*/
#include <linux/mm.h>
-#include <linux/irq.h>
#include <linux/init.h>
#include <linux/delay.h>
-#include <linux/config.h>
#include <linux/bootmem.h>
#include <linux/smp_lock.h>
#include <linux/kernel_stat.h>
#include <linux/mc146818rtc.h>
#include <linux/acpi.h>
+#include <linux/module.h>
#include <asm/smp.h>
#include <asm/mtrr.h>
#include <asm/pgalloc.h>
#include <asm/io_apic.h>
#include <asm/proto.h>
+#include <asm/acpi.h>
/* Have we found an MP table */
int smp_found_config;
unsigned int __initdata maxcpus = NR_CPUS;
-int acpi_found_madt;
-
/*
* Various Linux-internal data structures created from the
* MP-table.
*/
-int apic_version [MAX_APICS];
-unsigned char mp_bus_id_to_type [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 };
+DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 };
-cpumask_t pci_bus_to_cpumask [256] = { [0 ... 255] = CPU_MASK_ALL };
-int mp_current_pci_id = 0;
+static int mp_current_pci_id = 0;
/* I/O APIC entries */
struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
int mp_irq_entries;
int nr_ioapics;
-int pic_mode;
unsigned long mp_lapic_addr = 0;
/* Processor that is doing the boot up */
unsigned int boot_cpu_id = -1U;
/* Internal processor count */
-static unsigned int num_processors = 0;
+unsigned int num_processors __initdata = 0;
+
+unsigned disabled_cpus __initdata;
/* Bitmask of physically existing CPUs */
physid_mask_t phys_cpu_present_map = PHYSID_MASK_NONE;
-/* ACPI MADT entry parsing functions */
-#ifdef CONFIG_ACPI_BOOT
-extern struct acpi_boot_flags acpi_boot;
-#ifdef CONFIG_X86_LOCAL_APIC
-extern int acpi_parse_lapic (acpi_table_entry_header *header);
-extern int acpi_parse_lapic_addr_ovr (acpi_table_entry_header *header);
-extern int acpi_parse_lapic_nmi (acpi_table_entry_header *header);
-#endif /*CONFIG_X86_LOCAL_APIC*/
-#ifdef CONFIG_X86_IO_APIC
-extern int acpi_parse_ioapic (acpi_table_entry_header *header);
-#endif /*CONFIG_X86_IO_APIC*/
-#endif /*CONFIG_ACPI_BOOT*/
-
u8 bios_cpu_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID };
return sum & 0xFF;
}
-static void __init MP_processor_info (struct mpc_config_processor *m)
+static void __cpuinit MP_processor_info (struct mpc_config_processor *m)
{
- int ver;
+#ifndef CONFIG_XEN
+ int cpu;
+ cpumask_t tmp_map;
+ char *bootup_cpu = "";
- if (!(m->mpc_cpuflag & CPU_ENABLED))
+ if (!(m->mpc_cpuflag & CPU_ENABLED)) {
+ disabled_cpus++;
return;
-
- printk(KERN_INFO "Processor #%d %d:%d APIC version %d\n",
- m->mpc_apicid,
- (m->mpc_cpufeature & CPU_FAMILY_MASK)>>8,
- (m->mpc_cpufeature & CPU_MODEL_MASK)>>4,
- m->mpc_apicver);
-
+ }
if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
- Dprintk(" Bootup CPU\n");
+ bootup_cpu = " (Bootup-CPU)";
boot_cpu_id = m->mpc_apicid;
}
+
+ printk(KERN_INFO "Processor #%d%s\n", m->mpc_apicid, bootup_cpu);
+
if (num_processors >= NR_CPUS) {
printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
" Processor ignored.\n", NR_CPUS);
return;
}
- if (num_processors >= maxcpus) {
- printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
- " Processor ignored.\n", maxcpus);
- return;
- }
-
+#endif /* !CONFIG_XEN */
num_processors++;
-
- if (m->mpc_apicid > MAX_APICS) {
- printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n",
- m->mpc_apicid, MAX_APICS);
- return;
- }
- ver = m->mpc_apicver;
+#ifndef CONFIG_XEN
+ cpus_complement(tmp_map, cpu_present_map);
+ cpu = first_cpu(tmp_map);
physid_set(m->mpc_apicid, phys_cpu_present_map);
- /*
- * Validate version
- */
- if (ver == 0x0) {
- printk(KERN_ERR "BIOS bug, APIC version is 0 for CPU#%d! fixing up to 0x10. (tell your hw vendor)\n", m->mpc_apicid);
- ver = 0x10;
- }
- apic_version[m->mpc_apicid] = ver;
- bios_cpu_apicid[num_processors - 1] = m->mpc_apicid;
+ if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
+ /*
+ * bios_cpu_apicid is required to have processors listed
+ * in same order as logical cpu numbers. Hence the first
+ * entry is BSP, and so on.
