#include <linux/pm.h>
#include <linux/pci.h>
#include <linux/acpi.h>
-#ifdef CONFIG_X86_IO_APIC
-#include <asm/mpspec.h>
-#endif
-#ifdef CONFIG_IOSAPIC
-# include <asm/iosapic.h>
-#endif
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
-
#define _COMPONENT ACPI_PCI_COMPONENT
-ACPI_MODULE_NAME ("pci_irq")
-
-struct acpi_prt_list acpi_prt;
-
-#ifdef CONFIG_X86
-extern void eisa_set_level_irq(unsigned int irq);
-#endif
+ACPI_MODULE_NAME("pci_irq")
+static struct acpi_prt_list acpi_prt;
+static DEFINE_SPINLOCK(acpi_prt_lock);
/* --------------------------------------------------------------------------
PCI IRQ Routing Table (PRT) Support
-------------------------------------------------------------------------- */
-static struct acpi_prt_entry *
-acpi_pci_irq_find_prt_entry (
- int segment,
- int bus,
- int device,
- int pin)
+static struct acpi_prt_entry *acpi_pci_irq_find_prt_entry(int segment,
+ int bus,
+ int device, int pin)
{
- struct list_head *node = NULL;
- struct acpi_prt_entry *entry = NULL;
+ struct list_head *node = NULL;
+ struct acpi_prt_entry *entry = NULL;
ACPI_FUNCTION_TRACE("acpi_pci_irq_find_prt_entry");
* Parse through all PRT entries looking for a match on the specified
* PCI device's segment, bus, device, and pin (don't care about func).
*
- * TBD: Acquire/release lock
*/
+ spin_lock(&acpi_prt_lock);
list_for_each(node, &acpi_prt.entries) {
entry = list_entry(node, struct acpi_prt_entry, node);
- if ((segment == entry->id.segment)
- && (bus == entry->id.bus)
- && (device == entry->id.device)
- && (pin == entry->pin)) {
+ if ((segment == entry->id.segment)
+ && (bus == entry->id.bus)
+ && (device == entry->id.device)
+ && (pin == entry->pin)) {
+ spin_unlock(&acpi_prt_lock);
return_PTR(entry);
}
}
+ spin_unlock(&acpi_prt_lock);
return_PTR(NULL);
}
-
static int
-acpi_pci_irq_add_entry (
- acpi_handle handle,
- int segment,
- int bus,
- struct acpi_pci_routing_table *prt)
+acpi_pci_irq_add_entry(acpi_handle handle,
+ int segment, int bus, struct acpi_pci_routing_table *prt)
{
- struct acpi_prt_entry *entry = NULL;
+ struct acpi_prt_entry *entry = NULL;
ACPI_FUNCTION_TRACE("acpi_pci_irq_add_entry");
entry->link.index = prt->source_index;
ACPI_DEBUG_PRINT_RAW((ACPI_DB_INFO,
- " %02X:%02X:%02X[%c] -> %s[%d]\n",
- entry->id.segment, entry->id.bus, entry->id.device,
- ('A' + entry->pin), prt->source, entry->link.index));
+ " %02X:%02X:%02X[%c] -> %s[%d]\n",
+ entry->id.segment, entry->id.bus,
+ entry->id.device, ('A' + entry->pin), prt->source,
+ entry->link.index));
- /* TBD: Acquire/release lock */
+ spin_lock(&acpi_prt_lock);
list_add_tail(&entry->node, &acpi_prt.entries);
acpi_prt.count++;
+ spin_unlock(&acpi_prt_lock);
return_VALUE(0);
}
+static void
+acpi_pci_irq_del_entry(int segment, int bus, struct acpi_prt_entry *entry)
+{
+ if (segment == entry->id.segment && bus == entry->id.bus) {
+ acpi_prt.count--;
+ list_del(&entry->node);
+ kfree(entry);
+ }
+}
-int
-acpi_pci_irq_add_prt (
- acpi_handle handle,
- int segment,
- int bus)
+int acpi_pci_irq_add_prt(acpi_handle handle, int segment, int bus)
{
- acpi_status status = AE_OK;
- char pathname[ACPI_PATHNAME_MAX] = {0};
- struct acpi_buffer buffer = {0, NULL};
- struct acpi_pci_routing_table *prt = NULL;
- struct acpi_pci_routing_table *entry = NULL;
- static int first_time = 1;
+ acpi_status status = AE_OK;
+ char *pathname = NULL;
+ struct acpi_buffer buffer = { 0, NULL };
+ struct acpi_pci_routing_table *prt = NULL;
+ struct acpi_pci_routing_table *entry = NULL;
+ static int first_time = 1;
ACPI_FUNCTION_TRACE("acpi_pci_irq_add_prt");
+ pathname = (char *)kmalloc(ACPI_PATHNAME_MAX, GFP_KERNEL);
+ if (!pathname)
+ return_VALUE(-ENOMEM);
+ memset(pathname, 0, ACPI_PATHNAME_MAX);
+
if (first_time) {
acpi_prt.count = 0;
INIT_LIST_HEAD(&acpi_prt.entries);
* (either a PCI root bridge or PCI-PCI bridge).
