#include <linux/init.h>
#include <linux/devfs_fs_kernel.h>
#include <linux/device.h>
+#include <linux/wait.h>
#include <asm/io.h>
#include <asm/uaccess.h>
/*{ BRD_ECP, 0x2a0, 0, 0xcc000, 0, 0 },*/
};
-static int stli_nrbrds = sizeof(stli_brdconf) / sizeof(stlconf_t);
+static int stli_nrbrds = ARRAY_SIZE(stli_brdconf);
/*
* There is some experimental EISA board detection code in this driver.
* is already swapping a shared buffer won't make things any worse.
*/
static char *stli_tmpwritebuf;
-static DECLARE_MUTEX(stli_tmpwritesem);
#define STLI_TXBUFSIZE 4096
MODULE_LICENSE("GPL");
-MODULE_PARM(board0, "1-3s");
+module_param_array(board0, charp, NULL, 0);
MODULE_PARM_DESC(board0, "Board 0 config -> name[,ioaddr[,memaddr]");
-MODULE_PARM(board1, "1-3s");
+module_param_array(board1, charp, NULL, 0);
MODULE_PARM_DESC(board1, "Board 1 config -> name[,ioaddr[,memaddr]");
-MODULE_PARM(board2, "1-3s");
+module_param_array(board2, charp, NULL, 0);
MODULE_PARM_DESC(board2, "Board 2 config -> name[,ioaddr[,memaddr]");
-MODULE_PARM(board3, "1-3s");
+module_param_array(board3, charp, NULL, 0);
MODULE_PARM_DESC(board3, "Board 3 config -> name[,ioaddr[,memaddr]");
#endif
0xff000000, 0xff010000, 0xff020000, 0xff030000,
};
-static int stli_eisamempsize = sizeof(stli_eisamemprobeaddrs) / sizeof(unsigned long);
-int stli_eisaprobe = STLI_EISAPROBE;
+static int stli_eisamempsize = ARRAY_SIZE(stli_eisamemprobeaddrs);
/*
* Define the Stallion PCI vendor and device IDs.
int stli_init(void);
static int stli_open(struct tty_struct *tty, struct file *filp);
static void stli_close(struct tty_struct *tty, struct file *filp);
-static int stli_write(struct tty_struct *tty, int from_user, const unsigned char *buf, int count);
+static int stli_write(struct tty_struct *tty, const unsigned char *buf, int count);
static void stli_putchar(struct tty_struct *tty, unsigned char ch);
static void stli_flushchars(struct tty_struct *tty);
static int stli_writeroom(struct tty_struct *tty);
static int stli_rawclose(stlibrd_t *brdp, stliport_t *portp, unsigned long arg, int wait);
static int stli_waitcarrier(stlibrd_t *brdp, stliport_t *portp, struct file *filp);
static void stli_dohangup(void *arg);
-static void stli_delay(int len);
static int stli_setport(stliport_t *portp);
static int stli_cmdwait(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback);
static void stli_sendcmd(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback);
static int stli_clrportstats(stliport_t *portp, comstats_t __user *cp);
static int stli_getportstruct(stliport_t __user *arg);
static int stli_getbrdstruct(stlibrd_t __user *arg);
-static void *stli_memalloc(int len);
static stlibrd_t *stli_allocbrd(void);
static void stli_ecpinit(stlibrd_t *brdp);
* much cheaper on host cpu than using interrupts. It turns out to
* not increase character latency by much either...
