# Builds MyPLC, either inside the MyPLC development environment in
# devel/root (if PLC_DEVEL_BOOTSTRAP is true), or in the current host
# environment (may be itself a MyPLC development environment or a
-# Fedora Core 4 environment with the appropriate development packages
+# Fedora environment with the appropriate development packages
# installed).
#
-# root.img (loopback image)
-# root/ (mount point)
-# data/ (various data files)
-# data/etc/planetlab/ (configuration files)
+# Marc E. Fiuczynski <mef@cs.princeton.edu>
+# Copyright (C) 2007 The Trustees of Princeton University
#
-# Mark Huang <mlhuang@cs.princeton.edu>
-# Copyright (C) 2006 The Trustees of Princeton University
-#
-# $Id: build.sh,v 1.23 2006/07/17 21:31:31 mlhuang Exp $
+# $Id$
#
. build.functions
-#
-# Build myplc inside myplc-devel. Infinite recursion is avoided only
-# if PLC_DEVEL_BOOTSTRAP is false in the default configuration file.
-#
-
-if [ "$PLC_DEVEL_BOOTSTRAP" = "true" ] ; then
- # So that we don't pollute the actual myplc-devel image, we use
- # the directory that was used to build the image instead of the
- # image itself, and mount everything by hand.
- mount -o bind,rw devel/data devel/root/data
- mount -t proc none devel/root/proc
-
- # If we used a local mirror, bind mount it into the chroot so that
- # we can use it again.
- if [ "${PLC_DEVEL_FEDORA_URL:0:7}" = "file://" ] ; then
- mkdir -p devel/root/usr/share/mirrors/fedora
- mount -o bind,ro ${PLC_DEVEL_FEDORA_URL#file://} devel/root/usr/share/mirrors/fedora
- fi
-
- # Clean up before exiting if anything goes wrong
- trap "umount $PWD/devel/root/data;
- umount $PWD/devel/root/proc;
- umount $PWD/devel/root/usr/share/mirrors/fedora" ERR INT
-
- # Build myplc inside myplc-devel. Make sure PLC_DEVEL_BOOTSTRAP is
- # false to avoid infinite recursion.
- chroot devel/root su - <<EOF
-set -x
-service plc start
-plc-config --category=plc_devel --variable=bootstrap --value="false" --save
-service plc reload
-cd /
-cvs -d /cvs checkout build
-make -C /build myplc
-EOF
-
- # Yoink the image that was just built
- mv devel/data/build/BUILD/myplc-*/myplc/root{,.img} devel/data/build/BUILD/myplc-*/myplc/data .
-
- # Clean up
- umount devel/root/data
- umount devel/root/proc
- umount devel/root/usr/share/mirrors/fedora || :
-
- # Could leave it around, but it does consume a lot of disk space
- # rm -rf devel/data/build
- # mkdir -p devel/data/build
-
- # No need to continue
- exit 0
-fi
-
-#
-# Build myplc in the host environment. This section is executed if
-# PLC_DEVEL_BOOTSTRAP is false.
-#
-
-echo "* myplc: Installing base filesystem"
-mkdir -p root data
-make_chroot root plc_config.xml
-
-# Build schema
-echo "* myplc: Building database schema"
-make -C $srcdir/pl_db
+# XXX .spec file needs to have the appropriate set of requires statements
# Install configuration scripts
-echo "* myplc: Installing configuration scripts"
-install -D -m 755 plc_config.py root/tmp/plc_config.py
-chroot root sh -c 'cd /tmp; python plc_config.py build; python plc_config.py install'
-install -D -m 755 plc-config root/usr/bin/plc-config
-install -D -m 755 api-config root/usr/bin/api-config
-install -D -m 755 db-config root/usr/bin/db-config
-install -D -m 755 dns-config root/usr/bin/dns-config
+echo "* myplc-native: Installing configuration scripts"
+pldistro=$1; shift
+RPM_BUILD_ROOT=$1 ; shift
+PYTHON_SITEARCH=`python -c 'from distutils.sysconfig import get_python_lib; print get_python_lib(1)'`
+rm -rf ${RPM_BUILD_ROOT}
+mkdir -p ${RPM_BUILD_ROOT}
+echo "* myplc-native: installing plc_config.py in " ${PYTHON_SITEARCH}
+install -D -m 755 plc_config.py ${RPM_BUILD_ROOT}/${PYTHON_SITEARCH}/plc_config.py
+install -D -m 644 bashrc ${RPM_BUILD_ROOT}/usr/share/myplc/bashrc
+echo "* myplc-native: installing scripts in /usr/bin"
+install -D -m 755 plc-config ${RPM_BUILD_ROOT}/usr/bin/plc-config
+install -D -m 755 plc-config-tty ${RPM_BUILD_ROOT}/usr/bin/plc-config-tty
+install -D -m 755 db-config ${RPM_BUILD_ROOT}/usr/bin/db-config
+install -D -m 755 dns-config ${RPM_BUILD_ROOT}/usr/bin/dns-config
+install -D -m 755 plc-map.py ${RPM_BUILD_ROOT}/usr/bin/plc-map.py
