#include <linux/sched.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <asm/byteorder.h>
#include <asm/uaccess.h>
#undef USE_RBPL_POOL /* if memory is tight try this */
#define USE_TPD_POOL
/* #undef CONFIG_ATM_HE_USE_SUNI */
-
-/* compatibility */
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,69)
-typedef void irqreturn_t;
-#define IRQ_NONE
-#define IRQ_HANDLED
-#define IRQ_RETVAL(x)
-#endif
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,9)
-#define __devexit_p(func) func
-#endif
-
-#ifndef MODULE_LICENSE
-#define MODULE_LICENSE(x)
-#endif
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3)
-#define pci_set_drvdata(pci_dev, data) (pci_dev)->driver_data = (data)
-#define pci_get_drvdata(pci_dev) (pci_dev)->driver_data
-#endif
+/* #undef HE_DEBUG */
#include "he.h"
-
#include "suni.h"
-
#include <linux/atm_he.h>
#define hprintk(fmt,args...) printk(KERN_ERR DEV_LABEL "%d: " fmt, he_dev->number , ##args)
-#undef DEBUG
-#ifdef DEBUG
+#ifdef HE_DEBUG
#define HPRINTK(fmt,args...) printk(KERN_DEBUG DEV_LABEL "%d: " fmt, he_dev->number , ##args)
-#else
+#else /* !HE_DEBUG */
#define HPRINTK(fmt,args...) do { } while (0)
-#endif /* DEBUG */
-
+#endif /* HE_DEBUG */
/* version definition */
/* globals */
-struct he_dev *he_devs = NULL;
-static int disable64 = 0;
+static struct he_dev *he_devs;
+static int disable64;
static short nvpibits = -1;
static short nvcibits = -1;
static short rx_skb_reserve = 16;
static int irq_coalesce = 1;
static int sdh = 0;
+/* Read from EEPROM = 0000 0011b */
+static unsigned int readtab[] = {
+ CS_HIGH | CLK_HIGH,
+ CS_LOW | CLK_LOW,
+ CLK_HIGH, /* 0 */
+ CLK_LOW,
+ CLK_HIGH, /* 0 */
+ CLK_LOW,
+ CLK_HIGH, /* 0 */
+ CLK_LOW,
+ CLK_HIGH, /* 0 */
+ CLK_LOW,
+ CLK_HIGH, /* 0 */
+ CLK_LOW,
+ CLK_HIGH, /* 0 */
+ CLK_LOW | SI_HIGH,
+ CLK_HIGH | SI_HIGH, /* 1 */
+ CLK_LOW | SI_HIGH,
+ CLK_HIGH | SI_HIGH /* 1 */
+};
+
+/* Clock to read from/write to the EEPROM */
+static unsigned int clocktab[] = {
+ CLK_LOW,
+ CLK_HIGH,
+ CLK_LOW,
+ CLK_HIGH,
+ CLK_LOW,
+ CLK_HIGH,
+ CLK_LOW,
+ CLK_HIGH,
+ CLK_LOW,
+ CLK_HIGH,
+ CLK_LOW,
+ CLK_HIGH,
+ CLK_LOW,
+ CLK_HIGH,
+ CLK_LOW,
+ CLK_HIGH,
+ CLK_LOW
+};
+
static struct atmdev_ops he_ops =
{
.open = he_open,
if (pci_enable_device(pci_dev))
return -EIO;
- if (pci_set_dma_mask(pci_dev, HE_DMA_MASK) != 0) {
+ if (pci_set_dma_mask(pci_dev, DMA_32BIT_MASK) != 0) {
printk(KERN_WARNING "he: no suitable dma available\n");
err = -EIO;
goto init_one_failure;
init_one_failure:
if (atm_dev)
atm_dev_deregister(atm_dev);
- if (he_dev)
- kfree(he_dev);
+ kfree(he_dev);
pci_disable_device(pci_dev);
return err;
}
open_failed:
if (err) {
- if (he_vcc)
- kfree(he_vcc);
+ kfree(he_vcc);
clear_bit(ATM_VF_ADDR, &vcc->flags);
}
else
udelay(250);
}
- add_wait_queue(&he_vcc->rx_waitq, &wait);
set_current_state(TASK_UNINTERRUPTIBLE);
+ add_wait_queue(&he_vcc->rx_waitq, &wait);
he_writel_rsr0(he_dev, RSR0_CLOSE_CONN, cid);
(void) he_readl_rsr0(he_dev, cid); /* flush posted writes */
* TBRQ, the host issues the close command to the adapter.
*/
- while (((tx_inuse = atomic_read(&vcc->sk->sk_wmem_alloc)) > 0) &&
+ while (((tx_inuse = atomic_read(&sk_atm(vcc)->sk_wmem_alloc)) > 0) &&
(retry < MAX_RETRY)) {
msleep(sleep);
if (sleep < 250)
tpd->vcc = vcc;
wmb();
- add_wait_queue(&he_vcc->tx_waitq, &wait);
set_current_state(TASK_UNINTERRUPTIBLE);
+ add_wait_queue(&he_vcc->tx_waitq, &wait);
__enqueue_tpd(he_dev, tpd, cid);
spin_unlock_irqrestore(&he_dev->global_lock, flags);
static int __init he_init(void)
{
- return pci_module_init(&he_driver);
+ return pci_register_driver(&he_driver);
}
static void __exit he_cleanup(void)