*/
-static struct timer_list stli_timerlist = TIMER_INITIALIZER(stli_poll, 0, 0);
+static DEFINE_TIMER(stli_timerlist, stli_poll, 0, 0);
static int stli_timeron;
/*****************************************************************************/
-static struct class_simple *istallion_class;
+static struct class *istallion_class;
#ifdef MODULE
put_tty_driver(stli_serial);
for (i = 0; i < 4; i++) {
devfs_remove("staliomem/%d", i);
- class_simple_device_remove(MKDEV(STL_SIOMEMMAJOR, i));
+ class_device_destroy(istallion_class, MKDEV(STL_SIOMEMMAJOR, i));
}
devfs_remove("staliomem");
- class_simple_destroy(istallion_class);
+ class_destroy(istallion_class);
if ((i = unregister_chrdev(STL_SIOMEMMAJOR, "staliomem")))
printk("STALLION: failed to un-register serial memory device, "
"errno=%d\n", -i);
- if (stli_tmpwritebuf != (char *) NULL)
- kfree(stli_tmpwritebuf);
- if (stli_txcookbuf != (char *) NULL)
- kfree(stli_txcookbuf);
+
+ kfree(stli_tmpwritebuf);
+ kfree(stli_txcookbuf);
for (i = 0; (i < stli_nrbrds); i++) {
if ((brdp = stli_brds[i]) == (stlibrd_t *) NULL)
{
stlconf_t conf;
stlibrd_t *brdp;
- int nrargs, i;
+ int i;
#ifdef DEBUG
printk("stli_argbrds()\n");
#endif
- nrargs = sizeof(stli_brdsp) / sizeof(char **);
-
- for (i = stli_nrbrds; (i < nrargs); i++) {
+ for (i = stli_nrbrds; i < ARRAY_SIZE(stli_brdsp); i++) {
memset(&conf, 0, sizeof(conf));
if (stli_parsebrd(&conf, stli_brdsp[i]) == 0)
continue;
static int stli_parsebrd(stlconf_t *confp, char **argp)
{
char *sp;
- int nrbrdnames, i;
+ int i;
#ifdef DEBUG
printk("stli_parsebrd(confp=%x,argp=%x)\n", (int) confp, (int) argp);
for (sp = argp[0], i = 0; ((*sp != 0) && (i < 25)); sp++, i++)
*sp = TOLOWER(*sp);
- nrbrdnames = sizeof(stli_brdstr) / sizeof(stlibrdtype_t);
- for (i = 0; (i < nrbrdnames); i++) {
+ for (i = 0; i < ARRAY_SIZE(stli_brdstr); i++) {
if (strcmp(stli_brdstr[i].name, argp[0]) == 0)
break;
}
- if (i >= nrbrdnames) {
+ if (i == ARRAY_SIZE(stli_brdstr)) {
printk("STALLION: unknown board name, %s?\n", argp[0]);
- return(0);
+ return 0;
}
confp->brdtype = stli_brdstr[i].type;
/*****************************************************************************/
-/*
- * Local driver kernel malloc routine.
- */
-
-static void *stli_memalloc(int len)
-{
- return((void *) kmalloc(len, GFP_KERNEL));
-}
-
-/*****************************************************************************/
-
static int stli_open(struct tty_struct *tty, struct file *filp)
{
stlibrd_t *brdp;
tty->driver_data = portp;
portp->refcount++;
- while (test_bit(ST_INITIALIZING, &portp->state)) {
- if (signal_pending(current))
- return(-ERESTARTSYS);
- interruptible_sleep_on(&portp->raw_wait);
- }
+ wait_event_interruptible(portp->raw_wait,
+ !test_bit(ST_INITIALIZING, &portp->state));
+ if (signal_pending(current))
+ return(-ERESTARTSYS);
if ((portp->flags & ASYNC_INITIALIZED) == 0) {
set_bit(ST_INITIALIZING, &portp->state);
if (portp->openwaitcnt) {
if (portp->close_delay)
- stli_delay(portp->close_delay);
+ msleep_interruptible(jiffies_to_msecs(portp->close_delay));
wake_up_interruptible(&portp->open_wait);
}
* order of opens and closes may not be preserved across shared
* memory, so we must wait until it is complete.
*/
- while (test_bit(ST_CLOSING, &portp->state)) {
- if (signal_pending(current)) {
- restore_flags(flags);
- return(-ERESTARTSYS);
- }
- interruptible_sleep_on(&portp->raw_wait);
+ wait_event_interruptible(portp->raw_wait,
+ !test_bit(ST_CLOSING, &portp->state));
+ if (signal_pending(current)) {
+ restore_flags(flags);
+ return -ERESTARTSYS;
}
/*
*/
rc = 0;
set_bit(ST_OPENING, &portp->state);
- while (test_bit(ST_OPENING, &portp->state)) {
- if (signal_pending(current)) {
- rc = -ERESTARTSYS;
- break;
- }
- interruptible_sleep_on(&portp->raw_wait);
- }
+ wait_event_interruptible(portp->raw_wait,
+ !test_bit(ST_OPENING, &portp->state));
+ if (signal_pending(current))
+ rc = -ERESTARTSYS;
restore_flags(flags);
if ((rc == 0) && (portp->rc != 0))
* occurs on this port.
*/
if (wait) {
- while (test_bit(ST_CLOSING, &portp->state)) {
- if (signal_pending(current)) {
- restore_flags(flags);
- return(-ERESTARTSYS);
- }
- interruptible_sleep_on(&portp->raw_wait);
+ wait_event_interruptible(portp->raw_wait,
+ !test_bit(ST_CLOSING, &portp->state));
+ if (signal_pending(current)) {
+ restore_flags(flags);
+ return -ERESTARTSYS;
}
}
* to come back.
