config HW_CONSOLE
bool
- depends on VT && !S390 && !USERMODE
+ depends on VT && !S390 && !UML
default y
+config VT_HW_CONSOLE_BINDING
+ bool "Support for binding and unbinding console drivers"
+ depends on HW_CONSOLE
+ default n
+ ---help---
+ The virtual terminal is the device that interacts with the physical
+ terminal through console drivers. On these systems, at least one
+ console driver is loaded. In other configurations, additional console
+ drivers may be enabled, such as the framebuffer console. If more than
+ 1 console driver is enabled, setting this to 'y' will allow you to
+ select the console driver that will serve as the backend for the
+ virtual terminals.
+
+ See <file:Documentation/console/console.txt> for more
+ information. For framebuffer console users, please refer to
+ <file:Documentation/fb/fbcon.txt>.
+
config SERIAL_NONSTANDARD
bool "Non-standard serial port support"
---help---
config COMPUTONE
tristate "Computone IntelliPort Plus serial support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
---help---
This driver supports the entire family of Intelliport II/Plus
controllers with the exception of the MicroChannel controllers and
config DIGIEPCA
tristate "Digiboard Intelligent Async Support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD
---help---
This is a driver for Digi International's Xx, Xeve, and Xem series
of cards which provide multiple serial ports. You would need
you have a card like this, say Y here and read the file
<file:Documentation/digiepca.txt>.
- NOTE: There is another, separate driver for the Digiboard PC boards:
- "Digiboard PC/Xx Support" below. You should (and can) only select
- one of the two drivers.
-
To compile this driver as a module, choose M here: the
module will be called epca.
-config DIGI
- tristate "Digiboard PC/Xx Support"
- depends on SERIAL_NONSTANDARD && DIGIEPCA=n && BROKEN_ON_SMP
- help
- This is a driver for the Digiboard PC/Xe, PC/Xi, and PC/Xeve cards
- that give you many serial ports. You would need something like this
- to connect more than two modems to your Linux box, for instance in
- order to become a dial-in server. If you have a card like that, say
- Y here and read the file <file:Documentation/digiboard.txt>.
-
- To compile this driver as a module, choose M here: the
- module will be called pcxx.
-
config ESPSERIAL
tristate "Hayes ESP serial port support"
- depends on SERIAL_NONSTANDARD && ISA && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD && ISA && ISA_DMA_API
help
This is a driver which supports Hayes ESP serial ports. Both single
port cards and multiport cards are supported. Make sure to read
config MOXA_INTELLIO
tristate "Moxa Intellio support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD
help
Say Y here if you have a Moxa Intellio multiport serial card.
The module will be called mxser. If you want to do that, say M
here.
+config MOXA_SMARTIO_NEW
+ tristate "Moxa SmartIO support v. 2.0 (EXPERIMENTAL)"
+ depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
+ help
+ Say Y here if you have a Moxa SmartIO multiport serial card and/or
+ want to help develop a new version of this driver.
+
+ This is upgraded (1.9.1) driver from original Moxa drivers with
+ changes finally resulting in PCI probing.
+
+ Use at your own risk.
+
+ This driver can also be built as a module. The module will be called
+ mxser_new. If you want to do that, say M here.
+
config ISI
tristate "Multi-Tech multiport card support (EXPERIMENTAL)"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && PCI
+ select FW_LOADER
help
This is a driver for the Multi-Tech cards which provide several
serial ports. The driver is experimental and can currently only be
config SYNCLINK
tristate "Microgate SyncLink card support"
- depends on SERIAL_NONSTANDARD && PCI
+ depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API
help
Provides support for the SyncLink ISA and PCI multiprotocol serial
adapters. These adapters support asynchronous and HDLC bit
The module will be called synclinkmp. If you want to do that, say M
here.
+config SYNCLINK_GT
+ tristate "SyncLink GT/AC support"
+ depends on SERIAL_NONSTANDARD && PCI
+ help
+ Support for SyncLink GT and SyncLink AC families of
+ synchronous and asynchronous serial adapters
+ manufactured by Microgate Systems, Ltd. (www.microgate.com)
+
config N_HDLC
tristate "HDLC line discipline support"
depends on SERIAL_NONSTANDARD
config SPECIALIX
tristate "Specialix IO8+ card support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD
help
This is a driver for the Specialix IO8+ multiport card (both the
ISA and the PCI version) which gives you many serial ports. You
config SX
tristate "Specialix SX (and SI) card support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
help
This is a driver for the SX and SI multiport serial cards.
