config HW_CONSOLE
bool
- depends on VT && !S390 && !UM
+ depends on VT && !S390 && !UML
default y
config SERIAL_NONSTANDARD
config COMPUTONE
tristate "Computone IntelliPort Plus serial support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD
---help---
This driver supports the entire family of Intelliport II/Plus
controllers with the exception of the MicroChannel controllers and
config DIGIEPCA
tristate "Digiboard Intelligent Async Support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD
---help---
This is a driver for Digi International's Xx, Xeve, and Xem series
of cards which provide multiple serial ports. You would need
you have a card like this, say Y here and read the file
<file:Documentation/digiepca.txt>.
- NOTE: There is another, separate driver for the Digiboard PC boards:
- "Digiboard PC/Xx Support" below. You should (and can) only select
- one of the two drivers.
-
To compile this driver as a module, choose M here: the
module will be called epca.
-config DIGI
- tristate "Digiboard PC/Xx Support"
- depends on SERIAL_NONSTANDARD && DIGIEPCA=n && BROKEN_ON_SMP
- help
- This is a driver for the Digiboard PC/Xe, PC/Xi, and PC/Xeve cards
- that give you many serial ports. You would need something like this
- to connect more than two modems to your Linux box, for instance in
- order to become a dial-in server. If you have a card like that, say
- Y here and read the file <file:Documentation/digiboard.txt>.
-
- To compile this driver as a module, choose M here: the
- module will be called pcxx.
-
config ESPSERIAL
tristate "Hayes ESP serial port support"
- depends on SERIAL_NONSTANDARD && ISA && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD && ISA && ISA_DMA_API
help
This is a driver which supports Hayes ESP serial ports. Both single
port cards and multiport cards are supported. Make sure to read
config MOXA_INTELLIO
tristate "Moxa Intellio support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD
help
Say Y here if you have a Moxa Intellio multiport serial card.
config MOXA_SMARTIO
tristate "Moxa SmartIO support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD
help
Say Y here if you have a Moxa SmartIO multiport serial card.
config ISI
tristate "Multi-Tech multiport card support (EXPERIMENTAL)"
- depends on SERIAL_NONSTANDARD && EXPERIMENTAL && BROKEN_ON_SMP && m
+ depends on SERIAL_NONSTANDARD
+ select FW_LOADER
help
This is a driver for the Multi-Tech cards which provide several
serial ports. The driver is experimental and can currently only be
config SYNCLINK
tristate "Microgate SyncLink card support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API
help
Provides support for the SyncLink ISA and PCI multiprotocol serial
adapters. These adapters support asynchronous and HDLC bit
The module will be called synclinkmp. If you want to do that, say M
here.
+config SYNCLINK_GT
+ tristate "SyncLink GT/AC support"
+ depends on SERIAL_NONSTANDARD && PCI
+ help
+ Support for SyncLink GT and SyncLink AC families of
+ synchronous and asynchronous serial adapters
+ manufactured by Microgate Systems, Ltd. (www.microgate.com)
+
config N_HDLC
tristate "HDLC line discipline support"
depends on SERIAL_NONSTANDARD
config SPECIALIX
tristate "Specialix IO8+ card support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD
help
This is a driver for the Specialix IO8+ multiport card (both the
ISA and the PCI version) which gives you many serial ports. You
config SX
tristate "Specialix SX (and SI) card support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD
help
This is a driver for the SX and SI multiport serial cards.
Please read the file <file:Documentation/sx.txt> for details.
config RIO
tristate "Specialix RIO system support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP && !64BIT
help
This is a driver for the Specialix RIO, a smart serial card which
drives an outboard box that can support up to 128 ports. Product
To compile this driver as a module, choose M here: the
module will be called istallion.
-config SERIAL_TX3912
- bool "TMPTX3912/PR31700 serial port support"
- depends on SERIAL_NONSTANDARD && MIPS && BROKEN_ON_SMP
- help
- The TX3912 is a Toshiba RISC processor based o the MIPS 3900 core;
- see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
- Say Y here to enable kernel support for the on-board serial port.
-
-config SERIAL_TX3912_CONSOLE
- bool "Console on TMPTX3912/PR31700 serial port"
- depends on SERIAL_TX3912
- help
- The TX3912 is a Toshiba RISC processor based o the MIPS 3900 core;
- see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
- Say Y here to direct console I/O to the on-board serial port.