*/
rc = 0;
- while (test_bit(ST_CLOSING, &portp->state)) {
- if (signal_pending(current)) {
- rc = -ERESTARTSYS;
- break;
- }
- interruptible_sleep_on(&portp->raw_wait);
- }
+ wait_event_interruptible(portp->raw_wait,
+ !test_bit(ST_CLOSING, &portp->state));
+ if (signal_pending(current))
+ rc = -ERESTARTSYS;
restore_flags(flags);
if ((rc == 0) && (portp->rc != 0))
save_flags(flags);
cli();
- while (test_bit(ST_CMDING, &portp->state)) {
- if (signal_pending(current)) {
- restore_flags(flags);
- return(-ERESTARTSYS);
- }
- interruptible_sleep_on(&portp->raw_wait);
+ wait_event_interruptible(portp->raw_wait,
+ !test_bit(ST_CMDING, &portp->state));
+ if (signal_pending(current)) {
+ restore_flags(flags);
+ return -ERESTARTSYS;
}
stli_sendcmd(brdp, portp, cmd, arg, size, copyback);
- while (test_bit(ST_CMDING, &portp->state)) {
- if (signal_pending(current)) {
- restore_flags(flags);
- return(-ERESTARTSYS);
- }
- interruptible_sleep_on(&portp->raw_wait);
+ wait_event_interruptible(portp->raw_wait,
+ !test_bit(ST_CMDING, &portp->state));
+ if (signal_pending(current)) {
+ restore_flags(flags);
+ return -ERESTARTSYS;
}
restore_flags(flags);
/*****************************************************************************/
-/*
- * Wait for a specified delay period, this is not a busy-loop. It will
- * give up the processor while waiting. Unfortunately this has some
- * rather intimate knowledge of the process management stuff.
- */
-
-static void stli_delay(int len)
-{
-#ifdef DEBUG
- printk("stli_delay(len=%d)\n", len);
-#endif
- if (len > 0) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(len);
- }
-}
-
-/*****************************************************************************/
-
/*
* Possibly need to wait for carrier (DCD signal) to come high. Say
* maybe because if we are clocal then we don't need to wait...
* service bits for this port.
*/
-static int stli_write(struct tty_struct *tty, int from_user, const unsigned char *buf, int count)
+static int stli_write(struct tty_struct *tty, const unsigned char *buf, int count)
{
volatile cdkasy_t *ap;
volatile cdkhdr_t *hdrp;
unsigned long flags;
#ifdef DEBUG
- printk("stli_write(tty=%x,from_user=%d,buf=%x,count=%d)\n",
- (int) tty, from_user, (int) buf, count);
+ printk("stli_write(tty=%x,buf=%x,count=%d)\n",
+ (int) tty, (int) buf, count);
#endif
if ((tty == (struct tty_struct *) NULL) ||
return(0);
chbuf = (unsigned char *) buf;
-/*
- * If copying direct from user space we need to be able to handle page
- * faults while we are copying. To do this copy as much as we can now
- * into a kernel buffer. From there we copy it into shared memory. The
- * big problem is that we do not want shared memory enabled when we are
- * sleeping (other boards may be serviced while asleep). Something else
- * to note here is the reading of the tail twice. Since the boards
- * shared memory can be on an 8-bit bus then we need to be very careful
- * reading 16 bit quantities - since both the board (slave) and host
- * could be writing and reading at the same time.
- */
- if (from_user) {
- save_flags(flags);
- cli();
- EBRDENABLE(brdp);
- ap = (volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr);
- head = (unsigned int) ap->txq.head;
- tail = (unsigned int) ap->txq.tail;
- if (tail != ((unsigned int) ap->txq.tail))
- tail = (unsigned int) ap->txq.tail;
- len = (head >= tail) ? (portp->txsize - (head - tail) - 1) :
- (tail - head - 1);
- count = MIN(len, count);
- EBRDDISABLE(brdp);
- restore_flags(flags);
-
- down(&stli_tmpwritesem);
- if (copy_from_user(stli_tmpwritebuf, chbuf, count))
- return -EFAULT;
- chbuf = &stli_tmpwritebuf[0];
- }
-
/*
* All data is now local, shove as much as possible into shared memory.
