# Copyright (C) 2006 The Trustees of Princeton University
#
# $Id$
-#
+# $HeadURL$
from plc_config import PLCConfiguration
import sys
'error_cmd': '',
'ignore_cmd_errors': False,
'always_update': False},
- {'enabled': True,
- 'source': 'PlanetLabConf/keys.php?role=admin',
- 'dest': '/home/pl_admin/.ssh/authorized_keys',
- 'file_permissions': '644',
- 'file_owner': 'pl_admin',
- 'file_group': 'pl_admin',
- 'preinstall_cmd': 'grep -q pl_admin /etc/passwd',
- 'postinstall_cmd': '/bin/chmod 700 /home/pl_admin/.ssh',
- 'error_cmd': '',
- 'ignore_cmd_errors': False,
- 'always_update': False},
-
# Log rotation configuration
{'enabled': True,
'source': 'PlanetLabConf/logrotate.conf',
'ignore_cmd_errors': False,
'always_update': False},
- # XXX Required for old Node Manager
- # Node Manager configuration
- {'enabled': True,
- 'source': 'PlanetLabConf/pl_nm.conf',
- 'dest': '/etc/planetlab/pl_nm.conf',
- 'file_permissions': '644',
- 'file_owner': 'root',
- 'file_group': 'root',
- 'preinstall_cmd': '',
- 'postinstall_cmd': '/etc/init.d/pl_nm restart',
- 'error_cmd': '',
- 'ignore_cmd_errors': False,
- 'always_update': False},
- {'enabled': True,
- 'source': 'PlanetLabConf/RootResources/plc_slice_pool.php',
- 'dest': '/home/pl_nm/RootResources/plc_slice_pool',
- 'file_permissions': '644',
- 'file_owner': 'pl_nm',
- 'file_group': 'pl_nm',
- 'preinstall_cmd': '',
- 'postinstall_cmd': '',
- 'error_cmd': '',
- 'ignore_cmd_errors': False,
- 'always_update': False},
- {'enabled': True,
- 'source': 'PlanetLabConf/RootResources/pl_conf.py',
- 'dest': '/home/pl_nm/RootResources/pl_conf',
- 'file_permissions': '644',
- 'file_owner': 'pl_nm',
- 'file_group': 'pl_nm',
- 'preinstall_cmd': '',
- 'postinstall_cmd': '/etc/init.d/pl_nm restart',
- 'error_cmd': '',
- 'ignore_cmd_errors': False,
- 'always_update': False},
- {'enabled': True,
- 'source': 'PlanetLabConf/RootResources/pl_netflow.py',
- 'dest': '/home/pl_nm/RootResources/pl_netflow',
- 'file_permissions': '644',
- 'file_owner': 'pl_nm',
- 'file_group': 'pl_nm',
- 'preinstall_cmd': '',
- 'postinstall_cmd': '',
- 'error_cmd': '',
- 'ignore_cmd_errors': False,
- 'always_update': False},
-
# XXX Required for old Node Manager
# Proper configuration
{'enabled': True,
'file_owner': 'root',
'file_group': 'root',
'preinstall_cmd': '',
- 'postinstall_cmd': '/etc/init.d/pl_nm restart',
+ 'postinstall_cmd': '',
'error_cmd': '',
'ignore_cmd_errors': True,
'always_update': False},
'postinstall_cmd': '/sbin/iptables-restore --noflush < /etc/planetlab/blacklist',
'error_cmd': '',
'ignore_cmd_errors': True,
- 'always_update': True},
+ 'always_update': False},
# /etc/issue
{'enabled': True,
'postinstall_cmd': '/sbin/sysctl -e -p /etc/sysctl.conf',
'error_cmd': '',
'ignore_cmd_errors': False,
- 'always_update': True},
+ 'always_update': False},
# Sendmail configuration
{'enabled': True,
'always_update': False},
# Ping of death configuration
+ # the 'restart' postcommand doesn't work, b/c the pod script doesn't support it.
