}
}
entry1.dest_mode = 0; /* physical delivery */
entry1.mask = 0; /* unmask IRQ now */
- entry1.dest.physical.physical_dest = hard_smp_processor_id();
+ entry1.dest = hard_smp_processor_id();
entry1.delivery_mode = dest_ExtINT;
entry1.polarity = entry0.polarity;
entry1.trigger = 0;
spin_unlock_irqrestore(&ioapic_lock, flags);
}
-int timer_uses_ioapic_pin_0;
-
/*
* This code may look a bit paranoid, but it's supposed to cooperate with
* a wide range of boards and BIOS bugs. Fortunately only the timer IRQ
{
int apic1, pin1, apic2, pin2;
int vector;
+ cpumask_t mask;
/*
* get/set the timer IRQ vector:
*/
disable_8259A_irq(0);
- vector = assign_irq_vector(0);
- set_intr_gate(vector, interrupt[0]);
+ vector = assign_irq_vector(0, TARGET_CPUS, &mask);
/*
* Subtle, code in do_timer_interrupt() expects an AEOI
pin2 = ioapic_i8259.pin;
apic2 = ioapic_i8259.apic;
- if (pin1 == 0)
- timer_uses_ioapic_pin_0 = 1;
-
apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
vector, apic1, pin1, apic2, pin2);
apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
disable_8259A_irq(0);
- irq_desc[0].handler = &lapic_irq_type;
+ irq_desc[0].chip = &lapic_irq_type;
apic_write(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */
enable_8259A_irq(0);
apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n");
- /*
- * Set up the IO-APIC IRQ routing table.
- */
- if (!acpi_ioapic)
- setup_ioapic_ids_from_mpc();
sync_Arb_IDs();
setup_IO_APIC_irqs();
init_IO_APIC_traps();
{
struct IO_APIC_route_entry *entry;
struct sysfs_ioapic_data *data;
- unsigned long flags;
int i;
data = container_of(dev, struct sysfs_ioapic_data, dev);
entry = data->entry;
- spin_lock_irqsave(&ioapic_lock, flags);
- for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) {
- *(((int *)entry) + 1) = io_apic_read(dev->id, 0x11 + 2 * i);
- *(((int *)entry) + 0) = io_apic_read(dev->id, 0x10 + 2 * i);
- }
- spin_unlock_irqrestore(&ioapic_lock, flags);
+ for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ )
+ *entry = ioapic_read_entry(dev->id, i);
return 0;
}
reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid;
io_apic_write(dev->id, 0, reg_00.raw);
}
- for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) {
- io_apic_write(dev->id, 0x11+2*i, *(((int *)entry)+1));
- io_apic_write(dev->id, 0x10+2*i, *(((int *)entry)+0));
- }
spin_unlock_irqrestore(&ioapic_lock, flags);
+ for (i = 0; i < nr_ioapic_registers[dev->id]; i++)
+ ioapic_write_entry(dev->id, i, entry[i]);
return 0;
}
device_initcall(ioapic_init_sysfs);
-/* --------------------------------------------------------------------------
- ACPI-based IOAPIC Configuration
- -------------------------------------------------------------------------- */
+/*
+ * Dynamic irq allocate and deallocation
+ */
+int create_irq(void)
+{
+ /* Allocate an unused irq */
+ int irq;
+ int new;
+ int vector = 0;
+ unsigned long flags;
+ cpumask_t mask;
-#ifdef CONFIG_ACPI
+ irq = -ENOSPC;
+ spin_lock_irqsave(&vector_lock, flags);
+ for (new = (NR_IRQS - 1); new >= 0; new--) {
+ if (platform_legacy_irq(new))
+ continue;
+ if (irq_vector[new] != 0)
+ continue;
+ vector = __assign_irq_vector(new, TARGET_CPUS, &mask);
+ if (likely(vector > 0))
+ irq = new;
+ break;
+ }
+ spin_unlock_irqrestore(&vector_lock, flags);
-#define IO_APIC_MAX_ID 0xFE
+ if (irq >= 0) {
+ dynamic_irq_init(irq);
+ }
+ return irq;
+}
-int __init io_apic_get_version (int ioapic)
+void destroy_irq(unsigned int irq)
{
- union IO_APIC_reg_01 reg_01;
unsigned long flags;
- spin_lock_irqsave(&ioapic_lock, flags);
- reg_01.raw = io_apic_read(ioapic, 1);
- spin_unlock_irqrestore(&ioapic_lock, flags);
+ dynamic_irq_cleanup(irq);
+
+ spin_lock_irqsave(&vector_lock, flags);
+ __clear_irq_vector(irq);
+ spin_unlock_irqrestore(&vector_lock, flags);
+}
+
+/*
+ * MSI mesage composition
+ */
+#ifdef CONFIG_PCI_MSI
+static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)
+{
+ int vector;
+ unsigned dest;
+ cpumask_t tmp;
- return reg_01.bits.version;
+ vector = assign_irq_vector(irq, TARGET_CPUS, &tmp);
+ if (vector >= 0) {
+ dest = cpu_mask_to_apicid(tmp);
+
+ msg->address_hi = MSI_ADDR_BASE_HI;
+ msg->address_lo =
+ MSI_ADDR_BASE_LO |
+ ((INT_DEST_MODE == 0) ?