+install -D -m 755 plc-kml.py ${RPM_BUILD_ROOT}/usr/bin/plc-kml.py
+install -D -m 755 refresh-peer.py ${RPM_BUILD_ROOT}/usr/bin/refresh-peer.py
+install -D -m 755 clean-empty-dirs.py ${RPM_BUILD_ROOT}/usr/bin/clean-empty-dirs.py
+install -D -m 755 mtail.py ${RPM_BUILD_ROOT}/usr/bin/mtail.py
+install -D -m 755 plc-check-ssl-peering.py ${RPM_BUILD_ROOT}/usr/bin/plc-check-ssl-peering.py
+install -D -m 755 plc-orphan-accounts.py ${RPM_BUILD_ROOT}/usr/bin/plc-orphan-accounts.py
+
+# Extra scripts (mostly for mail and dns) not installed by myplc by default. Used in production
+echo "* myplc-native: installing scripts in /etc/support-scripts"
+mkdir -p ${RPM_BUILD_ROOT}/etc/support-scripts
+cp support-scripts/* ${RPM_BUILD_ROOT}/etc/support-scripts
+chmod 444 ${RPM_BUILD_ROOT}/etc/support-scripts/*
+
+# copy initscripts to etc/plc_sliceinitscripts
+mkdir -p ${RPM_BUILD_ROOT}/etc/plc_sliceinitscripts
+cp plc_sliceinitscripts/* ${RPM_BUILD_ROOT}/etc/plc_sliceinitscripts
+chmod 444 ${RPM_BUILD_ROOT}/etc/plc_sliceinitscripts/*
# Install initscripts
-echo "* myplc: Installing initscripts"
-find plc.d | cpio -p -d -u root/etc/
-install -D -m 755 guest.init root/etc/init.d/plc
-chroot root sh -c 'chkconfig --add plc; chkconfig plc on'
-
-# Install DB schema and API code
-echo "* myplc: Installing DB schema and API code"
-mkdir -p root/usr/share
-rsync -a $srcdir/pl_db $srcdir/plc_api root/usr/share/
-
-# Install web scripts
-echo "* myplc: Installing web scripts"
-mkdir -p root/usr/bin
-install -m 755 \
- $srcdir/plc/scripts/gen-sites-xml.py \
- $srcdir/plc/scripts/gen-slices-xml-05.py \
- $srcdir/plc/scripts/gen-static-content.py \
- root/usr/bin/
-
-# Install web pages
-echo "* myplc: Installing web pages"
-mkdir -p root/var/www/html
-# Exclude old cruft, unrelated GENI pages, and official documents
-rsync -a \
- --exclude='*2002' --exclude='*2003' \
- --exclude=geni --exclude=PDN --exclude=Talks \
- $srcdir/plc_www/ root/var/www/html/
+echo "* myplc-native: Installing initscripts"
+install -D -m 755 plc.init ${RPM_BUILD_ROOT}/etc/init.d/plc
+find plc.d | cpio -p -d -u ${RPM_BUILD_ROOT}/etc/
+chmod 755 ${RPM_BUILD_ROOT}/etc/plc.d/*
# Install configuration file
echo "* myplc: Installing configuration file"
-install -D -m 444 $config data/etc/planetlab/default_config.xml
-install -D -m 444 plc_config.dtd data/etc/planetlab/plc_config.dtd
-
-# Move "data" directories out of the installation
-datadirs=(
-/etc/planetlab
-/var/lib/pgsql
-/var/www/html/alpina-logs
-/var/www/html/boot
-/var/www/html/download
-/var/www/html/generated
-/var/www/html/install-rpms
-/var/www/html/xml
-)
-
-move_datadirs root data "${datadirs[@]}"
+install -D -m 444 default_config.xml ${RPM_BUILD_ROOT}/etc/planetlab/default_config.xml
+install -D -m 444 plc_config.dtd ${RPM_BUILD_ROOT}/etc/planetlab/plc_config.dtd
-# Initialize node RPMs directory. The PlanetLab-Bootstrap.tar.bz2
-# tarball already contains all of the node RPMs pre-installed. Only
-# updates or optional packages should be placed in this directory.
-if [ -n "$RPM_BUILD_DIR" ] ; then
- echo "* myplc: Initializing node RPMs directory"
- RPM_RPMS_DIR=$(cd $(dirname $RPM_BUILD_DIR)/RPMS && pwd -P)
- mkdir -p data/var/www/html/install-rpms/planetlab
- if [ -f $RPM_RPMS_DIR/yumgroups.xml ] ; then
- install -D -m 644 $RPM_RPMS_DIR/yumgroups.xml \
- data/var/www/html/install-rpms/planetlab/yumgroups.xml
- fi
- # yum-2.0.x
- if [ -x /usr/bin/yum-arch ] ; then
- yum-arch data/var/www/html/install-rpms/planetlab
- fi
- # yum-2.4.x
- if [ -x /usr/bin/createrepo ] ; then
- if [ -f data/var/www/html/install-rpms/planetlab/yumgroups.xml ] ; then
- groupfile="-g yumgroups.xml"
- fi
- createrepo $groupfile data/var/www/html/install-rpms/planetlab
- fi
-fi
+# Install db-config.d files
+echo "* myplc: Installing db-config.d files"
+mkdir -p ${RPM_BUILD_ROOT}/etc/planetlab/db-config.d
+cp db-config.d/* ${RPM_BUILD_ROOT}/etc/planetlab/db-config.d
+chmod 444 ${RPM_BUILD_ROOT}/etc/planetlab/db-config.d/*
-# Make image out of directory
-echo "* myplc: Building loopback image"
-make_image root root.img
+# yumgroups.xml and yum repo : let noderepo handle that
exit 0