-
config AU1000_UART
bool "Enable Au1000 UART Support"
depends on SERIAL_NONSTANDARD && MIPS
If you have an Alchemy AU1000 processor (MIPS based) and you want
to use serial ports, say Y. Otherwise, say N.
-config SGI_L1_SERIAL
- bool "SGI Altix L1 serial support"
- depends on SERIAL_NONSTANDARD && IA64 && DISCONTIGMEM
- help
- If you have an SGI Altix and you want to use the serial port
- connected to the system controller (you want this!), say Y.
- Otherwise, say N.
-
-config SGI_L1_SERIAL_CONSOLE
- bool "SGI Altix L1 serial console support"
- depends on SGI_L1_SERIAL
- help
- If you have an SGI Altix and you would like to use the system
- controller serial port as your console (you want this!),
- say Y. Otherwise, say N.
-
config AU1000_SERIAL_CONSOLE
bool "Enable Au1000 serial console"
depends on AU1000_UART
will also be built as a module. This has to be loaded before
"ser_a2232". If you want to do this, answer M here.
+config SGI_SNSC
+ bool "SGI Altix system controller communication support"
+ depends on (IA64_SGI_SN2 || IA64_GENERIC)
+ help
+ If you have an SGI Altix and you want to enable system
+ controller communication from user space (you want this!),
+ say Y. Otherwise, say N.
+
+config SGI_TIOCX
+ bool "SGI TIO CX driver support"
+ depends on (IA64_SGI_SN2 || IA64_GENERIC)
+ help
+ If you have an SGI Altix and you have fpga devices attached
+ to your TIO, say Y here, otherwise say N.
+
+config SGI_MBCS
+ tristate "SGI FPGA Core Services driver support"
+ depends on SGI_TIOCX
+ help
+ If you have an SGI Altix with an attached SABrick
+ say Y or M here, otherwise say N.
+
source "drivers/serial/Kconfig"
config UNIX98_PTYS
security. This option enables these legacy devices; on most
systems, it is safe to say N.
-config CRASH
- tristate "Crash Utility memory driver"
config LEGACY_PTY_COUNT
int "Maximum number of legacy PTY in use"
depends on LEGACY_PTYS
+ range 1 256
default "256"
---help---
The maximum number of legacy PTYs that can be used at any one time.
console. This driver allows each pSeries partition to have a console
which is accessed via the HMC.
-config QIC02_TAPE
- tristate "QIC-02 tape support"
+config HVCS
+ tristate "IBM Hypervisor Virtual Console Server support"
+ depends on PPC_PSERIES
help
- If you have a non-SCSI tape drive like that, say Y.
+ Partitionable IBM Power5 ppc64 machines allow hosting of
+ firmware virtual consoles from one Linux partition by
+ another Linux partition. This driver allows console data
+ from Linux partitions to be accessed through TTY device
+ interfaces in the device tree of a Linux partition running
+ this driver.
To compile this driver as a module, choose M here: the
- module will be called tpqic02.
-
-config QIC02_DYNCONF
- bool "Do you want runtime configuration for QIC-02"
- depends on QIC02_TAPE
- help
- You can either configure this driver once and for all by editing a
- header file (<file:include/linux/tpqic02.h>), in which case you
- should say N, or you can fetch a program via anonymous FTP which is
- able to configure this driver during runtime. The program to do
- this is called 'qic02conf' and it is part of the
- tpqic02-support-X.Y.tar.gz support package.
-
- If you want to use the qic02conf program, say Y.
-
-comment "Edit configuration parameters in ./include/linux/tpqic02.h!"
- depends on QIC02_TAPE && !QIC02_DYNCONF
-
-comment "Setting runtime QIC-02 configuration is done with qic02conf"
- depends on QIC02_TAPE && QIC02_DYNCONF
-
-comment "from the tpqic02-support package. It is available at"
- depends on QIC02_TAPE && QIC02_DYNCONF
-
-comment "metalab.unc.edu or ftp://titus.cfw.com/pub/Linux/util/"
- depends on QIC02_TAPE && QIC02_DYNCONF
+ module will be called hvcs.ko. Additionally, this module
+ will depend on arch specific APIs exported from hvcserver.ko
+ which will also be compiled when this driver is built as a
+ module.