{'enabled': True,
'source': 'PlanetLabConf/ipod.conf.php',
'dest': '/etc/ipod.conf',
'file_owner': 'root',
'file_group': 'root',
'preinstall_cmd': '',
- 'postinstall_cmd': '',
+ 'postinstall_cmd': '/etc/init.d/pod start',
'error_cmd': '',
'ignore_cmd_errors': False,
'always_update': False},
# sudo configuration
{'enabled': True,
- 'source': 'PlanetLabConf/sudoers',
+ 'source': 'PlanetLabConf/sudoers.php',
'dest': '/etc/sudoers',
'file_permissions': '440',
'file_owner': 'root',
'min_role_id': 10},
# CPU share
- {'name': "cpu_min",
- 'description': "Minimum CPU share (ms/s)",
+ {'name': "cpu_pct",
+ 'description': "Reserved CPU percent",
'min_role_id': 10},
{'name': "cpu_share",
'description': "Number of CPU shares",
'min_role_id': 10},
# Bandwidth limits
- {'name': "net_min",
- 'description': "Minimum bandwidth (bps)",
+ {'name': "net_min_rate",
+ 'description': "Minimum bandwidth (kbps)",
'min_role_id': 10},
- {'name': "net_max",
- 'description': "Maximum bandwidth (bps)",
+ {'name': "net_max_rate",
+ 'description': "Maximum bandwidth (kbps)",
'min_role_id': 10},
- {'name': "net_avg",
- 'description': "Average bandwidth (bps)",
+ {'name': "net_i2_min_rate",
+ 'description': "Minimum bandwidth over I2 routes (kbps)",
'min_role_id': 10},
- {'name': "net_share",
- 'description': "Number of bandwidth shares",
+ {'name': "net_i2_max_rate",
+ 'description': "Maximum bandwidth over I2 routes (kbps)",
'min_role_id': 10},
- {'name': "net2_min",
- 'description': "Minimum bandwidth over routes exempt from node bandwidth limits (bps)",
+ {'name': "net_max_kbyte",
+ 'description': "Maximum daily network Tx KByte limit.",
'min_role_id': 10},
- {'name': "net2_max",
- 'description': "Maximum bandwidth over routes exempt from node bandwidth limits (bps)",
+ {'name': "net_thresh_kbyte",
+ 'description': "KByte limit before warning and throttling.",
'min_role_id': 10},
- {'name': "net2_avg",
- 'description': "Average bandwidth over routes exempt from node bandwidth limits (bps)",
+ {'name': "net_i2_max_kbyte",
+ 'description': "Maximum daily network Tx KByte limit to I2 hosts.",
'min_role_id': 10},
- {'name': "net2_share",
- 'description': "Number of bandwidth shares over routes exempt from node bandwidth limits",
+ {'name': "net_i2_thresh_kbyte",
+ 'description': "KByte limit to I2 hosts before warning and throttling.",
'min_role_id': 10},
-
+ {'name': "net_share",
+ 'description': "Number of bandwidth shares",
+ 'min_role_id': 10},
+ {'name': "net_i2_share",
+ 'description': "Number of bandwidth shares over I2 routes",
+ 'min_role_id': 10},
+
# Disk quota
{'name': "disk_max",
'description': "Disk quota (1k disk blocks)",
'description': "Proper operation (e.g. bind_socket)",
'min_role_id': 10},
- # XXX Required for old Node Manager
- # Special attributes applicable to Slice Creation Service (pl_conf) slice
- {'name': "plc_slice_type",
- 'description': "Type of slice rspec to be created",
- 'min_role_id': 20},
- {'name': "plc_agent_version",
- 'description': "Version of PLC agent (slice creation service) software to be deployed",
+ # VServer capabilities
+ {'name': "capabilities",
+ 'description': "VServer bcapabilities (separate by commas)",
+ 'min_role_id': 10},
+
+ # Vsys
+ {'name': "vsys",
+ 'description': "Bind vsys script fd's to a slice's vsys directory.",
+ 'min_role_id': 10},
+
+ # CoDemux
+ {'name': "codemux",
+ 'description': "Demux HTTP between slices using localhost ports. Value in the form 'host, localhost port'.",
'min_role_id': 10},
- {'name': "plc_ticket_pubkey",
- 'description': "Public key used to verify PLC-signed tickets",
- 'min_role_id': 10}
+
]
# Get list of existing attribute types
else:
UpdateSliceAttributeType(default_attribute_type['name'], default_attribute_type)
- # Get contents of SSL public certificate used for signing slice tickets
- try:
- plc_ticket_pubkey = ""
- for line in file(plc_ma_sa['ca_ssl_key_pub']):
- # Skip comments
- if line[0:5] != "-----":
- # XXX The embedded newlines matter, do not strip()!
