*
*/
-#define VERSION "1.10"
+#define VERSION "1.11"
/*
* There is a bunch of documentation about the card, jumpers, config
* settings, restrictions, cables, device names and numbers in
- * ../../Documentation/specialix.txt
+ * Documentation/specialix.txt
*/
#include <linux/config.h>
#include "cd1865.h"
+/*
+ This driver can spew a whole lot of debugging output at you. If you
+ need maximum performance, you should disable the DEBUG define. To
+ aid in debugging in the field, I'm leaving the compile-time debug
+ features enabled, and disable them "runtime". That allows me to
+ instruct people with problems to enable debugging without requiring
+ them to recompile...
+*/
+#define DEBUG
+
+static int sx_debug;
+static int sx_rxfifo = SPECIALIX_RXFIFO;
+
+#ifdef DEBUG
+#define dprintk(f, str...) if (sx_debug & f) printk (str)
+#else
+#define dprintk(f, str...) /* nothing */
+#endif
+
+#define SX_DEBUG_FLOW 0x0001
+#define SX_DEBUG_DATA 0x0002
+#define SX_DEBUG_PROBE 0x0004
+#define SX_DEBUG_CHAN 0x0008
+#define SX_DEBUG_INIT 0x0010
+#define SX_DEBUG_RX 0x0020
+#define SX_DEBUG_TX 0x0040
+#define SX_DEBUG_IRQ 0x0080
+#define SX_DEBUG_OPEN 0x0100
+#define SX_DEBUG_TERMIOS 0x0200
+#define SX_DEBUG_SIGNALS 0x0400
+#define SX_DEBUG_FIFO 0x0800
+
+
+#define func_enter() dprintk (SX_DEBUG_FLOW, "io8: enter %s\n",__FUNCTION__)
+#define func_exit() dprintk (SX_DEBUG_FLOW, "io8: exit %s\n", __FUNCTION__)
+
+#define jiffies_from_ms(a) ((((a) * HZ)/1000)+1)
+
/* Configurable options: */
requiring attention, the timer doesn't help either. */
#undef SPECIALIX_TIMER
+#ifdef SPECIALIX_TIMER
+static int sx_poll = HZ;
+#endif
+
+
+
/*
* The following defines are mostly for testing purposes. But if you need
* some nice reporting in your syslog, you can define them also.
ASYNC_SPD_HI | ASYNC_SPEED_VHI | ASYNC_SESSION_LOCKOUT | \
ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP)
-#ifndef MIN
-#define MIN(a,b) ((a) < (b) ? (a) : (b))
-#endif
-
#undef RS_EVENT_WRITE_WAKEUP
#define RS_EVENT_WRITE_WAKEUP 0
};
static struct specialix_port sx_port[SX_NBOARD * SX_NPORT];
-
+
#ifdef SPECIALIX_TIMER
static struct timer_list missed_irq_timer;
/* Wait for Channel Command Register ready */
static inline void sx_wait_CCR(struct specialix_board * bp)
{
- unsigned long delay;
-
- for (delay = SX_CCR_TIMEOUT; delay; delay--)
- if (!sx_in(bp, CD186x_CCR))
+ unsigned long delay, flags;
+ unsigned char ccr;
+
+ for (delay = SX_CCR_TIMEOUT; delay; delay--) {
+ spin_lock_irqsave(&bp->lock, flags);
+ ccr = sx_in(bp, CD186x_CCR);
+ spin_unlock_irqrestore(&bp->lock, flags);
+ if (!ccr)
return;
+ udelay (1);
+ }
printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp));
}
static inline void sx_wait_CCR_off(struct specialix_board * bp)
{
unsigned long delay;
+ unsigned char crr;
+ unsigned long flags;
- for (delay = SX_CCR_TIMEOUT; delay; delay--)
- if (!sx_in_off(bp, CD186x_CCR))
+ for (delay = SX_CCR_TIMEOUT; delay; delay--) {
+ spin_lock_irqsave(&bp->lock, flags);
+ crr = sx_in_off(bp, CD186x_CCR);
+ spin_unlock_irqrestore(&bp->lock, flags);
+ if (!crr)
return;
+ udelay (1);
+ }
printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp));
}
/* Set the IRQ using the RTS lines that run to the PAL on the board.... */
-int sx_set_irq ( struct specialix_board *bp)
+static int sx_set_irq ( struct specialix_board *bp)
{
int virq;
int i;
+ unsigned long flags;
if (bp->flags & SX_BOARD_IS_PCI)
return 1;
default: printk (KERN_ERR "Speclialix: cannot set irq to %d.\n", bp->irq);
return 0;
}
-
+ spin_lock_irqsave(&bp->lock, flags);
for (i=0;i<2;i++) {
sx_out(bp, CD186x_CAR, i);
sx_out(bp, CD186x_MSVRTS, ((virq >> i) & 0x1)? MSVR_RTS:0);
}
+ spin_unlock_irqrestore(&bp->lock, flags);
return 1;
}
unsigned long flags;
int scaler;
int rv = 1;
-
- save_flags(flags); cli();
+ func_enter();
sx_wait_CCR_off(bp); /* Wait for CCR ready */
+ spin_lock_irqsave(&bp->lock, flags);
sx_out_off(bp, CD186x_CCR, CCR_HARDRESET); /* Reset CD186x chip */
- sti();
+ spin_unlock_irqrestore(&bp->lock, flags);
sx_long_delay(HZ/20); /* Delay 0.05 sec */
- cli();
+ spin_lock_irqsave(&bp->lock, flags);
sx_out_off(bp, CD186x_GIVR, SX_ID); /* Set ID for this chip */
sx_out_off(bp, CD186x_GICR, 0); /* Clear all bits */
sx_out_off(bp, CD186x_PILR1, SX_ACK_MINT); /* Prio for modem intr */
sx_out_off(bp, CD186x_PPRH, scaler >> 8);
sx_out_off(bp, CD186x_PPRL, scaler & 0xff);
+ spin_unlock_irqrestore(&bp->lock, flags);
if (!sx_set_irq (bp)) {
/* Figure out how to pass this along... */
rv = 0;
}
- restore_flags(flags);
+ func_exit();
return rv;
}
-int read_cross_byte (struct specialix_board *bp, int reg, int bit)
+static int read_cross_byte (struct specialix_board *bp, int reg, int bit)
{
int i;
int t;
+ unsigned long flags;
+ spin_lock_irqsave(&bp->lock, flags);
for (i=0, t=0;i<8;i++) {
sx_out_off (bp, CD186x_CAR, i);
if (sx_in_off (bp, reg) & bit)
t |= 1 << i;
}
+ spin_unlock_irqrestore(&bp->lock, flags);
+
return t;
}
#ifdef SPECIALIX_TIMER
void missed_irq (unsigned long data)
{
- if (sx_in ((struct specialix_board *)data, CD186x_SRSR) &
+ unsigned char irq;
+ unsigned long flags;
+ struct specialix_board *bp = (struct specialix_board *)data;
+
+ spin_lock_irqsave(&bp->lock, flags);
+ irq = sx_in ((struct specialix_board *)data, CD186x_SRSR) &
(SRSR_RREQint |
SRSR_TREQint |
- SRSR_MREQint)) {
+ SRSR_MREQint);
+ spin_unlock_irqrestore(&bp->lock, flags);
+ if (irq) {
printk (KERN_INFO "Missed interrupt... Calling int from timer. \n");
sx_interrupt (((struct specialix_board *)data)->irq,
- NULL, NULL);
+ (void*)data, NULL);
}
- missed_irq_timer.expires = jiffies + HZ;
+ missed_irq_timer.expires = jiffies + sx_poll;
add_timer (&missed_irq_timer);
}
#endif
int rev;
int chip;
- if (sx_check_io_range(bp))
+ func_enter();
+
+ if (sx_check_io_range(bp)) {
+ func_exit();
return 1;
+ }
/* Are the I/O ports here ? */
sx_out_off(bp, CD186x_PPRL, 0x5a);
if ((val1 != 0x5a) || (val2 != 0xa5)) {
printk(KERN_INFO "sx%d: specialix IO8+ Board at 0x%03x not found.\n",
board_No(bp), bp->base);
+ func_exit();
return 1;
}
identification */
val1 = read_cross_byte (bp, CD186x_MSVR, MSVR_DSR);
val2 = read_cross_byte (bp, CD186x_MSVR, MSVR_RTS);
-#ifdef SPECIALIX_DEBUG
- printk (KERN_DEBUG "sx%d: DSR lines are: %02x, rts lines are: %02x\n",
+ dprintk (SX_DEBUG_INIT, "sx%d: DSR lines are: %02x, rts lines are: %02x\n",
board_No(bp), val1, val2);
-#endif
+
/* They managed to switch the bit order between the docs and
the IO8+ card. The new PCI card now conforms to old docs.
