#include <linux/bitmap.h>
#include <linux/module.h>
#include <linux/topology.h>
+#include <linux/bootmem.h>
+#include <linux/mm.h>
#include <asm/proto.h>
#include <asm/numa.h>
+#include <asm/e820.h>
+
+int acpi_numa __initdata;
static struct acpi_table_slit *acpi_slit;
static nodemask_t nodes_parsed __initdata;
-static nodemask_t nodes_found __initdata;
-static struct node nodes[MAX_NUMNODES] __initdata;
-static __u8 pxm2node[256] = { [0 ... 255] = 0xff };
+static struct bootnode nodes[MAX_NUMNODES] __initdata;
+static struct bootnode nodes_add[MAX_NUMNODES];
+static int found_add_area __initdata;
+int hotadd_percent __initdata = 0;
+
+/* Too small nodes confuse the VM badly. Usually they result
+ from BIOS bugs. */
+#define NODE_MIN_SIZE (4*1024*1024)
static __init int setup_node(int pxm)
{
- unsigned node = pxm2node[pxm];
- if (node == 0xff) {
- if (nodes_weight(nodes_found) >= MAX_NUMNODES)
- return -1;
- node = first_unset_node(nodes_found);
- node_set(node, nodes_found);
- pxm2node[pxm] = node;
- }
- return pxm2node[pxm];
+ return acpi_map_pxm_to_node(pxm);
}
static __init int conflicting_nodes(unsigned long start, unsigned long end)
{
int i;
- for_each_online_node(i) {
- struct node *nd = &nodes[i];
+ for_each_node_mask(i, nodes_parsed) {
+ struct bootnode *nd = &nodes[i];
if (nd->start == nd->end)
continue;
if (nd->end > start && nd->start < end)
- return 1;
+ return i;
if (nd->end == end && nd->start == start)
- return 1;
+ return i;
}
return -1;
}
static __init void cutoff_node(int i, unsigned long start, unsigned long end)
{
- struct node *nd = &nodes[i];
+ struct bootnode *nd = &nodes[i];
+
+ if (found_add_area)
+ return;
+
if (nd->start < start) {
nd->start = start;
if (nd->end < nd->start)
nd->start = nd->end;
}
if (nd->end > end) {
- if (!(end & 0xfff))
- end--;
nd->end = end;
if (nd->start > nd->end)
nd->start = nd->end;
static __init void bad_srat(void)
{
+ int i;
printk(KERN_ERR "SRAT: SRAT not used.\n");
acpi_numa = -1;
+ found_add_area = 0;
+ for (i = 0; i < MAX_LOCAL_APIC; i++)
+ apicid_to_node[i] = NUMA_NO_NODE;
+ for (i = 0; i < MAX_NUMNODES; i++)
+ nodes_add[i].start = nodes[i].end = 0;
+ remove_all_active_ranges();
}
static __init inline int srat_disabled(void)
return numa_off || acpi_numa < 0;
}
+/*
+ * A lot of BIOS fill in 10 (= no distance) everywhere. This messes
+ * up the NUMA heuristics which wants the local node to have a smaller
+ * distance than the others.
+ * Do some quick checks here and only use the SLIT if it passes.
+ */
+static __init int slit_valid(struct acpi_table_slit *slit)
+{
+ int i, j;
+ int d = slit->localities;
+ for (i = 0; i < d; i++) {
+ for (j = 0; j < d; j++) {
+ u8 val = slit->entry[d*i + j];
+ if (i == j) {
+ if (val != 10)
+ return 0;
+ } else if (val <= 10)
+ return 0;
+ }
+ }
+ return 1;
+}
+
/* Callback for SLIT parsing */
void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
{
+ if (!slit_valid(slit)) {
+ printk(KERN_INFO "ACPI: SLIT table looks invalid. Not used.\n");
+ return;
+ }
acpi_slit = slit;
}
acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa)
{
int pxm, node;
- if (srat_disabled() || pa->flags.enabled == 0)
+ if (srat_disabled())
+ return;
+ if (pa->header.length != sizeof(struct acpi_table_processor_affinity)) {
+ bad_srat();
+ return;
+ }
+ if (pa->flags.enabled == 0)
return;
pxm = pa->proximity_domain;
node = setup_node(pxm);
bad_srat();
return;
}
- if (pa->apic_id >= NR_CPUS) {
- printk(KERN_ERR "SRAT: lapic %u too large.\n",
- pa->apic_id);
- bad_srat();
- return;
- }
- cpu_to_node[pa->apic_id] = node;
+ apicid_to_node[pa->apic_id] = node;
acpi_numa = 1;
printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n",
pxm, pa->apic_id, node);
}
+#ifdef CONFIG_MEMORY_HOTPLUG_RESERVE
+/*
+ * Protect against too large hotadd areas that would fill up memory.