- plc_ticket_pubkey += line
- except:
- plc_ticket_pubkey = '%KEY%'
+ # Default Initscripts
+ default_initscripts = []
- # Create/update system slices
- default_slices = [
- # XXX Required for old Node Manager
- {'name': "pl_conf",
- 'description': "PlanetLab Slice Creation Service (SCS)",
- 'url': url,
- 'instantiation': "plc-instantiated",
- # Renew forever
- 'expires': sys.maxint,
- 'attributes': [('plc_slice_type', "VServerSlice"),
- ('plc_agent_version', "1.0"),
- ('plc_ticket_pubkey', plc_ticket_pubkey)]},
+ # Find initscripts and add them to the db
+ for (root, dirs, files) in os.walk("/etc/plc_sliceinitscripts"):
+ for f in files:
+ # Read the file
+ file = open(root + "/" + f, "ro")
+ default_initscripts.append({"name": plc['slice_prefix'] + "_" + f,
+ "enabled": True,
+ "script": file.read().replace("@SITE@", url).replace("@PREFIX@", plc['slice_prefix'])})
+ file.close()
- # XXX Required for old Node Manager
- {'name': "pl_conf_vserverslice",
- 'description': "Default attributes for vserver slices",
- 'url': url,
- 'instantiation': "plc-instantiated",
- # Renew forever
- 'expires': sys.maxint,
- 'attributes': [('cpu_share', "32"),
- ('plc_slice_type', "VServerSlice"),
- ('disk_max', "5000000")]},
+ # Get list of existing initscripts
+ oldinitscripts = GetInitScripts()
+ oldinitscripts = [script['name'] for script in oldinitscripts]
+ for initscript in default_initscripts:
+ if initscript['name'] not in oldinitscripts: AddInitScript(initscript)
+
+ # Setup default slice attribute types
+ default_setting_types = [
+
+ {'category' : "general",
+ 'name' : "ifname",
+ 'description': "Set interface name, instead of eth0 or the like",
+ 'min_role_id' : 40},
+ {'category' : "Multihome",
+ 'name' : "alias",
+ 'description': "Specifies that the network is used for multihoming",
+ 'min_role_id' : 40},
+
+ {'category' : "hidden",
+ 'name' : "backdoor",
+ 'description': "For testing new settings",
+ 'min_role_id' : 10},
+ ] + [
+ { "category" : "WiFi",
+ "name" : x,
+ "description" : "802.11 %s -- see %s"%(y,z),
+ "min_role_id" : 40 } for (x,y,z) in [
+ ("mode","Mode","iwconfig"),
+ ("essid","ESSID","iwconfig"),
+ ("nw","Network Id","iwconfig"),
+ ("freq","Frequency","iwconfig"),
+ ("channel","Channel","iwconfig"),
+ ("sens","sensitivity threshold","iwconfig"),
+ ("rate","Rate","iwconfig"),
+ ("key","key","iwconfig key"),
+ ("key1","key1","iwconfig key [1]"),
+ ("key2","key2","iwconfig key [2]"),
+ ("key3","key3","iwconfig key [3]"),
+ ("key4","key4","iwconfig key [4]"),
+ ("securitymode","Security mode","iwconfig enc"),
+ ("iwconfig","Additional parameters to iwconfig","ifup-wireless"),
+ ("iwpriv","Additional parameters to iwpriv","ifup-wireless"),
+ ]
+ ]
+
+
+ # Get list of existing attribute types
+ setting_types = GetNodeNetworkSettingTypes()
+ setting_types = [setting_type['name'] for setting_type in setting_types]
+
+ # Create/update default slice setting types
+ for default_setting_type in default_setting_types:
+ if default_setting_type['name'] not in setting_types:
+ AddNodeNetworkSettingType(default_setting_type)