Please read the file <file:Documentation/sx.txt> for details.
config RIO
tristate "Specialix RIO system support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD
help
This is a driver for the Specialix RIO, a smart serial card which
drives an outboard box that can support up to 128 ports. Product
To compile this driver as a module, choose M here: the
module will be called istallion.
-config SERIAL_TX3912
- bool "TX3912/PR31700 serial port support"
- depends on SERIAL_NONSTANDARD && MIPS && BROKEN_ON_SMP
- help
- The TX3912 is a Toshiba RISC processor based o the MIPS 3900 core;
- see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
- Say Y here to enable kernel support for the on-board serial port.
-
-config SERIAL_TX3912_CONSOLE
- bool "Console on TX3912/PR31700 serial port"
- depends on SERIAL_TX3912
- help
- The TX3912 is a Toshiba RISC processor based o the MIPS 3900 core;
- see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
- Say Y here to direct console I/O to the on-board serial port.
-
config AU1000_UART
bool "Enable Au1000 UART Support"
depends on SERIAL_NONSTANDARD && MIPS
If you have an Alchemy AU1000 processor (MIPS based) and you want
to use a console on a serial port, say Y. Otherwise, say N.
-config QTRONIX_KEYBOARD
- bool "Enable Qtronix 990P Keyboard Support"
- depends on IT8712
- help
- Images of Qtronix keyboards are at
- <http://www.qtronix.com/keyboard.html>.
-
-config IT8172_CIR
- bool
- depends on QTRONIX_KEYBOARD
- default y
-
-config IT8172_SCR0
- bool "Enable Smart Card Reader 0 Support "
- depends on IT8712
- help
- Say Y here to support smart-card reader 0 (SCR0) on the Integrated
- Technology Express, Inc. ITE8172 SBC. Vendor page at
- <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
- board at <http://www.mvista.com/partners/semiconductor/ite.html>.
-
-config IT8172_SCR1
- bool "Enable Smart Card Reader 1 Support "
- depends on IT8712
- help
- Say Y here to support smart-card reader 1 (SCR1) on the Integrated
- Technology Express, Inc. ITE8172 SBC. Vendor page at
- <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
- board at <http://www.mvista.com/partners/semiconductor/ite.html>.
-
config A2232
tristate "Commodore A2232 serial support (EXPERIMENTAL)"
depends on EXPERIMENTAL && ZORRO && BROKEN_ON_SMP
controller communication from user space (you want this!),
say Y. Otherwise, say N.
+config SGI_TIOCX
+ bool "SGI TIO CX driver support"
+ depends on (IA64_SGI_SN2 || IA64_GENERIC)
+ help
+ If you have an SGI Altix and you have fpga devices attached
+ to your TIO, say Y here, otherwise say N.
+
+config SGI_MBCS
+ tristate "SGI FPGA Core Services driver support"
+ depends on SGI_TIOCX
+ help
+ If you have an SGI Altix with an attached SABrick
+ say Y or M here, otherwise say N.
+
source "drivers/serial/Kconfig"
config UNIX98_PTYS
When not in use, each legacy PTY occupies 12 bytes on 32-bit
architectures and 24 bytes on 64-bit architectures.
+config BRIQ_PANEL
+ tristate 'Total Impact briQ front panel driver'
+ depends on PPC_CHRP
+ ---help---
+ The briQ is a small footprint CHRP computer with a frontpanel VFD, a
+ tristate led and two switches. It is the size of a CDROM drive.
+
+ If you have such one and want anything showing on the VFD then you
+ must answer Y here.
+
+ To compile this driver as a module, choose M here: the
+ module will be called briq_panel.
+
+ It's safe to say N here.
+
config PRINTER
tristate "Parallel printer support"
depends on PARPORT
If unsure, say N.
+config HVC_DRIVER
+ bool
+ help
+ Users of pSeries machines that want to utilize the hvc console front-end
+ module for their backend console driver should select this option.
+ It will automatically be selected if one of the back-end console drivers
+ is selected.
+
+
config HVC_CONSOLE
bool "pSeries Hypervisor Virtual Console support"
depends on PPC_PSERIES
+ select HVC_DRIVER
help
pSeries machines when partitioned support a hypervisor virtual
console. This driver allows each pSeries partition to have a console
which is accessed via the HMC.