*/
- buffer.length = sizeof(pathname);
+ buffer.length = ACPI_PATHNAME_MAX;
buffer.pointer = pathname;
acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
printk(KERN_DEBUG "ACPI: PCI Interrupt Routing Table [%s._PRT]\n",
- pathname);
+ pathname);
/*
* Evaluate this _PRT and add its entries to our global list (acpi_prt).
buffer.length = 0;
buffer.pointer = NULL;
+ kfree(pathname);
status = acpi_get_irq_routing_table(handle, &buffer);
if (status != AE_BUFFER_OVERFLOW) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PRT [%s]\n",
- acpi_format_exception(status)));
+ acpi_format_exception(status)));
return_VALUE(-ENODEV);
}
prt = kmalloc(buffer.length, GFP_KERNEL);
- if (!prt)
+ if (!prt) {
return_VALUE(-ENOMEM);
+ }
memset(prt, 0, buffer.length);
buffer.pointer = prt;
status = acpi_get_irq_routing_table(handle, &buffer);
if (ACPI_FAILURE(status)) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PRT [%s]\n",
- acpi_format_exception(status)));
+ acpi_format_exception(status)));
kfree(buffer.pointer);
return_VALUE(-ENODEV);
}
while (entry && (entry->length > 0)) {
acpi_pci_irq_add_entry(handle, segment, bus, entry);
entry = (struct acpi_pci_routing_table *)
- ((unsigned long) entry + entry->length);
+ ((unsigned long)entry + entry->length);
}
kfree(prt);
return_VALUE(0);
}
+void acpi_pci_irq_del_prt(int segment, int bus)
+{
+ struct list_head *node = NULL, *n = NULL;
+ struct acpi_prt_entry *entry = NULL;
+
+ if (!acpi_prt.count) {
+ return;
+ }
+
+ printk(KERN_DEBUG
+ "ACPI: Delete PCI Interrupt Routing Table for %x:%x\n", segment,
+ bus);
+ spin_lock(&acpi_prt_lock);
+ list_for_each_safe(node, n, &acpi_prt.entries) {
+ entry = list_entry(node, struct acpi_prt_entry, node);
+
+ acpi_pci_irq_del_entry(segment, bus, entry);
+ }
+ spin_unlock(&acpi_prt_lock);
+}
/* --------------------------------------------------------------------------
PCI Interrupt Routing Support
-------------------------------------------------------------------------- */
+typedef int (*irq_lookup_func) (struct acpi_prt_entry *, int *, int *, char **);
+
+static int
+acpi_pci_allocate_irq(struct acpi_prt_entry *entry,
+ int *triggering, int *polarity, char **link)
+{
+ int irq;
+
+ ACPI_FUNCTION_TRACE("acpi_pci_allocate_irq");
+
+ if (entry->link.handle) {
+ irq = acpi_pci_link_allocate_irq(entry->link.handle,
+ entry->link.index, triggering,
+ polarity, link);
+ if (irq < 0) {
+ ACPI_DEBUG_PRINT((ACPI_DB_WARN,
+ "Invalid IRQ link routing entry\n"));
+ return_VALUE(-1);
+ }
+ } else {
+ irq = entry->link.index;
+ *triggering = ACPI_LEVEL_SENSITIVE;
+ *polarity = ACPI_ACTIVE_LOW;
+ }
-int