+ MSI_ADDR_DEST_MODE_PHYSICAL:
+ MSI_ADDR_DEST_MODE_LOGICAL) |
+ ((INT_DELIVERY_MODE != dest_LowestPrio) ?
+ MSI_ADDR_REDIRECTION_CPU:
+ MSI_ADDR_REDIRECTION_LOWPRI) |
+ MSI_ADDR_DEST_ID(dest);
+
+ msg->data =
+ MSI_DATA_TRIGGER_EDGE |
+ MSI_DATA_LEVEL_ASSERT |
+ ((INT_DELIVERY_MODE != dest_LowestPrio) ?
+ MSI_DATA_DELIVERY_FIXED:
+ MSI_DATA_DELIVERY_LOWPRI) |
+ MSI_DATA_VECTOR(vector);
+ }
+ return vector;
}
+#ifdef CONFIG_SMP
+static void set_msi_irq_affinity(unsigned int irq, cpumask_t mask)
+{
+ struct msi_msg msg;
+ unsigned int dest;
+ cpumask_t tmp;
+ int vector;
+
+ cpus_and(tmp, mask, cpu_online_map);
+ if (cpus_empty(tmp))
+ tmp = TARGET_CPUS;
+
+ cpus_and(mask, tmp, CPU_MASK_ALL);
+
+ msix_flush_writes(irq);
+ vector = assign_irq_vector(irq, mask, &tmp);
+ if (vector < 0)
+ return;
+
+ dest = cpu_mask_to_apicid(tmp);
+
+ read_msi_msg(irq, &msg);
+
+ msg.data &= ~MSI_DATA_VECTOR_MASK;
+ msg.data |= MSI_DATA_VECTOR(vector);
+ msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
+ msg.address_lo |= MSI_ADDR_DEST_ID(dest);
+
+ write_msi_msg(irq, &msg);
+ msix_flush_writes(irq);
+ set_native_irq_info(irq, mask);
+}
+#endif /* CONFIG_SMP */
+
+/*
+ * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
+ * which implement the MSI or MSI-X Capability Structure.
+ */
+static struct irq_chip msi_chip = {
+ .name = "PCI-MSI",
+ .enable = enable_msi_irq,
+ .disable = disable_msi_irq,
+ .unmask = unmask_msi_irq,
+ .mask = mask_msi_irq,
+ .ack = ack_apic_edge,
+#ifdef CONFIG_SMP
+ .set_affinity = set_msi_irq_affinity,
+#endif
+ .retrigger = ioapic_retrigger_irq,
+};
+
+int arch_setup_msi_irq(unsigned int irq, struct pci_dev *dev)
+{
+ struct msi_msg msg;
+ int ret;
+ ret = msi_compose_msg(dev, irq, &msg);
+ if (ret < 0)
+ return ret;
+
+ write_msi_msg(irq, &msg);
+
+ set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge");
+
+ return 0;
+}
+
+void arch_teardown_msi_irq(unsigned int irq)
+{
+ return;
+}
+
+#endif /* CONFIG_PCI_MSI */
+
+/*
+ * Hypertransport interrupt support
+ */
+#ifdef CONFIG_HT_IRQ
+
+#ifdef CONFIG_SMP
+
+static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector)
+{
+ struct ht_irq_msg msg;
+ fetch_ht_irq_msg(irq, &msg);
+
+ msg.address_lo &= ~(HT_IRQ_LOW_VECTOR_MASK | HT_IRQ_LOW_DEST_ID_MASK);
+ msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK);
+
+ msg.address_lo |= HT_IRQ_LOW_VECTOR(vector) | HT_IRQ_LOW_DEST_ID(dest);
+ msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest);
+
+ write_ht_irq_msg(irq, &msg);
+}
+
+static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask)
+{
+ unsigned int dest;
+ cpumask_t tmp;
+ int vector;
+
+ cpus_and(tmp, mask, cpu_online_map);
+ if (cpus_empty(tmp))
+ tmp = TARGET_CPUS;
+
+ cpus_and(mask, tmp, CPU_MASK_ALL);
+
+ vector = assign_irq_vector(irq, mask, &tmp);
+ if (vector < 0)
+ return;
+
+ dest = cpu_mask_to_apicid(tmp);
+
+ target_ht_irq(irq, dest, vector);
+ set_native_irq_info(irq, mask);
+}
+#endif
+
+static struct irq_chip ht_irq_chip = {
+ .name = "PCI-HT",
+ .mask = mask_ht_irq,
+ .unmask = unmask_ht_irq,
+ .ack = ack_apic_edge,
+#ifdef CONFIG_SMP
+ .set_affinity = set_ht_irq_affinity,
+#endif
+ .retrigger = ioapic_retrigger_irq,
+};
+
+int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
+{
+ int vector;
+ cpumask_t tmp;
+
+ vector = assign_irq_vector(irq, TARGET_CPUS, &tmp);
+ if (vector >= 0) {
+ struct ht_irq_msg msg;
+ unsigned dest;
+
+ dest = cpu_mask_to_apicid(tmp);
+
+ msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest);
+
+ msg.address_lo =
+ HT_IRQ_LOW_BASE |
+ HT_IRQ_LOW_DEST_ID(dest) |
+ HT_IRQ_LOW_VECTOR(vector) |
+ ((INT_DEST_MODE == 0) ?
