#include <linux/config.h>
#include <linux/mm.h>
-#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/bootmem.h>
#include <linux/smp_lock.h>
#include <linux/module.h>
#include <linux/sysdev.h>
#include <linux/nmi.h>
+#include <linux/sysctl.h>
+#include <linux/kprobes.h>
#include <asm/smp.h>
#include <asm/mtrr.h>
#include <asm/msr.h>
#include <asm/proto.h>
#include <asm/kdebug.h>
+#include <asm/local.h>
+#include <asm/mce.h>
/*
* lapic_nmi_owner tracks the ownership of the lapic NMI hardware:
* This is maintained separately from nmi_active because the NMI
* watchdog may also be driven from the I/O APIC timer.
*/
-static spinlock_t lapic_nmi_owner_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(lapic_nmi_owner_lock);
static unsigned int lapic_nmi_owner;
#define LAPIC_NMI_WATCHDOG (1<<0)
#define LAPIC_NMI_RESERVED (1<<1)
* -1: the lapic NMI watchdog is disabled, but can be enabled
*/
int nmi_active; /* oprofile uses this */
-static int panic_on_timeout;
+int panic_on_timeout;
unsigned int nmi_watchdog = NMI_DEFAULT;
static unsigned int nmi_hz = HZ;
-unsigned int nmi_perfctr_msr; /* the MSR to reset in NMI handler */
+static unsigned int nmi_perfctr_msr; /* the MSR to reset in NMI handler */
+static unsigned int nmi_p4_cccr_val;
/* Note that these events don't tick when the CPU idles. This means
the frequency varies with CPU load. */
#define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING 0x76
#define K7_NMI_EVENT K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING
-#define P6_EVNTSEL0_ENABLE (1 << 22)
-#define P6_EVNTSEL_INT (1 << 20)
-#define P6_EVNTSEL_OS (1 << 17)
-#define P6_EVNTSEL_USR (1 << 16)
-#define P6_EVENT_CPU_CLOCKS_NOT_HALTED 0x79
-#define P6_NMI_EVENT P6_EVENT_CPU_CLOCKS_NOT_HALTED
+#define MSR_P4_MISC_ENABLE 0x1A0
+#define MSR_P4_MISC_ENABLE_PERF_AVAIL (1<<7)
+#define MSR_P4_MISC_ENABLE_PEBS_UNAVAIL (1<<12)
+#define MSR_P4_PERFCTR0 0x300
+#define MSR_P4_CCCR0 0x360
+#define P4_ESCR_EVENT_SELECT(N) ((N)<<25)
+#define P4_ESCR_OS (1<<3)
+#define P4_ESCR_USR (1<<2)
+#define P4_CCCR_OVF_PMI0 (1<<26)
+#define P4_CCCR_OVF_PMI1 (1<<27)
+#define P4_CCCR_THRESHOLD(N) ((N)<<20)
+#define P4_CCCR_COMPLEMENT (1<<19)
+#define P4_CCCR_COMPARE (1<<18)
+#define P4_CCCR_REQUIRED (3<<16)
+#define P4_CCCR_ESCR_SELECT(N) ((N)<<13)
+#define P4_CCCR_ENABLE (1<<12)
+/* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter
+ CRU_ESCR0 (with any non-null event selector) through a complemented
+ max threshold. [IA32-Vol3, Section 14.9.9] */
+#define MSR_P4_IQ_COUNTER0 0x30C
+#define P4_NMI_CRU_ESCR0 (P4_ESCR_EVENT_SELECT(0x3F)|P4_ESCR_OS|P4_ESCR_USR)
+#define P4_NMI_IQ_CCCR0 \
+ (P4_CCCR_OVF_PMI0|P4_CCCR_THRESHOLD(15)|P4_CCCR_COMPLEMENT| \
+ P4_CCCR_COMPARE|P4_CCCR_REQUIRED|P4_CCCR_ESCR_SELECT(4)|P4_CCCR_ENABLE)
+
+static __cpuinit inline int nmi_known_cpu(void)
+{
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_AMD:
+ return boot_cpu_data.x86 == 15;
+ case X86_VENDOR_INTEL:
+ return boot_cpu_data.x86 == 15;
+ }
+ return 0;
+}
/* Run after command line and cpu_init init, but before all other checks */
-void __init nmi_watchdog_default(void)
+void __cpuinit nmi_watchdog_default(void)
{
if (nmi_watchdog != NMI_DEFAULT)
return;
-
- /* For some reason the IO APIC watchdog doesn't work on the AMD
- 8111 chipset. For now switch to local APIC mode using
- perfctr0 there. On Intel CPUs we don't have code to handle
- the perfctr and the IO-APIC seems to work, so use that. */
