config ISI
tristate "Multi-Tech multiport card support (EXPERIMENTAL)"
- depends on SERIAL_NONSTANDARD && EXPERIMENTAL && BROKEN_ON_SMP && m
+ depends on SERIAL_NONSTANDARD && PCI && EXPERIMENTAL && BROKEN_ON_SMP && m
help
This is a driver for the Multi-Tech cards which provide several
serial ports. The driver is experimental and can currently only be
config SYNCLINK
tristate "Microgate SyncLink card support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && PCI
help
Provides support for the SyncLink ISA and PCI multiprotocol serial
adapters. These adapters support asynchronous and HDLC bit
module will be called istallion.
config SERIAL_TX3912
- bool "TMPTX3912/PR31700 serial port support"
+ bool "TX3912/PR31700 serial port support"
depends on SERIAL_NONSTANDARD && MIPS && BROKEN_ON_SMP
help
The TX3912 is a Toshiba RISC processor based o the MIPS 3900 core;
Say Y here to enable kernel support for the on-board serial port.
config SERIAL_TX3912_CONSOLE
- bool "Console on TMPTX3912/PR31700 serial port"
+ bool "Console on TX3912/PR31700 serial port"
depends on SERIAL_TX3912
help
The TX3912 is a Toshiba RISC processor based o the MIPS 3900 core;
If you have an Alchemy AU1000 processor (MIPS based) and you want
to use serial ports, say Y. Otherwise, say N.
-config SGI_L1_SERIAL
- bool "SGI Altix L1 serial support"
- depends on SERIAL_NONSTANDARD && IA64
- help
- If you have an SGI Altix and you want to use the serial port
- connected to the system controller (you want this!), say Y.
- Otherwise, say N.
-
-config SGI_L1_SERIAL_CONSOLE
- bool "SGI Altix L1 serial console support"
- depends on SGI_L1_SERIAL
- help
- If you have an SGI Altix and you would like to use the system
- controller serial port as your console (you want this!),
- say Y. Otherwise, say N.
-
config AU1000_SERIAL_CONSOLE
bool "Enable Au1000 serial console"
depends on AU1000_UART
console. This driver allows each pSeries partition to have a console
which is accessed via the HMC.
-config PC9800_OLDLP
- tristate "NEC PC-9800 old-style printer port support"
- depends on X86_PC9800 && !PARPORT
- ---help---
- If you intend to attach a printer to the parallel port of NEC PC-9801
- /PC-9821 with OLD compatibility mode, Say Y.
+config HVCS
+ tristate "IBM Hypervisor Virtual Console Server support"
+ depends on PPC_PSERIES
+ help
+ Partitionable IBM Power5 ppc64 machines allow hosting of
+ firmware virtual consoles from one Linux partition by
+ another Linux partition. This driver allows console data
+ from Linux partitions to be accessed through TTY device
+ interfaces in the device tree of a Linux partition running
+ this driver.
-config PC9800_OLDLP_CONSOLE
- bool "Support for console on line printer"
- depends on PC9800_OLDLP
+ To compile this driver as a module, choose M here: the
+ module will be called hvcs.ko. Additionally, this module
+ will depend on arch specific APIs exported from hvcserver.ko
+ which will also be compiled when this driver is built as a
+ module.
config QIC02_TAPE
tristate "QIC-02 tape support"
config RTC
tristate "Enhanced Real Time Clock Support"
- depends on !PPC32 && !PARISC && !IA64 && !X86_PC9800 && !M68K
+ depends on !PPC32 && !PARISC && !IA64 && !M68K
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
To compile this driver as a module, choose M here: the
module will be called rtc.
+config SGI_DS1286
+ tristate "SGI DS1286 RTC support"
+ depends on SGI_IP22
+ help
+ If you say Y here and create a character special file /dev/rtc with
+ major number 10 and minor number 135 using mknod ("man mknod"), you
+ will get access to the real time clock built into your computer.
+ Every SGI has such a clock built in. It reports status information
+ via the file /proc/rtc and its behaviour is set by various ioctls on
+ /dev/rtc.
+
+config SGI_IP27_RTC
+ bool "SGI M48T35 RTC support"
+ depends on SGI_IP27
+ help
+ If you say Y here and create a character special file /dev/rtc with
+ major number 10 and minor number 135 using mknod ("man mknod"), you
+ will get access to the real time clock built into your computer.
+ Every SGI has such a clock built in. It reports status information
+ via the file /proc/rtc and its behaviour is set by various ioctls on
+ /dev/rtc.
+
config GEN_RTC
tristate "Generic /dev/rtc emulation"
depends on RTC!=y && !IA64
bool "EFI Real Time Clock Services"
depends on IA64
-config RTC98
- tristate "NEC PC-9800 Real Time Clock Support"
- depends on X86_PC9800
- default y
- ---help---
- If you say Y here and create a character special file /dev/rtc with
- major number 10 and minor number 135 using mknod ("man mknod"), you
- will get access to the real time clock (or hardware clock) built
-
-config H8
- bool "Tadpole ANA H8 Support (OBSOLETE)"
- depends on OBSOLETE && ALPHA_BOOK1
+config COBALT_LCD
+ bool "Support for Cobalt LCD"
+ depends on MIPS_COBALT
help
- The Hitachi H8/337 is a microcontroller used to deal with the power
- and thermal environment. If you say Y here, you will be able to
- communicate with it via a character special device.
-
- If unsure, say N.
+ This option enables support for the LCD display and buttons found
+ on Cobalt systems through a misc device.
config DTLK
tristate "Double Talk PC internal speech card support"
config APPLICOM
tristate "Applicom intelligent fieldbus card support"
+ depends on PCI
---help---
This driver provides the kernel-side support for the intelligent
fieldbus cards made by Applicom International. More information
config FTAPE
tristate "Ftape (QIC-80/Travan) support"
- depends on BROKEN_ON_SMP
+ depends on BROKEN_ON_SMP && (ALPHA || X86)
---help---
If you have a tape drive that is connected to your floppy
controller, say Y here.
kernels. Applications should simply open the device (eg /dev/hda1)
with the O_DIRECT flag.
+config HPET
+ bool "HPET - High Precision Event Timer" if (X86 || IA64)
+ default n
+ depends on ACPI
+ help
+ If you say Y here, you will have a miscdevice named "/dev/hpet/". Each
+ open selects one of the timers supported by the HPET. The timers are
+ non-periodioc and/or periodic.
+
+config HPET_RTC_IRQ
+ bool "HPET Control RTC IRQ" if !HPET_EMULATE_RTC
+ default n
+ depends on HPET
+ help
+ If you say Y here, you will disable RTC_IRQ in drivers/char/rtc.c. It
+ is assumed the platform called hpet_alloc with the RTC IRQ values for
+ the HPET timers.
+
+config HPET_MMAP
+ bool "Allow mmap of HPET"
+ default y
+ depends on HPET
+ help
+ If you say Y here, user applications will be able to mmap
+ the HPET registers.
+
+ In some hardware implementations, the page containing HPET
+ registers may also contain other things that shouldn't be
+ exposed to the user. If this applies to your hardware,
+ say N here.
+
config MAX_RAW_DEVS
int "Maximum number of RAW devices to support (1-8192)"
depends on RAW_DRIVER