/*
* Disk Array driver for HP SA 5xxx and 6xxx Controllers
- * Copyright 2000, 2002 Hewlett-Packard Development Company, L.P.
+ * Copyright 2000, 2006 Hewlett-Packard Development Company, L.P.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Questions/Comments/Bugfixes to Cciss-discuss@lists.sourceforge.net
+ * Questions/Comments/Bugfixes to iss_storagedev@hp.com
*
*/
#include <linux/init.h>
#include <linux/hdreg.h>
#include <linux/spinlock.h>
+#include <linux/compat.h>
+#include <linux/blktrace_api.h>
#include <asm/uaccess.h>
#include <asm/io.h>
+#include <linux/dma-mapping.h>
#include <linux/blkdev.h>
#include <linux/genhd.h>
#include <linux/completion.h>
#define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
-#define DRIVER_NAME "Compaq CISS Driver (v 2.6.2)"
-#define DRIVER_VERSION CCISS_DRIVER_VERSION(2,6,2)
+#define DRIVER_NAME "HP CISS Driver (v 2.6.10)"
+#define DRIVER_VERSION CCISS_DRIVER_VERSION(2,6,10)
/* Embedded module documentation macros - see modules.h */
MODULE_AUTHOR("Hewlett-Packard Company");
-MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 2.6.2");
+MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 2.6.10");
MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400"
- " SA6i");
+ " SA6i P600 P800 P400 P400i E200 E200i");
MODULE_LICENSE("GPL");
+MODULE_VERSION("2.6.8");
#include "cciss_cmd.h"
#include "cciss.h"
#include <linux/cciss_ioctl.h>
/* define the PCI info for the cards we can control */
-const struct pci_device_id cciss_pci_device_id[] = {
+static const struct pci_device_id cciss_pci_device_id[] = {
{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISS,
0x0E11, 0x4070, 0, 0, 0},
{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB,
0x0E11, 0x409D, 0, 0, 0},
{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC,
0x0E11, 0x4091, 0, 0, 0},
- { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC,
- 0x0E11, 0x409E, 0, 0, 0},
- { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC,
- 0x103C, 0x3211, 0, 0, 0},
+ { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSA,
+ 0x103C, 0x3225, 0, 0, 0},
+ { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC,
+ 0x103c, 0x3223, 0, 0, 0},
+ { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC,
+ 0x103c, 0x3234, 0, 0, 0},
+ { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC,
+ 0x103c, 0x3235, 0, 0, 0},
+ { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD,
+ 0x103c, 0x3211, 0, 0, 0},
+ { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD,
+ 0x103c, 0x3212, 0, 0, 0},
+ { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD,
+ 0x103c, 0x3213, 0, 0, 0},
+ { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD,
+ 0x103c, 0x3214, 0, 0, 0},
+ { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD,
+ 0x103c, 0x3215, 0, 0, 0},
{0,}
};
MODULE_DEVICE_TABLE(pci, cciss_pci_device_id);
-#define NR_PRODUCTS (sizeof(products)/sizeof(struct board_type))
+#define NR_PRODUCTS ARRAY_SIZE(products)
/* board_id = Subsystem Device ID & Vendor ID
* product = Marketing Name for the board
{ 0x409C0E11, "Smart Array 6400", &SA5_access},
{ 0x409D0E11, "Smart Array 6400 EM", &SA5_access},
{ 0x40910E11, "Smart Array 6i", &SA5_access},
- { 0x409E0E11, "Smart Array 6422", &SA5_access},
- { 0x3211103C, "Smart Array V100", &SA5_access},
+ { 0x3225103C, "Smart Array P600", &SA5_access},
+ { 0x3223103C, "Smart Array P800", &SA5_access},
+ { 0x3234103C, "Smart Array P400", &SA5_access},
+ { 0x3235103C, "Smart Array P400i", &SA5_access},
+ { 0x3211103C, "Smart Array E200i", &SA5_access},
+ { 0x3212103C, "Smart Array E200", &SA5_access},
+ { 0x3213103C, "Smart Array E200i", &SA5_access},
+ { 0x3214103C, "Smart Array E200i", &SA5_access},
+ { 0x3215103C, "Smart Array E200i", &SA5_access},
};
/* How long to wait (in millesconds) for board to go into simple mode */
/*define how many times we will try a command because of bus resets */
#define MAX_CMD_RETRIES 3
-#define READ_AHEAD 256
+#define READ_AHEAD 1024
#define NR_CMDS 384 /* #commands that can be outstanding */
-#define MAX_CTLR 8
+#define MAX_CTLR 32
+
+/* Originally cciss driver only supports 8 major numbers */
+#define MAX_CTLR_ORIG 8
-#define CCISS_DMA_MASK 0xFFFFFFFF /* 32 bit DMA */
static ctlr_info_t *hba[MAX_CTLR];
static void do_cciss_request(request_queue_t *q);
+static irqreturn_t do_cciss_intr(int irq, void *dev_id, struct pt_regs *regs);
static int cciss_open(struct inode *inode, struct file *filep);
static int cciss_release(struct inode *inode, struct file *filep);
static int cciss_ioctl(struct inode *inode, struct file *filep,
unsigned int cmd, unsigned long arg);
+static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo);
static int revalidate_allvol(ctlr_info_t *host);
static int cciss_revalidate(struct gendisk *disk);
-static int deregister_disk(struct gendisk *disk);
-static int register_new_disk(ctlr_info_t *h);
+static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk);
+static int deregister_disk(struct gendisk *disk, drive_info_struct *drv, int clear_all);
+static void cciss_read_capacity(int ctlr, int logvol, ReadCapdata_struct *buf,
+ int withirq, unsigned int *total_size, unsigned int *block_size);
+static void cciss_geometry_inquiry(int ctlr, int logvol,
+ int withirq, unsigned int total_size,
+ unsigned int block_size, InquiryData_struct *inq_buff,
+ drive_info_struct *drv);
static void cciss_getgeometry(int cntl_num);
-
-static inline void addQ(CommandList_struct **Qptr, CommandList_struct *c);
+static void __devinit cciss_interrupt_mode(ctlr_info_t *, struct pci_dev *, __u32);
static void start_io( ctlr_info_t *h);
static int sendcmd( __u8 cmd, int ctlr, void *buff, size_t size,
unsigned int use_unit_num, unsigned int log_unit, __u8 page_code,
unsigned char *scsi3addr, int cmd_type);
+static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size,
+ unsigned int use_unit_num, unsigned int log_unit, __u8 page_code,
+ int cmd_type);
+
+static void fail_all_cmds(unsigned long ctlr);
#ifdef CONFIG_PROC_FS
static int cciss_proc_get_info(char *buffer, char **start, off_t offset,
static void cciss_procinit(int i) {}
#endif /* CONFIG_PROC_FS */
+#ifdef CONFIG_COMPAT
+static long cciss_compat_ioctl(struct file *f, unsigned cmd, unsigned long arg);
+#endif
+
static struct block_device_operations cciss_fops = {
.owner = THIS_MODULE,
.open = cciss_open,
.release = cciss_release,
.ioctl = cciss_ioctl,
+ .getgeo = cciss_getgeo,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = cciss_compat_ioctl,
+#endif
.revalidate_disk= cciss_revalidate,
};
+/*
+ * Enqueuing and dequeuing functions for cmdlists.
+ */
+static inline void addQ(CommandList_struct **Qptr, CommandList_struct *c)
+{
+ if (*Qptr == NULL) {
+ *Qptr = c;
+ c->next = c->prev = c;
+ } else {
+ c->prev = (*Qptr)->prev;
+ c->next = (*Qptr);
+ (*Qptr)->prev->next = c;
+ (*Qptr)->prev = c;
+ }
+}
+
+static inline CommandList_struct *removeQ(CommandList_struct **Qptr,
+ CommandList_struct *c)
+{
+ if (c && c->next != c) {
+ if (*Qptr == c) *Qptr = c->next;
+ c->prev->next = c->next;
+ c->next->prev = c->prev;
+ } else {
+ *Qptr = NULL;
+ }
+ return c;
+}
+
#include "cciss_scsi.c" /* For SCSI tape support */
+#ifdef CONFIG_PROC_FS
+
/*
* Report information about this controller.
*/
-#define ENG_GIG 1048576000
+#define ENG_GIG 1000000000
#define ENG_GIG_FACTOR (ENG_GIG/512)
#define RAID_UNKNOWN 6
-static const char *raid_label[] = {"0","4","1(0+1)","5","5+1","ADG",
+static const char *raid_label[] = {"0","4","1(1+0)","5","5+1","ADG",
"UNKNOWN"};
-#ifdef CONFIG_PROC_FS
static struct proc_dir_entry *proc_cciss;
ctlr_info_t *h = (ctlr_info_t*)data;
drive_info_struct *drv;
unsigned long flags;
- unsigned int vol_sz, vol_sz_frac;
+ sector_t vol_sz, vol_sz_frac;
ctlr = h->ctlr;
h->product_name,
(unsigned long)h->board_id,
h->firm_ver[0], h->firm_ver[1], h->firm_ver[2], h->firm_ver[3],
- (unsigned int)h->intr,
+ (unsigned int)h->intr[SIMPLE_MODE_INT],
h->num_luns,
h->Qdepth, h->commands_outstanding,
h->maxQsinceinit, h->max_outstanding, h->maxSG);
pos += size; len += size;
cciss_proc_tape_report(ctlr, buffer, &pos, &len);
for(i=0; i<=h->highest_lun; i++) {
- sector_t tmp;
drv = &h->drv[i];
- if (drv->block_size == 0)
+ if (drv->heads == 0)
continue;
- vol_sz = drv->nr_blocks;
- sector_div(vol_sz, ENG_GIG_FACTOR);
-
- /*
- * Awkwardly do this:
- * vol_sz_frac =
- * (drv->nr_blocks%ENG_GIG_FACTOR)*100/ENG_GIG_FACTOR;
- */
- tmp = drv->nr_blocks;
- vol_sz_frac = sector_div(tmp, ENG_GIG_FACTOR);
-
- /* Now, vol_sz_frac = (drv->nr_blocks%ENG_GIG_FACTOR) */
+ vol_sz = drv->nr_blocks;
+ vol_sz_frac = sector_div(vol_sz, ENG_GIG_FACTOR);
vol_sz_frac *= 100;
sector_div(vol_sz_frac, ENG_GIG_FACTOR);
if (drv->raid_level > 5)
drv->raid_level = RAID_UNKNOWN;
size = sprintf(buffer+len, "cciss/c%dd%d:"
- "\t%4d.%02dGB\tRAID %s\n",
- ctlr, i, vol_sz,vol_sz_frac,
+ "\t%4u.%02uGB\tRAID %s\n",
+ ctlr, i, (int)vol_sz, (int)vol_sz_frac,
raid_label[drv->raid_level]);
pos += size; len += size;
}
}
static int
-cciss_proc_write(struct file *file, const char *buffer,
+cciss_proc_write(struct file *file, const char __user *buffer,
unsigned long count, void *data)
{
unsigned char cmd[80];
if (copy_from_user(cmd, buffer, count)) return -EFAULT;
cmd[count] = '\0';
len = strlen(cmd); // above 3 lines ensure safety
- if (cmd[len-1] == '\n')
+ if (len && cmd[len-1] == '\n')
cmd[--len] = '\0';
# ifdef CONFIG_CISS_SCSI_TAPE
if (strcmp("engage scsi", cmd)==0) {
return NULL;
memset(c, 0, sizeof(CommandList_struct));
+ c->cmdindex = -1;
+
c->err_info = (ErrorInfo_struct *)pci_alloc_consistent(
h->pdev, sizeof(ErrorInfo_struct),
&err_dma_handle);
err_dma_handle = h->errinfo_pool_dhandle
+ i*sizeof(ErrorInfo_struct);
h->nr_allocs++;
+
+ c->cmdindex = i;
}
c->busaddr = (__u32) cmd_dma_handle;
printk(KERN_DEBUG "cciss_open %s\n", inode->i_bdev->bd_disk->disk_name);
#endif /* CCISS_DEBUG */
+ if (host->busy_initializing || drv->busy_configuring)
+ return -EBUSY;
/*
* Root is allowed to open raw volume zero even if it's not configured
- * so array config can still work. I don't think I really like this,
+ * so array config can still work. Root is also allowed to open any
+ * volume that has a LUN ID, so it can issue IOCTL to reread the
+ * disk information. I don't think I really like this
* but I'm already using way to many device nodes to claim another one
* for "raw controller".