+ */
+static int hotadd_enough_memory(struct bootnode *nd)
+{
+ static unsigned long allocated;
+ static unsigned long last_area_end;
+ unsigned long pages = (nd->end - nd->start) >> PAGE_SHIFT;
+ long mem = pages * sizeof(struct page);
+ unsigned long addr;
+ unsigned long allowed;
+ unsigned long oldpages = pages;
+
+ if (mem < 0)
+ return 0;
+ allowed = (end_pfn - absent_pages_in_range(0, end_pfn)) * PAGE_SIZE;
+ allowed = (allowed / 100) * hotadd_percent;
+ if (allocated + mem > allowed) {
+ unsigned long range;
+ /* Give them at least part of their hotadd memory upto hotadd_percent
+ It would be better to spread the limit out
+ over multiple hotplug areas, but that is too complicated
+ right now */
+ if (allocated >= allowed)
+ return 0;
+ range = allowed - allocated;
+ pages = (range / PAGE_SIZE);
+ mem = pages * sizeof(struct page);
+ nd->end = nd->start + range;
+ }
+ /* Not completely fool proof, but a good sanity check */
+ addr = find_e820_area(last_area_end, end_pfn<<PAGE_SHIFT, mem);
+ if (addr == -1UL)
+ return 0;
+ if (pages != oldpages)
+ printk(KERN_NOTICE "SRAT: Hotadd area limited to %lu bytes\n",
+ pages << PAGE_SHIFT);
+ last_area_end = addr + mem;
+ allocated += mem;
+ return 1;
+}
+
+static int update_end_of_memory(unsigned long end)
+{
+ found_add_area = 1;
+ if ((end >> PAGE_SHIFT) > end_pfn)
+ end_pfn = end >> PAGE_SHIFT;
+ return 1;
+}
+
+static inline int save_add_info(void)
+{
+ return hotadd_percent > 0;
+}
+#else
+int update_end_of_memory(unsigned long end) {return -1;}
+static int hotadd_enough_memory(struct bootnode *nd) {return 1;}
+#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
+static inline int save_add_info(void) {return 1;}
+#else
+static inline int save_add_info(void) {return 0;}
+#endif
+#endif
+/*
+ * Update nodes_add and decide if to include add are in the zone.
+ * Both SPARSE and RESERVE need nodes_add infomation.
+ * This code supports one contigious hot add area per node.
+ */
+static int reserve_hotadd(int node, unsigned long start, unsigned long end)
+{
+ unsigned long s_pfn = start >> PAGE_SHIFT;
+ unsigned long e_pfn = end >> PAGE_SHIFT;
+ int ret = 0, changed = 0;
+ struct bootnode *nd = &nodes_add[node];
+
+ /* I had some trouble with strange memory hotadd regions breaking
+ the boot. Be very strict here and reject anything unexpected.
+ If you want working memory hotadd write correct SRATs.
