# Block device driver configuration
#
+if BLOCK
+
menu "Block devices"
config BLK_DEV_FD
tristate "Normal floppy disk support"
- depends on (!ARCH_S390 && !M68K && !IA64 && !UML && !ARM) || Q40 || (SUN3X && BROKEN) || ARCH_RPC || ARCH_EBSA285
+ depends on ARCH_MAY_HAVE_PC_FDC
---help---
If you want to use the floppy disk drive(s) of your PC under Linux,
say Y. Information about this driver, especially important for IBM
tristate "Atari floppy support"
depends on ATARI
-config BLK_DEV_SWIM_IOP
- bool "Macintosh IIfx/Quadra 900/Quadra 950 floppy support (EXPERIMENTAL)"
- depends on MAC && EXPERIMENTAL && BROKEN
- help
- Say Y here to support the SWIM (Super Woz Integrated Machine) IOP
- floppy controller on the Macintosh IIfx and Quadra 900/950.
-
config MAC_FLOPPY
tristate "Support for PowerMac floppy"
depends on PPC_PMAC && !PPC_PMAC64
config PARIDE
tristate "Parallel port IDE device support"
- depends on PARPORT
+ depends on PARPORT_PC
---help---
There are many external CD-ROM and disk devices that connect through
your computer's parallel port. Most of them are actually IDE devices
config CISS_SCSI_TAPE
bool "SCSI tape drive support for Smart Array 5xxx"
- depends on BLK_CPQ_CISS_DA && SCSI && PROC_FS
+ depends on BLK_CPQ_CISS_DA && PROC_FS
+ depends on SCSI=y || SCSI=BLK_CPQ_CISS_DA
help
When enabled (Y), this option allows SCSI tape drives and SCSI medium
changers (tape robots) to be accessed via a Compaq 5xxx array
module will be called umem.
The umem driver has not yet been allocated a MAJOR number, so
- one is chosen dynamically. Use "devfs" or look in /proc/devices
- for the device number
+ one is chosen dynamically.
config BLK_DEV_UBD
bool "Virtual block device"
config BLK_DEV_CRYPTOLOOP
tristate "Cryptoloop Support"
select CRYPTO
+ select CRYPTO_CBC
depends on BLK_DEV_LOOP
---help---
Say Y here if you want to be able to use the ciphers that are
config BLK_DEV_VROOT
tristate "Virtual Root device support"
+ depends on QUOTACTL
---help---
Saying Y here will allow you to use quota/fs ioctls on a shared
partition within a virtual server without compromising security.
This driver supports certain USB attached storage devices
such as flash keys.
- Warning: Enabling this cripples the usb-storage driver.
+ If you enable this driver, it is recommended to avoid conflicts
+ with usb-storage by enabling USB_LIBUSUAL.
If unsure, say N.
thus say N here.
config BLK_DEV_RAM_COUNT
- int "Default number of RAM disks" if BLK_DEV_RAM
+ int "Default number of RAM disks"
default "16"
+ depends on BLK_DEV_RAM
help
The default value is 16 RAM disks. Change this if you know what
are doing. If you boot from a filesystem that needs to be extracted
what are you doing. If you are using IBM S/390, then set this to
8192.
-config BLK_DEV_INITRD
- bool "Initial RAM disk (initrd) support"
- depends on BLK_DEV_RAM=y
- help
- The initial RAM disk is a RAM disk that is loaded by the boot loader
- (loadlin or lilo) and that is mounted as root before the normal boot
- procedure. It is typically used to load modules needed to mount the
- "real" root file system, etc. See <file:Documentation/initrd.txt>
- for details.
-
-config INITRAMFS_SOURCE
- string "Initramfs source file(s)"
- default ""
+config BLK_DEV_RAM_BLOCKSIZE
+ int "Default RAM disk block size (bytes)"
+ depends on BLK_DEV_RAM
+ default "1024"
help
- This can be either a single cpio archive with a .cpio suffix or a
- space-separated list of directories and files for building the
- initramfs image. A cpio archive should contain a filesystem archive
- to be used as an initramfs image. Directories should contain a
- filesystem layout to be included in the initramfs image. Files
- should contain entries according to the format described by the
- "usr/gen_init_cpio" program in the kernel tree.