They changed the PCI docs to reflect the situation on the
if (val1 != val2) {
printk(KERN_INFO "sx%d: specialix IO8+ ID %02x at 0x%03x not found (%02x).\n",
board_No(bp), val2, bp->base, val1);
+ func_exit();
return 1;
}
sx_long_delay(HZ/20);
irqs = probe_irq_off(irqs);
-#if SPECIALIX_DEBUG > 2
- printk (KERN_DEBUG "SRSR = %02x, ", sx_in(bp, CD186x_SRSR));
- printk ( "TRAR = %02x, ", sx_in(bp, CD186x_TRAR));
- printk ( "GIVR = %02x, ", sx_in(bp, CD186x_GIVR));
- printk ( "GICR = %02x, ", sx_in(bp, CD186x_GICR));
- printk ( "\n");
-#endif
+ dprintk (SX_DEBUG_INIT, "SRSR = %02x, ", sx_in(bp, CD186x_SRSR));
+ dprintk (SX_DEBUG_INIT, "TRAR = %02x, ", sx_in(bp, CD186x_TRAR));
+ dprintk (SX_DEBUG_INIT, "GIVR = %02x, ", sx_in(bp, CD186x_GIVR));
+ dprintk (SX_DEBUG_INIT, "GICR = %02x, ", sx_in(bp, CD186x_GICR));
+ dprintk (SX_DEBUG_INIT, "\n");
+
/* Reset CD186x again */
if (!sx_init_CD186x(bp)) {
/* Hmmm. This is dead code anyway. */
}
-#if SPECIALIX_DEBUG > 2
- printk (KERN_DEBUG "val1 = %02x, val2 = %02x, val3 = %02x.\n",
+
+ dprintk (SX_DEBUG_INIT "val1 = %02x, val2 = %02x, val3 = %02x.\n",
val1, val2, val3);
-#endif
}
if (irqs <= 0) {
printk(KERN_ERR "sx%d: Can't find IRQ for specialix IO8+ board at 0x%03x.\n",
board_No(bp), bp->base);
+ func_exit();
return 1;
}
#endif
#endif
/* Reset CD186x again */
if (!sx_init_CD186x(bp)) {
+ func_exit();
return -EIO;
}
default:chip=-1;rev='x';
}
-#if SPECIALIX_DEBUG > 2
- printk (KERN_DEBUG " GFCR = 0x%02x\n", sx_in_off(bp, CD186x_GFRCR) );
-#endif
+ dprintk (SX_DEBUG_INIT, " GFCR = 0x%02x\n", sx_in_off(bp, CD186x_GFRCR) );
#ifdef SPECIALIX_TIMER
init_timer (&missed_irq_timer);
missed_irq_timer.function = missed_irq;
missed_irq_timer.data = (unsigned long) bp;
- missed_irq_timer.expires = jiffies + HZ;
+ missed_irq_timer.expires = jiffies + sx_poll;
add_timer (&missed_irq_timer);
#endif
bp->base, bp->irq,
chip, rev);
+ func_exit();
return 0;
}
static inline void sx_mark_event(struct specialix_port * port, int event)
{
+ func_enter();
+
set_bit(event, &port->event);
schedule_work(&port->tqueue);
+
+ func_exit();
}
unsigned char const * what)
{
unsigned char channel;
- struct specialix_port * port;
-
+ struct specialix_port * port = NULL;
+
channel = sx_in(bp, CD186x_GICR) >> GICR_CHAN_OFF;
+ dprintk (SX_DEBUG_CHAN, "channel: %d\n", channel);
if (channel < CD186x_NCH) {
port = &sx_port[board_No(bp) * SX_NPORT + channel];
+ dprintk (SX_DEBUG_CHAN, "port: %d %p flags: 0x%x\n",board_No(bp) * SX_NPORT + channel, port, port->flags & ASYNC_INITIALIZED);
+
if (port->flags & ASYNC_INITIALIZED) {
+ dprintk (SX_DEBUG_CHAN, "port: %d %p\n", channel, port);
+ func_exit();
return port;
}
}
unsigned char status;
unsigned char ch;
- if (!(port = sx_get_port(bp, "Receive")))
- return;
+ func_enter();
- tty = port->tty;
- if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
- printk(KERN_INFO "sx%d: port %d: Working around flip buffer overflow.\n",
- board_No(bp), port_No(port));
+ port = sx_get_port(bp, "Receive");
+ if (!port) {
+ dprintk (SX_DEBUG_RX, "Hmm, couldn't find port.\n");
+ func_exit();
return;
}
+ tty = port->tty;
+ dprintk (SX_DEBUG_RX, "port: %p count: %d BUFF_SIZE: %d\n",
+ port, tty->flip.count, TTY_FLIPBUF_SIZE);
-#ifdef SX_REPORT_OVERRUN
status = sx_in(bp, CD186x_RCSR);
+
+ dprintk (SX_DEBUG_RX, "status: 0x%x\n", status);
if (status & RCSR_OE) {
port->overrun++;
-#if SPECIALIX_DEBUG
- printk(KERN_DEBUG "sx%d: port %d: Overrun. Total %ld overruns.\n",
+ dprintk(SX_DEBUG_FIFO, "sx%d: port %d: Overrun. Total %ld overruns.\n",
board_No(bp), port_No(port), port->overrun);
-#endif
}
status &= port->mark_mask;
-#else
- status = sx_in(bp, CD186x_RCSR) & port->mark_mask;
-#endif
+
+ /* This flip buffer check needs to be below the reading of the
+ status register to reset the chip's IRQ.... */
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
+ dprintk(SX_DEBUG_FIFO, "sx%d: port %d: Working around flip buffer overflow.\n",
+ board_No(bp), port_No(port));
+ func_exit();
+ return;
+ }
+
ch = sx_in(bp, CD186x_RDR);
if (!status) {
+ func_exit();
return;
}
if (status & RCSR_TOUT) {
printk(KERN_INFO "sx%d: port %d: Receiver timeout. Hardware problems ?\n",
board_No(bp), port_No(port));
+ func_exit();
return;
} else if (status & RCSR_BREAK) {
-#ifdef SPECIALIX_DEBUG
- printk(KERN_DEBUG "sx%d: port %d: Handling break...\n",
+ dprintk(SX_DEBUG_RX, "sx%d: port %d: Handling break...\n",
board_No(bp), port_No(port));
-#endif
*tty->flip.flag_buf_ptr++ = TTY_BREAK;
if (port->flags & ASYNC_SAK)
do_SAK(tty);
*tty->flip.char_buf_ptr++ = ch;
tty->flip.count++;
schedule_delayed_work(&tty->flip.work, 1);
+
+ func_exit();
}
struct specialix_port *port;
struct tty_struct *tty;
unsigned char count;
+
+ func_enter();
- if (!(port = sx_get_port(bp, "Receive")))
+ if (!(port = sx_get_port(bp, "Receive"))) {
+ dprintk (SX_DEBUG_RX, "Hmm, couldn't find port.\n");
+ func_exit();
return;
-
+ }
tty = port->tty;
count = sx_in(bp, CD186x_RDCR);
-
-#ifdef SX_REPORT_FIFO
+ dprintk (SX_DEBUG_RX, "port: %p: count: %d\n", port, count);
port->hits[count > 8 ? 9 : count]++;
-#endif
while (count--) {
if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
tty->flip.count++;
}
schedule_delayed_work(&tty->flip.work, 1);
+
+ func_exit();
}
struct specialix_port *port;
struct tty_struct *tty;
unsigned char count;
-
-
- if (!(port = sx_get_port(bp, "Transmit")))
