*/
#include <linux/device.h>
+#include <linux/string.h>
#include "power.h"
*
* show() returns the current power state of the device. '0' indicates
* the device is on. Other values (1-3) indicate the device is in a low
- * power state.
+ * power state.
*
- * store() sets the current power state, which is an integer value
- * between 0-3. If the device is on ('0'), and the value written is
+ * store() sets the current power state, which is an integer value
+ * between 0-3. If the device is on ('0'), and the value written is
* greater than 0, then the device is placed directly into the low-power
* state (via its driver's ->suspend() method).
* If the device is currently in a low-power state, and the value is 0,
* low-power state.
*/
-static ssize_t state_show(struct device * dev, char * buf)
+static ssize_t state_show(struct device * dev, struct device_attribute *attr, char * buf)
{
- return sprintf(buf,"%u\n",dev->power.power_state);
+ if (dev->power.power_state.event)
+ return sprintf(buf, "2\n");
+ else
+ return sprintf(buf, "0\n");
}
-static ssize_t state_store(struct device * dev, const char * buf, size_t n)
+static ssize_t state_store(struct device * dev, struct device_attribute *attr, const char * buf, size_t n)
{
- u32 state;
- char * rest;
- int error = 0;
+ pm_message_t state;
+ int error = -EINVAL;
- state = simple_strtoul(buf,&rest,10);
- if (*rest)
- return -EINVAL;
- if (state)
- error = dpm_runtime_suspend(dev,state);
- else
+ state.event = PM_EVENT_SUSPEND;
+ /* Older apps expected to write "3" here - confused with PCI D3 */
+ if ((n == 1) && !strcmp(buf, "3"))
+ error = dpm_runtime_suspend(dev, state);
+
+ if ((n == 1) && !strcmp(buf, "2"))
+ error = dpm_runtime_suspend(dev, state);
+
+ if ((n == 1) && !strcmp(buf, "0")) {
dpm_runtime_resume(dev);
+ error = 0;
+ }
+
return error ? error : n;
}
-static DEVICE_ATTR(state,0644,state_show,state_store);
+static DEVICE_ATTR(state, 0644, state_show, state_store);
+
+
+/*
+ * wakeup - Report/change current wakeup option for device
+ *
+ * Some devices support "wakeup" events, which are hardware signals
+ * used to activate devices from suspended or low power states. Such
+ * devices have one of three values for the sysfs power/wakeup file:
+ *
+ * + "enabled\n" to issue the events;
+ * + "disabled\n" not to do so; or
+ * + "\n" for temporary or permanent inability to issue wakeup.
+ *
+ * (For example, unconfigured USB devices can't issue wakeups.)
+ *
+ * Familiar examples of devices that can issue wakeup events include
+ * keyboards and mice (both PS2 and USB styles), power buttons, modems,
+ * "Wake-On-LAN" Ethernet links, GPIO lines, and more. Some events
+ * will wake the entire system from a suspend state; others may just
+ * wake up the device (if the system as a whole is already active).
+ * Some wakeup events use normal IRQ lines; other use special out
+ * of band signaling.
+ *
+ * It is the responsibility of device drivers to enable (or disable)
+ * wakeup signaling as part of changing device power states, respecting
+ * the policy choices provided through the driver model.
+ *
+ * Devices may not be able to generate wakeup events from all power
+ * states. Also, the events may be ignored in some configurations;
+ * for example, they might need help from other devices that aren't
+ * active, or which may have wakeup disabled. Some drivers rely on
+ * wakeup events internally (unless they are disabled), keeping
+ * their hardware in low power modes whenever they're unused. This
+ * saves runtime power, without requiring system-wide sleep states.
+ */
+
+static const char enabled[] = "enabled";
+static const char disabled[] = "disabled";
+
+static ssize_t
+wake_show(struct device * dev, struct device_attribute *attr, char * buf)
+{
+ return sprintf(buf, "%s\n", device_can_wakeup(dev)
+ ? (device_may_wakeup(dev) ? enabled : disabled)
+ : "");
+}
+
+static ssize_t
+wake_store(struct device * dev, struct device_attribute *attr,
+ const char * buf, size_t n)
+{
+ char *cp;
+ int len = n;
+
+ if (!device_can_wakeup(dev))
+ return -EINVAL;
+
+ cp = memchr(buf, '\n', n);
+ if (cp)
+ len = cp - buf;
+ if (len == sizeof enabled - 1
+ && strncmp(buf, enabled, sizeof enabled - 1) == 0)
+ device_set_wakeup_enable(dev, 1);
+ else if (len == sizeof disabled - 1
+ && strncmp(buf, disabled, sizeof disabled - 1) == 0)
+ device_set_wakeup_enable(dev, 0);
+ else
+ return -EINVAL;
+ return n;
+}
+
+static DEVICE_ATTR(wakeup, 0644, wake_show, wake_store);
static struct attribute * power_attrs[] = {
&dev_attr_state.attr,
+ &dev_attr_wakeup.attr,
NULL,
};
static struct attribute_group pm_attr_group = {
int dpm_sysfs_add(struct device * dev)
{
- return sysfs_create_group(&dev->kobj,&pm_attr_group);
+ return sysfs_create_group(&dev->kobj, &pm_attr_group);
}
void dpm_sysfs_remove(struct device * dev)
{
- sysfs_remove_group(&dev->kobj,&pm_attr_group);
+ sysfs_remove_group(&dev->kobj, &pm_attr_group);
}