+ HT_IRQ_LOW_DM_PHYSICAL :
+ HT_IRQ_LOW_DM_LOGICAL) |
+ HT_IRQ_LOW_RQEOI_EDGE |
+ ((INT_DELIVERY_MODE != dest_LowestPrio) ?
+ HT_IRQ_LOW_MT_FIXED :
+ HT_IRQ_LOW_MT_ARBITRATED) |
+ HT_IRQ_LOW_IRQ_MASKED;
+
+ write_ht_irq_msg(irq, &msg);
+
+ set_irq_chip_and_handler_name(irq, &ht_irq_chip,
+ handle_edge_irq, "edge");
+ }
+ return vector;
+}
+#endif /* CONFIG_HT_IRQ */
+
+/* --------------------------------------------------------------------------
+ ACPI-based IOAPIC Configuration
+ -------------------------------------------------------------------------- */
+
+#ifdef CONFIG_ACPI
+
+#define IO_APIC_MAX_ID 0xFE
int __init io_apic_get_redir_entries (int ioapic)
{
{
struct IO_APIC_route_entry entry;
unsigned long flags;
+ int vector;
+ cpumask_t mask;
if (!IO_APIC_IRQ(irq)) {
apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
return -EINVAL;
}
+ /*
+ * IRQs < 16 are already in the irq_2_pin[] map
+ */
+ if (irq >= 16)
+ add_pin_to_irq(irq, ioapic, pin);
+
+
+ vector = assign_irq_vector(irq, TARGET_CPUS, &mask);
+ if (vector < 0)
+ return vector;
+
/*
* Generate a PCI IRQ routing entry and program the IOAPIC accordingly.
* Note that we mask (disable) IRQs now -- these get enabled when the
entry.delivery_mode = INT_DELIVERY_MODE;
entry.dest_mode = INT_DEST_MODE;
- entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
+ entry.dest = cpu_mask_to_apicid(mask);
entry.trigger = triggering;
entry.polarity = polarity;
entry.mask = 1; /* Disabled (masked) */
-
- irq = gsi_irq_sharing(irq);
- /*
- * IRQs < 16 are already in the irq_2_pin[] map
- */
- if (irq >= 16)
- add_pin_to_irq(irq, ioapic, pin);
-
- entry.vector = assign_irq_vector(irq);
+ entry.vector = vector & 0xff;
apic_printk(APIC_VERBOSE,KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry (%d-%d -> 0x%x -> "
"IRQ %d Mode:%i Active:%i)\n", ioapic,
if (!ioapic && (irq < 16))
disable_8259A_irq(irq);
+ ioapic_write_entry(ioapic, pin, entry);
+
spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(ioapic, 0x11+2*pin, *(((int *)&entry)+1));
- io_apic_write(ioapic, 0x10+2*pin, *(((int *)&entry)+0));
- set_native_irq_info(use_pci_vector() ? entry.vector : irq, TARGET_CPUS);
+ set_native_irq_info(irq, TARGET_CPUS);
spin_unlock_irqrestore(&ioapic_lock, flags);
return 0;
if (irq_entry == -1)
continue;
irq = pin_2_irq(irq_entry, ioapic, pin);
- set_ioapic_affinity_irq(irq, TARGET_CPUS);
+
+ /* setup_IO_APIC_irqs could fail to get vector for some device
+ * when you have too many devices, because at that time only boot
+ * cpu is online.
+ */
+ if(!irq_vector[irq])
+ setup_IO_APIC_irq(ioapic, pin, irq_entry, irq);
+ else
+ set_ioapic_affinity_irq(irq, TARGET_CPUS);
}
}