*/
if (drv->nr_blocks == 0) {
- if (iminor(inode) != 0)
+ if (iminor(inode) != 0) { /* not node 0? */
+ /* if not node 0 make sure it is a partition = 0 */
+ if (iminor(inode) & 0x0f) {
return -ENXIO;
+ /* if it is, make sure we have a LUN ID */
+ } else if (drv->LunID == 0) {
+ return -ENXIO;
+ }
+ }
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
}
return 0;
}
+#ifdef CONFIG_COMPAT
+
+static int do_ioctl(struct file *f, unsigned cmd, unsigned long arg)
+{
+ int ret;
+ lock_kernel();
+ ret = cciss_ioctl(f->f_dentry->d_inode, f, cmd, arg);
+ unlock_kernel();
+ return ret;
+}
+
+static int cciss_ioctl32_passthru(struct file *f, unsigned cmd, unsigned long arg);
+static int cciss_ioctl32_big_passthru(struct file *f, unsigned cmd, unsigned long arg);
+
+static long cciss_compat_ioctl(struct file *f, unsigned cmd, unsigned long arg)
+{
+ switch (cmd) {
+ case CCISS_GETPCIINFO:
+ case CCISS_GETINTINFO:
+ case CCISS_SETINTINFO:
+ case CCISS_GETNODENAME:
+ case CCISS_SETNODENAME:
+ case CCISS_GETHEARTBEAT:
+ case CCISS_GETBUSTYPES:
+ case CCISS_GETFIRMVER:
+ case CCISS_GETDRIVVER:
+ case CCISS_REVALIDVOLS:
+ case CCISS_DEREGDISK:
+ case CCISS_REGNEWDISK:
+ case CCISS_REGNEWD:
+ case CCISS_RESCANDISK:
+ case CCISS_GETLUNINFO:
+ return do_ioctl(f, cmd, arg);
+
+ case CCISS_PASSTHRU32:
+ return cciss_ioctl32_passthru(f, cmd, arg);
+ case CCISS_BIG_PASSTHRU32:
+ return cciss_ioctl32_big_passthru(f, cmd, arg);
+
+ default:
+ return -ENOIOCTLCMD;
+ }
+}
+
+static int cciss_ioctl32_passthru(struct file *f, unsigned cmd, unsigned long arg)
+{
+ IOCTL32_Command_struct __user *arg32 =
+ (IOCTL32_Command_struct __user *) arg;
+ IOCTL_Command_struct arg64;
+ IOCTL_Command_struct __user *p = compat_alloc_user_space(sizeof(arg64));
+ int err;
+ u32 cp;
+
+ err = 0;
+ err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info, sizeof(arg64.LUN_info));
+ err |= copy_from_user(&arg64.Request, &arg32->Request, sizeof(arg64.Request));
+ err |= copy_from_user(&arg64.error_info, &arg32->error_info, sizeof(arg64.error_info));
+ err |= get_user(arg64.buf_size, &arg32->buf_size);
+ err |= get_user(cp, &arg32->buf);
+ arg64.buf = compat_ptr(cp);
+ err |= copy_to_user(p, &arg64, sizeof(arg64));
+
+ if (err)
+ return -EFAULT;
+
+ err = do_ioctl(f, CCISS_PASSTHRU, (unsigned long) p);
+ if (err)
+ return err;
+ err |= copy_in_user(&arg32->error_info, &p->error_info, sizeof(arg32->error_info));
+ if (err)
+ return -EFAULT;
+ return err;
+}
+
+static int cciss_ioctl32_big_passthru(struct file *file, unsigned cmd, unsigned long arg)
+{
+ BIG_IOCTL32_Command_struct __user *arg32 =
+ (BIG_IOCTL32_Command_struct __user *) arg;
+ BIG_IOCTL_Command_struct arg64;
+ BIG_IOCTL_Command_struct __user *p = compat_alloc_user_space(sizeof(arg64));
+ int err;
+ u32 cp;
+
+ err = 0;
+ err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info, sizeof(arg64.LUN_info));
+ err |= copy_from_user(&arg64.Request, &arg32->Request, sizeof(arg64.Request));
+ err |= copy_from_user(&arg64.error_info, &arg32->error_info, sizeof(arg64.error_info));
+ err |= get_user(arg64.buf_size, &arg32->buf_size);
+ err |= get_user(arg64.malloc_size, &arg32->malloc_size);
+ err |= get_user(cp, &arg32->buf);
+ arg64.buf = compat_ptr(cp);
+ err |= copy_to_user(p, &arg64, sizeof(arg64));
+
+ if (err)
+ return -EFAULT;
+
+ err = do_ioctl(file, CCISS_BIG_PASSTHRU, (unsigned long) p);
+ if (err)
+ return err;
+ err |= copy_in_user(&arg32->error_info, &p->error_info, sizeof(arg32->error_info));
+ if (err)
+ return -EFAULT;
+ return err;
+}
+#endif
+
+static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo)
+{
+ drive_info_struct *drv = get_drv(bdev->bd_disk);
+
+ if (!drv->cylinders)
+ return -ENXIO;
+
+ geo->heads = drv->heads;
+ geo->sectors = drv->sectors;
+ geo->cylinders = drv->cylinders;
+ return 0;
+}
+
/*
* ioctl
*/
ctlr_info_t *host = get_host(disk);
drive_info_struct *drv = get_drv(disk);
int ctlr = host->ctlr;
+ void __user *argp = (void __user *)arg;
#ifdef CCISS_DEBUG
printk(KERN_DEBUG "cciss_ioctl: Called with cmd=%x %lx\n", cmd, arg);
#endif /* CCISS_DEBUG */
switch(cmd) {
- case HDIO_GETGEO:
- {
- struct hd_geometry driver_geo;
- if (drv->cylinders) {
- driver_geo.heads = drv->heads;
- driver_geo.sectors = drv->sectors;
- driver_geo.cylinders = drv->cylinders;
- } else
- return -ENXIO;
- driver_geo.start= get_start_sect(inode->i_bdev);
- if (copy_to_user((void *) arg, &driver_geo,
- sizeof( struct hd_geometry)))
- return -EFAULT;
- return(0);
- }
-
case CCISS_GETPCIINFO:
{
cciss_pci_info_struct pciinfo;
if (!arg) return -EINVAL;
+ pciinfo.domain = pci_domain_nr(host->pdev->bus);
pciinfo.bus = host->pdev->bus->number;
pciinfo.dev_fn = host->pdev->devfn;
pciinfo.board_id = host->board_id;
- if (copy_to_user((void *) arg, &pciinfo, sizeof( cciss_pci_info_struct )))
+ if (copy_to_user(argp, &pciinfo, sizeof( cciss_pci_info_struct )))
return -EFAULT;
return(0);
}
if (!arg) return -EINVAL;
intinfo.delay = readl(&host->cfgtable->HostWrite.CoalIntDelay);
intinfo.count = readl(&host->cfgtable->HostWrite.CoalIntCount);
- if (copy_to_user((void *) arg, &intinfo, sizeof( cciss_coalint_struct )))
+ if (copy_to_user(argp, &intinfo, sizeof( cciss_coalint_struct )))
return -EFAULT;
return(0);
}
if (!arg) return -EINVAL;
if (!capable(CAP_SYS_ADMIN)) return -EPERM;
- if (copy_from_user(&intinfo, (void *) arg, sizeof( cciss_coalint_struct)))
+ if (copy_from_user(&intinfo, argp, sizeof( cciss_coalint_struct)))
return -EFAULT;
if ( (intinfo.delay == 0 ) && (intinfo.count == 0))
if (!arg) return -EINVAL;
for(i=0;i<16;i++)
NodeName[i] = readb(&host->cfgtable->ServerName[i]);
- if (copy_to_user((void *) arg, NodeName, sizeof( NodeName_type)))
+ if (copy_to_user(argp, NodeName, sizeof( NodeName_type)))
return -EFAULT;
return(0);
}
if (!arg) return -EINVAL;
if (!capable(CAP_SYS_ADMIN)) return -EPERM;
- if (copy_from_user(NodeName, (void *) arg, sizeof( NodeName_type)))
+ if (copy_from_user(NodeName, argp, sizeof( NodeName_type)))
return -EFAULT;
spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
if (!arg) return -EINVAL;
heartbeat = readl(&host->cfgtable->HeartBeat);
- if (copy_to_user((void *) arg, &heartbeat, sizeof( Heartbeat_type)))
+ if (copy_to_user(argp, &heartbeat, sizeof( Heartbeat_type)))
return -EFAULT;
return(0);
}
if (!arg) return -EINVAL;
BusTypes = readl(&host->cfgtable->BusTypes);
- if (copy_to_user((void *) arg, &BusTypes, sizeof( BusTypes_type) ))
+ if (copy_to_user(argp, &BusTypes, sizeof( BusTypes_type) ))
return -EFAULT;
return(0);
}