source "drivers/char/ipmi/Kconfig"
config NVRAM
tristate "/dev/nvram support"
- depends on ATARI || X86 || X86_64 || ARM || GENERIC_NVRAM
+ depends on ATARI || X86 || ARM || GENERIC_NVRAM
---help---
If you say Y here and create a character special file /dev/nvram
with major number 10 and minor number 144 using mknod ("man mknod"),
config RTC
tristate "Enhanced Real Time Clock Support"
- depends on !PPC32 && !PARISC && !IA64 && !M68K
+ depends on !PPC32 && !PARISC && !IA64 && !M68K && (!SPARC || PCI) && !FRV
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
To compile this driver as a module, choose M here: the
module will be called rtc.
+config SGI_DS1286
+ tristate "SGI DS1286 RTC support"
+ depends on SGI_IP22
+ help
+ If you say Y here and create a character special file /dev/rtc with
+ major number 10 and minor number 135 using mknod ("man mknod"), you
+ will get access to the real time clock built into your computer.
+ Every SGI has such a clock built in. It reports status information
+ via the file /proc/rtc and its behaviour is set by various ioctls on
+ /dev/rtc.
+
+config SGI_IP27_RTC
+ bool "SGI M48T35 RTC support"
+ depends on SGI_IP27
+ help
+ If you say Y here and create a character special file /dev/rtc with
+ major number 10 and minor number 135 using mknod ("man mknod"), you
+ will get access to the real time clock built into your computer.
+ Every SGI has such a clock built in. It reports status information
+ via the file /proc/rtc and its behaviour is set by various ioctls on
+ /dev/rtc.
+
config GEN_RTC
tristate "Generic /dev/rtc emulation"
- depends on RTC!=y && !IA64
+ depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC && !FRV
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
bool "EFI Real Time Clock Services"
depends on IA64
-config H8
- bool "Tadpole ANA H8 Support (OBSOLETE)"
- depends on OBSOLETE && ALPHA_BOOK1
+config DS1302
+ tristate "DS1302 RTC support"
+ depends on M32R && (PLAT_M32700UT || PLAT_OPSPUT)
help
- The Hitachi H8/337 is a microcontroller used to deal with the power
- and thermal environment. If you say Y here, you will be able to
- communicate with it via a character special device.
+ If you say Y here and create a character special file /dev/rtc with
+ major number 121 and minor number 0 using mknod ("man mknod"), you
+ will get access to the real time clock (or hardware clock) built
+ into your computer.
- If unsure, say N.
+config S3C2410_RTC
+ bool "S3C2410 RTC Driver"
+ depends on ARCH_S3C2410
+ help
+ RTC (Realtime Clock) driver for the clock inbuilt into the
+ Samsung S3C2410. This can provide periodic interrupt rates
+ from 1Hz to 64Hz for user programs, and wakeup from Alarm.
+
+config RTC_VR41XX
+ tristate "NEC VR4100 series Real Time Clock Support"
+ depends on CPU_VR41XX
+
+config COBALT_LCD
+ bool "Support for Cobalt LCD"
+ depends on MIPS_COBALT
+ help
+ This option enables support for the LCD display and buttons found
+ on Cobalt systems through a misc device.
config DTLK
tristate "Double Talk PC internal speech card support"
config APPLICOM
tristate "Applicom intelligent fieldbus card support"
+ depends on PCI
---help---
This driver provides the kernel-side support for the intelligent
fieldbus cards made by Applicom International. More information
config SONYPI
tristate "Sony Vaio Programmable I/O Control Device support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && X86 && PCI && !64BIT
+ depends on EXPERIMENTAL && X86 && PCI && INPUT && !64BIT
---help---
This driver enables access to the Sony Programmable I/O Control
Device which can be found in many (all ?) Sony Vaio laptops.
To compile this driver as a module, choose M here: the
module will be called sonypi.
+config TANBAC_TB0219
+ tristate "TANBAC TB0219 base board support"
+ depends TANBAC_TB022X
menu "Ftape, the floppy tape device driver"
config FTAPE
tristate "Ftape (QIC-80/Travan) support"
- depends on BROKEN_ON_SMP
+ depends on BROKEN_ON_SMP && (ALPHA || X86)
---help---
If you have a tape drive that is connected to your floppy
controller, say Y here.
module. To compile this driver as a module, choose M here: the
module will be called ftape.
