#include <asm/amigahw.h>
#include <linux/zorro.h>
#include <asm/irq.h>
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/serial.h>
#include <linux/generic_serial.h>
+#include <linux/tty_flip.h>
#include "ser_a2232.h"
#include "ser_a2232fw.h"
/***************************** Prototypes ***************************/
/* The interrupt service routine */
-static irqreturn_t a2232_vbl_inter(int irq, void *data, struct pt_regs *fp);
+static irqreturn_t a2232_vbl_inter(int irq, void *data);
/* Initialize the port structures */
static void a2232_init_portstructs(void);
/* Initialize and register TTY drivers. */
*/
struct tty_struct *tty = port->gs.tty;
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- return;
-
- tty->flip.count++;
-
#if 0
switch(err) {
case TTY_BREAK:
}
#endif
- *tty->flip.flag_buf_ptr++ = err;
- *tty->flip.char_buf_ptr++ = ch;
+ tty_insert_flip_char(tty, ch, err);
tty_flip_buffer_push(tty);
}
}
/*** END OF FUNCTIONS EXPECTED BY TTY DRIVER STRUCTS ***/
-static irqreturn_t a2232_vbl_inter(int irq, void *data, struct pt_regs *fp)
+static irqreturn_t a2232_vbl_inter(int irq, void *data)
{
#if A2232_IOBUFLEN != 256
#error "Re-Implement a2232_vbl_inter()!"
/* WakeUp if output buffer runs low */
if ((port->gs.xmit_cnt <= port->gs.wakeup_chars) && port->gs.tty) {
- if ((port->gs.tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && port->gs.tty->ldisc.write_wakeup){
- (port->gs.tty->ldisc.write_wakeup)(port->gs.tty);
- }
- wake_up_interruptible(&port->gs.tty->write_wait);
+ tty_wakeup(port->gs.tty);
}
} // if the port is used
} // for every port on the board
port->gs.closing_wait = 30 * HZ;
port->gs.rd = &a2232_real_driver;
#ifdef NEW_WRITE_LOCKING
- init_MUTEX(&(port->gs.port_write_sem));
+ init_MUTEX(&(port->gs.port_write_mutex));
#endif
init_waitqueue_head(&port->gs.open_wait);
init_waitqueue_head(&port->gs.close_wait);
}
}
-static struct tty_operations a2232_ops = {
+static const struct tty_operations a2232_ops = {
.open = a2232_open,
.close = gs_close,
.write = gs_write,
a2232_driver->init_termios = tty_std_termios;
a2232_driver->init_termios.c_cflag =
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ a2232_driver->init_termios.c_ispeed = 9600;
+ a2232_driver->init_termios.c_ospeed = 9600;
a2232_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(a2232_driver, &a2232_ops);
if ((error = tty_register_driver(a2232_driver))) {
}
- printk("Total: %d A2232 boards initialized.\n.", nr_a2232); /* Some status report if no card was found */
+ printk("Total: %d A2232 boards initialized.\n", nr_a2232); /* Some status report if no card was found */
a2232_init_portstructs();