if (!arg) return -EINVAL;
memcpy(firmware, host->firm_ver, 4);
- if (copy_to_user((void *) arg, firmware, sizeof( FirmwareVer_type)))
+ if (copy_to_user(argp, firmware, sizeof( FirmwareVer_type)))
return -EFAULT;
return(0);
}
if (!arg) return -EINVAL;
- if (copy_to_user((void *) arg, &DriverVer, sizeof( DriverVer_type) ))
+ if (copy_to_user(argp, &DriverVer, sizeof( DriverVer_type) ))
return -EFAULT;
return(0);
}
case CCISS_GETLUNINFO: {
LogvolInfo_struct luninfo;
- int i;
luninfo.LunID = drv->LunID;
luninfo.num_opens = drv->usage_count;
luninfo.num_parts = 0;
- /* count partitions 1 to 15 with sizes > 0 */
- for(i=1; i <MAX_PART; i++) {
- if (!disk->part[i])
- continue;
- if (disk->part[i]->nr_sects != 0)
- luninfo.num_parts++;
- }
- if (copy_to_user((void *) arg, &luninfo,
+ if (copy_to_user(argp, &luninfo,
sizeof(LogvolInfo_struct)))
return -EFAULT;
return(0);
}
case CCISS_DEREGDISK:
- return deregister_disk(disk);
+ return rebuild_lun_table(host, disk);
case CCISS_REGNEWD:
- return register_new_disk(host);
+ return rebuild_lun_table(host, NULL);
case CCISS_PASSTHRU:
{
if (!capable(CAP_SYS_RAWIO)) return -EPERM;
- if (copy_from_user(&iocommand, (void *) arg, sizeof( IOCTL_Command_struct) ))
+ if (copy_from_user(&iocommand, argp, sizeof( IOCTL_Command_struct) ))
return -EFAULT;
if((iocommand.buf_size < 1) &&
(iocommand.Request.Type.Direction != XFER_NONE))
kfree(buff);
return -EFAULT;
}
+ } else {
+ memset(buff, 0, iocommand.buf_size);
}
if ((c = cmd_alloc(host , 0)) == NULL)
{
/* Copy the error information out */
iocommand.error_info = *(c->err_info);
- if ( copy_to_user((void *) arg, &iocommand, sizeof( IOCTL_Command_struct) ) )
+ if ( copy_to_user(argp, &iocommand, sizeof( IOCTL_Command_struct) ) )
{
kfree(buff);
cmd_free(host, c, 0);
DECLARE_COMPLETION(wait);
__u32 left;
__u32 sz;
- BYTE *data_ptr;
+ BYTE __user *data_ptr;
if (!arg)
return -EINVAL;
status = -ENOMEM;
goto cleanup1;
}
- if (copy_from_user(ioc, (void *) arg, sizeof(*ioc))) {
+ if (copy_from_user(ioc, argp, sizeof(*ioc))) {
status = -EFAULT;
goto cleanup1;
}
status = -EINVAL;
goto cleanup1;
}
- buff = (unsigned char **) kmalloc(MAXSGENTRIES *
- sizeof(char *), GFP_KERNEL);
+ buff = kzalloc(MAXSGENTRIES * sizeof(char *), GFP_KERNEL);
if (!buff) {
status = -ENOMEM;
goto cleanup1;
}
- memset(buff, 0, MAXSGENTRIES);
buff_size = (int *) kmalloc(MAXSGENTRIES * sizeof(int),
GFP_KERNEL);
if (!buff_size) {
goto cleanup1;
}
left = ioc->buf_size;
- data_ptr = (BYTE *) ioc->buf;
+ data_ptr = ioc->buf;
while (left) {
sz = (left > ioc->malloc_size) ? ioc->malloc_size : left;
buff_size[sg_used] = sz;
status = -ENOMEM;
goto cleanup1;
}
- if (ioc->Request.Type.Direction == XFER_WRITE &&
- copy_from_user(buff[sg_used], data_ptr, sz)) {
+ if (ioc->Request.Type.Direction == XFER_WRITE) {
+ if (copy_from_user(buff[sg_used], data_ptr, sz)) {
status = -ENOMEM;
- goto cleanup1;
+ goto cleanup1;
+ }
+ } else {
+ memset(buff[sg_used], 0, sz);
}
left -= sz;
data_ptr += sz;
}
/* Copy the error information out */
ioc->error_info = *(c->err_info);
- if (copy_to_user((void *) arg, ioc, sizeof(*ioc))) {
+ if (copy_to_user(argp, ioc, sizeof(*ioc))) {
cmd_free(host, c, 0);
status = -EFAULT;
goto cleanup1;
}
if (ioc->Request.Type.Direction == XFER_READ) {
/* Copy the data out of the buffer we created */
- BYTE *ptr = (BYTE *) ioc->buf;
+ BYTE __user *ptr = ioc->buf;
for(i=0; i< sg_used; i++) {
if (copy_to_user(ptr, buff[i], buff_size[i])) {
cmd_free(host, c, 0);
cleanup1:
if (buff) {
for(i=0; i<sg_used; i++)
- if(buff[i] != NULL)
- kfree(buff[i]);
+ kfree(buff[i]);
kfree(buff);
}
- if (buff_size)
- kfree(buff_size);
- if (ioc)
- kfree(ioc);
+ kfree(buff_size);
+ kfree(ioc);
return(status);
}
default:
- return -EBADRQC;
+ return -ENOTTY;
}
}
-static int cciss_revalidate(struct gendisk *disk)
-{
- drive_info_struct *drv = disk->private_data;
- set_capacity(disk, drv->nr_blocks);
- return 0;
-}
-
/*
* revalidate_allvol is for online array config utilities. After a
* utility reconfigures the drives in the array, it can use this function
for(i=0; i< NWD; i++) {
struct gendisk *disk = host->gendisk[i];
- if (disk->flags & GENHD_FL_UP)
- del_gendisk(disk);
+ if (disk) {
+ request_queue_t *q = disk->queue;
+
+ if (disk->flags & GENHD_FL_UP)
+ del_gendisk(disk);
+ if (q)
+ blk_cleanup_queue(q);
+ }
}
/*
for (i = 0; i < NWD; i++) {
struct gendisk *disk = host->gendisk[i];
drive_info_struct *drv = &(host->drv[i]);
- if (!drv->nr_blocks)
+ /* we must register the controller even if no disks exist */
+ /* this is for the online array utilities */
+ if (!drv->heads && i)
continue;
- blk_queue_hardsect_size(host->queue, drv->block_size);
+ blk_queue_hardsect_size(drv->queue, drv->block_size);
set_capacity(disk, drv->nr_blocks);
add_disk(disk);
}
return 0;
}
-static int deregister_disk(struct gendisk *disk)
+static inline void complete_buffers(struct bio *bio, int status)
{
+ while (bio) {
+ struct bio *xbh = bio->bi_next;
+ int nr_sectors = bio_sectors(bio);
+
+ bio->bi_next = NULL;
+ blk_finished_io(len);
+ bio_endio(bio, nr_sectors << 9, status ? 0 : -EIO);
+ bio = xbh;
+ }
+
+}
+
+static void cciss_softirq_done(struct request *rq)
+{
+ CommandList_struct *cmd = rq->completion_data;
+ ctlr_info_t *h = hba[cmd->ctlr];
unsigned long flags;
- ctlr_info_t *h = get_host(disk);
- drive_info_struct *drv = get_drv(disk);
+ u64bit temp64;
+ int i, ddir;
+
+ if (cmd->Request.Type.Direction == XFER_READ)
+ ddir = PCI_DMA_FROMDEVICE;
+ else
+ ddir = PCI_DMA_TODEVICE;
+
+ /* command did not need to be retried */
+ /* unmap the DMA mapping for all the scatter gather elements */
+ for(i=0; i<cmd->Header.SGList; i++) {
+ temp64.val32.lower = cmd->SG[i].Addr.lower;
+ temp64.val32.upper = cmd->SG[i].Addr.upper;
+ pci_unmap_page(h->pdev, temp64.val, cmd->SG[i].Len, ddir);
+ }
+
+ complete_buffers(rq->bio, rq->errors);
+
+#ifdef CCISS_DEBUG
+ printk("Done with %p\n", rq);
+#endif /* CCISS_DEBUG */
+
+ spin_lock_irqsave(&h->lock, flags);
+ end_that_request_last(rq, rq->errors);
+ cmd_free(h, cmd,1);
+ spin_unlock_irqrestore(&h->lock, flags);
+}
+
+/* This function will check the usage_count of the drive to be updated/added.
+ * If the usage_count is zero then the drive information will be updated and
+ * the disk will be re-registered with the kernel. If not then it will be
+ * left alone for the next reboot. The exception to this is disk 0 which
+ * will always be left registered with the kernel since it is also the
+ * controller node. Any changes to disk 0 will show up on the next
+ * reboot.