+ else:
+ UpdateNodeNetworkSettingType(default_setting_type['name'], default_setting_type)
+
+ # Create/update system slices
+ default_slices = [
# PlanetFlow
{'name': plc['slice_prefix'] + "_netflow",
'description': "PlanetFlow Traffic Auditing Service",
'url': url,
'instantiation': "plc-instantiated",
- # Renew forever
- 'expires': sys.maxint,
+ # Renew forever (minus one day, work around date conversion weirdness)
+ 'expires': 0x7fffffff - (60 * 60 * 24),
'attributes': [('system', "1"),
('vref', "planetflow"),
('proper_op', "open file=/etc/passwd, flags=r"),
('proper_op', "create_socket"),
- ('proper_op', "bind_socket")]},
+ ('proper_op', "bind_socket"),
+ ('vsys' , "pfmount")]},
+ # Sirius
+ {'name': plc['slice_prefix'] + "_sirius",
+ 'description': 'The Sirius Calendar Service.\n\nSirius provides system-wide reservations of 25% CPU and 2Mb/s outgoing\nbandwidth. Sign up for hour-long slots using the Web GUI at the\nPlanetLab website.\n\nThis slice should not generate traffic external to PlanetLab.\n',
+ 'url': url,
+ 'instantiation': "plc-instantiated",
+ # Renew forever (minus one day, work around date conversion weirdness)
+ 'expires': 0x7fffffff - (60 * 60 * 24),
+ 'attributes': [('system', "1"),
+ ('net_min_rate', "2000"),
+ ('cpu_pct', "25"),
+ ('initscript', plc['slice_prefix'] + "_sirius")]}
]
-
-
+
for default_slice in default_slices:
slices = GetSlices([default_slice['name']])
if slices:
if (name, value) not in slice_attributes:
AddSliceAttribute(slice['name'], name, value)
+ installfailed = """
+Once the node meets these requirements, please reinitiate the install
+by visiting:
+
+https://%(PLC_WWW_HOST)s:%(PLC_WWW_SSL_PORT)d/db/nodes/?id=%(node_id)d
+
+Update the BootState to 'Reinstall', then reboot the node.
+
+If you have already performed this step and are still receiving this
+message, please reply so that we may investigate the problem.
+"""
+
+ # Load default message templates
+ message_templates = [
+ {'message_id': 'Verify account',
+ 'subject': "Verify account registration",
+ 'template': """
+Please verify that you registered for a %(PLC_NAME)s account with the
+username %(email)s by visiting:
+
+https://%(PLC_WWW_HOST)s:%(PLC_WWW_SSL_PORT)d/db/persons/register.php?id=%(person_id)d&key=%(verification_key)s
+
+If you did not register for a %(PLC_NAME)s account, please ignore this
+message, or contact %(PLC_NAME)s Support <%(PLC_MAIL_SUPPORT_ADDRESS)s>.
+"""
+ },
+
+ {'message_id': 'New PI account',
+ 'subject': "New PI account registration from %(first_name)s %(last_name)s <%(email)s> at %(site_name)s",
+ 'template': """
+%(first_name)s %(last_name)s <%(email)s> has signed up for a new
+%(PLC_NAME)s account at %(site_name)s and has requested a PI role. PIs
+are responsible for enabling user accounts, creating slices, and
+ensuring that all users abide by the %(PLC_NAME)s Acceptable Use
+Policy.
+
+Only %(PLC_NAME)s administrators may enable new PI accounts. If you
+are a PI at %(site_name)s, please respond and indicate whether this
+registration is acceptable.