+
+ func_enter();
+ if (!(port = sx_get_port(bp, "Transmit"))) {
+ func_exit();
return;
-
+ }
+ dprintk (SX_DEBUG_TX, "port: %p\n", port);
tty = port->tty;
if (port->IER & IER_TXEMPTY) {
sx_out(bp, CD186x_CAR, port_No(port));
port->IER &= ~IER_TXEMPTY;
sx_out(bp, CD186x_IER, port->IER);
+ func_exit();
return;
}
sx_out(bp, CD186x_CAR, port_No(port));
port->IER &= ~IER_TXRDY;
sx_out(bp, CD186x_IER, port->IER);
+ func_exit();
return;
}
sx_out(bp, CD186x_TDR, CD186x_C_SBRK);
port->COR2 &= ~COR2_ETC;
}
- count = MIN(port->break_length, 0xff);
+ count = min_t(int, port->break_length, 0xff);
sx_out(bp, CD186x_TDR, CD186x_C_ESC);
sx_out(bp, CD186x_TDR, CD186x_C_DELAY);
sx_out(bp, CD186x_TDR, count);
sx_out(bp, CD186x_CCR, CCR_CORCHG2);
port->break_length = 0;
}
+
+ func_exit();
return;
}
}
if (port->xmit_cnt <= port->wakeup_chars)
sx_mark_event(port, RS_EVENT_WRITE_WAKEUP);
+
+ func_exit();
}
struct specialix_port *port;
struct tty_struct *tty;
unsigned char mcr;
+ int msvr_cd;
-#ifdef SPECIALIX_DEBUG
- printk (KERN_DEBUG "Modem intr. ");
-#endif
+ dprintk (SX_DEBUG_SIGNALS, "Modem intr. ");
if (!(port = sx_get_port(bp, "Modem")))
return;
printk ("mcr = %02x.\n", mcr);
if ((mcr & MCR_CDCHG)) {
-#ifdef SPECIALIX_DEBUG
- printk (KERN_DEBUG "CD just changed... ");
-#endif
- if (sx_in(bp, CD186x_MSVR) & MSVR_CD) {
-#ifdef SPECIALIX_DEBUG
- printk ( "Waking up guys in open.\n");
-#endif
+ dprintk (SX_DEBUG_SIGNALS, "CD just changed... ");
+ msvr_cd = sx_in(bp, CD186x_MSVR) & MSVR_CD;
+ if (msvr_cd) {
+ dprintk (SX_DEBUG_SIGNALS, "Waking up guys in open.\n");
wake_up_interruptible(&port->open_wait);
} else {
-#ifdef SPECIALIX_DEBUG
- printk ( "Sending HUP.\n");
-#endif
+ dprintk (SX_DEBUG_SIGNALS, "Sending HUP.\n");
schedule_work(&port->tqueue_hangup);
}
}
struct specialix_board *bp;
unsigned long loop = 0;
int saved_reg;
+ unsigned long flags;
+
+ func_enter();
bp = dev_id;
-
+ spin_lock_irqsave(&bp->lock, flags);
+
+ dprintk (SX_DEBUG_FLOW, "enter %s port %d room: %ld\n", __FUNCTION__, port_No(sx_get_port(bp, "INT")), SERIAL_XMIT_SIZE - sx_get_port(bp, "ITN")->xmit_cnt - 1);
if (!bp || !(bp->flags & SX_BOARD_ACTIVE)) {
-#ifdef SPECIALIX_DEBUG
- printk (KERN_DEBUG "sx: False interrupt. irq %d.\n", irq);
-#endif
+ dprintk (SX_DEBUG_IRQ, "sx: False interrupt. irq %d.\n", irq);
+ spin_unlock_irqrestore(&bp->lock, flags);
+ func_exit();
return IRQ_NONE;
}
else if (ack == (SX_ID | GIVR_IT_REXC))
sx_receive_exc(bp);
else
- printk(KERN_ERR "sx%d: Bad receive ack 0x%02x.\n",
- board_No(bp), ack);
+ printk(KERN_ERR "sx%d: status: 0x%x Bad receive ack 0x%02x.\n",
+ board_No(bp), status, ack);
} else if (status & SRSR_TREQint) {
ack = sx_in(bp, CD186x_TRAR);
if (ack == (SX_ID | GIVR_IT_TX))
sx_transmit(bp);
else
- printk(KERN_ERR "sx%d: Bad transmit ack 0x%02x.\n",
- board_No(bp), ack);
+ printk(KERN_ERR "sx%d: status: 0x%x Bad transmit ack 0x%02x. port: %d\n",
+ board_No(bp), status, ack, port_No (sx_get_port (bp, "Int")));
} else if (status & SRSR_MREQint) {
ack = sx_in(bp, CD186x_MRAR);
if (ack == (SX_ID | GIVR_IT_MODEM))
sx_check_modem(bp);
else
- printk(KERN_ERR "sx%d: Bad modem ack 0x%02x.\n",
- board_No(bp), ack);
+ printk(KERN_ERR "sx%d: status: 0x%x Bad modem ack 0x%02x.\n",
+ board_No(bp), status, ack);
}
}
bp->reg = saved_reg;
outb (bp->reg, bp->base + SX_ADDR_REG);
+ spin_unlock_irqrestore(&bp->lock, flags);
+ func_exit();
return IRQ_HANDLED;
}
* Routines for open & close processing.
*/
-void turn_ints_off (struct specialix_board *bp)
+static void turn_ints_off (struct specialix_board *bp)
{
+ unsigned long flags;
+
+ func_enter();
if (bp->flags & SX_BOARD_IS_PCI) {
/* This was intended for enabeling the interrupt on the
* PCI card. However it seems that it's already enabled
* and as PCI interrupts can be shared, there is no real
* reason to have to turn it off. */
}
+
+ spin_lock_irqsave(&bp->lock, flags);
(void) sx_in_off (bp, 0); /* Turn off interrupts. */
+ spin_unlock_irqrestore(&bp->lock, flags);
+
+ func_exit();
}
-void turn_ints_on (struct specialix_board *bp)
+static void turn_ints_on (struct specialix_board *bp)
{
+ unsigned long flags;
+
+ func_enter();
+
if (bp->flags & SX_BOARD_IS_PCI) {
/* play with the PCI chip. See comment above. */
}
+ spin_lock_irqsave(&bp->lock, flags);
(void) sx_in (bp, 0); /* Turn ON interrupts. */
+ spin_unlock_irqrestore(&bp->lock, flags);
+
+ func_exit();
}
/* Called with disabled interrupts */
static inline void sx_shutdown_board(struct specialix_board *bp)
{
- if (!(bp->flags & SX_BOARD_ACTIVE))
+ func_enter();
+
+ if (!(bp->flags & SX_BOARD_ACTIVE)) {
+ func_exit();
return;
-
+ }
+
bp->flags &= ~SX_BOARD_ACTIVE;
-#if SPECIALIX_DEBUG > 2
- printk ("Freeing IRQ%d for board %d.\n", bp->irq, board_No (bp));
-#endif
+ dprintk (SX_DEBUG_IRQ, "Freeing IRQ%d for board %d.\n",
+ bp->irq, board_No (bp));
free_irq(bp->irq, bp);
turn_ints_off (bp);
+
+ func_exit();
}
unsigned char cor1 = 0, cor3 = 0;
unsigned char mcor1 = 0, mcor2 = 0;
static unsigned long again;
-
- if (!(tty = port->tty) || !tty->termios)
+ unsigned long flags;
+
+ func_enter();
+
+ if (!(tty = port->tty) || !tty->termios) {
+ func_exit();
return;
+ }
port->IER = 0;
port->COR2 = 0;
/* Select port on the board */
+ spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CAR, port_No(port));
/* The Specialix board doens't implement the RTS lines.