+*/
+static void cciss_update_drive_info(int ctlr, int drv_index)
+ {
+ ctlr_info_t *h = hba[ctlr];
+ struct gendisk *disk;
+ ReadCapdata_struct *size_buff = NULL;
+ InquiryData_struct *inq_buff = NULL;
+ unsigned int block_size;
+ unsigned int total_size;
+ unsigned long flags = 0;
+ int ret = 0;
+
+ /* if the disk already exists then deregister it before proceeding*/
+ if (h->drv[drv_index].raid_level != -1){
+ spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ h->drv[drv_index].busy_configuring = 1;
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ ret = deregister_disk(h->gendisk[drv_index],
+ &h->drv[drv_index], 0);
+ h->drv[drv_index].busy_configuring = 0;
+ }
+
+ /* If the disk is in use return */
+ if (ret)
+ return;
+
+
+ /* Get information about the disk and modify the driver sturcture */
+ size_buff = kmalloc(sizeof( ReadCapdata_struct), GFP_KERNEL);
+ if (size_buff == NULL)
+ goto mem_msg;
+ inq_buff = kmalloc(sizeof( InquiryData_struct), GFP_KERNEL);
+ if (inq_buff == NULL)
+ goto mem_msg;
+
+ cciss_read_capacity(ctlr, drv_index, size_buff, 1,
+ &total_size, &block_size);
+ cciss_geometry_inquiry(ctlr, drv_index, 1, total_size, block_size,
+ inq_buff, &h->drv[drv_index]);
+
+ ++h->num_luns;
+ disk = h->gendisk[drv_index];
+ set_capacity(disk, h->drv[drv_index].nr_blocks);
+
+
+ /* if it's the controller it's already added */
+ if (drv_index){
+ disk->queue = blk_init_queue(do_cciss_request, &h->lock);
+
+ /* Set up queue information */
+ disk->queue->backing_dev_info.ra_pages = READ_AHEAD;
+ blk_queue_bounce_limit(disk->queue, hba[ctlr]->pdev->dma_mask);
+
+ /* This is a hardware imposed limit. */
+ blk_queue_max_hw_segments(disk->queue, MAXSGENTRIES);
+
+ /* This is a limit in the driver and could be eliminated. */
+ blk_queue_max_phys_segments(disk->queue, MAXSGENTRIES);
+
+ blk_queue_max_sectors(disk->queue, 512);
+
+ blk_queue_softirq_done(disk->queue, cciss_softirq_done);
+
+ disk->queue->queuedata = hba[ctlr];
+
+ blk_queue_hardsect_size(disk->queue,
+ hba[ctlr]->drv[drv_index].block_size);
+
+ h->drv[drv_index].queue = disk->queue;
+ add_disk(disk);
+ }
+
+freeret:
+ kfree(size_buff);
+ kfree(inq_buff);
+ return;
+mem_msg:
+ printk(KERN_ERR "cciss: out of memory\n");
+ goto freeret;
+}
+
+/* This function will find the first index of the controllers drive array
+ * that has a -1 for the raid_level and will return that index. This is
+ * where new drives will be added. If the index to be returned is greater
+ * than the highest_lun index for the controller then highest_lun is set
+ * to this new index. If there are no available indexes then -1 is returned.
+*/
+static int cciss_find_free_drive_index(int ctlr)
+{
+ int i;
+
+ for (i=0; i < CISS_MAX_LUN; i++){
+ if (hba[ctlr]->drv[i].raid_level == -1){
+ if (i > hba[ctlr]->highest_lun)
+ hba[ctlr]->highest_lun = i;
+ return i;
+ }
+ }
+ return -1;
+}
+
+/* This function will add and remove logical drives from the Logical
+ * drive array of the controller and maintain persistancy of ordering
+ * so that mount points are preserved until the next reboot. This allows
+ * for the removal of logical drives in the middle of the drive array
+ * without a re-ordering of those drives.
+ * INPUT
+ * h = The controller to perform the operations on
+ * del_disk = The disk to remove if specified. If the value given
+ * is NULL then no disk is removed.
+*/
+static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk)
+{
int ctlr = h->ctlr;
+ int num_luns;
+ ReportLunData_struct *ld_buff = NULL;
+ drive_info_struct *drv = NULL;
+ int return_code;
+ int listlength = 0;
+ int i;
+ int drv_found;
+ int drv_index = 0;
+ __u32 lunid = 0;
+ unsigned long flags;
+
+ /* Set busy_configuring flag for this operation */
+ spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ if (h->num_luns >= CISS_MAX_LUN){
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ return -EINVAL;
+ }
+
+ if (h->busy_configuring){
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ return -EBUSY;
+ }
+ h->busy_configuring = 1;
+
+ /* if del_disk is NULL then we are being called to add a new disk
+ * and update the logical drive table. If it is not NULL then
+ * we will check if the disk is in use or not.
+ */
+ if (del_disk != NULL){
+ drv = get_drv(del_disk);
+ drv->busy_configuring = 1;
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ return_code = deregister_disk(del_disk, drv, 1);
+ drv->busy_configuring = 0;
+ h->busy_configuring = 0;
+ return return_code;
+ } else {
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ if (!capable(CAP_SYS_RAWIO))
+ return -EPERM;
+
+ ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
+ if (ld_buff == NULL)
+ goto mem_msg;
+
+ return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff,
+ sizeof(ReportLunData_struct), 0, 0, 0,
+ TYPE_CMD);
+
+ if (return_code == IO_OK){
+ listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[0])) << 24;
+ listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[1])) << 16;
+ listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[2])) << 8;
+ listlength |= 0xff & (unsigned int)(ld_buff->LUNListLength[3]);
+ } else{ /* reading number of logical volumes failed */
+ printk(KERN_WARNING "cciss: report logical volume"
+ " command failed\n");
+ listlength = 0;
+ goto freeret;
+ }
+
+ num_luns = listlength / 8; /* 8 bytes per entry */
+ if (num_luns > CISS_MAX_LUN){
+ num_luns = CISS_MAX_LUN;
+ printk(KERN_WARNING "cciss: more luns configured"
+ " on controller than can be handled by"
+ " this driver.\n");
+ }
+
+ /* Compare controller drive array to drivers drive array.
+ * Check for updates in the drive information and any new drives
+ * on the controller.
+ */
+ for (i=0; i < num_luns; i++){
+ int j;
+
+ drv_found = 0;
+
+ lunid = (0xff &
+ (unsigned int)(ld_buff->LUN[i][3])) << 24;
+ lunid |= (0xff &
+ (unsigned int)(ld_buff->LUN[i][2])) << 16;
+ lunid |= (0xff &
+ (unsigned int)(ld_buff->LUN[i][1])) << 8;
+ lunid |= 0xff &
+ (unsigned int)(ld_buff->LUN[i][0]);
+
+ /* Find if the LUN is already in the drive array
+ * of the controller. If so then update its info
+ * if not is use. If it does not exist then find
+ * the first free index and add it.
+ */
+ for (j=0; j <= h->highest_lun; j++){
+ if (h->drv[j].LunID == lunid){
+ drv_index = j;
+ drv_found = 1;
+ }
+ }
+
+ /* check if the drive was found already in the array */
+ if (!drv_found){
+ drv_index = cciss_find_free_drive_index(ctlr);
+ if (drv_index == -1)
+ goto freeret;
+
+ }
+ h->drv[drv_index].LunID = lunid;
+ cciss_update_drive_info(ctlr, drv_index);
+ } /* end for */
+ } /* end else */
+
+freeret:
+ kfree(ld_buff);
+ h->busy_configuring = 0;
+ /* We return -1 here to tell the ACU that we have registered/updated
+ * all of the drives that we can and to keep it from calling us
+ * additional times.
+ */
+ return -1;
+mem_msg:
+ printk(KERN_ERR "cciss: out of memory\n");
+ goto freeret;
+}
+
+/* This function will deregister the disk and it's queue from the
+ * kernel. It must be called with the controller lock held and the
+ * drv structures busy_configuring flag set. It's parameters are:
+ *
+ * disk = This is the disk to be deregistered
+ * drv = This is the drive_info_struct associated with the disk to be
+ * deregistered. It contains information about the disk used
+ * by the driver.
+ * clear_all = This flag determines whether or not the disk information
+ * is going to be completely cleared out and the highest_lun
+ * reset. Sometimes we want to clear out information about
+ * the disk in preperation for re-adding it. In this case
+ * the highest_lun should be left unchanged and the LunID
+ * should not be cleared.
+*/
+static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
+ int clear_all)
+{
+ ctlr_info_t *h = get_host(disk);
if (!capable(CAP_SYS_RAWIO))
return -EPERM;
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
/* make sure logical volume is NOT is use */
- if( drv->usage_count > 1) {
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
+ if(clear_all || (h->gendisk[0] == disk)) {
+ if (drv->usage_count > 1)
return -EBUSY;
}
- drv->usage_count++;
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
+ else
+ if( drv->usage_count > 0 )
+ return -EBUSY;
+
+ /* invalidate the devices and deregister the disk. If it is disk
+ * zero do not deregister it but just zero out it's values. This
+ * allows us to delete disk zero but keep the controller registered.
+ */
+ if (h->gendisk[0] != disk){
+ if (disk) {
+ request_queue_t *q = disk->queue;
+ if (disk->flags & GENHD_FL_UP)
+ del_gendisk(disk);
+ if (q) {
+ blk_cleanup_queue(q);
+ drv->queue = NULL;
+ }
+ }
+ }
- /* invalidate the devices and deregister the disk */
- if (disk->flags & GENHD_FL_UP)
- del_gendisk(disk);
+ --h->num_luns;
+ /* zero out the disk size info */
+ drv->nr_blocks = 0;
+ drv->block_size = 0;
+ drv->heads = 0;
+ drv->sectors = 0;
+ drv->cylinders = 0;
+ drv->raid_level = -1; /* This can be used as a flag variable to
+ * indicate that this element of the drive
+ * array is free.