-
- if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) {
- nmi_watchdog = NMI_LOCAL_APIC;
- printk(KERN_INFO
- "Using local APIC NMI watchdog using perfctr0\n");
- } else {
- printk(KERN_INFO "Using IO APIC NMI watchdog\n");
+ if (nmi_known_cpu())
+ nmi_watchdog = NMI_LOCAL_APIC;
+ else
nmi_watchdog = NMI_IO_APIC;
- }
}
-/* Why is there no CPUID flag for this? */
-static __init int cpu_has_lapic(void)
+#ifdef CONFIG_SMP
+/* The performance counters used by NMI_LOCAL_APIC don't trigger when
+ * the CPU is idle. To make sure the NMI watchdog really ticks on all
+ * CPUs during the test make them busy.
+ */
+static __init void nmi_cpu_busy(void *data)
{
- switch (boot_cpu_data.x86_vendor) {
- case X86_VENDOR_INTEL:
- case X86_VENDOR_AMD:
- return boot_cpu_data.x86 >= 6;
- /* .... add more cpus here or find a different way to figure this out. */
- default:
- return 0;
- }
+ volatile int *endflag = data;
+ local_irq_enable();
+ /* Intentionally don't use cpu_relax here. This is
+ to make sure that the performance counter really ticks,
+ even if there is a simulator or similar that catches the
+ pause instruction. On a real HT machine this is fine because
+ all other CPUs are busy with "useless" delay loops and don't
+ care if they get somewhat less cycles. */
+ while (*endflag == 0)
+ barrier();
}
+#endif
int __init check_nmi_watchdog (void)
{
- int counts[NR_CPUS];
+ volatile int endflag = 0;
+ int *counts;
int cpu;
- if (nmi_watchdog == NMI_LOCAL_APIC && !cpu_has_lapic()) {
- nmi_watchdog = NMI_NONE;
- return -1;
- }
+ counts = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
+ if (!counts)
+ return -1;
printk(KERN_INFO "testing NMI watchdog ... ");
+#ifdef CONFIG_SMP
+ if (nmi_watchdog == NMI_LOCAL_APIC)
+ smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0);
+#endif
+
for (cpu = 0; cpu < NR_CPUS; cpu++)
- counts[cpu] = cpu_pda[cpu].__nmi_count;
+ counts[cpu] = cpu_pda(cpu)->__nmi_count;
local_irq_enable();
mdelay((10*1000)/nmi_hz); // wait 10 ticks
- for (cpu = 0; cpu < NR_CPUS; cpu++) {
- if (!cpu_online(cpu))
- continue;
- if (cpu_pda[cpu].__nmi_count - counts[cpu] <= 5) {
- printk("CPU#%d: NMI appears to be stuck (%d)!\n",
+ for_each_online_cpu(cpu) {
+ if (cpu_pda(cpu)->__nmi_count - counts[cpu] <= 5) {
+ endflag = 1;
+ printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n",
cpu,
- cpu_pda[cpu].__nmi_count);
+ counts[cpu],
+ cpu_pda(cpu)->__nmi_count);
nmi_active = 0;
lapic_nmi_owner &= ~LAPIC_NMI_WATCHDOG;
+ nmi_perfctr_msr = 0;
+ kfree(counts);
return -1;
}
}
+ endflag = 1;
printk("OK.\n");
/* now that we know it works we can reduce NMI frequency to
if (nmi_watchdog == NMI_LOCAL_APIC)
nmi_hz = 1;
+ kfree(counts);
return 0;
}
if (nmi >= NMI_INVALID)
return 0;
- nmi_watchdog = nmi;
+ nmi_watchdog = nmi;
return 1;
}
wrmsr(MSR_K7_EVNTSEL0, 0, 0);
break;
case X86_VENDOR_INTEL:
- wrmsr(MSR_IA32_EVNTSEL0, 0, 0);
+ if (boot_cpu_data.x86 == 15) {
+ wrmsr(MSR_P4_IQ_CCCR0, 0, 0);
+ wrmsr(MSR_P4_CRU_ESCR0, 0, 0);
+ }
break;
}
nmi_active = -1;
{
if (nmi_active < 0) {
nmi_watchdog = NMI_LOCAL_APIC;
+ touch_nmi_watchdog();
setup_apic_nmi_watchdog();
}
}
static int nmi_pm_active; /* nmi_active before suspend */
-static int lapic_nmi_suspend(struct sys_device *dev, u32 state)
+static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state)
{
nmi_pm_active = nmi_active;
disable_lapic_nmi_watchdog();
* Original code written by Keith Owens.