+
+To view the request, visit:
+
+https://%(PLC_WWW_HOST)s:%(PLC_WWW_SSL_PORT)d/db/persons/index.php?id=%(person_id)d
+"""
+ },
+
+ {'message_id': 'New account',
+ 'subject': "New account registration from %(first_name)s %(last_name)s <%(email)s> at %(site_name)s",
+ 'template': """
+%(first_name)s %(last_name)s <%(email)s> has signed up for a new
+%(PLC_NAME)s account at %(site_name)s and has requested the following
+roles: %(roles)s.
+
+To deny the request or enable the account, visit:
+
+https://%(PLC_WWW_HOST)s:%(PLC_WWW_SSL_PORT)d/db/persons/index.php?id=%(person_id)d
+"""
+ },
+
+ {'message_id': 'Password reset requested',
+ 'subject': "Password reset requested",
+ 'template': """
+Someone has requested that the password of your %(PLC_NAME)s account
+%(email)s be reset. If this person was you, you may continue with the
+reset by visiting:
+
+https://%(PLC_WWW_HOST)s:%(PLC_WWW_SSL_PORT)d/db/persons/reset_password.php?id=%(person_id)d&key=%(verification_key)s
+
+If you did not request that your password be reset, please contact
+%(PLC_NAME)s Support <%(PLC_MAIL_SUPPORT_ADDRESS)s>. Do not quote or
+otherwise include any of this text in any correspondence.
+"""
+ },
+
+ {'message_id': 'Password reset',
+ 'subject': "Password reset",
+ 'template': """
+The password of your %(PLC_NAME)s account %(email)s has been
+temporarily reset to:
+
+%(password)s
+
+Please change it at as soon as possible by visiting:
+
+https://%(PLC_WWW_HOST)s:%(PLC_WWW_SSL_PORT)d/db/persons/index.php?id=%(person_id)d
+
+If you did not request that your password be reset, please contact
+%(PLC_NAME)s Support <%(PLC_MAIL_SUPPORT_ADDRESS)s>. Do not quote or
+otherwise include any of this text in any correspondence.
+"""
+ },
+
+ # Boot Manager messages
+ {'message_id': "installfinished",
+ 'subject': "%(hostname)s completed installation",
+ 'template': """
+%(hostname)s just completed installation.
+
+The node should be usable in a couple of minutes if installation was
+successful.
+"""
+ },
+
+ {'message_id': "insufficientdisk",
+ 'subject': "%(hostname)s does not have sufficient disk space",
+ 'template': """
+%(hostname)s failed to boot because it does not have sufficent disk
+space, or because its disk controller was not recognized.
+
+Please replace the current disk or disk controller or install
+additional disks to meet the current hardware requirements.
+""" + installfailed
+ },
+
+ {'message_id': "insufficientmemory",
+ 'subject': "%(hostname)s does not have sufficient memory",
+ 'template': """
+%(hostname)s failed to boot because it does not have sufficent
+memory.
+
+Please install additional memory to meet the current hardware
+requirements.
+""" + installfailed
+ },
+
+ {'message_id': "authfail",
+ 'subject': "%(hostname)s failed to authenticate",
+ 'template':
+"""
+%(hostname)s failed to authenticate for the following reason:
+
+%(fault)s
+
+The most common reason for authentication failure is that the
+authentication key stored in the node configuration file, does not
+match the key on record.
+
+There are two possible steps to resolve the problem.
+
+1. If you have used an All-in-one BootCD that includes the plnode.txt file,
+ then please check your machine for any old boot media, either in the
+ floppy drive, or on a USB stick. It is likely that an old configuration
+ is being used instead of the new configuration stored on the BootCD.
+Or,
+2. If you are using Generic BootCD image, then regenerate the node
+ configuration file by visiting:
+
+ https://%(PLC_WWW_HOST)s:%(PLC_WWW_SSL_PORT)d/db/nodes/?id=%(node_id)d
+
+ Under 'Download', follow the 'Download plnode.txt file for %(hostname)s'
+ option, and save the downloaded file as plnode.txt on either a floppy
+ disk or a USB flash drive. Be sure the 'Boot State' is set to 'Boot',
+ and, then reboot the node.