+ */
+
+ if (clear_all){
/* check to see if it was the last disk */
if (drv == h->drv + h->highest_lun) {
/* if so, find the new hightest lun */
int i, newhighest =-1;
for(i=0; i<h->highest_lun; i++) {
/* if the disk has size > 0, it is available */
- if (h->drv[i].nr_blocks)
+ if (h->drv[i].heads)
newhighest = i;
}
h->highest_lun = newhighest;
-
}
- --h->num_luns;
- /* zero out the disk size info */
- drv->nr_blocks = 0;
- drv->block_size = 0;
- drv->cylinders = 0;
+
drv->LunID = 0;
+ }
return(0);
}
+
static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff,
size_t size,
unsigned int use_unit_num, /* 0: address the controller,
}
} else if (cmd_type == TYPE_MSG) {
switch (cmd) {
+ case 0: /* ABORT message */
+ c->Request.CDBLen = 12;
+ c->Request.Type.Attribute = ATTR_SIMPLE;
+ c->Request.Type.Direction = XFER_WRITE;
+ c->Request.Timeout = 0;
+ c->Request.CDB[0] = cmd; /* abort */
+ c->Request.CDB[1] = 0; /* abort a command */
+ /* buff contains the tag of the command to abort */
+ memcpy(&c->Request.CDB[4], buff, 8);
+ break;
+ case 1: /* RESET message */
+ c->Request.CDBLen = 12;
+ c->Request.Type.Attribute = ATTR_SIMPLE;
+ c->Request.Type.Direction = XFER_WRITE;
+ c->Request.Timeout = 0;
+ memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB));
+ c->Request.CDB[0] = cmd; /* reset */
+ c->Request.CDB[1] = 0x04; /* reset a LUN */
case 3: /* No-Op message */
c->Request.CDBLen = 1;
c->Request.Type.Attribute = ATTR_SIMPLE;
}
}
/* unlock the buffers from DMA */
+ buff_dma_handle.val32.lower = c->SG[0].Addr.lower;
+ buff_dma_handle.val32.upper = c->SG[0].Addr.upper;
pci_unmap_single( h->pdev, (dma_addr_t) buff_dma_handle.val,
- size, PCI_DMA_BIDIRECTIONAL);
+ c->SG[0].Len, PCI_DMA_BIDIRECTIONAL);
cmd_free(h, c, 0);
return(return_status);
drv->sectors = 32; // Sectors per track
drv->cylinders = total_size / 255 / 32;
} else {
+ unsigned int t;
+
drv->block_size = block_size;
drv->nr_blocks = total_size;
drv->heads = inq_buff->data_byte[6];
drv->sectors = inq_buff->data_byte[7];
drv->cylinders = (inq_buff->data_byte[4] & 0xff) << 8;
drv->cylinders += inq_buff->data_byte[5];
+ drv->raid_level = inq_buff->data_byte[8];
+ t = drv->heads * drv->sectors;
+ if (t > 1) {
+ drv->cylinders = total_size/t;
+ }
}
} else { /* Get geometry failed */
- printk(KERN_WARNING "cciss: reading geometry failed, "
- "continuing with default geometry\n");
- drv->block_size = block_size;
- drv->nr_blocks = total_size;
- drv->heads = 255;
- drv->sectors = 32; // Sectors per track
- drv->cylinders = total_size / 255 / 32;
+ printk(KERN_WARNING "cciss: reading geometry failed\n");
}
printk(KERN_INFO " heads= %d, sectors= %d, cylinders= %d\n\n",
drv->heads, drv->sectors, drv->cylinders);
return_code = sendcmd(CCISS_READ_CAPACITY,
ctlr, buf, sizeof(*buf), 1, logvol, 0, NULL, TYPE_CMD);
if (return_code == IO_OK) {
- *total_size = be32_to_cpu(*((__u32 *) &buf->total_size[0]))+1;
- *block_size = be32_to_cpu(*((__u32 *) &buf->block_size[0]));
+ *total_size = be32_to_cpu(*((__be32 *) &buf->total_size[0]))+1;
+ *block_size = be32_to_cpu(*((__be32 *) &buf->block_size[0]));
} else { /* read capacity command failed */
printk(KERN_WARNING "cciss: read capacity failed\n");
*total_size = 0;
*total_size, *block_size);
return;
}
-static int register_new_disk(ctlr_info_t *h)
+
+static int cciss_revalidate(struct gendisk *disk)
{
- struct gendisk *disk;
- int ctlr = h->ctlr;
- int i;
- int num_luns;
+ ctlr_info_t *h = get_host(disk);
+ drive_info_struct *drv = get_drv(disk);
int logvol;
- int new_lun_found = 0;
- int new_lun_index = 0;
- int free_index_found = 0;
- int free_index = 0;
- ReportLunData_struct *ld_buff = NULL;
- ReadCapdata_struct *size_buff = NULL;
- InquiryData_struct *inq_buff = NULL;
- int return_code;
- int listlength = 0;
- __u32 lunid = 0;
+ int FOUND=0;
unsigned int block_size;
unsigned int total_size;
+ ReadCapdata_struct *size_buff = NULL;
+ InquiryData_struct *inq_buff = NULL;
+
+ for(logvol=0; logvol < CISS_MAX_LUN; logvol++)
+ {
+ if(h->drv[logvol].LunID == drv->LunID) {
+ FOUND=1;
+ break;
+ }
+ }
+
+ if (!FOUND) return 1;
- if (!capable(CAP_SYS_RAWIO))
- return -EPERM;
- /* if we have no space in our disk array left to add anything */
- if( h->num_luns >= CISS_MAX_LUN)
- return -EINVAL;
-
- ld_buff = kmalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
- if (ld_buff == NULL)
- goto mem_msg;
- memset(ld_buff, 0, sizeof(ReportLunData_struct));
size_buff = kmalloc(sizeof( ReadCapdata_struct), GFP_KERNEL);
if (size_buff == NULL)
- goto mem_msg;
+ {
+ printk(KERN_WARNING "cciss: out of memory\n");
+ return 1;
+ }
inq_buff = kmalloc(sizeof( InquiryData_struct), GFP_KERNEL);
if (inq_buff == NULL)
- goto mem_msg;
-
- return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff,
- sizeof(ReportLunData_struct), 0, 0, 0, TYPE_CMD);
+ {
+ printk(KERN_WARNING "cciss: out of memory\n");
+ kfree(size_buff);
+ return 1;
+ }
- if( return_code == IO_OK)
- {
-
- // printk("LUN Data\n--------------------------\n");
+ cciss_read_capacity(h->ctlr, logvol, size_buff, 1, &total_size, &block_size);
+ cciss_geometry_inquiry(h->ctlr, logvol, 1, total_size, block_size, inq_buff, drv);
- listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[0])) << 24;
- listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[1])) << 16;
- listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[2])) << 8;
- listlength |= 0xff & (unsigned int)(ld_buff->LUNListLength[3]);
- } else /* reading number of logical volumes failed */
- {
- printk(KERN_WARNING "cciss: report logical volume"
- " command failed\n");
- listlength = 0;
- goto free_err;
- }
- num_luns = listlength / 8; // 8 bytes pre entry
- if (num_luns > CISS_MAX_LUN)
- {
- num_luns = CISS_MAX_LUN;
- }
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "Length = %x %x %x %x = %d\n", ld_buff->LUNListLength[0],
- ld_buff->LUNListLength[1], ld_buff->LUNListLength[2],
- ld_buff->LUNListLength[3], num_luns);
-#endif
- for(i=0; i< num_luns; i++)
- {
- int j;
- int lunID_found = 0;
+ blk_queue_hardsect_size(drv->queue, drv->block_size);
+ set_capacity(disk, drv->nr_blocks);
- lunid = (0xff & (unsigned int)(ld_buff->LUN[i][3])) << 24;
- lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][2])) << 16;
- lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][1])) << 8;
- lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]);
-
- /* check to see if this is a new lun */
- for(j=0; j <= h->highest_lun; j++)
- {
-#ifdef CCISS_DEBUG
- printk("Checking %d %x against %x\n", j,h->drv[j].LunID,
- lunid);
-#endif /* CCISS_DEBUG */
- if (h->drv[j].LunID == lunid)
- {
- lunID_found = 1;
- break;
- }
-
- }
- if( lunID_found == 1)
- continue;
- else
- { /* It is the new lun we have been looking for */
-#ifdef CCISS_DEBUG
- printk("new lun found at %d\n", i);
-#endif /* CCISS_DEBUG */
- new_lun_index = i;
- new_lun_found = 1;
- break;
- }
- }
- if (!new_lun_found)
- {
- printk(KERN_WARNING "cciss: New Logical Volume not found\n");
- goto free_err;
- }
- /* Now find the free index */
- for(i=0; i <CISS_MAX_LUN; i++)
- {
-#ifdef CCISS_DEBUG
- printk("Checking Index %d\n", i);
-#endif /* CCISS_DEBUG */
- if(h->drv[i].LunID == 0)
- {
-#ifdef CCISS_DEBUG
- printk("free index found at %d\n", i);
-#endif /* CCISS_DEBUG */
- free_index_found = 1;
- free_index = i;
- break;
- }
- }
- if (!free_index_found)
- {
- printk(KERN_WARNING "cciss: unable to find free slot for disk\n");
- goto free_err;
- }
-
- logvol = free_index;
- h->drv[logvol].LunID = lunid;
- /* there could be gaps in lun numbers, track hightest */
- if(h->highest_lun < lunid)
- h->highest_lun = logvol;
- cciss_read_capacity(ctlr, logvol, size_buff, 1,
- &total_size, &block_size);
- cciss_geometry_inquiry(ctlr, logvol, 1, total_size, block_size,
- inq_buff, &h->drv[logvol]);
- h->drv[logvol].usage_count = 0;
- ++h->num_luns;
- /* setup partitions per disk */
- disk = h->gendisk[logvol];
- set_capacity(disk, h->drv[logvol].nr_blocks);
- add_disk(disk);
-freeret:
- kfree(ld_buff);
kfree(size_buff);
kfree(inq_buff);
- return (logvol);
-mem_msg:
- printk(KERN_ERR "cciss: out of memory\n");
-free_err:
- logvol = -1;
- goto freeret;
+ return 0;
}
+
/*
* Wait polling for a command to complete.
* The memory mapped FIFO is polled for the completion.
for (i = 20 * HZ; i > 0; i--) {
done = hba[ctlr]->access.command_completed(hba[ctlr]);
- if (done == FIFO_EMPTY) {
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(1);
- } else
+ if (done == FIFO_EMPTY)
+ schedule_timeout_uninterruptible(1);
+ else
return (done);
}
/* Invalid address to tell caller we ran out of time */
return 1;
}
+
+static int add_sendcmd_reject(__u8 cmd, int ctlr, unsigned long complete)
+{
+ /* We get in here if sendcmd() is polling for completions
+ and gets some command back that it wasn't expecting --
+ something other than that which it just sent down.
+ Ordinarily, that shouldn't happen, but it can happen when
+ the scsi tape stuff gets into error handling mode, and
+ starts using sendcmd() to try to abort commands and
+ reset tape drives. In that case, sendcmd may pick up
+ completions of commands that were sent to logical drives
+ through the block i/o system, or cciss ioctls completing, etc.
+ In that case, we need to save those completions for later
+ processing by the interrupt handler.
+ */
+
+#ifdef CONFIG_CISS_SCSI_TAPE
+ struct sendcmd_reject_list *srl = &hba[ctlr]->scsi_rejects;
+
+ /* If it's not the scsi tape stuff doing error handling, (abort */
+ /* or reset) then we don't expect anything weird. */
+ if (cmd != CCISS_RESET_MSG && cmd != CCISS_ABORT_MSG) {
+#endif
+ printk( KERN_WARNING "cciss cciss%d: SendCmd "
+ "Invalid command list address returned! (%lx)\n",
+ ctlr, complete);
+ /* not much we can do. */
+#ifdef CONFIG_CISS_SCSI_TAPE
+ return 1;
+ }
+
+ /* We've sent down an abort or reset, but something else
+ has completed */
+ if (srl->ncompletions >= (NR_CMDS + 2)) {
+ /* Uh oh. No room to save it for later... */
+ printk(KERN_WARNING "cciss%d: Sendcmd: Invalid command addr, "
+ "reject list overflow, command lost!\n", ctlr);
+ return 1;
+ }
+ /* Save it for later */
+ srl->complete[srl->ncompletions] = complete;
+ srl->ncompletions++;
+#endif
+ return 0;
+}
+
/*
* Send a command to the controller, and wait for it to complete.