*/
+static void clear_msr_range(unsigned int base, unsigned int n)
+{
+ unsigned int i;
+
+ for(i = 0; i < n; ++i)
+ wrmsr(base+i, 0, 0);
+}
+
static void setup_k7_watchdog(void)
{
int i;
unsigned int evntsel;
- /* No check, so can start with slow frequency */
- nmi_hz = 1;
-
- /* XXX should check these in EFER */
-
nmi_perfctr_msr = MSR_K7_PERFCTR0;
for(i = 0; i < 4; ++i) {
/* Simulator may not support it */
- if (checking_wrmsrl(MSR_K7_EVNTSEL0+i, 0UL))
+ if (checking_wrmsrl(MSR_K7_EVNTSEL0+i, 0UL)) {
+ nmi_perfctr_msr = 0;
return;
+ }
wrmsrl(MSR_K7_PERFCTR0+i, 0UL);
}
| K7_NMI_EVENT;
wrmsr(MSR_K7_EVNTSEL0, evntsel, 0);
- wrmsrl(MSR_K7_PERFCTR0, -((u64)cpu_khz*1000) / nmi_hz);
+ wrmsrl(MSR_K7_PERFCTR0, -((u64)cpu_khz * 1000 / nmi_hz));
apic_write(APIC_LVTPC, APIC_DM_NMI);
evntsel |= K7_EVNTSEL_ENABLE;
wrmsr(MSR_K7_EVNTSEL0, evntsel, 0);
}
+
+static int setup_p4_watchdog(void)
+{
+ unsigned int misc_enable, dummy;
+
+ rdmsr(MSR_P4_MISC_ENABLE, misc_enable, dummy);
+ if (!(misc_enable & MSR_P4_MISC_ENABLE_PERF_AVAIL))
+ return 0;
+
+ nmi_perfctr_msr = MSR_P4_IQ_COUNTER0;
+ nmi_p4_cccr_val = P4_NMI_IQ_CCCR0;
+#ifdef CONFIG_SMP
+ if (smp_num_siblings == 2)
+ nmi_p4_cccr_val |= P4_CCCR_OVF_PMI1;
+#endif
+
+ if (!(misc_enable & MSR_P4_MISC_ENABLE_PEBS_UNAVAIL))
+ clear_msr_range(0x3F1, 2);
+ /* MSR 0x3F0 seems to have a default value of 0xFC00, but current
+ docs doesn't fully define it, so leave it alone for now. */
+ if (boot_cpu_data.x86_model >= 0x3) {
+ /* MSR_P4_IQ_ESCR0/1 (0x3ba/0x3bb) removed */
+ clear_msr_range(0x3A0, 26);
+ clear_msr_range(0x3BC, 3);
+ } else {
+ clear_msr_range(0x3A0, 31);
+ }
+ clear_msr_range(0x3C0, 6);
+ clear_msr_range(0x3C8, 6);
+ clear_msr_range(0x3E0, 2);
+ clear_msr_range(MSR_P4_CCCR0, 18);
+ clear_msr_range(MSR_P4_PERFCTR0, 18);
+
+ wrmsr(MSR_P4_CRU_ESCR0, P4_NMI_CRU_ESCR0, 0);
+ wrmsr(MSR_P4_IQ_CCCR0, P4_NMI_IQ_CCCR0 & ~P4_CCCR_ENABLE, 0);
+ Dprintk("setting P4_IQ_COUNTER0 to 0x%08lx\n", -(cpu_khz * 1000UL / nmi_hz));
+ wrmsrl(MSR_P4_IQ_COUNTER0, -((u64)cpu_khz * 1000 / nmi_hz));
+ apic_write(APIC_LVTPC, APIC_DM_NMI);
+ wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0);
+ return 1;
+}
+
void setup_apic_nmi_watchdog(void)
{
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_AMD:
- if (boot_cpu_data.x86 < 6)
+ if (boot_cpu_data.x86 != 15)
return;
if (strstr(boot_cpu_data.x86_model_id, "Screwdriver"))
return;
setup_k7_watchdog();
break;
+ case X86_VENDOR_INTEL:
+ if (boot_cpu_data.x86 != 15)
+ return;
+ if (!setup_p4_watchdog())
+ return;