+ */
+ cpu = 0;
+ }
+ bios_cpu_apicid[cpu] = m->mpc_apicid;
+ x86_cpu_to_apicid[cpu] = m->mpc_apicid;
+
+ cpu_set(cpu, cpu_possible_map);
+ cpu_set(cpu, cpu_present_map);
+#endif /* CONFIG_XEN */
}
static void __init MP_bus_info (struct mpc_config_bus *m)
Dprintk("Bus #%d is %s\n", m->mpc_busid, str);
if (strncmp(str, "ISA", 3) == 0) {
- mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA;
- } else if (strncmp(str, "EISA", 4) == 0) {
- mp_bus_id_to_type[m->mpc_busid] = MP_BUS_EISA;
+ set_bit(m->mpc_busid, mp_bus_not_pci);
} else if (strncmp(str, "PCI", 3) == 0) {
- mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI;
+ clear_bit(m->mpc_busid, mp_bus_not_pci);
mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id;
mp_current_pci_id++;
- } else if (strncmp(str, "MCA", 3) == 0) {
- mp_bus_id_to_type[m->mpc_busid] = MP_BUS_MCA;
} else {
printk(KERN_ERR "Unknown bustype %s\n", str);
}
}
+static int bad_ioapic(unsigned long address)
+{
+ if (nr_ioapics >= MAX_IO_APICS) {
+ printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
+ "(found %d)\n", MAX_IO_APICS, nr_ioapics);
+ panic("Recompile kernel with bigger MAX_IO_APICS!\n");
+ }
+ if (!address) {
+ printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
+ " found in table, skipping!\n");
+ return 1;
+ }
+ return 0;
+}
+
static void __init MP_ioapic_info (struct mpc_config_ioapic *m)
{
if (!(m->mpc_flags & MPC_APIC_USABLE))
return;
- printk("I/O APIC #%d Version %d at 0x%X.\n",
- m->mpc_apicid, m->mpc_apicver, m->mpc_apicaddr);
- if (nr_ioapics >= MAX_IO_APICS) {
- printk(KERN_ERR "Max # of I/O APICs (%d) exceeded (found %d).\n",
- MAX_IO_APICS, nr_ioapics);
- panic("Recompile kernel with bigger MAX_IO_APICS!.\n");
- }
- if (!m->mpc_apicaddr) {
- printk(KERN_ERR "WARNING: bogus zero I/O APIC address"
- " found in MP table, skipping!\n");
+ printk("I/O APIC #%d at 0x%X.\n",
+ m->mpc_apicid, m->mpc_apicaddr);
+
+ if (bad_ioapic(m->mpc_apicaddr))
return;
- }
+
mp_ioapics[nr_ioapics] = *m;
nr_ioapics++;
}
m->mpc_irqtype, m->mpc_irqflag & 3,
(m->mpc_irqflag >> 2) & 3, m->mpc_srcbus,
m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq);
- if (++mp_irq_entries == MAX_IRQ_SOURCES)
+ if (++mp_irq_entries >= MAX_IRQ_SOURCES)
panic("Max # of irq sources exceeded!!\n");
}
m->mpc_irqtype, m->mpc_irqflag & 3,
(m->mpc_irqflag >> 2) &3, m->mpc_srcbusid,
m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
- /*
- * Well it seems all SMP boards in existence
- * use ExtINT/LVT1 == LINT0 and
- * NMI/LVT2 == LINT1 - the following check
- * will show us if this assumptions is false.
- * Until then we do not have to add baggage.
