/*
- * $Id: synclinkmp.c,v 4.29 2004/08/27 20:06:41 paulkf Exp $
+ * $Id: synclinkmp.c,v 4.38 2005/07/15 13:29:44 paulkf Exp $
*
* Device driver for Microgate SyncLink Multiport
* high speed multiprotocol serial adapter.
#define MAX_DEVICES 12
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/netdevice.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
-#include <asm/serial.h>
#include <linux/delay.h>
#include <linux/ioctl.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/dma.h>
-#include <asm/bitops.h>
+#include <linux/bitops.h>
#include <asm/types.h>
#include <linux/termios.h>
#include <linux/workqueue.h>
#include <linux/hdlc.h>
-#ifdef CONFIG_HDLC_MODULE
-#define CONFIG_HDLC 1
+#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINKMP_MODULE))
+#define SYNCLINK_GENERIC_HDLC 1
+#else
+#define SYNCLINK_GENERIC_HDLC 0
#endif
#define GET_USER(error,value,addr) error = get_user(value,addr)
int dosyncppp;
spinlock_t netlock;
-#ifdef CONFIG_HDLC
+#if SYNCLINK_GENERIC_HDLC
struct net_device *netdev;
#endif
static int maxframe[MAX_DEVICES] = {0,};
static int dosyncppp[MAX_DEVICES] = {0,};
-MODULE_PARM(break_on_load,"i");
-MODULE_PARM(ttymajor,"i");
-MODULE_PARM(debug_level,"i");
-MODULE_PARM(maxframe,"1-" __MODULE_STRING(MAX_DEVICES) "i");
-MODULE_PARM(dosyncppp,"1-" __MODULE_STRING(MAX_DEVICES) "i");
+module_param(break_on_load, bool, 0);
+module_param(ttymajor, int, 0);
+module_param(debug_level, int, 0);
+module_param_array(maxframe, int, NULL, 0);
+module_param_array(dosyncppp, int, NULL, 0);
static char *driver_name = "SyncLink MultiPort driver";
-static char *driver_version = "$Revision: 4.29 $";
+static char *driver_version = "$Revision: 4.38 $";
static int synclinkmp_init_one(struct pci_dev *dev,const struct pci_device_id *ent);
static void synclinkmp_remove_one(struct pci_dev *dev);
static int open(struct tty_struct *tty, struct file * filp);
static void close(struct tty_struct *tty, struct file * filp);
static void hangup(struct tty_struct *tty);
-static void set_termios(struct tty_struct *tty, struct termios *old_termios);
+static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
-static int write(struct tty_struct *tty, int from_user, const unsigned char *buf, int count);
+static int write(struct tty_struct *tty, const unsigned char *buf, int count);
static void put_char(struct tty_struct *tty, unsigned char ch);
static void send_xchar(struct tty_struct *tty, char ch);
static void wait_until_sent(struct tty_struct *tty, int timeout);
static void unthrottle(struct tty_struct * tty);
static void set_break(struct tty_struct *tty, int break_state);
-#ifdef CONFIG_HDLC
+#if SYNCLINK_GENERIC_HDLC
#define dev_to_port(D) (dev_to_hdlc(D)->priv)
static void hdlcdev_tx_done(SLMP_INFO *info);
static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size);
static int tx_enable(SLMP_INFO *info, int enable);
static int tx_abort(SLMP_INFO *info);
static int rx_enable(SLMP_INFO *info, int enable);
-static int map_status(int signals);
static int modem_input_wait(SLMP_INFO *info,int arg);
static int wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr);
static int tiocmget(struct tty_struct *tty, struct file *file);
static void set_rate(SLMP_INFO *info, u32 data_rate);
static int bh_action(SLMP_INFO *info);
-static void bh_handler(void* Context);
+static void bh_handler(struct work_struct *work);
static void bh_receive(SLMP_INFO *info);
static void bh_transmit(SLMP_INFO *info);
static void bh_status(SLMP_INFO *info);