port->MSVR = MSVR_DTR | (sx_in(bp, CD186x_MSVR) & MSVR_RTS);
else
port->MSVR = (sx_in(bp, CD186x_MSVR) & MSVR_RTS);
-#ifdef DEBUG_SPECIALIX
- printk (KERN_DEBUG "sx: got MSVR=%02x.\n", port->MSVR);
-#endif
+ spin_unlock_irqrestore(&bp->lock, flags);
+ dprintk (SX_DEBUG_TERMIOS, "sx: got MSVR=%02x.\n", port->MSVR);
baud = C_BAUD(tty);
if (baud & CBAUDEX) {
if (!baud_table[baud]) {
/* Drop DTR & exit */
-#ifdef SPECIALIX_DEBUG
- printk (KERN_DEBUG "Dropping DTR... Hmm....\n");
-#endif
+ dprintk (SX_DEBUG_TERMIOS, "Dropping DTR... Hmm....\n");
if (!SX_CRTSCTS (tty)) {
port -> MSVR &= ~ MSVR_DTR;
+ spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_MSVR, port->MSVR );
+ spin_unlock_irqrestore(&bp->lock, flags);
}
-#ifdef DEBUG_SPECIALIX
else
- printk (KERN_DEBUG "Can't drop DTR: no DTR.\n");
-#endif
+ dprintk (SX_DEBUG_TERMIOS, "Can't drop DTR: no DTR.\n");
return;
} else {
/* Set DTR on */
port_No (port), tmp);
}
}
-
+ spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_RBPRH, (tmp >> 8) & 0xff);
sx_out(bp, CD186x_TBPRH, (tmp >> 8) & 0xff);
sx_out(bp, CD186x_RBPRL, tmp & 0xff);
sx_out(bp, CD186x_TBPRL, tmp & 0xff);
-
+ spin_unlock_irqrestore(&bp->lock, flags);
if (port->custom_divisor) {
baud = (SX_OSCFREQ + port->custom_divisor/2) / port->custom_divisor;
baud = ( baud + 5 ) / 10;
/* Receiver timeout will be transmission time for 1.5 chars */
tmp = (SPECIALIX_TPS + SPECIALIX_TPS/2 + baud/2) / baud;
tmp = (tmp > 0xff) ? 0xff : tmp;
+ spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_RTPR, tmp);
-
+ spin_unlock_irqrestore(&bp->lock, flags);
switch (C_CSIZE(tty)) {
case CS5:
cor1 |= COR1_5BITS;
port->IER |= IER_DSR | IER_CTS;
mcor1 |= MCOR1_DSRZD | MCOR1_CTSZD;
mcor2 |= MCOR2_DSROD | MCOR2_CTSOD;
+ spin_lock_irqsave(&bp->lock, flags);
tty->hw_stopped = !(sx_in(bp, CD186x_MSVR) & (MSVR_CTS|MSVR_DSR));
+ spin_unlock_irqrestore(&bp->lock, flags);
#else
port->COR2 |= COR2_CTSAE;
#endif
cor3 |= (COR3_FCT | COR3_SCDE);
if (I_IXANY(tty))
port->COR2 |= COR2_IXM;
+ spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_SCHR1, START_CHAR(tty));
sx_out(bp, CD186x_SCHR2, STOP_CHAR(tty));
sx_out(bp, CD186x_SCHR3, START_CHAR(tty));
sx_out(bp, CD186x_SCHR4, STOP_CHAR(tty));
+ spin_unlock_irqrestore(&bp->lock, flags);
}
if (!C_CLOCAL(tty)) {
/* Enable CD check */
port->IER |= IER_RXD;
/* Set input FIFO size (1-8 bytes) */
- cor3 |= SPECIALIX_RXFIFO;
+ cor3 |= sx_rxfifo;
/* Setting up CD186x channel registers */
+ spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_COR1, cor1);
sx_out(bp, CD186x_COR2, port->COR2);
sx_out(bp, CD186x_COR3, cor3);
+ spin_unlock_irqrestore(&bp->lock, flags);
/* Make CD186x know about registers change */
sx_wait_CCR(bp);
+ spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CCR, CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3);
/* Setting up modem option registers */
-#ifdef DEBUG_SPECIALIX
- printk ("Mcor1 = %02x, mcor2 = %02x.\n", mcor1, mcor2);
-#endif
+ dprintk (SX_DEBUG_TERMIOS, "Mcor1 = %02x, mcor2 = %02x.\n", mcor1, mcor2);
sx_out(bp, CD186x_MCOR1, mcor1);
sx_out(bp, CD186x_MCOR2, mcor2);
+ spin_unlock_irqrestore(&bp->lock, flags);
/* Enable CD186x transmitter & receiver */
sx_wait_CCR(bp);
+ spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CCR, CCR_TXEN | CCR_RXEN);
/* Enable interrupts */
sx_out(bp, CD186x_IER, port->IER);
/* And finally set the modem lines... */
sx_out(bp, CD186x_MSVR, port->MSVR);
+ spin_unlock_irqrestore(&bp->lock, flags);
+
+ func_exit();
}
static int sx_setup_port(struct specialix_board *bp, struct specialix_port *port)
{
unsigned long flags;
-
- if (port->flags & ASYNC_INITIALIZED)
+
+ func_enter();
+
+ if (port->flags & ASYNC_INITIALIZED) {
+ func_exit();
return 0;
+ }
if (!port->xmit_buf) {
/* We may sleep in get_zeroed_page() */
unsigned long tmp;
- if (!(tmp = get_zeroed_page(GFP_KERNEL)))
+ if (!(tmp = get_zeroed_page(GFP_KERNEL))) {
+ func_exit();
return -ENOMEM;
+ }
if (port->xmit_buf) {
free_page(tmp);
+ func_exit();
return -ERESTARTSYS;
}
port->xmit_buf = (unsigned char *) tmp;
}
- save_flags(flags); cli();
-
+ spin_lock_irqsave(&port->lock, flags);
+
if (port->tty)
clear_bit(TTY_IO_ERROR, &port->tty->flags);
-
- if (port->count == 1)
- bp->count++;
-
+
port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
sx_change_speed(bp, port);
port->flags |= ASYNC_INITIALIZED;
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
- restore_flags(flags);
+ func_exit();
return 0;
}
static void sx_shutdown_port(struct specialix_board *bp, struct specialix_port *port)
{
struct tty_struct *tty;
+ int i;
+ unsigned long flags;
- if (!(port->flags & ASYNC_INITIALIZED))
+ func_enter();
+
+ if (!(port->flags & ASYNC_INITIALIZED)) {
+ func_exit();
return;
+ }
-#ifdef SX_REPORT_OVERRUN
- printk(KERN_INFO "sx%d: port %d: Total %ld overruns were detected.\n",
- board_No(bp), port_No(port), port->overrun);
-#endif
-#ifdef SX_REPORT_FIFO
- {
- int i;
-
- printk(KERN_INFO "sx%d: port %d: FIFO hits [ ",
- board_No(bp), port_No(port));
+ if (sx_debug & SX_DEBUG_FIFO) {
+ dprintk(SX_DEBUG_FIFO, "sx%d: port %d: %ld overruns, FIFO hits [ ",
+ board_No(bp), port_No(port), port->overrun);
for (i = 0; i < 10; i++) {
- printk("%ld ", port->hits[i]);
+ dprintk(SX_DEBUG_FIFO, "%ld ", port->hits[i]);
}
- printk("].\n");
+ dprintk(SX_DEBUG_FIFO, "].\n");
}
-#endif
+
if (port->xmit_buf) {
free_page((unsigned long) port->xmit_buf);
port->xmit_buf = NULL;
}
/* Select port */
+ spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CAR, port_No(port));
if (!(tty = port->tty) || C_HUPCL(tty)) {
/* Drop DTR */
sx_out(bp, CD186x_MSVDTR, 0);
}
-
+ spin_unlock_irqrestore(&bp->lock, flags);
/* Reset port */
sx_wait_CCR(bp);
+ spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CCR, CCR_SOFTRESET);
/* Disable all interrupts from this port */
port->IER = 0;
sx_out(bp, CD186x_IER, port->IER);
-
+ spin_unlock_irqrestore(&bp->lock, flags);
if (tty)
set_bit(TTY_IO_ERROR, &tty->flags);
port->flags &= ~ASYNC_INITIALIZED;
- if (--bp->count < 0) {
- printk(KERN_ERR "sx%d: sx_shutdown_port: bad board count: %d\n",
- board_No(bp), bp->count);
- bp->count = 0;
- }
-
- /*
- * If this is the last opened port on the board
- * shutdown whole board
- */
if (!bp->count)
sx_shutdown_board(bp);
+ func_exit();
}
int retval;
int do_clocal = 0;
int CD;
+ unsigned long flags;
+
+ func_enter();
/*
* If the device is in the middle of being closed, then block
*/
if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
interruptible_sleep_on(&port->close_wait);
- if (port->flags & ASYNC_HUP_NOTIFY)
+ if (port->flags & ASYNC_HUP_NOTIFY) {
+ func_exit();
return -EAGAIN;
- else
+ } else {
+ func_exit();
return -ERESTARTSYS;
