in_port(1), eth(...), eth_type(0x0800), ipv4(...), tcp(...)
+Wildcarded flow key format
+--------------------------
+
+A wildcarded flow is described with two sequences of Netlink attributes
+passed over the Netlink socket. A flow key, exactly as described above, and an
+optional corresponding flow mask.
+
+A wildcarded flow can represent a group of exact match flows. Each '1' bit
+in the mask specifies a exact match with the corresponding bit in the flow key.
+A '0' bit specifies a don't care bit, which will match either a '1' or '0' bit
+of a incoming packet. Using wildcarded flow can improve the flow set up rate
+by reduce the number of new flows need to be processed by the user space program.
+
+Support for the mask Netlink attribute is optional for both the kernel and user
+space program. The kernel can ignore the mask attribute, installing an exact
+match flow, or reduce the number of don't care bits in the kernel to less than
+what was specified by the user space program. In this case, variations in bits
+that the kernel does not implement will simply result in additional flow setups.
+The kernel module will also work with user space programs that neither support
+nor supply flow mask attributes.
+
+Since the kernel may ignore or modify wildcard bits, it can be difficult for
+the userspace program to know exactly what matches are installed. There are
+two possible approaches: reactively install flows as they miss the kernel
+flow table (and therefore not attempt to determine wildcard changes at all)
+or use the kernel's response messages to determine the installed wildcards.
+
+When interacting with userspace, the kernel should maintain the match portion
+of the key exactly as originally installed. This will provides a handle to
+identify the flow for all future operations. However, when reporting the
+mask of an installed flow, the mask should include any restrictions imposed
+by the kernel.
+
+The behavior when using overlapping wildcarded flows is undefined. It is the
+responsibility of the user space program to ensure that any incoming packet
+can match at most one flow, wildcarded or not. The current implementation
+performs best-effort detection of overlapping wildcarded flows and may reject
+some but not all of them. However, this behavior may change in future versions.
+
+
Basic rule for evolving flow keys
---------------------------------
Naively, to add VLAN support, it makes sense to add a new "vlan" flow
key attribute to contain the VLAN tag, then continue to decode the
encapsulated headers beyond the VLAN tag using the existing field
-definitions. With this change, an TCP packet in VLAN 10 would have a
+definitions. With this change, a TCP packet in VLAN 10 would have a
flow key much like this:
eth(...), vlan(vid=10, pcp=0), eth_type(0x0800), ip(proto=6, ...), tcp(...)
and therefore will not misinterpret them. (Also, the outer eth_type
is still 0x8100, not changed to 0x0800.)
+Handling malformed packets
+--------------------------
+
+Don't drop packets in the kernel for malformed protocol headers, bad
+checksums, etc. This would prevent userspace from implementing a
+simple Ethernet switch that forwards every packet.
+
+Instead, in such a case, include an attribute with "empty" content.
+It doesn't matter if the empty content could be valid protocol values,
+as long as those values are rarely seen in practice, because userspace
+can always forward all packets with those values to userspace and
+handle them individually.
+
+For example, consider a packet that contains an IP header that
+indicates protocol 6 for TCP, but which is truncated just after the IP
+header, so that the TCP header is missing. The flow key for this
+packet would include a tcp attribute with all-zero src and dst, like
+this:
+
+ eth(...), eth_type(0x0800), ip(proto=6, ...), tcp(src=0, dst=0)
+
+As another example, consider a packet with an Ethernet type of 0x8100,
+indicating that a VLAN TCI should follow, but which is truncated just
+after the Ethernet type. The flow key for this packet would include
+an all-zero-bits vlan and an empty encap attribute, like this:
+
+ eth(...), eth_type(0x8100), vlan(0), encap()
+
+Unlike a TCP packet with source and destination ports 0, an
+all-zero-bits VLAN TCI is not that rare, so the CFI bit (aka
+VLAN_TAG_PRESENT inside the kernel) is ordinarily set in a vlan
+attribute expressly to allow this situation to be distinguished.
+Thus, the flow key in this second example unambiguously indicates a
+missing or malformed VLAN TCI.
+
Other rules
-----------
git://git.onelab.eu / sliver-openvswitch.git / blobdiff