+
+If you have already performed this step and are still receiving this
+message, please reply so that we can help investigate the problem.
+"""
+ },
+
+ {'message_id': "notinstalled",
+ 'subject': "%(hostname)s is not installed",
+ 'template':
+"""
+%(hostname)s failed to boot because it has either never been
+installed, or the installation is corrupt.
+
+Please check if the hard drive has failed, and replace it if so. After
+doing so, visit:
+
+https://%(PLC_WWW_HOST)s:%(PLC_WWW_SSL_PORT)d/db/nodes/?id=%(node_id)d
+
+Change the 'Boot State' to 'Reinstall', and then reboot the node.
+
+If you have already performed this step and are still receiving this
+message, please reply so that we may investigate the problem.
+"""
+ },
+
+ {'message_id': "hostnamenotresolve",
+ 'subject': "%(hostname)s does not resolve",
+ 'template':
+"""
+%(hostname)s failed to boot because its hostname does not resolve, or
+does resolve but does not match its configured IP address.
+
+Please check the network settings for the node, especially its
+hostname, IP address, and DNS servers, by visiting:
+
+https://%(PLC_WWW_HOST)s:%(PLC_WWW_SSL_PORT)d/db/nodes/?id=%(node_id)d
+
+Correct any errors, and change the 'Boot State' to 'Reinstall', and then
+reboot the node.
+
+If you have already performed this step and are still receiving this
+message, please reply so that we may investigate the problem.
+"""
+ },
+
+ # XXX N.B. I don't think these are necessary, since there's no
+ # way that the Boot Manager would even be able to contact the
+ # API to send these messages.
+
+ {'message_id': "noconfig",
+ 'subject': "%(hostname)s does not have a configuration file",
+ 'template': """
+%(hostname)s failed to boot because it could not find a PlanetLab
+configuration file. To create this file, visit:
+
+https://%(PLC_WWW_HOST)s:%(PLC_WWW_SSL_PORT)d/db/nodes/?id=%(node_id)d
+
+Click the Configuration File link, and save the downloaded file as
+plnode.txt on either a floppy disk or a USB flash drive. Change the
+'Boot State' to 'Reinstall', and then reboot the node.
+
+If you have already performed this step and are still receiving this
+message, please reply so that we may investigate the problem.
+"""
+ },
+
+ {'message_id': "nodetectednetwork",
+ 'subject': "%(hostname)s has unsupported network hardware",
+ 'template':
+"""
+
+%(hostname)s failed to boot because it has network hardware that is
+unsupported by the current production kernel. If it has booted
+successfully in the past, please try re-installing it by visiting:
+
+https://%(PLC_WWW_HOST)s:%(PLC_WWW_SSL_PORT)d/db/nodes/?id=%(node_id)d
+
+Change the 'Boot State' to 'Reinstall', and then reboot the node.
+
+If you have already performed this step and are still receiving this
+message, please reply so that we may investigate the problem.