- */
- if ((m->mpc_irqtype == mp_ExtINT) &&
- (m->mpc_destapiclint != 0))
- BUG();
- if ((m->mpc_irqtype == mp_NMI) &&
- (m->mpc_destapiclint != 1))
- BUG();
}
/*
unsigned char *mpt=((unsigned char *)mpc)+count;
if (memcmp(mpc->mpc_signature,MPC_SIGNATURE,4)) {
- printk("SMP mptable: bad signature [%c%c%c%c]!\n",
+ printk("MPTABLE: bad signature [%c%c%c%c]!\n",
mpc->mpc_signature[0],
mpc->mpc_signature[1],
mpc->mpc_signature[2],
return 0;
}
if (mpf_checksum((unsigned char *)mpc,mpc->mpc_length)) {
- printk("SMP mptable: checksum error!\n");
+ printk("MPTABLE: checksum error!\n");
return 0;
}
if (mpc->mpc_spec!=0x01 && mpc->mpc_spec!=0x04) {
- printk(KERN_ERR "SMP mptable: bad table version (%d)!!\n",
+ printk(KERN_ERR "MPTABLE: bad table version (%d)!!\n",
mpc->mpc_spec);
return 0;
}
if (!mpc->mpc_lapic) {
- printk(KERN_ERR "SMP mptable: null local APIC address!\n");
+ printk(KERN_ERR "MPTABLE: null local APIC address!\n");
return 0;
}
memcpy(str,mpc->mpc_oem,8);
- str[8]=0;
- printk(KERN_INFO "OEM ID: %s ",str);
+ str[8] = 0;
+ printk(KERN_INFO "MPTABLE: OEM ID: %s ",str);
memcpy(str,mpc->mpc_productid,12);
- str[12]=0;
- printk(KERN_INFO "Product ID: %s ",str);
+ str[12] = 0;
+ printk("MPTABLE: Product ID: %s ",str);
- printk(KERN_INFO "APIC at: 0x%X\n",mpc->mpc_lapic);
+ printk("MPTABLE: APIC at: 0x%X\n",mpc->mpc_lapic);
/* save the local APIC address, it might be non-default */
if (!acpi_lapic)
- mp_lapic_addr = mpc->mpc_lapic;
+ mp_lapic_addr = mpc->mpc_lapic;
/*
* Now process the configuration blocks.
struct mpc_config_processor *m=
(struct mpc_config_processor *)mpt;
if (!acpi_lapic)
- MP_processor_info(m);
+ MP_processor_info(m);
mpt += sizeof(*m);
count += sizeof(*m);
break;
struct mpc_config_ioapic *m=
(struct mpc_config_ioapic *)mpt;
MP_ioapic_info(m);
- mpt+=sizeof(*m);
- count+=sizeof(*m);
+ mpt += sizeof(*m);
+ count += sizeof(*m);
break;
}
case MP_INTSRC:
(struct mpc_config_intsrc *)mpt;
MP_intsrc_info(m);
- mpt+=sizeof(*m);
- count+=sizeof(*m);
+ mpt += sizeof(*m);
+ count += sizeof(*m);
break;
}
case MP_LINTSRC:
struct mpc_config_lintsrc *m=
(struct mpc_config_lintsrc *)mpt;
MP_lintsrc_info(m);
- mpt+=sizeof(*m);
- count+=sizeof(*m);
+ mpt += sizeof(*m);
+ count += sizeof(*m);
break;
}
}
}
+ clustered_apic_check();
if (!num_processors)
- printk(KERN_ERR "SMP mptable: no processors registered!\n");
+ printk(KERN_ERR "MPTABLE: no processors registered!\n");
return num_processors;
}
* 2 CPUs, numbered 0 & 1.
*/
processor.mpc_type = MP_PROCESSOR;
- /* Either an integrated APIC or a discrete 82489DX. */
- processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
+ processor.mpc_apicver = 0;
processor.mpc_cpuflag = CPU_ENABLED;
- processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) |
- (boot_cpu_data.x86_model << 4) |
- boot_cpu_data.x86_mask;
- processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
+ processor.mpc_cpufeature = 0;
+ processor.mpc_featureflag = 0;
processor.mpc_reserved[0] = 0;
processor.mpc_reserved[1] = 0;
for (i = 0; i < 2; i++) {
case 5:
memcpy(bus.mpc_bustype, "ISA ", 6);
break;
- case 2:
- case 6:
- case 3:
- memcpy(bus.mpc_bustype, "EISA ", 6);
- break;
- case 4:
- case 7:
- memcpy(bus.mpc_bustype, "MCA ", 6);
}
MP_bus_info(&bus);
if (mpc_default_type > 4) {
ioapic.mpc_type = MP_IOAPIC;
ioapic.mpc_apicid = 2;
- ioapic.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
+ ioapic.mpc_apicver = 0;
ioapic.mpc_flags = MPC_APIC_USABLE;
ioapic.mpc_apicaddr = 0xFEC00000;
MP_ioapic_info(&ioapic);
struct intel_mp_floating *mpf = mpf_found;
/*
- * ACPI may be used to obtain the entire SMP configuration or just to
- * enumerate/configure processors (CONFIG_ACPI_BOOT). Note that
* ACPI supports both logical (e.g. Hyper-Threading) and physical
* processors, where MPS only supports physical.