static unsigned char tx_negate_fifo_level = 32; // tx request FIFO negation level in bytes
static u32 misc_ctrl_value = 0x007e4040;
-static u32 lcr1_brdr_value = 0x00800029;
+static u32 lcr1_brdr_value = 0x00800028;
static u32 read_ahead_count = 8;
if (info->blocked_open) {
if (info->close_delay) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(info->close_delay);
+ msleep_interruptible(jiffies_to_msecs(info->close_delay));
}
wake_up_interruptible(&info->open_wait);
}
/* Set new termios settings
*/
-static void set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
unsigned long flags;
* Arguments:
*
* tty pointer to tty information structure
- * from_user flag: 1 = from user process
* buf pointer to buffer containing send data
* count size of send data in bytes
*
* Return Value: number of characters written
*/
-static int write(struct tty_struct *tty, int from_user,
+static int write(struct tty_struct *tty,
const unsigned char *buf, int count)
{
- int c, ret = 0, err;
+ int c, ret = 0;
SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
unsigned long flags;
if (sanity_check(info, tty->name, "write"))
goto cleanup;
- if (!tty || !info->tx_buf)
+ if (!info->tx_buf)
goto cleanup;
if (info->params.mode == MGSL_MODE_HDLC) {
tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
goto start;
}
- if (!from_user) {
- ret = info->tx_count = count;
- tx_load_dma_buffer(info, buf, count);
- goto start;
- }
+ ret = info->tx_count = count;
+ tx_load_dma_buffer(info, buf, count);
+ goto start;
}
for (;;) {
if (c <= 0)
break;
- if (from_user) {
- COPY_FROM_USER(err, info->tx_buf + info->tx_put, buf, c);
- if (err) {
- if (!ret)
- ret = -EFAULT;
- break;
- }
- } else
- memcpy(info->tx_buf + info->tx_put, buf, c);
+ memcpy(info->tx_buf + info->tx_put, buf, c);
spin_lock_irqsave(&info->lock,flags);
info->tx_put += c;
if (sanity_check(info, tty->name, "put_char"))
return;
- if (!tty || !info->tx_buf)
+ if (!info->tx_buf)
return;
spin_lock_irqsave(&info->lock,flags);
if ( info->params.mode == MGSL_MODE_HDLC ) {
while (info->tx_active) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(char_time);
+ msleep_interruptible(jiffies_to_msecs(char_time));
if (signal_pending(current))
break;
if (timeout && time_after(jiffies, orig_jiffies + timeout))
//TODO: determine if there is something similar to USC16C32
// TXSTATUS_ALL_SENT status
while ( info->tx_active && info->tx_enabled) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(char_time);
+ msleep_interruptible(jiffies_to_msecs(char_time));
if (signal_pending(current))
break;
if (timeout && time_after(jiffies, orig_jiffies + timeout))
spin_unlock_irqrestore(&info->lock,flags);
}
-#ifdef CONFIG_HDLC
+#if SYNCLINK_GENERIC_HDLC
/**
* called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
}
info->params.encoding = new_encoding;
- info->params.crc_type = new_crctype;;
+ info->params.crc_type = new_crctype;
/* if network interface up, reprogram hardware */
if (info->netcount)
spin_lock_irqsave(&info->lock, flags);
get_signals(info);
spin_unlock_irqrestore(&info->lock, flags);
- hdlc_set_carrier(info->serial_signals & SerialSignal_DCD, dev);
-
+ if (info->serial_signals & SerialSignal_DCD)
+ netif_carrier_on(dev);
+ else
+ netif_carrier_off(dev);
return 0;
}
memcpy(skb_put(skb, size),buf,size);
- skb->dev = info->netdev;
- skb->mac.raw = skb->data;
- skb->protocol = hdlc_type_trans(skb, skb->dev);
+ skb->protocol = hdlc_type_trans(skb, info->netdev);
stats->rx_packets++;
stats->rx_bytes += size;
/* Perform bottom half processing of work items queued by ISR.