+ }
}
/*
if ((filp->f_flags & O_NONBLOCK) ||
(tty->flags & (1 << TTY_IO_ERROR))) {
port->flags |= ASYNC_NORMAL_ACTIVE;
+ func_exit();
return 0;
}
*/
retval = 0;
add_wait_queue(&port->open_wait, &wait);
- cli();
- if (!tty_hung_up_p(filp))
+ spin_lock_irqsave(&port->lock, flags);
+ if (!tty_hung_up_p(filp)) {
port->count--;
- sti();
+ }
+ spin_unlock_irqrestore(&port->lock, flags);
port->blocked_open++;
while (1) {
- cli();
+ spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CAR, port_No(port));
CD = sx_in(bp, CD186x_MSVR) & MSVR_CD;
if (SX_CRTSCTS (tty)) {
/* Activate DTR */
port->MSVR |= MSVR_DTR;
sx_out (bp, CD186x_MSVR, port->MSVR);
- }
- sti();
+ }
+ spin_unlock_irqrestore(&bp->lock, flags);
set_current_state(TASK_INTERRUPTIBLE);
if (tty_hung_up_p(filp) ||
!(port->flags & ASYNC_INITIALIZED)) {
}
schedule();
}
- current->state = TASK_RUNNING;
+
+ set_current_state(TASK_RUNNING);
remove_wait_queue(&port->open_wait, &wait);
- if (!tty_hung_up_p(filp))
+ spin_lock_irqsave(&port->lock, flags);
+ if (!tty_hung_up_p(filp)) {
port->count++;
+ }
port->blocked_open--;
- if (retval)
+ spin_unlock_irqrestore(&port->lock, flags);
+ if (retval) {
+ func_exit();
return retval;
-
+ }
+
port->flags |= ASYNC_NORMAL_ACTIVE;
+ func_exit();
return 0;
}
int error;
struct specialix_port * port;
struct specialix_board * bp;
-
+ int i;
+ unsigned long flags;
+
+ func_enter();
+
board = SX_BOARD(tty->index);
- if (board >= SX_NBOARD || !(sx_board[board].flags & SX_BOARD_PRESENT))
+ if (board >= SX_NBOARD || !(sx_board[board].flags & SX_BOARD_PRESENT)) {
+ func_exit();
return -ENODEV;
+ }
bp = &sx_board[board];
port = sx_port + board * SX_NPORT + SX_PORT(tty->index);
+ port->overrun = 0;
+ for (i = 0; i < 10; i++)
+ port->hits[i]=0;
-#ifdef DEBUG_SPECIALIX
- printk (KERN_DEBUG "Board = %d, bp = %p, port = %p, portno = %d.\n",
+ dprintk (SX_DEBUG_OPEN, "Board = %d, bp = %p, port = %p, portno = %d.\n",
board, bp, port, SX_PORT(tty->index));
-#endif
- if (sx_paranoia_check(port, tty->name, "sx_open"))
+ if (sx_paranoia_check(port, tty->name, "sx_open")) {
+ func_enter();
return -ENODEV;
+ }
- if ((error = sx_setup_board(bp)))
+ if ((error = sx_setup_board(bp))) {
+ func_exit();
return error;
+ }
+ spin_lock_irqsave(&bp->lock, flags);
port->count++;
+ bp->count++;
tty->driver_data = port;
port->tty = tty;
+ spin_unlock_irqrestore(&bp->lock, flags);
- if ((error = sx_setup_port(bp, port)))
+ if ((error = sx_setup_port(bp, port))) {
+ func_enter();
return error;
+ }
- if ((error = block_til_ready(tty, filp, port)))
+ if ((error = block_til_ready(tty, filp, port))) {
+ func_enter();
return error;
+ }
+ func_exit();
return 0;
}
unsigned long flags;
unsigned long timeout;
- if (!port || sx_paranoia_check(port, tty->name, "close"))
+ func_enter();
+ if (!port || sx_paranoia_check(port, tty->name, "close")) {
+ func_exit();
return;
-
- save_flags(flags); cli();
+ }
+ spin_lock_irqsave(&port->lock, flags);
+
if (tty_hung_up_p(filp)) {
- restore_flags(flags);
+ spin_unlock_irqrestore(&port->lock, flags);
+ func_exit();
return;
}
board_No(bp), port->count);
port->count = 1;
}
- if (--port->count < 0) {
- printk(KERN_ERR "sx%d: sx_close: bad port count for tty%d: %d\n",
- board_No(bp), port_No(port), port->count);
- port->count = 0;
- }
- if (port->count) {
- restore_flags(flags);
+
+ if (port->count > 1) {
+ port->count--;
+ bp->count--;
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ func_exit();
return;
}
port->flags |= ASYNC_CLOSING;
* the line discipline to only process XON/XOFF characters.
*/
tty->closing = 1;
- if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
+ spin_unlock_irqrestore(&port->lock, flags);
+ dprintk (SX_DEBUG_OPEN, "Closing\n");
+ if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) {
tty_wait_until_sent(tty, port->closing_wait);
+ }
/*
* At this point we stop accepting input. To do this, we
* disable the receive line status interrupts, and tell the
* interrupt driver to stop checking the data ready bit in the
* line status register.
*/
+ dprintk (SX_DEBUG_OPEN, "Closed\n");
port->IER &= ~IER_RXD;
if (port->flags & ASYNC_INITIALIZED) {
port->IER &= ~IER_TXRDY;
port->IER |= IER_TXEMPTY;
+ spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CAR, port_No(port));
sx_out(bp, CD186x_IER, port->IER);
+ spin_unlock_irqrestore(&bp->lock, flags);
/*
* Before we drop DTR, make sure the UART transmitter
* has completely drained; this is especially
*/
timeout = jiffies+HZ;
while(port->IER & IER_TXEMPTY) {
- current->state = TASK_INTERRUPTIBLE;
- schedule_timeout(port->timeout);
+ set_current_state (TASK_INTERRUPTIBLE);
+ msleep_interruptible(jiffies_to_msecs(port->timeout));
if (time_after(jiffies, timeout)) {
printk (KERN_INFO "Timeout waiting for close\n");
break;
}
}
+
+ if (--bp->count < 0) {
+ printk(KERN_ERR "sx%d: sx_shutdown_port: bad board count: %d port: %d\n",
+ board_No(bp), bp->count, tty->index);
+ bp->count = 0;
+ }
+ if (--port->count < 0) {
+ printk(KERN_ERR "sx%d: sx_close: bad port count for tty%d: %d\n",
+ board_No(bp), port_No(port), port->count);
+ port->count = 0;
+ }
+
sx_shutdown_port(bp, port);
if (tty->driver->flush_buffer)
tty->driver->flush_buffer(tty);
- if (tty->ldisc.flush_buffer)
- tty->ldisc.flush_buffer(tty);
+ tty_ldisc_flush(tty);
+ spin_lock_irqsave(&port->lock, flags);
tty->closing = 0;
port->event = 0;
- port->tty = 0;
+ port->tty = NULL;
+ spin_unlock_irqrestore(&port->lock, flags);
if (port->blocked_open) {
if (port->close_delay) {
- current->state = TASK_INTERRUPTIBLE;
- schedule_timeout(port->close_delay);
+ msleep_interruptible(jiffies_to_msecs(port->close_delay));
}
wake_up_interruptible(&port->open_wait);
}
port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
wake_up_interruptible(&port->close_wait);
- restore_flags(flags);
+
+ func_exit();
}
-static int sx_write(struct tty_struct * tty, int from_user,
+static int sx_write(struct tty_struct * tty,
const unsigned char *buf, int count)
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
struct specialix_board *bp;
int c, total = 0;
unsigned long flags;
-
- if (sx_paranoia_check(port, tty->name, "sx_write"))
+
+ func_enter();
+ if (sx_paranoia_check(port, tty->name, "sx_write")) {
+ func_exit();
return 0;
+ }
bp = port_Board(port);
- if (!tty || !port->xmit_buf || !tmp_buf)
+ if (!tty || !port->xmit_buf || !tmp_buf) {
+ func_exit();
return 0;
+ }
- save_flags(flags);
- if (from_user) {
- down(&tmp_buf_sem);
- while (1) {
- c = MIN(count, MIN(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
- SERIAL_XMIT_SIZE - port->xmit_head));
- if (c <= 0)
- break;
-
- c -= copy_from_user(tmp_buf, buf, c);
- if (!c) {
- if (!total)
- total = -EFAULT;