+ break;
+
default:
return;
}
nmi_active = 1;
}
-static spinlock_t nmi_print_lock = SPIN_LOCK_UNLOCKED;
-
/*
* the best way to detect whether a CPU has a 'hard lockup' problem
* is to check it's local APIC timer IRQ counts. If they are not
*
* as these watchdog NMI IRQs are generated on every CPU, we only
* have to check the current processor.
- *
- * since NMIs don't listen to _any_ locks, we have to be extremely
- * careful not to rely on unsafe variables. The printk might lock
- * up though, so we have to break up any console locks first ...
- * [when there will be more tty-related locks, break them up
- * here too!]
*/
-static unsigned int
- last_irq_sums [NR_CPUS],
- alert_counter [NR_CPUS];
+static DEFINE_PER_CPU(unsigned, last_irq_sum);
+static DEFINE_PER_CPU(local_t, alert_counter);
+static DEFINE_PER_CPU(int, nmi_touch);
void touch_nmi_watchdog (void)
{
- int i;
+ if (nmi_watchdog > 0) {
+ unsigned cpu;
+
+ /*
+ * Tell other CPUs to reset their alert counters. We cannot
+ * do it ourselves because the alert count increase is not
+ * atomic.
+ */
+ for_each_present_cpu (cpu)
+ per_cpu(nmi_touch, cpu) = 1;
+ }
- /*
- * Just reset the alert counters, (other CPUs might be
- * spinning on locks we hold):
- */
- for (i = 0; i < NR_CPUS; i++)
- alert_counter[i] = 0;
+ touch_softlockup_watchdog();
}
-void nmi_watchdog_tick (struct pt_regs * regs, unsigned reason)
+void __kprobes nmi_watchdog_tick(struct pt_regs * regs, unsigned reason)
{
- int sum, cpu;
+ int sum;
+ int touched = 0;
- cpu = safe_smp_processor_id();
sum = read_pda(apic_timer_irqs);
- if (last_irq_sums[cpu] == sum) {
+ if (__get_cpu_var(nmi_touch)) {
+ __get_cpu_var(nmi_touch) = 0;
+ touched = 1;
+ }
+#ifdef CONFIG_X86_MCE
+ /* Could check oops_in_progress here too, but it's safer
+ not too */
+ if (atomic_read(&mce_entry) > 0)
+ touched = 1;
+#endif
+ if (!touched && __get_cpu_var(last_irq_sum) == sum) {
/*
* Ayiee, looks like this CPU is stuck ...
* wait a few IRQs (5 seconds) before doing the oops ...
*/
- alert_counter[cpu]++;
- if (alert_counter[cpu] == 5*nmi_hz) {
- if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_BAD) {
- alert_counter[cpu] = 0;
+ local_inc(&__get_cpu_var(alert_counter));
+ if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz) {
+ if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT)
+ == NOTIFY_STOP) {
+ local_set(&__get_cpu_var(alert_counter), 0);
return;
- }
- spin_lock(&nmi_print_lock);
- /*
- * We are in trouble anyway, lets at least try
- * to get a message out.
