config COMPUTONE
tristate "Computone IntelliPort Plus serial support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD
---help---
This driver supports the entire family of Intelliport II/Plus
controllers with the exception of the MicroChannel controllers and
config DIGIEPCA
tristate "Digiboard Intelligent Async Support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD
---help---
This is a driver for Digi International's Xx, Xeve, and Xem series
of cards which provide multiple serial ports. You would need
config ESPSERIAL
tristate "Hayes ESP serial port support"
- depends on SERIAL_NONSTANDARD && ISA && BROKEN_ON_SMP && ISA_DMA_API
+ depends on SERIAL_NONSTANDARD && ISA && ISA_DMA_API
help
This is a driver which supports Hayes ESP serial ports. Both single
port cards and multiport cards are supported. Make sure to read
config MOXA_INTELLIO
tristate "Moxa Intellio support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD
help
Say Y here if you have a Moxa Intellio multiport serial card.
config ISI
tristate "Multi-Tech multiport card support (EXPERIMENTAL)"
depends on SERIAL_NONSTANDARD
+ select FW_LOADER
help
This is a driver for the Multi-Tech cards which provide several
serial ports. The driver is experimental and can currently only be
The module will be called synclinkmp. If you want to do that, say M
here.
+config SYNCLINK_GT
+ tristate "SyncLink GT/AC support"
+ depends on SERIAL_NONSTANDARD && PCI
+ help
+ Support for SyncLink GT and SyncLink AC families of
+ synchronous and asynchronous serial adapters
+ manufactured by Microgate Systems, Ltd. (www.microgate.com)
+
config N_HDLC
tristate "HDLC line discipline support"
depends on SERIAL_NONSTANDARD
config RIO
tristate "Specialix RIO system support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP && !64BIT
help
This is a driver for the Specialix RIO, a smart serial card which
drives an outboard box that can support up to 128 ports. Product
security. This option enables these legacy devices; on most
systems, it is safe to say N.
-config CRASH
- tristate "Crash Utility memory driver"
config LEGACY_PTY_COUNT
int "Maximum number of legacy PTY in use"
config NVRAM
tristate "/dev/nvram support"
- depends on ATARI || X86 || X86_64 || ARM || GENERIC_NVRAM
+ depends on ATARI || X86 || ARM || GENERIC_NVRAM
---help---
If you say Y here and create a character special file /dev/nvram
with major number 10 and minor number 144 using mknod ("man mknod"),
config RTC
tristate "Enhanced Real Time Clock Support"
- depends on !PPC32 && !PARISC && !IA64 && !M68K
+ depends on !PPC32 && !PARISC && !IA64 && !M68K && (!SPARC || PCI) && !FRV
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
config GEN_RTC
tristate "Generic /dev/rtc emulation"
- depends on RTC!=y && !IA64 && !ARM
+ depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC && !FRV
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
config TANBAC_TB0219
tristate "TANBAC TB0219 base board support"
- depends TANBAC_TB0229
-
+ depends TANBAC_TB022X
menu "Ftape, the floppy tape device driver"
module. To compile this driver as a module, choose M here: the
module will be called ftape.
- Note that the Ftape-HOWTO is out of date (sorry) and documents the
- older version 2.08 of this software but still contains useful
- information. There is a web page with more recent documentation at
- <http://www.instmath.rwth-aachen.de/~heine/ftape/>. This page
- always contains the latest release of the ftape driver and useful
- information (backup software, ftape related patches and
- documentation, FAQ). Note that the file system interface has
- changed quite a bit compared to previous versions of ftape. Please
- read <file:Documentation/ftape.txt>.
-
source "drivers/char/ftape/Kconfig"
endmenu
If compiled as a module, it will be called scx200_gpio.
+config CS5535_GPIO
+ tristate "AMD CS5535/CS5536 GPIO (Geode Companion Device)"
+ depends on X86_32
+ help
+ Give userspace access to the GPIO pins on the AMD CS5535 and
+ CS5536 Geode companion devices.
+
+ If compiled as a module, it will be called cs5535_gpio.
+
+config GPIO_VR41XX
+ tristate "NEC VR4100 series General-purpose I/O Unit support"
+ depends on CPU_VR41XX
+
config RAW_DRIVER
tristate "RAW driver (/dev/raw/rawN) (OBSOLETE)"
help
Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O.
See the raw(8) manpage for more details.
- The raw driver is deprecated and may be removed from 2.7
- kernels. Applications should simply open the device (eg /dev/hda1)
+ The raw driver is deprecated and will be removed soon.
+ Applications should simply open the device (eg /dev/hda1)
with the O_DIRECT flag.
+config MAX_RAW_DEVS
+ int "Maximum number of RAW devices to support (1-8192)"
+ depends on RAW_DRIVER
+ default "256"
+ help
+ The maximum number of RAW devices that are supported.
+ Default is 256. Increase this number in case you need lots of
+ raw devices.
+
config HPET
bool "HPET - High Precision Event Timer" if (X86 || IA64)
default n
exposed to the user. If this applies to your hardware,
say N here.
-config MAX_RAW_DEVS
- int "Maximum number of RAW devices to support (1-8192)"
- depends on RAW_DRIVER
- default "256"
- help
- The maximum number of RAW devices that are supported.
- Default is 256. Increase this number in case you need lots of
- raw devices.
-
config HANGCHECK_TIMER
tristate "Hangcheck timer"
- depends on X86_64 || X86 || IA64 || PPC64 || ARCH_S390
+ depends on X86 || IA64 || PPC64
help
The hangcheck-timer module detects when the system has gone
out to lunch past a certain margin. It can reboot the system
source "drivers/char/tpm/Kconfig"
+config TELCLOCK
+ tristate "Telecom clock driver for MPBL0010 ATCA SBC"
+ depends on EXPERIMENTAL
+ default n
+ help
+ The telecom clock device is specific to the MPBL0010 ATCA computer and
+ allows direct userspace access to the configuration of the telecom clock
+ configuration settings. This device is used for hardware synchronization
+ across the ATCA backplane fabric. Upon loading, the driver exports a
+ sysfs directory, /sys/devices/platform/telco_clock, with a number of
+ files for controlling the behavior of this hardware.
+
endmenu