- break;
- }
-
- cli();
- c = MIN(c, MIN(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
- SERIAL_XMIT_SIZE - port->xmit_head));
- memcpy(port->xmit_buf + port->xmit_head, tmp_buf, c);
- port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
- port->xmit_cnt += c;
- restore_flags(flags);
-
- buf += c;
- count -= c;
- total += c;
- }
- up(&tmp_buf_sem);
- } else {
- while (1) {
- cli();
- c = MIN(count, MIN(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
- SERIAL_XMIT_SIZE - port->xmit_head));
- if (c <= 0) {
- restore_flags(flags);
- break;
- }
- memcpy(port->xmit_buf + port->xmit_head, buf, c);
- port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
- port->xmit_cnt += c;
- restore_flags(flags);
-
- buf += c;
- count -= c;
- total += c;
+ while (1) {
+ spin_lock_irqsave(&port->lock, flags);
+ c = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
+ SERIAL_XMIT_SIZE - port->xmit_head));
+ if (c <= 0) {
+ spin_unlock_irqrestore(&port->lock, flags);
+ break;
}
+ memcpy(port->xmit_buf + port->xmit_head, buf, c);
+ port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
+ port->xmit_cnt += c;
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ buf += c;
+ count -= c;
+ total += c;
}
- cli();
+ spin_lock_irqsave(&bp->lock, flags);
if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped &&
!(port->IER & IER_TXRDY)) {
port->IER |= IER_TXRDY;
sx_out(bp, CD186x_CAR, port_No(port));
sx_out(bp, CD186x_IER, port->IER);
}
- restore_flags(flags);
+ spin_unlock_irqrestore(&bp->lock, flags);
+ func_exit();
+
return total;
}
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
unsigned long flags;
+ struct specialix_board * bp;
- if (sx_paranoia_check(port, tty->name, "sx_put_char"))
- return;
+ func_enter();
- if (!tty || !port->xmit_buf)
+ if (sx_paranoia_check(port, tty->name, "sx_put_char")) {
+ func_exit();
return;
-
- save_flags(flags); cli();
-
- if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) {
- restore_flags(flags);
+ }
+ dprintk (SX_DEBUG_TX, "check tty: %p %p\n", tty, port->xmit_buf);
+ if (!tty || !port->xmit_buf) {
+ func_exit();
return;
}
+ bp = port_Board(port);
+ spin_lock_irqsave(&port->lock, flags);
+ dprintk (SX_DEBUG_TX, "xmit_cnt: %d xmit_buf: %p\n", port->xmit_cnt, port->xmit_buf);
+ if ((port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) || (!port->xmit_buf)) {
+ spin_unlock_irqrestore(&port->lock, flags);
+ dprintk (SX_DEBUG_TX, "Exit size\n");
+ func_exit();
+ return;
+ }
+ dprintk (SX_DEBUG_TX, "Handle xmit: %p %p\n", port, port->xmit_buf);
port->xmit_buf[port->xmit_head++] = ch;
port->xmit_head &= SERIAL_XMIT_SIZE - 1;
port->xmit_cnt++;
- restore_flags(flags);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ func_exit();
}
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
unsigned long flags;
-
- if (sx_paranoia_check(port, tty->name, "sx_flush_chars"))
+ struct specialix_board * bp = port_Board(port);
+
+ func_enter();
+
+ if (sx_paranoia_check(port, tty->name, "sx_flush_chars")) {
+ func_exit();
return;
-
+ }
if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
- !port->xmit_buf)
+ !port->xmit_buf) {
+ func_exit();
return;
-
- save_flags(flags); cli();
+ }
+ spin_lock_irqsave(&bp->lock, flags);
port->IER |= IER_TXRDY;
sx_out(port_Board(port), CD186x_CAR, port_No(port));
sx_out(port_Board(port), CD186x_IER, port->IER);
- restore_flags(flags);
+ spin_unlock_irqrestore(&bp->lock, flags);
+
+ func_exit();
}
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
int ret;
-
- if (sx_paranoia_check(port, tty->name, "sx_write_room"))
+
+ func_enter();
+
+ if (sx_paranoia_check(port, tty->name, "sx_write_room")) {
+ func_exit();
return 0;
+ }
ret = SERIAL_XMIT_SIZE - port->xmit_cnt - 1;
if (ret < 0)
ret = 0;
+
+ func_exit();
return ret;
}
static int sx_chars_in_buffer(struct tty_struct *tty)
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
-
- if (sx_paranoia_check(port, tty->name, "sx_chars_in_buffer"))
- return 0;
+
+ func_enter();
+ if (sx_paranoia_check(port, tty->name, "sx_chars_in_buffer")) {
+ func_exit();
+ return 0;
+ }
+ func_exit();
return port->xmit_cnt;
}
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
unsigned long flags;
-
- if (sx_paranoia_check(port, tty->name, "sx_flush_buffer"))
+ struct specialix_board * bp;
+
+ func_enter();
+
+ if (sx_paranoia_check(port, tty->name, "sx_flush_buffer")) {
+ func_exit();
return;
+ }
- save_flags(flags); cli();
+ bp = port_Board(port);
+ spin_lock_irqsave(&port->lock, flags);
port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
- restore_flags(flags);
-
- wake_up_interruptible(&tty->write_wait);
- if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
- tty->ldisc.write_wakeup)
- (tty->ldisc.write_wakeup)(tty);
+ spin_unlock_irqrestore(&port->lock, flags);
+ tty_wakeup(tty);
+
+ func_exit();
}
unsigned int result;
unsigned long flags;
- if (sx_paranoia_check(port, tty->name, __FUNCTION__))
+ func_enter();
+
+ if (sx_paranoia_check(port, tty->name, __FUNCTION__)) {
+ func_exit();
return -ENODEV;
+ }
bp = port_Board(port);
- save_flags(flags); cli();
+ spin_lock_irqsave (&bp->lock, flags);
sx_out(bp, CD186x_CAR, port_No(port));
status = sx_in(bp, CD186x_MSVR);
- restore_flags(flags);
-#ifdef DEBUG_SPECIALIX
- printk (KERN_DEBUG "Got msvr[%d] = %02x, car = %d.\n",
+ spin_unlock_irqrestore(&bp->lock, flags);
+ dprintk (SX_DEBUG_INIT, "Got msvr[%d] = %02x, car = %d.\n",
port_No(port), status, sx_in (bp, CD186x_CAR));
- printk (KERN_DEBUG "sx_port = %p, port = %p\n", sx_port, port);
-#endif
+ dprintk (SX_DEBUG_INIT, "sx_port = %p, port = %p\n", sx_port, port);
if (SX_CRTSCTS(port->tty)) {
result = /* (status & MSVR_RTS) ? */ TIOCM_DTR /* : 0) */
| ((status & MSVR_DTR) ? TIOCM_RTS : 0)
| ((status & MSVR_CTS) ? TIOCM_CTS : 0);
}
+ func_exit();
+
return result;
}
unsigned long flags;
struct specialix_board *bp;
- if (sx_paranoia_check(port, tty->name, __FUNCTION__))
+ func_enter();
+
+ if (sx_paranoia_check(port, tty->name, __FUNCTION__)) {
+ func_exit();
return -ENODEV;
+ }
bp = port_Board(port);
- save_flags(flags); cli();
+ spin_lock_irqsave(&port->lock, flags);
/* if (set & TIOCM_RTS)
port->MSVR |= MSVR_RTS; */
/* if (set & TIOCM_DTR)
if (clear & TIOCM_DTR)
port->MSVR &= ~MSVR_DTR;
}
-
+ spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CAR, port_No(port));
sx_out(bp, CD186x_MSVR, port->MSVR);
- restore_flags(flags);
+ spin_unlock_irqrestore(&bp->lock, flags);
+ spin_unlock_irqrestore(&port->lock, flags);
+ func_exit();
return 0;
}
struct specialix_board *bp = port_Board(port);
unsigned long flags;
- save_flags(flags); cli();
+ func_enter();
+
+ spin_lock_irqsave (&port->lock, flags);