-
- When multiple directories and files are specified then the
- initramfs image will be the aggregate of all of them.
-
- See <file:Documentation/early-userspace/README for more details.
+ The default value is 1024 bytes. PAGE_SIZE is a much more
+ efficient choice however. The default is kept to ensure initrd
+ setups function - apparently needed by the rd_load_image routine
+ that supposes the filesystem in the image uses a 1024 blocksize.
- If you are not sure, leave it blank.
-
-config INITRAMFS_ROOT_UID
- int "User ID to map to 0 (user root)"
- depends on INITRAMFS_SOURCE!=""
- default "0"
+config BLK_DEV_INITRD
+ bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
+ depends on BROKEN || !FRV
help
- This setting is only meaningful if the INITRAMFS_SOURCE is
- contains a directory. Setting this user ID (UID) to something
- other than "0" will cause all files owned by that UID to be
- owned by user root in the initial ramdisk image.
+ The initial RAM filesystem is a ramfs which is loaded by the
+ boot loader (loadlin or lilo) and that is mounted as root
+ before the normal boot procedure. It is typically used to
+ load modules needed to mount the "real" root file system,
+ etc. See <file:Documentation/initrd.txt> for details.
- If you are not sure, leave it set to "0".
+ If RAM disk support (BLK_DEV_RAM) is also included, this
+ also enables initial RAM disk (initrd) support.
-config INITRAMFS_ROOT_GID
- int "Group ID to map to 0 (group root)"
- depends on INITRAMFS_SOURCE!=""
- default "0"
- help
- This setting is only meaningful if the INITRAMFS_SOURCE is
- contains a directory. Setting this group ID (GID) to something
- other than "0" will cause all files owned by that GID to be
- owned by group root in the initial ramdisk image.
-
- If you are not sure, leave it set to "0".
-
-#XXX - it makes sense to enable this only for 32-bit subarch's, not for x86_64
-#for instance.
-config LBD
- bool "Support for Large Block Devices"
- depends on X86 || MIPS32 || PPC32 || ARCH_S390_31 || SUPERH || UML
- help
- Say Y here if you want to attach large (bigger than 2TB) discs to
- your machine, or if you want to have a raid or loopback device
- bigger than 2TB. Otherwise say N.
config CDROM_PKTCDVD
tristate "Packet writing on CD/DVD media"
depends on !UML
help
- If you have a CDROM drive that supports packet writing, say Y to
- include preliminary support. It should work with any MMC/Mt Fuji
- compliant ATAPI or SCSI drive, which is just about any newer CD
- writer.
+ If you have a CDROM/DVD drive that supports packet writing, say
+ Y to include support. It should work with any MMC/Mt Fuji
+ compliant ATAPI or SCSI drive, which is just about any newer
+ DVD/CD writer.
- Currently only writing to CD-RW, DVD-RW and DVD+RW discs is possible.
+ Currently only writing to CD-RW, DVD-RW, DVD+RW and DVDRAM discs
+ is possible.
DVD-RW disks must be in restricted overwrite mode.
+ See the file <file:Documentation/cdrom/packet-writing.txt>
+ for further information on the use of this driver.
+
To compile this driver as a module, choose M here: the
module will be called pktcdvd.
This controls the maximum number of active concurrent packets. More
concurrent packets can increase write performance, but also require
more memory. Each concurrent packet will require approximately 64Kb
- of non-swappable kernel memory, memory which will be allocated at
- pktsetup time.
+ of non-swappable kernel memory, memory which will be allocated when
+ a disc is opened for writing.
config CDROM_PKTCDVD_WCACHE
- bool "Enable write caching"
- depends on CDROM_PKTCDVD
+ bool "Enable write caching (EXPERIMENTAL)"
+ depends on CDROM_PKTCDVD && EXPERIMENTAL
help
If enabled, write caching will be set for the CD-R/W device. For now
this option is dangerous unless the CD-RW media is known good, as we
source "drivers/s390/block/Kconfig"
-source "drivers/block/Kconfig.iosched"
-
config ATA_OVER_ETH
tristate "ATA over Ethernet support"
depends on NET
devices like the Coraid EtherDrive (R) Storage Blade.
endmenu
+
+endif