* Only used at init time.
unsigned long complete;
ctlr_info_t *info_p= hba[ctlr];
u64bit buff_dma_handle;
- int status;
+ int status, done = 0;
if ((c = cmd_alloc(info_p, 1)) == NULL) {
printk(KERN_WARNING "cciss: unable to get memory");
info_p->access.set_intr_mask(info_p, CCISS_INTR_OFF);
/* Make sure there is room in the command FIFO */
- /* Actually it should be completely empty at this time. */
+ /* Actually it should be completely empty at this time */
+ /* unless we are in here doing error handling for the scsi */
+ /* tape side of the driver. */
for (i = 200000; i > 0; i--)
{
/* if fifo isn't full go */
* Send the cmd
*/
info_p->access.submit_command(info_p, c);
- complete = pollcomplete(ctlr);
+ done = 0;
+ do {
+ complete = pollcomplete(ctlr);
#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss: command completed\n");
+ printk(KERN_DEBUG "cciss: command completed\n");
#endif /* CCISS_DEBUG */
- if (complete != 1) {
+ if (complete == 1) {
+ printk( KERN_WARNING
+ "cciss cciss%d: SendCmd Timeout out, "
+ "No command list address returned!\n",
+ ctlr);
+ status = IO_ERROR;
+ done = 1;
+ break;
+ }
+
+ /* This will need to change for direct lookup completions */
if ( (complete & CISS_ERROR_BIT)
&& (complete & ~CISS_ERROR_BIT) == c->busaddr)
{
status = IO_ERROR;
goto cleanup1;
}
+ } else if (c->err_info->CommandStatus == CMD_UNABORTABLE) {
+ printk(KERN_WARNING "cciss%d: command could not be aborted.\n", ctlr);
+ status = IO_ERROR;
+ goto cleanup1;
}
printk(KERN_WARNING "ciss ciss%d: sendcmd"
" Error %x \n", ctlr,
goto cleanup1;
}
}
+ /* This will need changing for direct lookup completions */
if (complete != c->busaddr) {
- printk( KERN_WARNING "cciss cciss%d: SendCmd "
- "Invalid command list address returned! (%lx)\n",
- ctlr, complete);
- status = IO_ERROR;
- goto cleanup1;
- }
- } else {
- printk( KERN_WARNING
- "cciss cciss%d: SendCmd Timeout out, "
- "No command list address returned!\n",
- ctlr);
- status = IO_ERROR;
- }
+ if (add_sendcmd_reject(cmd, ctlr, complete) != 0) {
+ BUG(); /* we are pretty much hosed if we get here. */
+ }
+ continue;
+ } else
+ done = 1;
+ } while (!done);
cleanup1:
/* unlock the data buffer from DMA */
+ buff_dma_handle.val32.lower = c->SG[0].Addr.lower;
+ buff_dma_handle.val32.upper = c->SG[0].Addr.upper;
pci_unmap_single(info_p->pdev, (dma_addr_t) buff_dma_handle.val,
- size, PCI_DMA_BIDIRECTIONAL);
+ c->SG[0].Len, PCI_DMA_BIDIRECTIONAL);
+#ifdef CONFIG_CISS_SCSI_TAPE
+ /* if we saved some commands for later, process them now. */
+ if (info_p->scsi_rejects.ncompletions > 0)
+ do_cciss_intr(0, info_p, NULL);
+#endif
cmd_free(info_p, c, 1);
return (status);
}
/*
* Map (physical) PCI mem into (virtual) kernel space
*/
-static ulong remap_pci_mem(ulong base, ulong size)
+static void __iomem *remap_pci_mem(ulong base, ulong size)
{
ulong page_base = ((ulong) base) & PAGE_MASK;
ulong page_offs = ((ulong) base) - page_base;
- ulong page_remapped = (ulong) ioremap(page_base, page_offs+size);
+ void __iomem *page_remapped = ioremap(page_base, page_offs+size);
- return (ulong) (page_remapped ? (page_remapped + page_offs) : 0UL);
-}
-
-/*
- * Enqueuing and dequeuing functions for cmdlists.
- */
-static inline void addQ(CommandList_struct **Qptr, CommandList_struct *c)
-{
- if (*Qptr == NULL) {
- *Qptr = c;
- c->next = c->prev = c;
- } else {
- c->prev = (*Qptr)->prev;
- c->next = (*Qptr);
- (*Qptr)->prev->next = c;
- (*Qptr)->prev = c;
- }
-}
-
-static inline CommandList_struct *removeQ(CommandList_struct **Qptr,
- CommandList_struct *c)
-{
- if (c && c->next != c) {
- if (*Qptr == c) *Qptr = c->next;
- c->prev->next = c->next;
- c->next->prev = c->prev;
- } else {
- *Qptr = NULL;
- }
- return c;
+ return page_remapped ? (page_remapped + page_offs) : NULL;
}
/*
break;
}
- /* Get the frist entry from the Request Q */
+ /* Get the first entry from the Request Q */
removeQ(&(h->reqQ), c);
h->Qdepth--;
addQ (&(h->cmpQ), c);
}
}
-
-static inline void complete_buffers(struct bio *bio, int status)
-{
- while (bio) {
- struct bio *xbh = bio->bi_next;
- int nr_sectors = bio_sectors(bio);
-
- bio->bi_next = NULL;
- blk_finished_io(len);
- bio_endio(bio, nr_sectors << 9, status ? 0 : -EIO);
- bio = xbh;
- }
-
-}
/* Assumes that CCISS_LOCK(h->ctlr) is held. */
/* Zeros out the error record and then resends the command back */
/* to the controller */
start_io(h);
}
+
/* checks the status of the job and calls complete buffers to mark all
- * buffers for the completed job.
+ * buffers for the completed job. Note that this function does not need
+ * to hold the hba/queue lock.
*/
static inline void complete_command( ctlr_info_t *h, CommandList_struct *cmd,
int timeout)
{
int status = 1;
- int i;
int retry_cmd = 0;
- u64bit temp64;
if (timeout)
status = 0;
resend_cciss_cmd(h,cmd);
return;
}
- /* command did not need to be retried */
- /* unmap the DMA mapping for all the scatter gather elements */
- for(i=0; i<cmd->Header.SGList; i++) {
- temp64.val32.lower = cmd->SG[i].Addr.lower;
- temp64.val32.upper = cmd->SG[i].Addr.upper;
- pci_unmap_page(hba[cmd->ctlr]->pdev,
- temp64.val, cmd->SG[i].Len,
- (cmd->Request.Type.Direction == XFER_READ) ?
- PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE);
- }
- complete_buffers(cmd->rq->bio, status);
-
-#ifdef CCISS_DEBUG
- printk("Done with %p\n", cmd->rq);
-#endif /* CCISS_DEBUG */
- end_that_request_last(cmd->rq);
- cmd_free(h,cmd,1);
+ cmd->rq->completion_data = cmd;
+ cmd->rq->errors = status;
+ blk_add_trace_rq(cmd->rq->q, cmd->rq, BLK_TA_COMPLETE);
+ blk_complete_request(cmd->rq);
}
/*
drive_info_struct *drv;
int i, dir;
+ /* We call start_io here in case there is a command waiting on the
+ * queue that has not been sent.
+ */
if (blk_queue_plugged(q))
goto startio;
if (!creq)
goto startio;
- if (creq->nr_phys_segments > MAXSGENTRIES)
- BUG();
+ BUG_ON(creq->nr_phys_segments > MAXSGENTRIES);
if (( c = cmd_alloc(h, 1)) == NULL)
goto full;
/* fill in the request */
drv = creq->rq_disk->private_data;
c->Header.ReplyQueue = 0; // unused in simple mode
- c->Header.Tag.lower = c->busaddr; // use the physical address the cmd block for tag
+ /* got command from pool, so use the command block index instead */
+ /* for direct lookups. */
+ /* The first 2 bits are reserved for controller error reporting. */
+ c->Header.Tag.lower = (c->cmdindex << 3);
+ c->Header.Tag.lower |= 0x04; /* flag for direct lookup. */
c->Header.LUN.LogDev.VolId= drv->LunID;
c->Header.LUN.LogDev.Mode = 1;
c->Request.CDBLen = 10; // 12 byte commands not in FW yet;
full:
blk_stop_queue(q);
startio:
+ /* We will already have the driver lock here so not need
+ * to lock it.
+ */
start_io(h);
}
+static inline unsigned long get_next_completion(ctlr_info_t *h)
+{
+#ifdef CONFIG_CISS_SCSI_TAPE
+ /* Any rejects from sendcmd() lying around? Process them first */
+ if (h->scsi_rejects.ncompletions == 0)
+ return h->access.command_completed(h);
+ else {
+ struct sendcmd_reject_list *srl;
+ int n;
+ srl = &h->scsi_rejects;
+ n = --srl->ncompletions;
+ /* printk("cciss%d: processing saved reject\n", h->ctlr); */
+ printk("p");
+ return srl->complete[n];
+ }
+#else
+ return h->access.command_completed(h);
+#endif
+}
+
+static inline int interrupt_pending(ctlr_info_t *h)
+{
+#ifdef CONFIG_CISS_SCSI_TAPE
+ return ( h->access.intr_pending(h)
+ || (h->scsi_rejects.ncompletions > 0));
+#else
+ return h->access.intr_pending(h);
+#endif
+}
+
+static inline long interrupt_not_for_us(ctlr_info_t *h)
+{
+#ifdef CONFIG_CISS_SCSI_TAPE
+ return (((h->access.intr_pending(h) == 0) ||
+ (h->interrupts_enabled == 0))
+ && (h->scsi_rejects.ncompletions == 0));
+#else
+ return (((h->access.intr_pending(h) == 0) ||
+ (h->interrupts_enabled == 0)));
+#endif
+}
+
static irqreturn_t do_cciss_intr(int irq, void *dev_id, struct pt_regs *regs)
{
ctlr_info_t *h = dev_id;
CommandList_struct *c;
unsigned long flags;
- __u32 a, a1;
-
+ __u32 a, a1, a2;
+ int j;
+ int start_queue = h->next_to_run;
- /* Is this interrupt for us? */
- if (( h->access.intr_pending(h) == 0) || (h->interrupts_enabled == 0))
+ if (interrupt_not_for_us(h))
return IRQ_NONE;
-
/*
* If there are completed commands in the completion queue,
* we had better do something about it.