*/
printk(KERN_INFO "Using ACPI for processor (LAPIC) configuration information\n");
printk("Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification);
- if (mpf->mpf_feature2 & (1<<7)) {
- printk(KERN_INFO " IMCR and PIC compatibility mode.\n");
- pic_mode = 1;
- } else {
- printk(KERN_INFO " Virtual Wire compatibility mode.\n");
- pic_mode = 0;
- }
/*
* Now see if we need to read further.
* Read the physical hardware table. Anything here will
* override the defaults.
*/
- if (!smp_read_mpc((void *)(unsigned long)mpf->mpf_physptr)) {
+#ifdef CONFIG_XEN
+ if (!smp_read_mpc(isa_bus_to_virt(mpf->mpf_physptr))) {
+#else
+ if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr))) {
+#endif
smp_found_config = 0;
printk(KERN_ERR "BIOS bug, MP table errors detected!...\n");
printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n");
static int __init smp_scan_config (unsigned long base, unsigned long length)
{
extern void __bad_mpf_size(void);
+#ifdef CONFIG_XEN
+ unsigned int *bp = isa_bus_to_virt(base);
+#else
unsigned int *bp = phys_to_virt(base);
+#endif
+
struct intel_mp_floating *mpf;
- static int printed __initdata;
Dprintk("Scan SMP from %p for %ld bytes.\n", bp,length);
if (sizeof(*mpf) != 16)
|| (mpf->mpf_specification == 4)) ) {
smp_found_config = 1;
+#ifndef CONFIG_XEN
reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE);
if (mpf->mpf_physptr)
reserve_bootmem_generic(mpf->mpf_physptr, PAGE_SIZE);
+#endif
mpf_found = mpf;
return 1;
}
bp += 4;
length -= 16;
}
- if (!printed) {
- printk(KERN_INFO "No mptable found.\n");
- printed = 1;
- }
return 0;
}
-void __init find_intel_smp (void)
+void __init find_smp_config(void)
{
unsigned int address;
smp_scan_config(0xF0000,0x10000))
return;
/*
- * If it is an SMP machine we should know now, unless the
- * configuration is in an EISA/MCA bus machine with an
- * extended bios data area.
+ * If it is an SMP machine we should know now.
*
* there is a real-mode segmented pointer pointing to the
* 4K EBDA area at 0x40E, calculate and scan it here.
address = *(unsigned short *)phys_to_virt(0x40E);
address <<= 4;
- smp_scan_config(address, 0x1000);
-}
+ if (smp_scan_config(address, 0x1000))
+ return;
-/*
- * - Intel MP Configuration Table
- */
-void __init find_smp_config (void)
-{
-#ifdef CONFIG_X86_LOCAL_APIC
- find_intel_smp();
-#endif
+ /* If we have come this far, we did not find an MP table */
+ printk(KERN_INFO "No mptable found.\n");
}
-
/* --------------------------------------------------------------------------
ACPI-based MP Configuration
-------------------------------------------------------------------------- */
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
-void __init mp_register_lapic_address (
- u64 address)
+void __init mp_register_lapic_address(u64 address)
{
+#ifndef CONFIG_XEN
mp_lapic_addr = (unsigned long) address;
-
set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
-
if (boot_cpu_id == -1U)
boot_cpu_id = GET_APIC_ID(apic_read(APIC_ID));
-
- Dprintk("Boot CPU = %d\n", boot_cpu_physical_apicid);
+#endif
}
-
-void __init mp_register_lapic (
- u8 id,
- u8 enabled)
+void __cpuinit mp_register_lapic (u8 id, u8 enabled)
{
struct mpc_config_processor processor;
int boot_cpu = 0;
- if (id >= MAX_APICS) {
- printk(KERN_WARNING "Processor #%d invalid (max %d)\n",
- id, MAX_APICS);
- return;
- }
-
- if (id == boot_cpu_physical_apicid)
+ if (id == boot_cpu_id)
boot_cpu = 1;
+#ifndef CONFIG_XEN
processor.mpc_type = MP_PROCESSOR;
processor.mpc_apicid = id;
- processor.mpc_apicver = 0x10; /* TBD: lapic version */
+ processor.mpc_apicver = 0;
processor.mpc_cpuflag = (enabled ? CPU_ENABLED : 0);
processor.mpc_cpuflag |= (boot_cpu ? CPU_BOOTPROCESSOR : 0);
- processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) |
- (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask;
- processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
+ processor.mpc_cpufeature = 0;
+ processor.mpc_featureflag = 0;
processor.mpc_reserved[0] = 0;
processor.mpc_reserved[1] = 0;
+#endif
MP_processor_info(&processor);
}
-#ifdef CONFIG_X86_IO_APIC
-
#define MP_ISA_BUS 0
#define MP_MAX_IOAPIC_PIN 127
