# -*-python-*-
-#################### slice tag types
+# slice tag types
# xxx this should move to PLC/Accessors
# vref is now defined in an accessor
# initscript is now defined in an accessor
-
+
# Setup default slice tag types
slicetag_types = \
-[
- # Slice type (only vserver is supported)
- {'tagname': "type",
- 'description': "Type of slice (e.g. vserver)",
- 'category' : 'slice/general',
- 'roles': ['admin','pi']},
-
- # System slice
- {'tagname': "system",
- 'description': "Is a default system slice (1) or not (0 or unset)",
- 'category' : 'slice/general'},
-
- # Slice enabled (1) or suspended (0)
- {'tagname': "enabled",
- 'description': "Slice enabled (1 or unset) or suspended (0)",
- 'category' : 'slice/general'},
-
- # IP Addresses for a Slice
- {'tagname': "ip_addresses",
- 'description': "Add an ip address to a slice/sliver.",
- 'category' : 'slice/rspec'},
-
- # CPU share
- {'tagname': "cpu_pct",
- 'description': "Reserved CPU percent",
- 'category' : 'slice/rspec'},
- {'tagname': "cpu_share",
- 'description': "Number of CPU shares",
- 'category' : 'slice/rspec'},
-
- # Bandwidth limits
- {'tagname': "net_min_rate",
- 'description': "Minimum bandwidth (kbps)",
- 'category' : 'slice/rspec'},
- {'tagname': "net_max_rate",
- 'description': "Maximum bandwidth (kbps)",
- 'category' : 'slice/rspec'},
- {'tagname': "net_i2_min_rate",
- 'description': "Minimum bandwidth over I2 routes (kbps)",
- 'category' : 'slice/rspec'},
- {'tagname': "net_i2_max_rate",
- 'description': "Maximum bandwidth over I2 routes (kbps)",
- 'category' : 'slice/rspec'},
- {'tagname': "net_max_kbyte",
- 'description': "Maximum daily network Tx KByte limit.",
- 'category' : 'slice/rspec'},
- {'tagname': "net_thresh_kbyte",
- 'description': "KByte limit before warning and throttling.",
- 'category' : 'slice/rspec'},
- {'tagname': "net_i2_max_kbyte",
- 'description': "Maximum daily network Tx KByte limit to I2 hosts.",
- 'category' : 'slice/rspec'},
- {'tagname': "net_i2_thresh_kbyte",
- 'description': "KByte limit to I2 hosts before warning and throttling.",
- 'category' : 'slice/rspec'},
- {'tagname': "net_share",
- 'description': "Number of bandwidth shares",
- 'category' : 'slice/rspec'},
- {'tagname': "net_i2_share",
- 'description': "Number of bandwidth shares over I2 routes",
- 'category' : 'slice/rspec'},
-
- # Disk quota
- {'tagname': "disk_max",
- 'description': "Disk quota (1k disk blocks)",
- 'category' : 'slice/rspec'},
-
- # deprecated in nov. 2010
- # Proper operations
- #{'tagname': "proper_op",
- # 'description': "Proper operation (e.g. bind_socket)",
- # 'category' : 'slice/rspec'},
-
- # VServer capabilities
- {'tagname': "capabilities",
- 'description': "VServer bcapabilities (separate by commas)",
- 'category' : 'slice/rspec'},
-
- # Vsys
- {'tagname': "vsys",
- 'description': "Bind vsys script fd's to a slice's /vsys directory.",
- 'category' : 'slice/rspec'},
-
- # CoDemux
- {'tagname': "codemux",
- 'description': "Demux HTTP between slices using localhost ports. Value in the form 'host, localhost port'.",
- 'category' : 'slice/rspec'},
-
- # Delegation
- {'tagname': "delegations",
- 'description': "Coma seperated list of slices to give delegation authority to.",
- 'category' : 'slice/rspec',
- 'roles' : ['admin','pi','user']},
-
- # Capability to give a sliver access to unused raw disk
- {'tagname': "rawdisk",
- 'description': "map unused raw disk devices into the slice",
- 'category' : 'slice/access', # we should get rid of this category thing
- 'roles': ['admin','pi']},
-
- { 'tagname' : 'exempt_slice_until',
- 'description' : 'Exclude this slice from MyOps until given date (YYYYMMDD)',
- 'category' : 'slice/myops'},
-
- # DistributedRateLimiting slice
- {'tagname': "drl",
- 'description': "Is a default Distributed Rate Limiting slice (1) or not (0 or unset)",
- 'category' : 'slice/general'},
-
-]
+ [
+
+ # this applies on Node, not on Slice
+ # Slice type (only vserver is supported)
+ # {'tagname': "type",
+ # 'description': "Type of slice (e.g. vserver)",
+ # 'category' : 'slice/general',
+ # 'roles': ['admin','pi']},
+
+ # System slice
+ {'tagname': "system",
+ 'description': "Is a default system slice (1) or not (0 or unset)",
+ 'category': 'slice/general'},
+
+ # Slice enabled (1) or suspended (0)
+ {'tagname': "enabled",
+ 'description': "Slice enabled (1 or unset) or suspended (0)",
+ 'category': 'slice/general'},
+
+ # IP Addresses for a Slice
+ {'tagname': "ip_addresses",
+ 'description': "Add an ip address to a slice/sliver.",
+ 'category': 'slice/rspec'},
+ {'tagname': "isolate_loopback",