*/
spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
- while( h->access.intr_pending(h))
- {
- while((a = h->access.command_completed(h)) != FIFO_EMPTY)
- {
+ while (interrupt_pending(h)) {
+ while((a = get_next_completion(h)) != FIFO_EMPTY) {
a1 = a;
+ if ((a & 0x04)) {
+ a2 = (a >> 3);
+ if (a2 >= NR_CMDS) {
+ printk(KERN_WARNING "cciss: controller cciss%d failed, stopping.\n", h->ctlr);
+ fail_all_cmds(h->ctlr);
+ return IRQ_HANDLED;
+ }
+
+ c = h->cmd_pool + a2;
+ a = c->busaddr;
+
+ } else {
a &= ~3;
- if ((c = h->cmpQ) == NULL)
- {
- printk(KERN_WARNING "cciss: Completion of %08lx ignored\n", (unsigned long)a1);
+ if ((c = h->cmpQ) == NULL) {
+ printk(KERN_WARNING "cciss: Completion of %08x ignored\n", a1);
continue;
}
while(c->busaddr != a) {
if (c == h->cmpQ)
break;
}
+ }
/*
* If we've found the command, take it off the
* completion Q and free it
}
}
- /*
- * See if we can queue up some more IO
+ /* check to see if we have maxed out the number of commands that can
+ * be placed on the queue. If so then exit. We do this check here
+ * in case the interrupt we serviced was from an ioctl and did not
+ * free any new commands.
*/
- blk_start_queue(h->queue);
+ if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) == NR_CMDS)
+ goto cleanup;
+
+ /* We have room on the queue for more commands. Now we need to queue
+ * them up. We will also keep track of the next queue to run so
+ * that every queue gets a chance to be started first.
+ */
+ for (j=0; j < h->highest_lun + 1; j++){
+ int curr_queue = (start_queue + j) % (h->highest_lun + 1);
+ /* make sure the disk has been added and the drive is real
+ * because this can be called from the middle of init_one.
+ */
+ if(!(h->drv[curr_queue].queue) ||
+ !(h->drv[curr_queue].heads))
+ continue;
+ blk_start_queue(h->gendisk[curr_queue]->queue);
+
+ /* check to see if we have maxed out the number of commands
+ * that can be placed on the queue.
+ */
+ if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) == NR_CMDS)
+ {
+ if (curr_queue == start_queue){
+ h->next_to_run = (start_queue + 1) % (h->highest_lun + 1);
+ goto cleanup;
+ } else {
+ h->next_to_run = curr_queue;
+ goto cleanup;
+ }
+ } else {
+ curr_queue = (curr_queue + 1) % (h->highest_lun + 1);
+ }
+ }
+
+cleanup:
spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
return IRQ_HANDLED;
}
return -1;
}
+/* If MSI/MSI-X is supported by the kernel we will try to enable it on
+ * controllers that are capable. If not, we use IO-APIC mode.
+ */
+
+static void __devinit cciss_interrupt_mode(ctlr_info_t *c, struct pci_dev *pdev, __u32 board_id)
+{
+#ifdef CONFIG_PCI_MSI
+ int err;
+ struct msix_entry cciss_msix_entries[4] = {{0,0}, {0,1},
+ {0,2}, {0,3}};
+
+ /* Some boards advertise MSI but don't really support it */
+ if ((board_id == 0x40700E11) ||
+ (board_id == 0x40800E11) ||
+ (board_id == 0x40820E11) ||
+ (board_id == 0x40830E11))
+ goto default_int_mode;
+
+ if (pci_find_capability(pdev, PCI_CAP_ID_MSIX)) {
+ err = pci_enable_msix(pdev, cciss_msix_entries, 4);
+ if (!err) {
+ c->intr[0] = cciss_msix_entries[0].vector;
+ c->intr[1] = cciss_msix_entries[1].vector;
+ c->intr[2] = cciss_msix_entries[2].vector;
+ c->intr[3] = cciss_msix_entries[3].vector;
+ c->msix_vector = 1;
+ return;
+ }
+ if (err > 0) {
+ printk(KERN_WARNING "cciss: only %d MSI-X vectors "
+ "available\n", err);
+ } else {
+ printk(KERN_WARNING "cciss: MSI-X init failed %d\n",
+ err);
+ }
+ }
+ if (pci_find_capability(pdev, PCI_CAP_ID_MSI)) {
+ if (!pci_enable_msi(pdev)) {
+ c->intr[SIMPLE_MODE_INT] = pdev->irq;
+ c->msi_vector = 1;
+ return;
+ } else {
+ printk(KERN_WARNING "cciss: MSI init failed\n");
+ c->intr[SIMPLE_MODE_INT] = pdev->irq;
+ return;
+ }
+ }
+default_int_mode:
+#endif /* CONFIG_PCI_MSI */
+ /* if we get here we're going to use the default interrupt mode */
+ c->intr[SIMPLE_MODE_INT] = pdev->irq;
+ return;
+}
+
static int cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
{
ushort subsystem_vendor_id, subsystem_device_id, command;
- unchar irq = pdev->irq;
__u32 board_id, scratchpad = 0;
__u64 cfg_offset;
__u32 cfg_base_addr;
printk(KERN_ERR "cciss: Unable to Enable PCI device\n");
return( -1);
}
- if (pci_set_dma_mask(pdev, CCISS_DMA_MASK ) != 0)
- {
- printk(KERN_ERR "cciss: Unable to set DMA mask\n");
- return(-1);
- }
subsystem_vendor_id = pdev->subsystem_vendor;
subsystem_device_id = pdev->subsystem_device;
#ifdef CCISS_DEBUG
printk("command = %x\n", command);
- printk("irq = %x\n", irq);
+ printk("irq = %x\n", pdev->irq);
printk("board_id = %x\n", board_id);
#endif /* CCISS_DEBUG */
- c->intr = irq;
+/* If the kernel supports MSI/MSI-X we will try to enable that functionality,
+ * else we use the IO-APIC interrupt assigned to us by system ROM.
+ */
+ cciss_interrupt_mode(c, pdev, board_id);
/*
* Memory base addr is first addr , the second points to the config
#ifdef CCISS_DEBUG
printk("cfg offset = %x\n", cfg_offset);
#endif /* CCISS_DEBUG */
- c->cfgtable = (CfgTable_struct *)
- remap_pci_mem(pci_resource_start(pdev, cfg_base_addr_index)
- + cfg_offset, sizeof(CfgTable_struct));
+ c->cfgtable = remap_pci_mem(pci_resource_start(pdev,
+ cfg_base_addr_index) + cfg_offset,
+ sizeof(CfgTable_struct));
c->board_id = board_id;
#ifdef CCISS_DEBUG
- print_cfg_table(c->cfgtable);
+ print_cfg_table(c->cfgtable);
#endif /* CCISS_DEBUG */
for(i=0; i<NR_PRODUCTS; i++) {
int block_size;
int total_size;
- ld_buff = kmalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
+ ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
if (ld_buff == NULL)
{
printk(KERN_ERR "cciss: out of memory\n");
return;
}
- memset(ld_buff, 0, sizeof(ReportLunData_struct));
size_buff = kmalloc(sizeof( ReadCapdata_struct), GFP_KERNEL);
if (size_buff == NULL)
{
#endif /* CCISS_DEBUG */
hba[cntl_num]->highest_lun = hba[cntl_num]->num_luns-1;
- for(i=0; i< hba[cntl_num]->num_luns; i++)
+// for(i=0; i< hba[cntl_num]->num_luns; i++)
+ for(i=0; i < CISS_MAX_LUN; i++)
{
-
- lunid = (0xff & (unsigned int)(ld_buff->LUN[i][3])) << 24;
- lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][2])) << 16;
- lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][1])) << 8;
+ if (i < hba[cntl_num]->num_luns){
+ lunid = (0xff & (unsigned int)(ld_buff->LUN[i][3]))
+ << 24;
+ lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][2]))
+ << 16;
+ lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][1]))
+ << 8;
lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]);
hba[cntl_num]->drv[i].LunID = lunid;
#ifdef CCISS_DEBUG
printk(KERN_DEBUG "LUN[%d]: %x %x %x %x = %x\n", i,
- ld_buff->LUN[i][0], ld_buff->LUN[i][1],ld_buff->LUN[i][2],
- ld_buff->LUN[i][3], hba[cntl_num]->drv[i].LunID);
+ ld_buff->LUN[i][0], ld_buff->LUN[i][1],
+ ld_buff->LUN[i][2], ld_buff->LUN[i][3],
+ hba[cntl_num]->drv[i].LunID);
#endif /* CCISS_DEBUG */
cciss_read_capacity(cntl_num, i, size_buff, 0,
&total_size, &block_size);
- cciss_geometry_inquiry(cntl_num, i, 0, total_size, block_size,
- inq_buff, &hba[cntl_num]->drv[i]);
+ cciss_geometry_inquiry(cntl_num, i, 0, total_size,
+ block_size, inq_buff, &hba[cntl_num]->drv[i]);
+ } else {
+ /* initialize raid_level to indicate a free space */
+ hba[cntl_num]->drv[i].raid_level = -1;
+ }
}
kfree(ld_buff);
kfree(size_buff);
for(i=0; i< MAX_CTLR; i++) {
if (!hba[i]) {
ctlr_info_t *p;
- p = kmalloc(sizeof(ctlr_info_t), GFP_KERNEL);
+ p = kzalloc(sizeof(ctlr_info_t), GFP_KERNEL);
if (!p)
goto Enomem;
- memset(p, 0, sizeof(ctlr_info_t));
for (n = 0; n < NWD; n++)
p->gendisk[n] = disk[n];
hba[i] = p;
}
}
printk(KERN_WARNING "cciss: This driver supports a maximum"
- " of 8 controllers.\n");
+ " of %d controllers.\n", MAX_CTLR);
goto out;
Enomem:
printk(KERN_ERR "cciss: out of memory.\n");
request_queue_t *q;
int i;
int j;
+ int rc;
printk(KERN_DEBUG "cciss: Device 0x%x has been found at"
" bus %d dev %d func %d\n",
pdev->device, pdev->bus->number, PCI_SLOT(pdev->devfn),
PCI_FUNC(pdev->devfn));
i = alloc_cciss_hba();
- if( i < 0 )
+ if(i < 0)
return (-1);
+
+ hba[i]->busy_initializing = 1;
+
if (cciss_pci_init(hba[i], pdev) != 0)
goto clean1;
hba[i]->pdev = pdev;
/* configure PCI DMA stuff */
- if (!pci_set_dma_mask(pdev, 0xffffffffffffffffULL))
+ if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK))
printk("cciss: using DAC cycles\n");
- else if (!pci_set_dma_mask(pdev, 0xffffffff))
+ else if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK))
printk("cciss: not using DAC cycles\n");
else {
printk("cciss: no suitable DMA available\n");
goto clean1;
}
- if (register_blkdev(COMPAQ_CISS_MAJOR+i, hba[i]->devname)) {
- printk(KERN_ERR "cciss: Unable to register device %s\n",
- hba[i]->devname);
+ /*
+ * register with the major number, or get a dynamic major number
+ * by passing 0 as argument. This is done for greater than
+ * 8 controller support.