-acpi_pci_irq_lookup (struct pci_bus *bus, int device, int pin)
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found IRQ %d\n", irq));
+ return_VALUE(irq);
+}
+
+static int
+acpi_pci_free_irq(struct acpi_prt_entry *entry,
+ int *triggering, int *polarity, char **link)
{
- struct acpi_prt_entry *entry = NULL;
+ int irq;
+
+ ACPI_FUNCTION_TRACE("acpi_pci_free_irq");
+ if (entry->link.handle) {
+ irq = acpi_pci_link_free_irq(entry->link.handle);
+ } else {
+ irq = entry->link.index;
+ }
+ return_VALUE(irq);
+}
+
+/*
+ * acpi_pci_irq_lookup
+ * success: return IRQ >= 0
+ * failure: return -1
+ */
+static int
+acpi_pci_irq_lookup(struct pci_bus *bus,
+ int device,
+ int pin,
+ int *triggering,
+ int *polarity, char **link, irq_lookup_func func)
+{
+ struct acpi_prt_entry *entry = NULL;
int segment = pci_domain_nr(bus);
int bus_nr = bus->number;
+ int ret;
ACPI_FUNCTION_TRACE("acpi_pci_irq_lookup");
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Searching for PRT entry for %02x:%02x:%02x[%c]\n",
- segment, bus_nr, device, ('A' + pin)));
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Searching for PRT entry for %02x:%02x:%02x[%c]\n",
+ segment, bus_nr, device, ('A' + pin)));
- entry = acpi_pci_irq_find_prt_entry(segment, bus_nr, device, pin);
+ entry = acpi_pci_irq_find_prt_entry(segment, bus_nr, device, pin);
if (!entry) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "PRT entry not found\n"));
- return_VALUE(0);
+ return_VALUE(-1);
}
- if (!entry->irq && entry->link.handle) {
- entry->irq = acpi_pci_link_get_irq(entry->link.handle, entry->link.index, NULL, NULL);
- if (!entry->irq) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Invalid IRQ link routing entry\n"));
- return_VALUE(0);
- }
- }
- else if (!entry->irq) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Invalid static routing entry (IRQ 0)\n"));
- return_VALUE(0);
- }
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found IRQ %d\n", entry->irq));
-
- return_VALUE(entry->irq);
+ ret = func(entry, triggering, polarity, link);
+ return_VALUE(ret);
}
+/*
+ * acpi_pci_irq_derive
+ * success: return IRQ >= 0
+ * failure: return < 0
+ */
static int
-acpi_pci_irq_derive (
- struct pci_dev *dev,
- int pin)
+acpi_pci_irq_derive(struct pci_dev *dev,
+ int pin,
+ int *triggering,
+ int *polarity, char **link, irq_lookup_func func)
{
- struct pci_dev *bridge = dev;
- int irq = 0;
- u8 bridge_pin = 0;
+ struct pci_dev *bridge = dev;
+ int irq = -1;
+ u8 bridge_pin = 0;
ACPI_FUNCTION_TRACE("acpi_pci_irq_derive");
* Attempt to derive an IRQ for this device from a parent bridge's
* PCI interrupt routing entry (eg. yenta bridge and add-in card bridge).