- Note that the Ftape-HOWTO is out of date (sorry) and documents the
- older version 2.08 of this software but still contains useful
- information. There is a web page with more recent documentation at
- <http://www.instmath.rwth-aachen.de/~heine/ftape/>. This page
- always contains the latest release of the ftape driver and useful
- information (backup software, ftape related patches and
- documentation, FAQ). Note that the file system interface has
- changed quite a bit compared to previous versions of ftape. Please
- read <file:Documentation/ftape.txt>.
-
source "drivers/char/ftape/Kconfig"
endmenu
If compiled as a module, it will be called scx200_gpio.
+config CS5535_GPIO
+ tristate "AMD CS5535/CS5536 GPIO (Geode Companion Device)"
+ depends on X86_32
+ help
+ Give userspace access to the GPIO pins on the AMD CS5535 and
+ CS5536 Geode companion devices.
+
+ If compiled as a module, it will be called cs5535_gpio.
+
+config GPIO_VR41XX
+ tristate "NEC VR4100 series General-purpose I/O Unit support"
+ depends on CPU_VR41XX
+
config RAW_DRIVER
tristate "RAW driver (/dev/raw/rawN) (OBSOLETE)"
help
Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O.
See the raw(8) manpage for more details.
- The raw driver is deprecated and may be removed from 2.7
- kernels. Applications should simply open the device (eg /dev/hda1)
+ The raw driver is deprecated and will be removed soon.
+ Applications should simply open the device (eg /dev/hda1)
with the O_DIRECT flag.
+config MAX_RAW_DEVS
+ int "Maximum number of RAW devices to support (1-8192)"
+ depends on RAW_DRIVER
+ default "256"
+ help
+ The maximum number of RAW devices that are supported.
+ Default is 256. Increase this number in case you need lots of
+ raw devices.
+
config HPET
bool "HPET - High Precision Event Timer" if (X86 || IA64)
default n
depends on ACPI
help
- If you say Y here, you will have a device named "/dev/hpet/XX" for
- each timer supported by the HPET. The timers are
+ If you say Y here, you will have a miscdevice named "/dev/hpet/". Each
+ open selects one of the timers supported by the HPET. The timers are
non-periodioc and/or periodic.
config HPET_RTC_IRQ
is assumed the platform called hpet_alloc with the RTC IRQ values for
the HPET timers.
-config HPET_NOMMAP
- bool "HPET - Control mmap capability."
- default n
+config HPET_MMAP
+ bool "Allow mmap of HPET"
+ default y
depends on HPET
help
- If you say Y here, then the mmap interface for the HPET driver returns ENOSYS.
- Some hardware implementations might not want all the memory in the page the
- HPET control registers reside to be exposed.
+ If you say Y here, user applications will be able to mmap
+ the HPET registers.
-config MAX_RAW_DEVS
- int "Maximum number of RAW devices to support (1-8192)"
- depends on RAW_DRIVER
- default "256"
- help
- The maximum number of RAW devices that are supported.
- Default is 256. Increase this number in case you need lots of
- raw devices.
+ In some hardware implementations, the page containing HPET
+ registers may also contain other things that shouldn't be
+ exposed to the user. If this applies to your hardware,
+ say N here.
config HANGCHECK_TIMER
tristate "Hangcheck timer"
- depends on X86_64 || X86
+ depends on X86 || IA64 || PPC64
help
The hangcheck-timer module detects when the system has gone
out to lunch past a certain margin. It can reboot the system
or merely print a warning.
+config MMTIMER
+ tristate "MMTIMER Memory mapped RTC for SGI Altix"
+ depends on IA64_GENERIC || IA64_SGI_SN2
+ default y
+ help
+ The mmtimer device allows direct userspace access to the
+ Altix system timer.
+
+source "drivers/char/tpm/Kconfig"
+
+config TELCLOCK
+ tristate "Telecom clock driver for MPBL0010 ATCA SBC"
+ depends on EXPERIMENTAL
+ default n
+ help
+ The telecom clock device is specific to the MPBL0010 ATCA computer and
+ allows direct userspace access to the configuration of the telecom clock
+ configuration settings. This device is used for hardware synchronization
+ across the ATCA backplane fabric. Upon loading, the driver exports a
+ sysfs directory, /sys/devices/platform/telco_clock, with a number of
+ files for controlling the behavior of this hardware.
+
endmenu