* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <asm/semaphore.h>
-#include <linux/kdev_t.h>
+#include <linux/config.h>
#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/proc_fs.h>
#include <linux/string.h>
+#include <linux/completion.h>
+#include <linux/kdev_t.h>
#include <linux/ipmi.h>
#include <linux/ipmi_smi.h>
#define PFX "IPMI poweroff: "
-#define IPMI_POWEROFF_VERSION "v33"
/* Where to we insert our poweroff function? */
extern void (*pm_power_off)(void);
+/* Definitions for controlling power off (if the system supports it). It
+ * conveniently matches the IPMI chassis control values. */
+#define IPMI_CHASSIS_POWER_DOWN 0 /* power down, the default. */
+#define IPMI_CHASSIS_POWER_CYCLE 0x02 /* power cycle */
+
+/* the IPMI data command */
+static int poweroff_powercycle;
+
+/* parameter definition to allow user to flag power cycle */
+module_param(poweroff_powercycle, int, 0644);
+MODULE_PARM_DESC(poweroff_powercycle, " Set to non-zero to enable power cycle instead of power down. Power cycle is contingent on hardware support, otherwise it defaults back to power down.");
+
/* Stuff from the get device id command. */
-unsigned int mfg_id;
-unsigned int prod_id;
-unsigned char capabilities;
+static unsigned int mfg_id;
+static unsigned int prod_id;
+static unsigned char capabilities;
+static unsigned char ipmi_version;
/* We use our own messages for this operation, we don't let the system
allocate them, since we may be in a panic situation. The whole
static void receive_handler(struct ipmi_recv_msg *recv_msg, void *handler_data)
{
- struct semaphore *sem = recv_msg->user_msg_data;
+ struct completion *comp = recv_msg->user_msg_data;
- if (sem)
- up(sem);
+ if (comp)
+ complete(comp);
}
static struct ipmi_user_hndl ipmi_poweroff_handler =
struct ipmi_addr *addr,
struct kernel_ipmi_msg *send_msg)
{
- int rv;
- struct semaphore sem;
+ int rv;
+ struct completion comp;
- sema_init (&sem, 0);
+ init_completion(&comp);
- rv = ipmi_request_supply_msgs(user, addr, 0, send_msg, &sem,
+ rv = ipmi_request_supply_msgs(user, addr, 0, send_msg, &comp,
&halt_smi_msg, &halt_recv_msg, 0);
if (rv)
return rv;
- down (&sem);
+ wait_for_completion(&comp);
return halt_recv_msg.msg.data[0];
}
-/* We are in run-to-completion mode, no semaphore is desired. */
+/* We are in run-to-completion mode, no completion is desired. */
static int ipmi_request_in_rc_mode(ipmi_user_t user,
struct ipmi_addr *addr,
struct kernel_ipmi_msg *send_msg)
{
- int rv;
+ int rv;
rv = ipmi_request_supply_msgs(user, addr, 0, send_msg, NULL,
&halt_smi_msg, &halt_recv_msg, 0);
return;
}
+/*
+ * ipmi_dell_chassis_detect()
+ * Dell systems with IPMI < 1.5 don't set the chassis capability bit
+ * but they can handle a chassis poweroff or powercycle command.
+ */
+
+#define DELL_IANA_MFR_ID {0xA2, 0x02, 0x00}
+static int ipmi_dell_chassis_detect (ipmi_user_t user)
+{
+ const char ipmi_version_major = ipmi_version & 0xF;
+ const char ipmi_version_minor = (ipmi_version >> 4) & 0xF;
+ const char mfr[3]=DELL_IANA_MFR_ID;
+ if (!memcmp(mfr, &mfg_id, sizeof(mfr)) &&
+ ipmi_version_major <= 1 &&
+ ipmi_version_minor < 5)
+ return 1;
+ return 0;
+}
+
/*
* Standard chassis support
*/
smi_addr.channel = IPMI_BMC_CHANNEL;
smi_addr.lun = 0;
- printk(KERN_INFO PFX "Powering down via IPMI chassis control command\n");
+ powercyclefailed:
+ printk(KERN_INFO PFX "Powering %s via IPMI chassis control command\n",
+ (poweroff_powercycle ? "cycle" : "down"));
/*
* Power down
*/
send_msg.netfn = IPMI_NETFN_CHASSIS_REQUEST;
send_msg.cmd = IPMI_CHASSIS_CONTROL_CMD;
- data[0] = 0; /* Power down */
+ if (poweroff_powercycle)
+ data[0] = IPMI_CHASSIS_POWER_CYCLE;
+ else
+ data[0] = IPMI_CHASSIS_POWER_DOWN;
send_msg.data = data;