*/
- while (!irq && bridge->bus->self) {
+ while (irq < 0 && bridge->bus->self) {
pin = (pin + PCI_SLOT(bridge->devfn)) % 4;
bridge = bridge->bus->self;
if ((bridge->class >> 8) == PCI_CLASS_BRIDGE_CARDBUS) {
/* PC card has the same IRQ as its cardbridge */
- pci_read_config_byte(bridge, PCI_INTERRUPT_PIN, &bridge_pin);
+ bridge_pin = bridge->pin;
if (!bridge_pin) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "No interrupt pin configured for device %s\n", pci_name(bridge)));
- return_VALUE(0);
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "No interrupt pin configured for device %s\n",
+ pci_name(bridge)));
+ return_VALUE(-1);
}
/* Pin is from 0 to 3 */
- bridge_pin --;
+ bridge_pin--;
pin = bridge_pin;
}
- irq = acpi_pci_irq_lookup(bridge->bus,
- PCI_SLOT(bridge->devfn), pin);
+ irq = acpi_pci_irq_lookup(bridge->bus, PCI_SLOT(bridge->devfn),
+ pin, triggering, polarity,
+ link, func);
}
- if (!irq) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Unable to derive IRQ for device %s\n", pci_name(dev)));
- return_VALUE(0);
+ if (irq < 0) {
+ ACPI_DEBUG_PRINT((ACPI_DB_WARN,
+ "Unable to derive IRQ for device %s\n",
+ pci_name(dev)));
+ return_VALUE(-1);
}
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Derive IRQ %d for device %s from %s\n",
- irq, pci_name(dev), pci_name(bridge)));
+ irq, pci_name(dev), pci_name(bridge)));
return_VALUE(irq);
}
+/*
+ * acpi_pci_irq_enable
+ * success: return 0
+ * failure: return < 0
+ */
-int
-acpi_pci_irq_enable (
- struct pci_dev *dev)
+int acpi_pci_irq_enable(struct pci_dev *dev)
{
- int irq = 0;
- u8 pin = 0;
+ int irq = 0;
+ u8 pin = 0;
+ int triggering = ACPI_LEVEL_SENSITIVE;
+ int polarity = ACPI_ACTIVE_LOW;
+ char *link = NULL;
+ int rc;
ACPI_FUNCTION_TRACE("acpi_pci_irq_enable");
if (!dev)
return_VALUE(-EINVAL);
-
- pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+
+ pin = dev->pin;
if (!pin) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No interrupt pin configured for device %s\n", pci_name(dev)));
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "No interrupt pin configured for device %s\n",
+ pci_name(dev)));
return_VALUE(0);
}
pin--;
if (!dev->bus) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid (NULL) 'bus' field\n"));
+ ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+ "Invalid (NULL) 'bus' field\n"));
return_VALUE(-ENODEV);
}
* First we check the PCI IRQ routing table (PRT) for an IRQ. PRT
* values override any BIOS-assigned IRQs set during boot.
*/
- irq = acpi_pci_irq_lookup(dev->bus, PCI_SLOT(dev->devfn), pin);
+ irq = acpi_pci_irq_lookup(dev->bus, PCI_SLOT(dev->devfn), pin,
+ &triggering, &polarity, &link,
+ acpi_pci_allocate_irq);
/*
* If no PRT entry was found, we'll try to derive an IRQ from the
* device's parent bridge.
*/
- if (!irq)
- irq = acpi_pci_irq_derive(dev, pin);
-
+ if (irq < 0)
+ irq = acpi_pci_irq_derive(dev, pin, &triggering,
+ &polarity, &link,
+ acpi_pci_allocate_irq);
+
/*
* No IRQ known to the ACPI subsystem - maybe the BIOS /
* driver reported one, then use it. Exit in any case.
*/
- if (!irq) {
- printk(KERN_WARNING PREFIX "No IRQ known for interrupt pin %c of device %s", ('A' + pin), pci_name(dev));
+ if (irq < 0) {
+ printk(KERN_WARNING PREFIX "PCI Interrupt %s[%c]: no GSI",
+ pci_name(dev), ('A' + pin));
/* Interrupt Line values above 0xF are forbidden */
- if (dev->irq && (dev->irq <= 0xF)) {
+ if (dev->irq > 0 && (dev->irq <= 0xF)) {
printk(" - using IRQ %d\n", dev->irq);
- return_VALUE(dev->irq);
- }
- else {
+ acpi_register_gsi(dev->irq, ACPI_LEVEL_SENSITIVE,
+ ACPI_ACTIVE_LOW);
+ return_VALUE(0);
+ } else {
printk("\n");
return_VALUE(0);
}
- }
+ }
- dev->irq = irq;
+ rc = acpi_register_gsi(irq, triggering, polarity);
+ if (rc < 0) {
+ printk(KERN_WARNING PREFIX "PCI Interrupt %s[%c]: failed "
+ "to register GSI\n", pci_name(dev), ('A' + pin));
+ return_VALUE(rc);
+ }
+ dev->irq = rc;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device %s using IRQ %d\n", pci_name(dev), dev->irq));
+ printk(KERN_INFO PREFIX "PCI Interrupt %s[%c] -> ",
+ pci_name(dev), 'A' + pin);
- /*
- * Make sure all (legacy) PCI IRQs are set as level-triggered.