*/
set_bit(ST_TXBUSY, &portp->state);
EBRDDISABLE(brdp);
- if (from_user)
- up(&stli_tmpwritesem);
restore_flags(flags);
return(count);
while (test_bit(ST_TXBUSY, &portp->state)) {
if (signal_pending(current))
break;
- stli_delay(2);
+ msleep_interruptible(20);
if (time_after_eq(jiffies, tend))
break;
}
stlen = size - tail;
}
- len = MIN(len, (TTY_FLIPBUF_SIZE - tty->flip.count));
+ len = tty_buffer_request_room(tty, len);
+ /* FIXME : iomap ? */
shbuf = (volatile char *) EBRDGETMEMPTR(brdp, portp->rxoffset);
while (len > 0) {
stlen = MIN(len, stlen);
- memcpy(tty->flip.char_buf_ptr, (char *) (shbuf + tail), stlen);
- memset(tty->flip.flag_buf_ptr, 0, stlen);
- tty->flip.char_buf_ptr += stlen;
- tty->flip.flag_buf_ptr += stlen;
- tty->flip.count += stlen;
-
+ tty_insert_flip_string(tty, (char *)(shbuf + tail), stlen);
len -= stlen;
tail += stlen;
if (tail >= size) {
if ((nt.data & DT_RXBREAK) && (portp->rxmarkmsk & BRKINT)) {
if (tty != (struct tty_struct *) NULL) {
- if (tty->flip.count < TTY_FLIPBUF_SIZE) {
- tty->flip.count++;
- *tty->flip.flag_buf_ptr++ = TTY_BREAK;
- *tty->flip.char_buf_ptr++ = 0;
- if (portp->flags & ASYNC_SAK) {
- do_SAK(tty);
- EBRDENABLE(brdp);
- }
- tty_schedule_flip(tty);
+ tty_insert_flip_char(tty, 0, TTY_BREAK);
+ if (portp->flags & ASYNC_SAK) {
+ do_SAK(tty);
+ EBRDENABLE(brdp);
}
+ tty_schedule_flip(tty);
}
}
#endif
for (i = 0, panelnr = 0, panelport = 0; (i < brdp->nrports); i++) {
- portp = (stliport_t *) stli_memalloc(sizeof(stliport_t));
- if (portp == (stliport_t *) NULL) {
+ portp = kzalloc(sizeof(stliport_t), GFP_KERNEL);
+ if (!portp) {
printk("STALLION: failed to allocate port structure\n");
continue;
}
- memset(portp, 0, sizeof(stliport_t));
portp->magic = STLI_PORTMAGIC;
portp->portnr = i;
portp->brdnr = brdp->brdnr;
{
stlibrd_t *brdp;
- brdp = (stlibrd_t *) stli_memalloc(sizeof(stlibrd_t));
- if (brdp == (stlibrd_t *) NULL) {
+ brdp = kzalloc(sizeof(stlibrd_t), GFP_KERNEL);
+ if (!brdp) {
printk(KERN_ERR "STALLION: failed to allocate memory "
"(size=%d)\n", sizeof(stlibrd_t));
- return((stlibrd_t *) NULL);
+ return NULL;
}
- memset(brdp, 0, sizeof(stlibrd_t));
brdp->magic = STLI_BOARDMAGIC;
return(brdp);
}
#ifdef MODULE
stli_argbrds();
#endif
- if (stli_eisaprobe)
+ if (STLI_EISAPROBE)
stli_findeisabrds();
#ifdef CONFIG_PCI
stli_findpcibrds();
if (portp->tty != (struct tty_struct *) NULL) {
if (portp->tty->driver_data == portp) {
stli_comstats.ttystate = portp->tty->flags;
- stli_comstats.rxbuffered = portp->tty->flip.count;
+ stli_comstats.rxbuffered = -1 /*portp->tty->flip.count*/;
if (portp->tty->termios != (struct termios *) NULL) {
stli_comstats.cflags = portp->tty->termios->c_cflag;
stli_comstats.iflags = portp->tty->termios->c_iflag;
/*
* Allocate a temporary write buffer.
*/
- stli_tmpwritebuf = (char *) stli_memalloc(STLI_TXBUFSIZE);
- if (stli_tmpwritebuf == (char *) NULL)
+ stli_tmpwritebuf = kmalloc(STLI_TXBUFSIZE, GFP_KERNEL);
+ if (!stli_tmpwritebuf)
printk(KERN_ERR "STALLION: failed to allocate memory "
"(size=%d)\n", STLI_TXBUFSIZE);
- stli_txcookbuf = stli_memalloc(STLI_TXBUFSIZE);
- if (stli_txcookbuf == (char *) NULL)
+ stli_txcookbuf = kmalloc(STLI_TXBUFSIZE, GFP_KERNEL);
+ if (!stli_txcookbuf)
printk(KERN_ERR "STALLION: failed to allocate memory "
"(size=%d)\n", STLI_TXBUFSIZE);
"device\n");
devfs_mk_dir("staliomem");
- istallion_class = class_simple_create(THIS_MODULE, "staliomem");
+ istallion_class = class_create(THIS_MODULE, "staliomem");
for (i = 0; i < 4; i++) {
devfs_mk_cdev(MKDEV(STL_SIOMEMMAJOR, i),
S_IFCHR | S_IRUSR | S_IWUSR,
"staliomem/%d", i);
- class_simple_device_add(istallion_class, MKDEV(STL_SIOMEMMAJOR, i),
+ class_device_create(istallion_class, NULL,
+ MKDEV(STL_SIOMEMMAJOR, i),
NULL, "staliomem%d", i);
}
git://git.onelab.eu / linux-2.6.git / blobdiff