+config HVC_ISERIES
+ bool "iSeries Hypervisor Virtual Console support"
+ depends on PPC_ISERIES && !VIOCONS
+ select HVC_DRIVER
+ help
+ iSeries machines support a hypervisor virtual console.
+
+config HVC_RTAS
+ bool "IBM RTAS Console support"
+ depends on PPC_RTAS
+ select HVC_DRIVER
+ help
+ IBM Console device driver which makes use of RTAS
+
config HVCS
tristate "IBM Hypervisor Virtual Console Server support"
depends on PPC_PSERIES
If you're not sure, say N.
-config HW_RANDOM
- tristate "Intel/AMD/VIA HW Random Number Generator support"
- depends on (X86 || IA64) && PCI
- ---help---
- This driver provides kernel-side support for the Random Number
- Generator hardware found on Intel i8xx-based motherboards,
- AMD 76x-based motherboards, and Via Nehemiah CPUs.
-
- Provides a character driver, used to read() entropy data.
-
- To compile this driver as a module, choose M here: the
- module will be called hw_random.
-
- If unsure, say N.
+source "drivers/char/hw_random/Kconfig"
config NVRAM
tristate "/dev/nvram support"
- depends on ATARI || X86 || X86_64 || ARM || GENERIC_NVRAM
+ depends on ATARI || X86 || ARM || GENERIC_NVRAM
---help---
If you say Y here and create a character special file /dev/nvram
with major number 10 and minor number 144 using mknod ("man mknod"),
config RTC
tristate "Enhanced Real Time Clock Support"
- depends on !PPC32 && !PARISC && !IA64 && !M68K
+ depends on !PPC && !PARISC && !IA64 && !M68K && (!SPARC || PCI) && !FRV && !ARM && !SUPERH
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
config GEN_RTC
tristate "Generic /dev/rtc emulation"
- depends on RTC!=y && !IA64 && !ARM
+ depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC && !FRV
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
will get access to the real time clock (or hardware clock) built
into your computer.
-config S3C2410_RTC
- bool "S3C2410 RTC Driver"
- depends on ARCH_S3C2410
- help
- RTC (Realtime Clock) driver for the clock inbuilt into the
- Samsung S3C2410. This can provide periodic interrupt rates
- from 1Hz to 64Hz for user programs, and wakeup from Alarm.
-
config COBALT_LCD
bool "Support for Cobalt LCD"
depends on MIPS_COBALT
To compile this driver as a module, choose M here: the
module will be called sonypi.
-
-menu "Ftape, the floppy tape device driver"
-
-config FTAPE
- tristate "Ftape (QIC-80/Travan) support"
- depends on BROKEN_ON_SMP && (ALPHA || X86)
- ---help---
- If you have a tape drive that is connected to your floppy
- controller, say Y here.
-
- Some tape drives (like the Seagate "Tape Store 3200" or the Iomega
- "Ditto 3200" or the Exabyte "Eagle TR-3") come with a "high speed"
- controller of their own. These drives (and their companion
- controllers) are also supported if you say Y here.
-
- If you have a special controller (such as the CMS FC-10, FC-20,
- Mountain Mach-II, or any controller that is based on the Intel 82078
- FDC like the high speed controllers by Seagate and Exabyte and
- Iomega's "Ditto Dash") you must configure it by selecting the
- appropriate entries from the "Floppy tape controllers" sub-menu
- below and possibly modify the default values for the IRQ and DMA
- channel and the IO base in ftape's configuration menu.
-
- If you want to use your floppy tape drive on a PCI-bus based system,
- please read the file <file:drivers/char/ftape/README.PCI>.
-
- The ftape kernel driver is also available as a runtime loadable
- module. To compile this driver as a module, choose M here: the
- module will be called ftape.
-
- Note that the Ftape-HOWTO is out of date (sorry) and documents the
- older version 2.08 of this software but still contains useful
- information. There is a web page with more recent documentation at
- <http://www.instmath.rwth-aachen.de/~heine/ftape/>. This page
- always contains the latest release of the ftape driver and useful
- information (backup software, ftape related patches and
- documentation, FAQ). Note that the file system interface has
- changed quite a bit compared to previous versions of ftape. Please
- read <file:Documentation/ftape.txt>.