+"""
+ },
+ ]
+
+ for template in message_templates:
+ messages = GetMessages([template['message_id']])
+ if not messages:
+ AddMessage(template)
+
+
+ ### Setup Initial PCU information
+ pcu_types = [{'model': 'AP79xx',
+ 'name': 'APC AP79xx',
+ 'pcu_protocol_types': [{ 'port': 80,
+ 'protocol': 'APC79xxHttp',
+ 'supported': False},
+ { 'port': 23,
+ 'protocol': 'APC79xx',
+ 'supported': True},
+ { 'port': 22,
+ 'protocol': 'APC79xx',
+ 'supported': True}],
+ },
+ {'model': 'Masterswitch',
+ 'name': 'APC Masterswitch',
+ 'pcu_protocol_types': [{ 'port': 80,
+ 'protocol': 'APCMasterHttp',
+ 'supported': False},
+ { 'port': 23,
+ 'protocol': 'APCMaster',
+ 'supported': True},
+ { 'port': 22,
+ 'protocol': 'APCMaster',
+ 'supported': True}],
+ },
+ {'model': 'DS4-RPC',
+ 'name': 'BayTech DS4-RPC',
+ 'pcu_protocol_types': [{ 'port': 80,
+ 'protocol': 'BayTechHttp',
+ 'supported': False},
+ { 'port': 23,
+ 'protocol': 'BayTech',
+ 'supported': True},
+ { 'port': 22,
+ 'protocol': 'BayTech',
+ 'supported': True}],
+ },
+ {'model': 'IP-41x_IP-81x',
+ 'name': 'Dataprobe IP-41x & IP-81x',
+ 'pcu_protocol_types': [ { 'port': 23,
+ 'protocol': 'IPALTelnet',
+ 'supported': True},
+ { 'port': 80,
+ 'protocol': 'IPALHttp',
+ 'supported': False}],
+ },
+ {'model': 'DRAC3',
+ 'name': 'Dell RAC Version 3',
+ 'pcu_protocol_types': [],
+ },
+ {'model': 'DRAC4',
+ 'name': 'Dell RAC Version 4',
+ 'pcu_protocol_types': [{ 'port': 443,
+ 'protocol': 'DRACRacAdm',
+ 'supported': True},
+ { 'port': 80,
+ 'protocol': 'DRACRacAdm',
+ 'supported': False},
+ { 'port': 22,
+ 'protocol': 'DRAC',
+ 'supported': True}],
+ },
+ {'model': 'ePowerSwitch',
+ 'name': 'ePowerSwitch 1/4/8x',
+ 'pcu_protocol_types': [{ 'port': 80,
+ 'protocol': 'ePowerSwitch',
+ 'supported': True}],
+ },
+ {'model': 'ilo2',
+ 'name': 'HP iLO2 (Integrated Lights-Out)',
+ 'pcu_protocol_types': [{ 'port': 443,
+ 'protocol': 'HPiLOHttps',
+ 'supported': True},
+ { 'port': 22,
+ 'protocol': 'HPiLO',
+ 'supported': True}],
+ },
+ {'model': 'ilo1',
+ 'name': 'HP iLO version 1',
+ 'pcu_protocol_types': [],
+ },
+ {'model': 'PM211-MIP',
+ 'name': 'Infratec PM221-MIP',
+ 'pcu_protocol_types': [],
+ },
+ {'model': 'AMT2.5',
+ 'name': 'Intel AMT v2.5 (Active Management Technology)',
+ 'pcu_protocol_types': [],
+ },
+ {'model': 'AMT3.0',
+ 'name': 'Intel AMT v3.0 (Active Management Technology)',
+ 'pcu_protocol_types': [],
+ },
+ {'model': 'WTI_IPS-4',
+ 'name': 'Western Telematic (WTI IPS-4)',
+ 'pcu_protocol_types': [],
+ },
+ {'model': 'unknown',
+ 'name': 'Unknown Vendor or Model',
+ 'pcu_protocol_types': [{ 'port': 443,
+ 'protocol': 'UnknownPCU',
+ 'supported': False},
+ { 'port': 80,
+ 'protocol': 'UnknownPCU',
+ 'supported': False},
+ { 'port': 23,
+ 'protocol': 'UnknownPCU',
+ 'supported': False},
+ { 'port': 22,
+ 'protocol': 'UnknownPCU',
+ 'supported': False}],
+ }]
+
+ # Get all model names
+ pcu_models = [type['model'] for type in GetPCUTypes()]
+ for type in pcu_types:
+ protocol_types = type['pcu_protocol_types']
+ # Take this value out of the struct.
+ del type['pcu_protocol_types']
+ if type['model'] not in pcu_models:
+ # Add the name/model info into DB
+ id = AddPCUType(type)
+ # for each protocol, also add this.
+ for ptype in protocol_types:
+ AddPCUProtocolType(id, ptype)
+
+
if __name__ == '__main__':
main()