port->break_length = SPECIALIX_TPS / HZ * length;
port->COR2 |= COR2_ETC;
port->IER |= IER_TXRDY;
+ spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CAR, port_No(port));
sx_out(bp, CD186x_COR2, port->COR2);
sx_out(bp, CD186x_IER, port->IER);
+ spin_unlock_irqrestore(&bp->lock, flags);
+ spin_unlock_irqrestore (&port->lock, flags);
sx_wait_CCR(bp);
+ spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CCR, CCR_CORCHG2);
+ spin_unlock_irqrestore(&bp->lock, flags);
sx_wait_CCR(bp);
- restore_flags(flags);
+
+ func_exit();
}
static inline int sx_set_serial_info(struct specialix_port * port,
- struct serial_struct * newinfo)
+ struct serial_struct __user * newinfo)
{
struct serial_struct tmp;
struct specialix_board *bp = port_Board(port);
int change_speed;
- unsigned long flags;
- int error;
-
- error = verify_area(VERIFY_READ, (void *) newinfo, sizeof(tmp));
- if (error)
- return error;
- if (copy_from_user(&tmp, newinfo, sizeof(tmp)))
+ func_enter();
+ /*
+ if (!access_ok(VERIFY_READ, (void *) newinfo, sizeof(tmp))) {
+ func_exit();
return -EFAULT;
+ }
+ */
+ if (copy_from_user(&tmp, newinfo, sizeof(tmp))) {
+ func_enter();
+ return -EFAULT;
+ }
#if 0
if ((tmp.irq != bp->irq) ||
(tmp.baud_base != (SX_OSCFREQ + CD186x_TPC/2) / CD186x_TPC) ||
(tmp.custom_divisor != 0) ||
(tmp.xmit_fifo_size != CD186x_NFIFO) ||
- (tmp.flags & ~SPECIALIX_LEGAL_FLAGS))
+ (tmp.flags & ~SPECIALIX_LEGAL_FLAGS)) {
+ func_exit();
return -EINVAL;
+ }
#endif
change_speed = ((port->flags & ASYNC_SPD_MASK) !=
if ((tmp.close_delay != port->close_delay) ||
(tmp.closing_wait != port->closing_wait) ||
((tmp.flags & ~ASYNC_USR_MASK) !=
- (port->flags & ~ASYNC_USR_MASK)))
+ (port->flags & ~ASYNC_USR_MASK))) {
+ func_exit();
return -EPERM;
+ }
port->flags = ((port->flags & ~ASYNC_USR_MASK) |
(tmp.flags & ASYNC_USR_MASK));
port->custom_divisor = tmp.custom_divisor;
port->custom_divisor = tmp.custom_divisor;
}
if (change_speed) {
- save_flags(flags); cli();
sx_change_speed(bp, port);
- restore_flags(flags);
}
+ func_exit();
return 0;
}
static inline int sx_get_serial_info(struct specialix_port * port,
- struct serial_struct * retinfo)
+ struct serial_struct __user *retinfo)
{
struct serial_struct tmp;
struct specialix_board *bp = port_Board(port);
- int error;
- error = verify_area(VERIFY_WRITE, (void *) retinfo, sizeof(tmp));
- if (error)
- return error;
+ func_enter();
+
+ /*
+ if (!access_ok(VERIFY_WRITE, (void *) retinfo, sizeof(tmp)))
+ return -EFAULT;
+ */
memset(&tmp, 0, sizeof(tmp));
tmp.type = PORT_CIRRUS;
tmp.closing_wait = port->closing_wait * HZ/100;
tmp.custom_divisor = port->custom_divisor;
tmp.xmit_fifo_size = CD186x_NFIFO;
- if (copy_to_user(retinfo, &tmp, sizeof(tmp)))
+ if (copy_to_user(retinfo, &tmp, sizeof(tmp))) {
+ func_exit();
return -EFAULT;
+ }
+
+ func_exit();
return 0;
}
unsigned int cmd, unsigned long arg)
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
- int error;
int retval;
-
- if (sx_paranoia_check(port, tty->name, "sx_ioctl"))
+ void __user *argp = (void __user *)arg;
+
+ func_enter();
+
+ if (sx_paranoia_check(port, tty->name, "sx_ioctl")) {
+ func_exit();
return -ENODEV;
+ }
switch (cmd) {
case TCSBRK: /* SVID version: non-zero arg --> no break */
retval = tty_check_change(tty);
- if (retval)
+ if (retval) {
+ func_exit();
return retval;
+ }
tty_wait_until_sent(tty, 0);
if (!arg)
sx_send_break(port, HZ/4); /* 1/4 second */
return 0;
case TCSBRKP: /* support for POSIX tcsendbreak() */
retval = tty_check_change(tty);
- if (retval)
+ if (retval) {
+ func_exit();
return retval;
+ }
tty_wait_until_sent(tty, 0);
sx_send_break(port, arg ? arg*(HZ/10) : HZ/4);
+ func_exit();
return 0;
case TIOCGSOFTCAR:
- error = verify_area(VERIFY_WRITE, (void *) arg, sizeof(long));
- if (error)
- return error;
- put_user(C_CLOCAL(tty) ? 1 : 0,
- (unsigned long *) arg);
+ if (put_user(C_CLOCAL(tty)?1:0, (unsigned long __user *)argp)) {
+ func_exit();
+ return -EFAULT;
+ }
+ func_exit();
return 0;
case TIOCSSOFTCAR:
- get_user(arg, (unsigned long *) arg);
+ if (get_user(arg, (unsigned long __user *) argp)) {
+ func_exit();
+ return -EFAULT;
+ }
tty->termios->c_cflag =
((tty->termios->c_cflag & ~CLOCAL) |
(arg ? CLOCAL : 0));
+ func_exit();
return 0;
- case TIOCGSERIAL:
- return sx_get_serial_info(port, (struct serial_struct *) arg);
+ case TIOCGSERIAL:
+ func_exit();
+ return sx_get_serial_info(port, argp);
case TIOCSSERIAL:
- return sx_set_serial_info(port, (struct serial_struct *) arg);
+ func_exit();
+ return sx_set_serial_info(port, argp);
default:
+ func_exit();
return -ENOIOCTLCMD;
}
+ func_exit();
return 0;
}
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
struct specialix_board *bp;
unsigned long flags;
-
- if (sx_paranoia_check(port, tty->name, "sx_throttle"))
+
+ func_enter();
+
+ if (sx_paranoia_check(port, tty->name, "sx_throttle")) {
+ func_exit();
return;
+ }
bp = port_Board(port);
- save_flags(flags); cli();
-
/* Use DTR instead of RTS ! */
if (SX_CRTSCTS (tty))
port->MSVR &= ~MSVR_DTR;
printk (KERN_ERR "sx%d: Need to throttle, but can't (hardware hs is off)\n",
port_No (port));
}
+ spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CAR, port_No(port));
+ spin_unlock_irqrestore(&bp->lock, flags);
if (I_IXOFF(tty)) {
+ spin_unlock_irqrestore(&bp->lock, flags);
sx_wait_CCR(bp);
+ spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CCR, CCR_SSCH2);
+ spin_unlock_irqrestore(&bp->lock, flags);
sx_wait_CCR(bp);
}
+ spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_MSVR, port->MSVR);
- restore_flags(flags);
+ spin_unlock_irqrestore(&bp->lock, flags);
+
+ func_exit();
}
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
struct specialix_board *bp;
unsigned long flags;
+
+ func_enter();
- if (sx_paranoia_check(port, tty->name, "sx_unthrottle"))
+ if (sx_paranoia_check(port, tty->name, "sx_unthrottle")) {
+ func_exit();
return;
+ }
bp = port_Board(port);
- save_flags(flags); cli();
+ spin_lock_irqsave(&port->lock, flags);
/* XXXX Use DTR INSTEAD???? */
if (SX_CRTSCTS(tty)) {
port->MSVR |= MSVR_DTR;
} /* Else clause: see remark in "sx_throttle"... */
-
+ spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CAR, port_No(port));
+ spin_unlock_irqrestore(&bp->lock, flags);
if (I_IXOFF(tty)) {
+ spin_unlock_irqrestore(&port->lock, flags);
sx_wait_CCR(bp);
+ spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CCR, CCR_SSCH1);
+ spin_unlock_irqrestore(&bp->lock, flags);
sx_wait_CCR(bp);
+ spin_lock_irqsave(&port->lock, flags);
}
+ spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_MSVR, port->MSVR);
- restore_flags(flags);
+ spin_unlock_irqrestore(&bp->lock, flags);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ func_exit();