-
-source "drivers/char/ftape/Kconfig"
-
-endmenu
+config TANBAC_TB0219
+ tristate "TANBAC TB0219 base board support"
+ depends on TANBAC_TB022X
+ select GPIO_VR41XX
source "drivers/char/agp/Kconfig"
config SCx200_GPIO
tristate "NatSemi SCx200 GPIO Support"
depends on SCx200
+ select NSC_GPIO
help
Give userspace access to the GPIO pins on the National
Semiconductor SCx200 processors.
If compiled as a module, it will be called scx200_gpio.
+config PC8736x_GPIO
+ tristate "NatSemi PC8736x GPIO Support"
+ depends on X86
+ default SCx200_GPIO # mostly N
+ select NSC_GPIO # needed for support routines
+ help
+ Give userspace access to the GPIO pins on the National
+ Semiconductor PC-8736x (x=[03456]) SuperIO chip. The chip
+ has multiple functional units, inc several managed by
+ hwmon/pc87360 driver. Tested with PC-87366
+
+ If compiled as a module, it will be called pc8736x_gpio.
+
+config NSC_GPIO
+ tristate "NatSemi Base GPIO Support"
+ depends on X86_32
+ # selected by SCx200_GPIO and PC8736x_GPIO
+ # what about 2 selectors differing: m != y
+ help
+ Common support used (and needed) by scx200_gpio and
+ pc8736x_gpio drivers. If those drivers are built as
+ modules, this one will be too, named nsc_gpio
+
+config CS5535_GPIO
+ tristate "AMD CS5535/CS5536 GPIO (Geode Companion Device)"
+ depends on X86_32
+ help
+ Give userspace access to the GPIO pins on the AMD CS5535 and
+ CS5536 Geode companion devices.
+
+ If compiled as a module, it will be called cs5535_gpio.
+
+config GPIO_VR41XX
+ tristate "NEC VR4100 series General-purpose I/O Unit support"
+ depends on CPU_VR41XX
+
config RAW_DRIVER
tristate "RAW driver (/dev/raw/rawN) (OBSOLETE)"
+ depends on BLOCK
help
The raw driver permits block devices to be bound to /dev/raw/rawN.
Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O.
See the raw(8) manpage for more details.
- The raw driver is deprecated and may be removed from 2.7
- kernels. Applications should simply open the device (eg /dev/hda1)
+ The raw driver is deprecated and will be removed soon.
+ Applications should simply open the device (eg /dev/hda1)
with the O_DIRECT flag.
+config MAX_RAW_DEVS
+ int "Maximum number of RAW devices to support (1-8192)"
+ depends on RAW_DRIVER
+ default "256"
+ help
+ The maximum number of RAW devices that are supported.
+ Default is 256. Increase this number in case you need lots of
+ raw devices.
+
config HPET
bool "HPET - High Precision Event Timer" if (X86 || IA64)
default n
help
If you say Y here, you will have a miscdevice named "/dev/hpet/". Each
open selects one of the timers supported by the HPET. The timers are
- non-periodioc and/or periodic.
+ non-periodic and/or periodic.
config HPET_RTC_IRQ
bool "HPET Control RTC IRQ" if !HPET_EMULATE_RTC
exposed to the user. If this applies to your hardware,
say N here.
-config MAX_RAW_DEVS
- int "Maximum number of RAW devices to support (1-8192)"
- depends on RAW_DRIVER
- default "256"
- help
- The maximum number of RAW devices that are supported.
- Default is 256. Increase this number in case you need lots of
- raw devices.
-
config HANGCHECK_TIMER
tristate "Hangcheck timer"
- depends on X86_64 || X86
+ depends on X86 || IA64 || PPC64
help
The hangcheck-timer module detects when the system has gone
out to lunch past a certain margin. It can reboot the system
The mmtimer device allows direct userspace access to the
Altix system timer.
+source "drivers/char/tpm/Kconfig"
+
+config TELCLOCK
+ tristate "Telecom clock driver for MPBL0010 ATCA SBC"
+ depends on EXPERIMENTAL && X86
+ default n
+ help
+ The telecom clock device is specific to the MPBL0010 ATCA computer and
+ allows direct userspace access to the configuration of the telecom clock
+ configuration settings. This device is used for hardware synchronization
+ across the ATCA backplane fabric. Upon loading, the driver exports a
+ sysfs directory, /sys/devices/platform/telco_clock, with a number of
+ files for controlling the behavior of this hardware.
+
endmenu