-struct mp_ioapic_routing {
+static struct mp_ioapic_routing {
int apic_id;
int gsi_start;
int gsi_end;
u32 pin_programmed[4];
} mp_ioapic_routing[MAX_IO_APICS];
-
-static int mp_find_ioapic (
- int gsi)
+static int mp_find_ioapic(int gsi)
{
- int i = 0;
+ int i = 0;
/* Find the IOAPIC that manages this GSI. */
for (i = 0; i < nr_ioapics; i++) {
}
printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
-
return -1;
}
-
-void __init mp_register_ioapic (
- u8 id,
- u32 address,
- u32 gsi_base)
+void __init mp_register_ioapic(u8 id, u32 address, u32 gsi_base)
{
- int idx = 0;
+ int idx = 0;
- if (nr_ioapics >= MAX_IO_APICS) {
- printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
- "(found %d)\n", MAX_IO_APICS, nr_ioapics);
- panic("Recompile kernel with bigger MAX_IO_APICS!\n");
- }
- if (!address) {
- printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
- " found in MADT table, skipping!\n");
+ if (bad_ioapic(address))
return;
- }
idx = nr_ioapics++;
mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE;
mp_ioapics[idx].mpc_apicaddr = address;
+#ifndef CONFIG_XEN
set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
- mp_ioapics[idx].mpc_apicid = io_apic_get_unique_id(idx, id);
- mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx);
+#endif
+ mp_ioapics[idx].mpc_apicid = id;
+ mp_ioapics[idx].mpc_apicver = 0;
/*
* Build basic IRQ lookup table to facilitate gsi->io_apic lookups
mp_ioapic_routing[idx].gsi_end = gsi_base +
io_apic_get_redir_entries(idx);
- printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
+ printk(KERN_INFO "IOAPIC[%d]: apic_id %d, address 0x%x, "
"GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid,
- mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr,
+ mp_ioapics[idx].mpc_apicaddr,
mp_ioapic_routing[idx].gsi_start,
mp_ioapic_routing[idx].gsi_end);
-
- return;
}
-
-void __init mp_override_legacy_irq (
- u8 bus_irq,
- u8 polarity,
- u8 trigger,
- u32 gsi)
+void __init
+mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
{
struct mpc_config_intsrc intsrc;
int ioapic = -1;
mp_irqs[mp_irq_entries] = intsrc;
if (++mp_irq_entries == MAX_IRQ_SOURCES)
panic("Max # of irq sources exceeded!\n");
-
- return;
}
-
-void __init mp_config_acpi_legacy_irqs (void)
+void __init mp_config_acpi_legacy_irqs(void)
{
struct mpc_config_intsrc intsrc;
- int i = 0;
- int ioapic = -1;
+ int i = 0;
+ int ioapic = -1;
/*
* Fabricate the legacy ISA bus (bus #31).
*/
- mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
- Dprintk("Bus #%d is ISA\n", MP_ISA_BUS);
+ set_bit(MP_ISA_BUS, mp_bus_not_pci);
/*
* Locate the IOAPIC that manages the ISA IRQs (0-15).
if (++mp_irq_entries == MAX_IRQ_SOURCES)
panic("Max # of irq sources exceeded!\n");
}
-
- return;
}
-void mp_register_gsi (u32 gsi, int edge_level, int active_high_low)
+int mp_register_gsi(u32 gsi, int triggering, int polarity)
{
- int ioapic = -1;
- int ioapic_pin = 0;
- int idx, bit = 0;
+ int ioapic = -1;
+ int ioapic_pin = 0;
+ int idx, bit = 0;
if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
- return;
+ return gsi;
-#ifdef CONFIG_ACPI_BUS
/* Don't set up the ACPI SCI because it's already set up */
if (acpi_fadt.sci_int == gsi)
- return;
-#endif
+ return gsi;
ioapic = mp_find_ioapic(gsi);
if (ioapic < 0) {
printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi);
- return;
+ return gsi;
}
ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_start;
printk(KERN_ERR "Invalid reference to IOAPIC pin "
"%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
ioapic_pin);
- return;
+ return gsi;
}
if ((1<<bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) {
Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
- return;
+ return gsi;
}
mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit);
io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
- edge_level == ACPI_EDGE_SENSITIVE ? 0 : 1,
- active_high_low == ACPI_ACTIVE_HIGH ? 0 : 1);
+ triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
+ polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+ return gsi;
}
-
-#endif /*CONFIG_X86_IO_APIC*/
-#endif /*CONFIG_ACPI_BOOT*/
+#endif /*CONFIG_ACPI*/