}
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
struct specialix_board *bp;
unsigned long flags;
-
- if (sx_paranoia_check(port, tty->name, "sx_stop"))
- return;
+
+ func_enter();
+ if (sx_paranoia_check(port, tty->name, "sx_stop")) {
+ func_exit();
+ return;
+ }
+
bp = port_Board(port);
- save_flags(flags); cli();
+ spin_lock_irqsave(&port->lock, flags);
port->IER &= ~IER_TXRDY;
+ spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CAR, port_No(port));
sx_out(bp, CD186x_IER, port->IER);
- restore_flags(flags);
+ spin_unlock_irqrestore(&bp->lock, flags);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ func_exit();
}
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
struct specialix_board *bp;
unsigned long flags;
+
+ func_enter();
- if (sx_paranoia_check(port, tty->name, "sx_start"))
+ if (sx_paranoia_check(port, tty->name, "sx_start")) {
+ func_exit();
return;
+ }
bp = port_Board(port);
- save_flags(flags); cli();
+ spin_lock_irqsave(&port->lock, flags);
if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) {
port->IER |= IER_TXRDY;
+ spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CAR, port_No(port));
sx_out(bp, CD186x_IER, port->IER);
+ spin_unlock_irqrestore(&bp->lock, flags);
}
- restore_flags(flags);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ func_exit();
}
struct specialix_port *port = (struct specialix_port *) private_;
struct tty_struct *tty;
+ func_enter();
+
tty = port->tty;
if (tty)
tty_hangup(tty); /* FIXME: module removal race here */
+
+ func_exit();
}
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
struct specialix_board *bp;
-
- if (sx_paranoia_check(port, tty->name, "sx_hangup"))
+ unsigned long flags;
+
+ func_enter();
+
+ if (sx_paranoia_check(port, tty->name, "sx_hangup")) {
+ func_exit();
return;
+ }
bp = port_Board(port);
sx_shutdown_port(bp, port);
+ spin_lock_irqsave(&port->lock, flags);
port->event = 0;
+ bp->count -= port->count;
+ if (bp->count < 0) {
+ printk(KERN_ERR "sx%d: sx_hangup: bad board count: %d port: %d\n",
+ board_No(bp), bp->count, tty->index);
+ bp->count = 0;
+ }
port->count = 0;
port->flags &= ~ASYNC_NORMAL_ACTIVE;
- port->tty = 0;
+ port->tty = NULL;
+ spin_unlock_irqrestore(&port->lock, flags);
wake_up_interruptible(&port->open_wait);
+
+ func_exit();
}
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
unsigned long flags;
+ struct specialix_board * bp;
if (sx_paranoia_check(port, tty->name, "sx_set_termios"))
return;
tty->termios->c_iflag == old_termios->c_iflag)
return;
- save_flags(flags); cli();
+ bp = port_Board(port);
+ spin_lock_irqsave(&port->lock, flags);
sx_change_speed(port_Board(port), port);
- restore_flags(flags);
+ spin_unlock_irqrestore(&port->lock, flags);
if ((old_termios->c_cflag & CRTSCTS) &&
!(tty->termios->c_cflag & CRTSCTS)) {
{
struct specialix_port *port = (struct specialix_port *) private_;
struct tty_struct *tty;
-
- if(!(tty = port->tty))
+
+ func_enter();
+
+ if(!(tty = port->tty)) {
+ func_exit();
return;
+ }
if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &port->event)) {
- if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
- tty->ldisc.write_wakeup)
- (tty->ldisc.write_wakeup)(tty);
- wake_up_interruptible(&tty->write_wait);
+ tty_wakeup(tty);
+ //wake_up_interruptible(&tty->write_wait);
}
+
+ func_exit();
}
static struct tty_operations sx_ops = {
int error;
int i;
+ func_enter();
+
specialix_driver = alloc_tty_driver(SX_NBOARD * SX_NPORT);
if (!specialix_driver) {
printk(KERN_ERR "sx: Couldn't allocate tty_driver.\n");
+ func_exit();
return 1;
}
if (!(tmp_buf = (unsigned char *) get_zeroed_page(GFP_KERNEL))) {
printk(KERN_ERR "sx: Couldn't get free page.\n");
put_tty_driver(specialix_driver);
+ func_exit();
return 1;
}
specialix_driver->owner = THIS_MODULE;
free_page((unsigned long)tmp_buf);
printk(KERN_ERR "sx: Couldn't register specialix IO8+ driver, error = %d\n",
error);
+ func_exit();
return 1;
}
memset(sx_port, 0, sizeof(sx_port));
sx_port[i].closing_wait = 3000 * HZ/100;
init_waitqueue_head(&sx_port[i].open_wait);
init_waitqueue_head(&sx_port[i].close_wait);
+ spin_lock_init(&sx_port[i].lock);
}
+ func_exit();
return 0;
}
-
static void sx_release_drivers(void)
{
+ func_enter();
+
free_page((unsigned long)tmp_buf);
tty_unregister_driver(specialix_driver);
put_tty_driver(specialix_driver);
+ func_exit();
}
-
-#ifndef MODULE
-/*
- * Called at boot time.
- *
- * You can specify IO base for up to SX_NBOARD cards,
- * using line "specialix=0xiobase1,0xiobase2,.." at LILO prompt.
- * Note that there will be no probing at default
- * addresses in this case.
- *
- */
-void specialix_setup(char *str, int * ints)
-{
- int i;
-
- for (i=0;i<SX_NBOARD;i++) {
- sx_board[i].base = 0;
- }
-
- for (i = 1; i <= ints[0]; i++) {
- if (i&1)
- sx_board[i/2].base = ints[i];
- else
- sx_board[i/2 -1].irq = ints[i];
- }
-}
-#endif
-
/*
* This routine must be called by kernel at boot time
*/
int i;
int found = 0;
+ func_enter();
+
printk(KERN_INFO "sx: Specialix IO8+ driver v" VERSION ", (c) R.E.Wolff 1997/1998.\n");
printk(KERN_INFO "sx: derived from work (c) D.Gorodchanin 1994-1996.\n");
#ifdef CONFIG_SPECIALIX_RTSCTS
printk (KERN_INFO "sx: DTR/RTS pin is RTS when CRTSCTS is on.\n");
#endif
- if (sx_init_drivers())
+ for (i = 0; i < SX_NBOARD; i++)
+ sx_board[i].lock = SPIN_LOCK_UNLOCKED;
+
+ if (sx_init_drivers()) {
+ func_exit();
return -EIO;
+ }
for (i = 0; i < SX_NBOARD; i++)
if (sx_board[i].base && !sx_probe(&sx_board[i]))
if (!found) {
sx_release_drivers();
printk(KERN_INFO "sx: No specialix IO8+ boards detected.\n");
+ func_exit();
return -EIO;
}
+ func_exit();
return 0;
}
-int iobase[SX_NBOARD] = {0,};
+static int iobase[SX_NBOARD] = {0,};
-int irq [SX_NBOARD] = {0,};
+static int irq [SX_NBOARD] = {0,};
-MODULE_PARM(iobase,"1-" __MODULE_STRING(SX_NBOARD) "i");
-MODULE_PARM(irq,"1-" __MODULE_STRING(SX_NBOARD) "i");
+module_param_array(iobase, int, NULL, 0);
+module_param_array(irq, int, NULL, 0);
+module_param(sx_debug, int, 0);
+module_param(sx_rxfifo, int, 0);
+#ifdef SPECIALIX_TIMER
+module_param(sx_poll, int, 0);
+#endif
/*
* You can setup up to 4 boards.
{
int i;
+ func_enter();
+
+ init_MUTEX(&tmp_buf_sem); /* Init de the semaphore - pvdl */
+
if (iobase[0] || iobase[1] || iobase[2] || iobase[3]) {
for(i = 0; i < SX_NBOARD; i++) {
sx_board[i].base = iobase[i];
sx_board[i].irq = irq[i];
+ sx_board[i].count= 0;
}
}
+ func_exit();
+
return specialix_init();
}
{
int i;
+ func_enter();
+
sx_release_drivers();
for (i = 0; i < SX_NBOARD; i++)
if (sx_board[i].flags & SX_BOARD_PRESENT)
#ifdef SPECIALIX_TIMER
del_timer (&missed_irq_timer);
#endif
-
+
+ func_exit();
}
module_init(specialix_init_module);