- */
-#ifdef CONFIG_X86
- {
- static u16 irq_mask;
- if ((dev->irq < 16) && !((1 << dev->irq) & irq_mask)) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Setting IRQ %d as level-triggered\n", dev->irq));
- irq_mask |= (1 << dev->irq);
- eisa_set_level_irq(dev->irq);
- }
- }
-#endif
-#ifdef CONFIG_IOSAPIC
- if (acpi_irq_model == ACPI_IRQ_MODEL_IOSAPIC)
- iosapic_enable_intr(dev->irq);
-#endif
+ if (link)
+ printk("Link [%s] -> ", link);
- return_VALUE(dev->irq);
+ printk("GSI %u (%s, %s) -> IRQ %d\n", irq,
+ (triggering == ACPI_LEVEL_SENSITIVE) ? "level" : "edge",
+ (polarity == ACPI_ACTIVE_LOW) ? "low" : "high", dev->irq);
+
+ return_VALUE(0);
}
+EXPORT_SYMBOL(acpi_pci_irq_enable);
-int __init
-acpi_pci_irq_init (void)
+/* FIXME: implement x86/x86_64 version */
+void __attribute__ ((weak)) acpi_unregister_gsi(u32 i)
{
- struct pci_dev *dev = NULL;
+}
- ACPI_FUNCTION_TRACE("acpi_pci_irq_init");
+void acpi_pci_irq_disable(struct pci_dev *dev)
+{
+ int gsi = 0;
+ u8 pin = 0;
+ int triggering = ACPI_LEVEL_SENSITIVE;
+ int polarity = ACPI_ACTIVE_LOW;
- if (!acpi_prt.count) {
- printk(KERN_WARNING PREFIX "ACPI tables contain no PCI IRQ "
- "routing entries\n");
- return_VALUE(-ENODEV);
- }
+ ACPI_FUNCTION_TRACE("acpi_pci_irq_disable");
- /* Make sure all link devices have a valid IRQ. */
- if (acpi_pci_link_check()) {
- return_VALUE(-ENODEV);
- }
+ if (!dev || !dev->bus)
+ return_VOID;
+
+ pin = dev->pin;
+ if (!pin)
+ return_VOID;
+ pin--;
+
+ /*
+ * First we check the PCI IRQ routing table (PRT) for an IRQ.
+ */
+ gsi = acpi_pci_irq_lookup(dev->bus, PCI_SLOT(dev->devfn), pin,
+ &triggering, &polarity, NULL,
+ acpi_pci_free_irq);
+ /*
+ * If no PRT entry was found, we'll try to derive an IRQ from the
+ * device's parent bridge.
+ */
+ if (gsi < 0)
+ gsi = acpi_pci_irq_derive(dev, pin,
+ &triggering, &polarity, NULL,
+ acpi_pci_free_irq);
+ if (gsi < 0)
+ return_VOID;
-#ifdef CONFIG_X86_IO_APIC
- /* Program IOAPICs using data from PRT entries. */
- if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC)
- mp_parse_prt();
-#endif
-#ifdef CONFIG_IOSAPIC
- if (acpi_irq_model == ACPI_IRQ_MODEL_IOSAPIC)
- iosapic_parse_prt();
-#endif
+ /*
+ * TBD: It might be worth clearing dev->irq by magic constant
+ * (e.g. PCI_UNDEFINED_IRQ).
+ */
- while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL)
- acpi_pci_irq_enable(dev);
+ printk(KERN_INFO PREFIX "PCI interrupt for device %s disabled\n",
+ pci_name(dev));
- return_VALUE(0);
+ acpi_unregister_gsi(gsi);
+
+ return_VOID;
}
git://git.onelab.eu / linux-2.6.git / blobdiff