*/
-void bh_handler(void* Context)
+void bh_handler(struct work_struct *work)
{
- SLMP_INFO *info = (SLMP_INFO*)Context;
+ SLMP_INFO *info = container_of(work, SLMP_INFO, task);
int action;
if (!info)
if ( tty ) {
if (!(status & info->ignore_status_mask1)) {
if (info->read_status_mask1 & BRKD) {
- *tty->flip.flag_buf_ptr = TTY_BREAK;
+ tty_insert_flip_char(tty, 0, TTY_BREAK);
if (info->flags & ASYNC_SAK)
do_SAK(tty);
}
while((status = read_reg(info,CST0)) & BIT0)
{
+ int flag = 0;
+ int over = 0;
DataByte = read_reg(info,TRB);
- if ( tty ) {
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- continue;
-
- *tty->flip.char_buf_ptr = DataByte;
- *tty->flip.flag_buf_ptr = 0;
- }
-
icount->rx++;
if ( status & (PE + FRME + OVRN) ) {
if ( tty ) {
if (status & PE)
- *tty->flip.flag_buf_ptr = TTY_PARITY;
+ flag = TTY_PARITY;
else if (status & FRME)
- *tty->flip.flag_buf_ptr = TTY_FRAME;
+ flag = TTY_FRAME;
if (status & OVRN) {
/* Overrun is special, since it's
* reported immediately, and doesn't
* affect the current character
*/
- if (tty->flip.count < TTY_FLIPBUF_SIZE) {
- tty->flip.count++;
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- *tty->flip.flag_buf_ptr = TTY_OVERRUN;
- }
+ over = 1;
}
}
} /* end of if (error) */
if ( tty ) {
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
+ tty_insert_flip_char(tty, DataByte, flag);
+ if (over)
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
}
}
if ( debug_level >= DEBUG_LEVEL_ISR ) {
- printk("%s(%d):%s isr_rxrdy() flip count=%d\n",
- __FILE__,__LINE__,info->device_name,
- tty ? tty->flip.count : 0);
printk("%s(%d):%s rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
__FILE__,__LINE__,info->device_name,
icount->rx,icount->brk,icount->parity,
icount->frame,icount->overrun);
}
- if ( tty && tty->flip.count )
+ if ( tty )
tty_flip_buffer_push(tty);
}
-void isr_txeom(SLMP_INFO * info, unsigned char status)
+static void isr_txeom(SLMP_INFO * info, unsigned char status)
{
if ( debug_level >= DEBUG_LEVEL_ISR )
printk("%s(%d):%s isr_txeom status=%02x\n",
set_signals(info);
}
-#ifdef CONFIG_HDLC
+#if SYNCLINK_GENERIC_HDLC
if (info->netcount)
hdlcdev_tx_done(info);
else
info->input_signal_events.dcd_up++;
} else
info->input_signal_events.dcd_down++;
-#ifdef CONFIG_HDLC
- if (info->netcount)
- hdlc_set_carrier(status & SerialSignal_DCD, info->netdev);
+#if SYNCLINK_GENERIC_HDLC
+ if (info->netcount) {
+ if (status & SerialSignal_DCD)
+ netif_carrier_on(info->netdev);
+ else
+ netif_carrier_off(info->netdev);
+ }
#endif
}
if (status & MISCSTATUS_CTS_LATCHED)
* dev_id device ID supplied during interrupt registration
* regs interrupted processor context
*/
-static irqreturn_t synclinkmp_interrupt(int irq, void *dev_id,
- struct pt_regs *regs)
+static irqreturn_t synclinkmp_interrupt(int irq, void *dev_id)
{
SLMP_INFO * info;
unsigned char status, status0, status1=0;
return 0;
if (!info->tx_buf) {
- info->tx_buf = (unsigned char *)kmalloc(info->max_frame_size, GFP_KERNEL);
+ info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
if (!info->tx_buf) {
printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
__FILE__,__LINE__,info->device_name);
info->pending_bh = 0;
+ memset(&info->icount, 0, sizeof(info->icount));
+
/* program hardware for current parameters */
reset_port(info);
del_timer(&info->tx_timer);
del_timer(&info->status_timer);
- if (info->tx_buf) {
- kfree(info->tx_buf);
- info->tx_buf = NULL;
- }
+ kfree(info->tx_buf);
+ info->tx_buf = NULL;
spin_lock_irqsave(&info->lock,flags);
printk("%s(%d):%s get_params()\n",
__FILE__,__LINE__, info->device_name);
- COPY_TO_USER(err,user_icount, &info->icount, sizeof(struct mgsl_icount));
- if (err) {
- if ( debug_level >= DEBUG_LEVEL_INFO )
- printk( "%s(%d):%s get_stats() user buffer copy failed\n",
- __FILE__,__LINE__,info->device_name);
- return -EFAULT;
+ if (!user_icount) {
+ memset(&info->icount, 0, sizeof(info->icount));
+ } else {
+ COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
+ if (err)
+ return -EFAULT;
}
return 0;
return 0;
}
-static int map_status(int signals)
-{
- /* Map status bits to API event bits */
-
- return ((signals & SerialSignal_DSR) ? MgslEvent_DsrActive : MgslEvent_DsrInactive) +
- ((signals & SerialSignal_CTS) ? MgslEvent_CtsActive : MgslEvent_CtsInactive) +
