config HW_CONSOLE
bool
- depends on VT && !S390 && !UM
+ depends on VT && !S390 && !USERMODE
default y
config SERIAL_NONSTANDARD
config MOXA_SMARTIO
tristate "Moxa SmartIO support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD
help
Say Y here if you have a Moxa SmartIO multiport serial card.
config ISI
tristate "Multi-Tech multiport card support (EXPERIMENTAL)"
- depends on SERIAL_NONSTANDARD && PCI && EXPERIMENTAL && BROKEN_ON_SMP && m
+ depends on SERIAL_NONSTANDARD
help
This is a driver for the Multi-Tech cards which provide several
serial ports. The driver is experimental and can currently only be
To compile this driver as a module, choose M here: the
module will be called istallion.
-config SERIAL_TX3912
- bool "TX3912/PR31700 serial port support"
- depends on SERIAL_NONSTANDARD && MIPS && BROKEN_ON_SMP
- help
- The TX3912 is a Toshiba RISC processor based o the MIPS 3900 core;
- see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
- Say Y here to enable kernel support for the on-board serial port.
-
-config SERIAL_TX3912_CONSOLE
- bool "Console on TX3912/PR31700 serial port"
- depends on SERIAL_TX3912
- help
- The TX3912 is a Toshiba RISC processor based o the MIPS 3900 core;
- see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
- Say Y here to direct console I/O to the on-board serial port.
-
config AU1000_UART
bool "Enable Au1000 UART Support"
depends on SERIAL_NONSTANDARD && MIPS
will also be built as a module. This has to be loaded before
"ser_a2232". If you want to do this, answer M here.
+config SGI_SNSC
+ bool "SGI Altix system controller communication support"
+ depends on (IA64_SGI_SN2 || IA64_GENERIC)
+ help
+ If you have an SGI Altix and you want to enable system
+ controller communication from user space (you want this!),
+ say Y. Otherwise, say N.
+
source "drivers/serial/Kconfig"
config UNIX98_PTYS
config LEGACY_PTY_COUNT
int "Maximum number of legacy PTY in use"
depends on LEGACY_PTYS
+ range 1 256
default "256"
---help---
The maximum number of legacy PTYs that can be used at any one time.
which will also be compiled when this driver is built as a
module.
-config QIC02_TAPE
- tristate "QIC-02 tape support"
- help
- If you have a non-SCSI tape drive like that, say Y.
-
- To compile this driver as a module, choose M here: the
- module will be called tpqic02.
-
-config QIC02_DYNCONF
- bool "Do you want runtime configuration for QIC-02"
- depends on QIC02_TAPE
- help
- You can either configure this driver once and for all by editing a
- header file (<file:include/linux/tpqic02.h>), in which case you
- should say N, or you can fetch a program via anonymous FTP which is
- able to configure this driver during runtime. The program to do
- this is called 'qic02conf' and it is part of the
- tpqic02-support-X.Y.tar.gz support package.
-
- If you want to use the qic02conf program, say Y.
-
-comment "Edit configuration parameters in ./include/linux/tpqic02.h!"
- depends on QIC02_TAPE && !QIC02_DYNCONF
-
-comment "Setting runtime QIC-02 configuration is done with qic02conf"
- depends on QIC02_TAPE && QIC02_DYNCONF
-
-comment "from the tpqic02-support package. It is available at"
- depends on QIC02_TAPE && QIC02_DYNCONF
-
-comment "metalab.unc.edu or ftp://titus.cfw.com/pub/Linux/util/"
- depends on QIC02_TAPE && QIC02_DYNCONF
-
source "drivers/char/ipmi/Kconfig"
source "drivers/char/watchdog/Kconfig"
config GEN_RTC
tristate "Generic /dev/rtc emulation"
- depends on RTC!=y && !IA64
+ depends on RTC!=y && !IA64 && !ARM
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
bool "EFI Real Time Clock Services"
depends on IA64
+config DS1302
+ tristate "DS1302 RTC support"
+ depends on M32R && (PLAT_M32700UT || PLAT_OPSPUT)
+ help
+ If you say Y here and create a character special file /dev/rtc with
+ major number 121 and minor number 0 using mknod ("man mknod"), you
+ will get access to the real time clock (or hardware clock) built
+ into your computer.
+
+config S3C2410_RTC
+ bool "S3C2410 RTC Driver"
+ depends on ARCH_S3C2410
+ help
+ RTC (Realtime Clock) driver for the clock inbuilt into the
+ Samsung S3C2410. This can provide periodic interrupt rates
+ from 1Hz to 64Hz for user programs, and wakeup from Alarm.
+
config COBALT_LCD
bool "Support for Cobalt LCD"
depends on MIPS_COBALT
config SONYPI
tristate "Sony Vaio Programmable I/O Control Device support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && X86 && PCI && !64BIT
+ depends on EXPERIMENTAL && X86 && PCI && INPUT && !64BIT
---help---
This driver enables access to the Sony Programmable I/O Control
Device which can be found in many (all ?) Sony Vaio laptops.
out to lunch past a certain margin. It can reboot the system
or merely print a warning.
+config MMTIMER
+ tristate "MMTIMER Memory mapped RTC for SGI Altix"
+ depends on IA64_GENERIC || IA64_SGI_SN2
+ default y
+ help
+ The mmtimer device allows direct userspace access to the
+ Altix system timer.
+
endmenu
git://git.onelab.eu / linux-2.6.git / blobdiff