+
+ The node size check is a basic sanity check to guard against
+ mistakes */
+ if ((signed long)(end - start) < NODE_MIN_SIZE) {
+ printk(KERN_ERR "SRAT: Hotplug area too small\n");
+ return -1;
+ }
+
+ /* This check might be a bit too strict, but I'm keeping it for now. */
+ if (absent_pages_in_range(s_pfn, e_pfn) != e_pfn - s_pfn) {
+ printk(KERN_ERR
+ "SRAT: Hotplug area %lu -> %lu has existing memory\n",
+ s_pfn, e_pfn);
+ return -1;
+ }
+
+ if (!hotadd_enough_memory(&nodes_add[node])) {
+ printk(KERN_ERR "SRAT: Hotplug area too large\n");
+ return -1;
+ }
+
+ /* Looks good */
+
+ if (nd->start == nd->end) {
+ nd->start = start;
+ nd->end = end;
+ changed = 1;
+ } else {
+ if (nd->start == end) {
+ nd->start = start;
+ changed = 1;
+ }
+ if (nd->end == start) {
+ nd->end = end;
+ changed = 1;
+ }
+ if (!changed)
+ printk(KERN_ERR "SRAT: Hotplug zone not continuous. Partly ignored\n");
+ }
+
+ ret = update_end_of_memory(nd->end);
+
+ if (changed)
+ printk(KERN_INFO "SRAT: hot plug zone found %Lx - %Lx\n", nd->start, nd->end);
+ return ret;
+}
+
/* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
void __init
acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma)
{
- struct node *nd;
+ struct bootnode *nd, oldnode;
unsigned long start, end;
int node, pxm;
int i;
- if (srat_disabled() || ma->flags.enabled == 0)
+ if (srat_disabled())
+ return;
+ if (ma->header.length != sizeof(struct acpi_table_memory_affinity)) {
+ bad_srat();
+ return;
+ }
+ if (ma->flags.enabled == 0)
return;
- /* hotplug bit is ignored for now */
+ if (ma->flags.hot_pluggable && !save_add_info())
+ return;
+ start = ma->base_addr_lo | ((u64)ma->base_addr_hi << 32);
+ end = start + (ma->length_lo | ((u64)ma->length_hi << 32));
pxm = ma->proximity_domain;
node = setup_node(pxm);
if (node < 0) {
bad_srat();
return;
}
- start = ma->base_addr_lo | ((u64)ma->base_addr_hi << 32);
- end = start + (ma->length_lo | ((u64)ma->length_hi << 32));
i = conflicting_nodes(start, end);
- if (i >= 0) {
+ if (i == node) {
+ printk(KERN_WARNING
+ "SRAT: Warning: PXM %d (%lx-%lx) overlaps with itself (%Lx-%Lx)\n",
+ pxm, start, end, nodes[i].start, nodes[i].end);
+ } else if (i >= 0) {
printk(KERN_ERR
- "SRAT: pxm %d overlap %lx-%lx with node %d(%Lx-%Lx)\n",
- pxm, start, end, i, nodes[i].start, nodes[i].end);
+ "SRAT: PXM %d (%lx-%lx) overlaps with PXM %d (%Lx-%Lx)\n",
+ pxm, start, end, node_to_pxm(i),
+ nodes[i].start, nodes[i].end);
bad_srat();
return;
}
nd = &nodes[node];
+ oldnode = *nd;
if (!node_test_and_set(node, nodes_parsed)) {
nd->start = start;
nd->end = end;
if (nd->end < end)
nd->end = end;
}
- if (!(nd->end & 0xfff))
- nd->end--;
+
printk(KERN_INFO "SRAT: Node %u PXM %u %Lx-%Lx\n", node, pxm,
nd->start, nd->end);
+ e820_register_active_regions(node, nd->start >> PAGE_SHIFT,
+ nd->end >> PAGE_SHIFT);
+ push_node_boundaries(node, nd->start >> PAGE_SHIFT,
+ nd->end >> PAGE_SHIFT);
+
+ if (ma->flags.hot_pluggable && (reserve_hotadd(node, start, end) < 0)) {
+ /* Ignore hotadd region. Undo damage */
+ printk(KERN_NOTICE "SRAT: Hotplug region ignored\n");
+ *nd = oldnode;
+ if ((nd->start | nd->end) == 0)
+ node_clear(node, nodes_parsed);
+ }
+}
+
+/* Sanity check to catch more bad SRATs (they are amazingly common).