+ 'description': "Create an isolated loopback interface within the vserver rather than sharing with all vservers.",
+ 'category': 'slice/rspec'},
+
+ # CPU share
+ {'tagname': "cpu_pct",
+ 'description': "Reserved CPU percent",
+ 'category': 'slice/rspec'},
+ {'tagname': "cpu_share",
+ 'description': "Number of CPU shares",
+ 'category': 'slice/rspec'},
+ {'tagname': "cpu_cores",
+ 'description': "Number of CPU cores",
+ 'category': 'slice/rspec'},
+ {'tagname': "cpu_freezable",
+ 'description': "Slice processes should be frozen if cpu_cores is 0",
+ 'category': 'slice/rspec'},
+
+ # Bandwidth limits
+ {'tagname': "net_min_rate",
+ 'description': "Minimum bandwidth (kbps)",
+ 'category': 'slice/rspec'},
+ {'tagname': "net_max_rate",
+ 'description': "Maximum bandwidth (kbps)",
+ 'category': 'slice/rspec'},
+ {'tagname': "net_i2_min_rate",
+ 'description': "Minimum bandwidth over I2 routes (kbps)",
+ 'category': 'slice/rspec'},
+ {'tagname': "net_i2_max_rate",
+ 'description': "Maximum bandwidth over I2 routes (kbps)",
+ 'category': 'slice/rspec'},
+ {'tagname': "net_max_kbyte",
+ 'description': "Maximum daily network Tx KByte limit.",
+ 'category': 'slice/rspec'},
+ {'tagname': "net_thresh_kbyte",
+ 'description': "KByte limit before warning and throttling.",
+ 'category': 'slice/rspec'},
+ {'tagname': "net_i2_max_kbyte",
+ 'description': "Maximum daily network Tx KByte limit to I2 hosts.",
+ 'category': 'slice/rspec'},
+ {'tagname': "net_i2_thresh_kbyte",
+ 'description': "KByte limit to I2 hosts before warning and throttling.",
+ 'category': 'slice/rspec'},
+ {'tagname': "net_share",
+ 'description': "Number of bandwidth shares",
+ 'category': 'slice/rspec'},
+ {'tagname': "net_i2_share",
+ 'description': "Number of bandwidth shares over I2 routes",
+ 'category': 'slice/rspec'},
+
+ # Disk quota
+ {'tagname': "disk_max",
+ 'description': "Disk quota (1k disk blocks)",
+ 'category': 'slice/rspec'},
+
+ # deprecated in nov. 2010
+ # Proper operations
+ # {'tagname': "proper_op",
+ # 'description': "Proper operation (e.g. bind_socket)",
+ # 'category' : 'slice/rspec'},
+
+ # VServer capabilities
+ {'tagname': "capabilities",
+ 'description': "VServer bcapabilities (separate by commas)",
+ 'category': 'slice/rspec'},
+
+ # Vsys
+ # need to allow this one so that slice can have that set from PLC_VSYS_DEFAULT
+ {'tagname': "vsys",
+ 'description': "Bind vsys script fd's to a slice's /vsys directory.",
+ 'category': 'slice/rspec',
+ 'roles': AllPersonRoles()},
+ {'tagname': "vsys_vnet",
+ 'description': """Specify the IP range that can be used in a given slice
+for virtual devices involved in topologies, e.g. 192.168.100.0/24""",
+ 'category': 'slice/rspec'},
+
+ # CoDemux
+ {'tagname': "codemux",
+ 'description': "Demux HTTP between slices using localhost ports. Value in the form 'host, localhost port'.",
+ 'category': 'slice/rspec'},
+
+ # Delegation
+ {'tagname': "delegations",
+ 'description': "Coma seperated list of slices to give delegation authority to.",
+ 'category': 'slice/rspec',
+ 'roles': ['admin', 'pi', 'user']},
+
+ # Capability to give a sliver access to unused raw disk
+ {'tagname': "rawdisk",
+ 'description': "map unused raw disk devices into the slice",
+ 'category': 'slice/access', # we should get rid of this category thing
+ 'roles': ['admin', 'pi']},
+
+ {'tagname': 'exempt_slice_until',
+ 'description': 'Exclude this slice from MyOps until given date (YYYYMMDD)',
+ 'category': 'slice/myops'},
+
+ # DistributedRateLimiting slice
+ {'tagname': "drl",
+ 'description': "Is a default Distributed Rate Limiting slice (1) or not (0 or unset)",
+ 'category': 'slice/general'},
+
+ {'tagname': 'interface',
+ 'description': 'The interface tag holds network configuration information until VirtualInterface objects are in PLCAPI',
+ 'category': 'slice/network'},
+
+ ]
import resource
# add in the platform supported rlimits to the default_attribute_types
-for entry in resource.__dict__.keys() + ["VLIMIT_OPENFD"]:
- if entry.find("LIMIT_")==1:
+for entry in list(resource.__dict__.keys()) + ["VLIMIT_OPENFD"]:
+ if entry.find("LIMIT_") == 1:
rlim = entry[len("RLIMIT_"):]
rlim = rlim.lower()
- for ty in ("min","soft","hard"):
+ for ty in ("min", "soft", "hard"):
attribute = {
- 'tagname': "%s_%s"%(rlim,ty),
- 'description': "Per sliver RLIMIT %s_%s."%(rlim,ty),
+ 'tagname': "%s_%s" % (rlim, ty),
+ 'description': "Per sliver RLIMIT %s_%s." % (rlim, ty),
'category': 'slice/limit',
- }
+ }
slicetag_types.append(attribute)
for slicetag_type in slicetag_types:
git://git.onelab.eu / plcapi.git / blobdiff