+ */
+ if (i < MAX_CTLR_ORIG)
+ hba[i]->major = COMPAQ_CISS_MAJOR + i;
+ rc = register_blkdev(hba[i]->major, hba[i]->devname);
+ if(rc == -EBUSY || rc == -EINVAL) {
+ printk(KERN_ERR
+ "cciss: Unable to get major number %d for %s "
+ "on hba %d\n", hba[i]->major, hba[i]->devname, i);
goto clean1;
}
+ else {
+ if (i >= MAX_CTLR_ORIG)
+ hba[i]->major = rc;
+ }
/* make sure the board interrupts are off */
hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_OFF);
- if( request_irq(hba[i]->intr, do_cciss_intr,
+ if( request_irq(hba[i]->intr[SIMPLE_MODE_INT], do_cciss_intr,
SA_INTERRUPT | SA_SHIRQ | SA_SAMPLE_RANDOM,
hba[i]->devname, hba[i])) {
printk(KERN_ERR "cciss: Unable to get irq %d for %s\n",
- hba[i]->intr, hba[i]->devname);
+ hba[i]->intr[SIMPLE_MODE_INT], hba[i]->devname);
goto clean2;
}
hba[i]->cmd_pool_bits = kmalloc(((NR_CMDS+BITS_PER_LONG-1)/BITS_PER_LONG)*sizeof(unsigned long), GFP_KERNEL);
printk( KERN_ERR "cciss: out of memory");
goto clean4;
}
-
- spin_lock_init(&hba[i]->lock);
- q = blk_init_queue(do_cciss_request, &hba[i]->lock);
- if (!q)
+#ifdef CONFIG_CISS_SCSI_TAPE
+ hba[i]->scsi_rejects.complete =
+ kmalloc(sizeof(hba[i]->scsi_rejects.complete[0]) *
+ (NR_CMDS + 5), GFP_KERNEL);
+ if (hba[i]->scsi_rejects.complete == NULL) {
+ printk( KERN_ERR "cciss: out of memory");
goto clean4;
-
- q->backing_dev_info.ra_pages = READ_AHEAD;
- hba[i]->queue = q;
- q->queuedata = hba[i];
+ }
+#endif
+ spin_lock_init(&hba[i]->lock);
/* Initialize the pdev driver private data.
have it point to hba[i]. */
hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_ON);
cciss_procinit(i);
+ hba[i]->busy_initializing = 0;
- blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask);
+ for(j=0; j < NWD; j++) { /* mfm */
+ drive_info_struct *drv = &(hba[i]->drv[j]);
+ struct gendisk *disk = hba[i]->gendisk[j];
+
+ q = blk_init_queue(do_cciss_request, &hba[i]->lock);
+ if (!q) {
+ printk(KERN_ERR
+ "cciss: unable to allocate queue for disk %d\n",
+ j);
+ break;
+ }
+ drv->queue = q;
- /* This is a hardware imposed limit. */
- blk_queue_max_hw_segments(q, MAXSGENTRIES);
+ q->backing_dev_info.ra_pages = READ_AHEAD;
+ blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask);
- /* This is a limit in the driver and could be eliminated. */
- blk_queue_max_phys_segments(q, MAXSGENTRIES);
+ /* This is a hardware imposed limit. */
+ blk_queue_max_hw_segments(q, MAXSGENTRIES);
- blk_queue_max_sectors(q, 512);
+ /* This is a limit in the driver and could be eliminated. */
+ blk_queue_max_phys_segments(q, MAXSGENTRIES);
+ blk_queue_max_sectors(q, 512);
- for(j=0; j<NWD; j++) {
- drive_info_struct *drv = &(hba[i]->drv[j]);
- struct gendisk *disk = hba[i]->gendisk[j];
+ blk_queue_softirq_done(q, cciss_softirq_done);
+ q->queuedata = hba[i];
sprintf(disk->disk_name, "cciss/c%dd%d", i, j);
sprintf(disk->devfs_name, "cciss/host%d/target%d", i, j);
- disk->major = COMPAQ_CISS_MAJOR + i;
+ disk->major = hba[i]->major;
disk->first_minor = j << NWD_SHIFT;
disk->fops = &cciss_fops;
- disk->queue = hba[i]->queue;
+ disk->queue = q;
disk->private_data = drv;
- if( !(drv->nr_blocks))
+ /* we must register the controller even if no disks exist */
+ /* this is for the online array utilities */
+ if(!drv->heads && j)
continue;
- blk_queue_hardsect_size(hba[i]->queue, drv->block_size);
+ blk_queue_hardsect_size(q, drv->block_size);
set_capacity(disk, drv->nr_blocks);
add_disk(disk);
}
+
return(1);
clean4:
- if(hba[i]->cmd_pool_bits)
- kfree(hba[i]->cmd_pool_bits);
+#ifdef CONFIG_CISS_SCSI_TAPE
+ kfree(hba[i]->scsi_rejects.complete);
+#endif
+ kfree(hba[i]->cmd_pool_bits);
if(hba[i]->cmd_pool)
pci_free_consistent(hba[i]->pdev,
NR_CMDS * sizeof(CommandList_struct),
NR_CMDS * sizeof( ErrorInfo_struct),
hba[i]->errinfo_pool,
hba[i]->errinfo_pool_dhandle);
- free_irq(hba[i]->intr, hba[i]);
+ free_irq(hba[i]->intr[SIMPLE_MODE_INT], hba[i]);
clean2:
- unregister_blkdev(COMPAQ_CISS_MAJOR+i, hba[i]->devname);
+ unregister_blkdev(hba[i]->major, hba[i]->devname);
clean1:
release_io_mem(hba[i]);
+ hba[i]->busy_initializing = 0;
free_hba(i);
return(-1);
}
printk(KERN_WARNING "Error Flushing cache on controller %d\n",
i);
}
- free_irq(hba[i]->intr, hba[i]);
+ free_irq(hba[i]->intr[2], hba[i]);
+
+#ifdef CONFIG_PCI_MSI
+ if (hba[i]->msix_vector)
+ pci_disable_msix(hba[i]->pdev);
+ else if (hba[i]->msi_vector)
+ pci_disable_msi(hba[i]->pdev);
+#endif /* CONFIG_PCI_MSI */
+
pci_set_drvdata(pdev, NULL);
- iounmap((void*)hba[i]->vaddr);
+ iounmap(hba[i]->vaddr);
cciss_unregister_scsi(i); /* unhook from SCSI subsystem */
- unregister_blkdev(COMPAQ_CISS_MAJOR+i, hba[i]->devname);
+ unregister_blkdev(hba[i]->major, hba[i]->devname);
remove_proc_entry(hba[i]->devname, proc_cciss);
/* remove it from the disk list */
for (j = 0; j < NWD; j++) {
struct gendisk *disk = hba[i]->gendisk[j];
- if (disk->flags & GENHD_FL_UP)
- del_gendisk(disk);
+ if (disk) {
+ request_queue_t *q = disk->queue;
+
+ if (disk->flags & GENHD_FL_UP)
+ del_gendisk(disk);
+ if (q)
+ blk_cleanup_queue(q);
+ }
}
- blk_cleanup_queue(hba[i]->queue);
pci_free_consistent(hba[i]->pdev, NR_CMDS * sizeof(CommandList_struct),
hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle);
pci_free_consistent(hba[i]->pdev, NR_CMDS * sizeof( ErrorInfo_struct),
hba[i]->errinfo_pool, hba[i]->errinfo_pool_dhandle);
kfree(hba[i]->cmd_pool_bits);
+#ifdef CONFIG_CISS_SCSI_TAPE
+ kfree(hba[i]->scsi_rejects.complete);
+#endif
release_io_mem(hba[i]);
free_hba(i);
}
* This is it. Register the PCI driver information for the cards we control
* the OS will call our registered routines when it finds one of our cards.
*/
-int __init cciss_init(void)
+static int __init cciss_init(void)
{
printk(KERN_INFO DRIVER_NAME "\n");
/* Register for our PCI devices */
- return pci_module_init(&cciss_pci_driver);
-}
-
-static int __init init_cciss_module(void)
-{
- return ( cciss_init());
+ return pci_register_driver(&cciss_pci_driver);
}
-static void __exit cleanup_cciss_module(void)
+static void __exit cciss_cleanup(void)
{
int i;
remove_proc_entry("cciss", proc_root_driver);
}
-module_init(init_cciss_module);
-module_exit(cleanup_cciss_module);
+static void fail_all_cmds(unsigned long ctlr)
+{
+ /* If we get here, the board is apparently dead. */
+ ctlr_info_t *h = hba[ctlr];
+ CommandList_struct *c;
+ unsigned long flags;
+
+ printk(KERN_WARNING "cciss%d: controller not responding.\n", h->ctlr);
+ h->alive = 0; /* the controller apparently died... */
+
+ spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
+
+ pci_disable_device(h->pdev); /* Make sure it is really dead. */
+
+ /* move everything off the request queue onto the completed queue */
+ while( (c = h->reqQ) != NULL ) {
+ removeQ(&(h->reqQ), c);
+ h->Qdepth--;
+ addQ (&(h->cmpQ), c);
+ }
+
+ /* Now, fail everything on the completed queue with a HW error */
+ while( (c = h->cmpQ) != NULL ) {
+ removeQ(&h->cmpQ, c);
+ c->err_info->CommandStatus = CMD_HARDWARE_ERR;
+ if (c->cmd_type == CMD_RWREQ) {
+ complete_command(h, c, 0);
+ } else if (c->cmd_type == CMD_IOCTL_PEND)
+ complete(c->waiting);
+#ifdef CONFIG_CISS_SCSI_TAPE
+ else if (c->cmd_type == CMD_SCSI)
+ complete_scsi_command(c, 0, 0);
+#endif
+ }
+ spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
+ return;
+}
+
+module_init(cciss_init);
+module_exit(cciss_cleanup);
git://git.onelab.eu / linux-2.6.git / blobdiff