+ Make sure the PXMs cover all memory. */
+static int nodes_cover_memory(void)
+{
+ int i;
+ unsigned long pxmram, e820ram;
+
+ pxmram = 0;
+ for_each_node_mask(i, nodes_parsed) {
+ unsigned long s = nodes[i].start >> PAGE_SHIFT;
+ unsigned long e = nodes[i].end >> PAGE_SHIFT;
+ pxmram += e - s;
+ pxmram -= absent_pages_in_range(s, e);
+ if ((long)pxmram < 0)
+ pxmram = 0;
+ }
+
+ e820ram = end_pfn - absent_pages_in_range(0, end_pfn);
+ /* We seem to lose 3 pages somewhere. Allow a bit of slack. */
+ if ((long)(e820ram - pxmram) >= 1*1024*1024) {
+ printk(KERN_ERR
+ "SRAT: PXMs only cover %luMB of your %luMB e820 RAM. Not used.\n",
+ (pxmram << PAGE_SHIFT) >> 20,
+ (e820ram << PAGE_SHIFT) >> 20);
+ return 0;
+ }
+ return 1;
+}
+
+static void unparse_node(int node)
+{
+ int i;
+ node_clear(node, nodes_parsed);
+ for (i = 0; i < MAX_LOCAL_APIC; i++) {
+ if (apicid_to_node[i] == node)
+ apicid_to_node[i] = NUMA_NO_NODE;
+ }
}
void __init acpi_numa_arch_fixup(void) {}
int __init acpi_scan_nodes(unsigned long start, unsigned long end)
{
int i;
+
+ /* First clean up the node list */
+ for (i = 0; i < MAX_NUMNODES; i++) {
+ cutoff_node(i, start, end);
+ if ((nodes[i].end - nodes[i].start) < NODE_MIN_SIZE) {
+ unparse_node(i);
+ node_set_offline(i);
+ }
+ }
+
if (acpi_numa <= 0)
return -1;
- memnode_shift = compute_hash_shift(nodes, nodes_weight(nodes_parsed));
+
+ if (!nodes_cover_memory()) {
+ bad_srat();
+ return -1;
+ }
+
+ memnode_shift = compute_hash_shift(nodes, MAX_NUMNODES);
if (memnode_shift < 0) {
printk(KERN_ERR
"SRAT: No NUMA node hash function found. Contact maintainer\n");
bad_srat();
return -1;
}
- for (i = 0; i < MAX_NUMNODES; i++) {
- if (!node_isset(i, nodes_parsed))
- continue;
- cutoff_node(i, start, end);
- if (nodes[i].start == nodes[i].end) {
- node_clear(i, nodes_parsed);
- continue;
- }
+
+ /* Finally register nodes */
+ for_each_node_mask(i, nodes_parsed)
setup_node_bootmem(i, nodes[i].start, nodes[i].end);
- }
+ /* Try again in case setup_node_bootmem missed one due
+ to missing bootmem */
+ for_each_node_mask(i, nodes_parsed)
+ if (!node_online(i))
+ setup_node_bootmem(i, nodes[i].start, nodes[i].end);
+
for (i = 0; i < NR_CPUS; i++) {
if (cpu_to_node[i] == NUMA_NO_NODE)
continue;
if (!node_isset(cpu_to_node[i], nodes_parsed))
- cpu_to_node[i] = NUMA_NO_NODE;
+ numa_set_node(i, NUMA_NO_NODE);
}
numa_init_array();
return 0;
}
-int node_to_pxm(int n)
+void __init srat_reserve_add_area(int nodeid)
{
- int i;
- if (pxm2node[n] == n)
- return n;
- for (i = 0; i < 256; i++)
- if (pxm2node[i] == n)
- return i;
- return 0;
+ if (found_add_area && nodes_add[nodeid].end) {
+ u64 total_mb;
+
+ printk(KERN_INFO "SRAT: Reserving hot-add memory space "
+ "for node %d at %Lx-%Lx\n",
+ nodeid, nodes_add[nodeid].start, nodes_add[nodeid].end);
+ total_mb = (nodes_add[nodeid].end - nodes_add[nodeid].start)
+ >> PAGE_SHIFT;
+ total_mb *= sizeof(struct page);
+ total_mb >>= 20;
+ printk(KERN_INFO "SRAT: This will cost you %Lu MB of "
+ "pre-allocated memory.\n", (unsigned long long)total_mb);
+ reserve_bootmem_node(NODE_DATA(nodeid), nodes_add[nodeid].start,
+ nodes_add[nodeid].end - nodes_add[nodeid].start);
+ }
}
int __node_distance(int a, int b)
}
EXPORT_SYMBOL(__node_distance);
+
+int memory_add_physaddr_to_nid(u64 start)
+{
+ int i, ret = 0;
+
+ for_each_node(i)
+ if (nodes_add[i].start <= start && nodes_add[i].end > start)
+ ret = i;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
+