send_msg.data_len = sizeof(data);
rv = ipmi_request_in_rc_mode(user,
(struct ipmi_addr *) &smi_addr,
&send_msg);
if (rv) {
- printk(KERN_ERR PFX "Unable to send chassis powerdown message,"
- " IPMI error 0x%x\n", rv);
- goto out;
+ if (poweroff_powercycle) {
+ /* power cycle failed, default to power down */
+ printk(KERN_ERR PFX "Unable to send chassis power " \
+ "cycle message, IPMI error 0x%x\n", rv);
+ poweroff_powercycle = 0;
+ goto powercyclefailed;
+ }
+
+ printk(KERN_ERR PFX "Unable to send chassis power " \
+ "down message, IPMI error 0x%x\n", rv);
}
-
- out:
- return;
}
};
static struct poweroff_function poweroff_functions[] = {
- { "ATCA", ipmi_atca_detect, ipmi_poweroff_atca },
- { "CPI1", ipmi_cpi1_detect, ipmi_poweroff_cpi1 },
+ { .platform_type = "ATCA",
+ .detect = ipmi_atca_detect,
+ .poweroff_func = ipmi_poweroff_atca },
+ { .platform_type = "CPI1",
+ .detect = ipmi_cpi1_detect,
+ .poweroff_func = ipmi_poweroff_cpi1 },
+ { .platform_type = "chassis",
+ .detect = ipmi_dell_chassis_detect,
+ .poweroff_func = ipmi_poweroff_chassis },
/* Chassis should generally be last, other things should override
it. */
- { "chassis", ipmi_chassis_detect, ipmi_poweroff_chassis },
+ { .platform_type = "chassis",
+ .detect = ipmi_chassis_detect,
+ .poweroff_func = ipmi_poweroff_chassis },
};
#define NUM_PO_FUNCS (sizeof(poweroff_functions) \
/ sizeof(struct poweroff_function))
if (ready)
return;
- rv = ipmi_create_user(if_num, &ipmi_poweroff_handler, NULL, &ipmi_user);
+ rv = ipmi_create_user(if_num, &ipmi_poweroff_handler, NULL,
+ &ipmi_user);
if (rv) {
printk(KERN_ERR PFX "could not create IPMI user, error %d\n",
rv);
prod_id = (halt_recv_msg.msg.data[10]
| (halt_recv_msg.msg.data[11] << 8));
capabilities = halt_recv_msg.msg.data[6];
+ ipmi_version = halt_recv_msg.msg.data[5];
/* Scan for a poweroff method */
- for (i=0; i<NUM_PO_FUNCS; i++) {
+ for (i = 0; i < NUM_PO_FUNCS; i++) {
if (poweroff_functions[i].detect(ipmi_user))
goto found;
}
};
+#ifdef CONFIG_PROC_FS
+#include <linux/sysctl.h>
+
+static ctl_table ipmi_table[] = {
+ { .ctl_name = DEV_IPMI_POWEROFF_POWERCYCLE,
+ .procname = "poweroff_powercycle",
+ .data = &poweroff_powercycle,
+ .maxlen = sizeof(poweroff_powercycle),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec },
+ { }
+};
+
+static ctl_table ipmi_dir_table[] = {
+ { .ctl_name = DEV_IPMI,
+ .procname = "ipmi",
+ .mode = 0555,
+ .child = ipmi_table },
+ { }
+};
+
+static ctl_table ipmi_root_table[] = {
+ { .ctl_name = CTL_DEV,
+ .procname = "dev",
+ .mode = 0555,
+ .child = ipmi_dir_table },
+ { }
+};
+
+static struct ctl_table_header *ipmi_table_header;
+#endif /* CONFIG_PROC_FS */
+
/*
* Startup and shutdown functions.
*/
int rv;
printk ("Copyright (C) 2004 MontaVista Software -"
- " IPMI Powerdown via sys_reboot version "
- IPMI_POWEROFF_VERSION ".\n");
+ " IPMI Powerdown via sys_reboot.\n");
+
+ if (poweroff_powercycle)
+ printk(KERN_INFO PFX "Power cycle is enabled.\n");
+
+#ifdef CONFIG_PROC_FS
+ ipmi_table_header = register_sysctl_table(ipmi_root_table, 1);
+ if (!ipmi_table_header) {
+ printk(KERN_ERR PFX "Unable to register powercycle sysctl\n");
+ rv = -ENOMEM;
+ goto out_err;
+ }
+#endif
rv = ipmi_smi_watcher_register(&smi_watcher);
- if (rv)
+
+#ifdef CONFIG_PROC_FS
+ if (rv) {
+ unregister_sysctl_table(ipmi_table_header);
printk(KERN_ERR PFX "Unable to register SMI watcher: %d\n", rv);
+ goto out_err;
+ }
+#endif
+ out_err:
return rv;
}
{
int rv;
+#ifdef CONFIG_PROC_FS
+ unregister_sysctl_table(ipmi_table_header);
+#endif
+
ipmi_smi_watcher_unregister(&smi_watcher);
if (ready) {
module_init(ipmi_poweroff_init);
MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>");
+MODULE_DESCRIPTION("IPMI Poweroff extension to sys_reboot");