- */
- bust_spinlocks(1);
- printk("NMI Watchdog detected LOCKUP on CPU%d, registers:\n", cpu);
- show_registers(regs);
- if (panic_on_timeout || panic_on_oops)
- panic("nmi watchdog");
- printk("console shuts up ...\n");
- console_silent();
- spin_unlock(&nmi_print_lock);
- bust_spinlocks(0);
- do_exit(SIGSEGV);
+ }
+ die_nmi("NMI Watchdog detected LOCKUP on CPU %d\n", regs);
}
} else {
- last_irq_sums[cpu] = sum;
- alert_counter[cpu] = 0;
+ __get_cpu_var(last_irq_sum) = sum;
+ local_set(&__get_cpu_var(alert_counter), 0);
+ }
+ if (nmi_perfctr_msr) {
+ if (nmi_perfctr_msr == MSR_P4_IQ_COUNTER0) {
+ /*
+ * P4 quirks:
+ * - An overflown perfctr will assert its interrupt
+ * until the OVF flag in its CCCR is cleared.
+ * - LVTPC is masked on interrupt and must be
+ * unmasked by the LVTPC handler.
+ */
+ wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0);
+ apic_write(APIC_LVTPC, APIC_DM_NMI);
+ }
+ wrmsrl(nmi_perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz));
}
- if (nmi_perfctr_msr)
- wrmsr(nmi_perfctr_msr, -(cpu_khz/nmi_hz*1000), -1);
}
-static int dummy_nmi_callback(struct pt_regs * regs, int cpu)
+static __kprobes int dummy_nmi_callback(struct pt_regs * regs, int cpu)
{
return 0;
}
static nmi_callback_t nmi_callback = dummy_nmi_callback;
-asmlinkage void do_nmi(struct pt_regs * regs, long error_code)
+asmlinkage __kprobes void do_nmi(struct pt_regs * regs, long error_code)
{
int cpu = safe_smp_processor_id();
nmi_enter();
add_pda(__nmi_count,1);
- if (!nmi_callback(regs, cpu))
+ if (!rcu_dereference(nmi_callback)(regs, cpu))
default_do_nmi(regs);
nmi_exit();
}
void set_nmi_callback(nmi_callback_t callback)
{
- nmi_callback = callback;
+ vmalloc_sync_all();
+ rcu_assign_pointer(nmi_callback, callback);
}
void unset_nmi_callback(void)
nmi_callback = dummy_nmi_callback;
}
+#ifdef CONFIG_SYSCTL
+
+static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
+{
+ unsigned char reason = get_nmi_reason();
+ char buf[64];
+
+ if (!(reason & 0xc0)) {
+ sprintf(buf, "NMI received for unknown reason %02x\n", reason);
+ die_nmi(buf,regs);
+ }
+ return 0;
+}
+
+/*
+ * proc handler for /proc/sys/kernel/unknown_nmi_panic
+ */
+int proc_unknown_nmi_panic(struct ctl_table *table, int write, struct file *file,
+ void __user *buffer, size_t *length, loff_t *ppos)
+{
+ int old_state;
+
+ old_state = unknown_nmi_panic;
+ proc_dointvec(table, write, file, buffer, length, ppos);
+ if (!!old_state == !!unknown_nmi_panic)
+ return 0;
+
+ if (unknown_nmi_panic) {
+ if (reserve_lapic_nmi() < 0) {
+ unknown_nmi_panic = 0;
+ return -EBUSY;
+ } else {
+ set_nmi_callback(unknown_nmi_panic_callback);
+ }
+ } else {
+ release_lapic_nmi();
+ unset_nmi_callback();
+ }
+ return 0;
+}
+
+#endif
+
EXPORT_SYMBOL(nmi_active);
EXPORT_SYMBOL(nmi_watchdog);
EXPORT_SYMBOL(reserve_lapic_nmi);