- ((signals & SerialSignal_DCD) ? MgslEvent_DcdActive : MgslEvent_DcdInactive) +
- ((signals & SerialSignal_RI) ? MgslEvent_RiActive : MgslEvent_RiInactive);
-}
-
/* wait for specified event to occur
*/
static int wait_mgsl_event(SLMP_INFO * info, int __user *mask_ptr)
/* return immediately if state matches requested events */
get_signals(info);
- s = map_status(info->serial_signals);
+ s = info->serial_signals;
events = mask &
( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
void free_tmp_rx_buf(SLMP_INFO *info)
{
- if (info->tmp_rx_buf)
- kfree(info->tmp_rx_buf);
+ kfree(info->tmp_rx_buf);
info->tmp_rx_buf = NULL;
}
info->irq_level,
info->max_frame_size );
-#ifdef CONFIG_HDLC
+#if SYNCLINK_GENERIC_HDLC
hdlcdev_init(info);
#endif
}
*
* Return Value: pointer to SLMP_INFO if success, otherwise NULL
*/
-SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
+static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
{
SLMP_INFO *info;
- info = (SLMP_INFO *)kmalloc(sizeof(SLMP_INFO),
+ info = kmalloc(sizeof(SLMP_INFO),
GFP_KERNEL);
if (!info) {
} else {
memset(info, 0, sizeof(SLMP_INFO));
info->magic = MGSL_MAGIC;
- INIT_WORK(&info->task, bh_handler, info);
+ INIT_WORK(&info->task, bh_handler);
info->max_frame_size = 4096;
info->close_delay = 5*HZ/10;
info->closing_wait = 30*HZ;
info->phys_statctrl_base &= ~(PAGE_SIZE-1);
info->bus_type = MGSL_BUS_TYPE_PCI;
- info->irq_flags = SA_SHIRQ;
+ info->irq_flags = IRQF_SHARED;
init_timer(&info->tx_timer);
info->tx_timer.data = (unsigned long)info;
}
}
-static struct tty_operations ops = {
+static const struct tty_operations ops = {
.open = open,
.close = close,
.write = write,
/* release devices */
info = synclinkmp_device_list;
while(info) {
-#ifdef CONFIG_HDLC
+#if SYNCLINK_GENERIC_HDLC
hdlcdev_exit(info);
#endif
free_dma_bufs(info);
serial_driver->init_termios = tty_std_termios;
serial_driver->init_termios.c_cflag =
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ serial_driver->init_termios.c_ispeed = 9600;
+ serial_driver->init_termios.c_ospeed = 9600;
serial_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(serial_driver, &ops);
if ((rc = tty_register_driver(serial_driver)) < 0) {
/* MD2, Mode Register 2
*
* 07..02 Reserved, must be 0
- * 01..00 CNCT<1..0> Channel connection, 0=normal
+ * 01..00 CNCT<1..0> Channel connection, 00=normal 11=local loopback
*
* 0000 0000
*/
RegValue = 0x00;
+ if (info->params.loopback)
+ RegValue |= (BIT1 + BIT0);
write_reg(info, MD2, RegValue);
/* RXS, Receive clock source
* 07..05 Reserved, must be 0
* 04..00 RRC<4..0> Rx FIFO trigger active 0x00 = 1 byte
*/
- write_reg(info, TRC0, 0x00);
+ write_reg(info, RRC, 0x00);
/* TRC0 Transmit Ready Control 0
*
write_reg(info, IE2, info->ie2_value);
set_rate( info, info->params.data_rate * 16 );
-
- if (info->params.loopback)
- enable_loopback(info,1);
}
/* Program the SCA for HDLC communications.
info->icount.rxcrc++;
framesize = 0;
-#ifdef CONFIG_HDLC
+#if SYNCLINK_GENERIC_HDLC
{
struct net_device_stats *stats = hdlc_stats(info->netdev);
stats->rx_errors++;
index = 0;
}
-#ifdef CONFIG_HDLC
+#if SYNCLINK_GENERIC_HDLC
if (info->netcount)
hdlcdev_rx(info,info->tmp_rx_buf,framesize);
else
int register_test(SLMP_INFO *info)
{
static unsigned char testval[] = {0x00, 0xff, 0xaa, 0x55, 0x69, 0x96};
- static unsigned int count = sizeof(testval)/sizeof(unsigned char);
+ static unsigned int count = ARRAY_SIZE(testval);
unsigned int i;
int rc = TRUE;
unsigned long flags;
timeout=100;
while( timeout-- && !info->irq_occurred ) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(msecs_to_jiffies(10));
+ msleep_interruptible(10);
}
spin_lock_irqsave(&info->lock,flags);
/* initialize individual SCA device (2 ports)
*/
-int sca_init(SLMP_INFO *info)
+static int sca_init(SLMP_INFO *info)
{
/* set wait controller to single mem partition (low), no wait states */
write_reg(info, PABR0, 0); /* wait controller addr boundary 0 */
/* wait for receive complete */
/* Set a timeout for waiting for interrupt. */
for ( timeout = 100; timeout; --timeout ) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(msecs_to_jiffies(10));
+ msleep_interruptible(10);
if (rx_get_frame(info)) {
rc = TRUE;
{
static unsigned long testval[] = { 0x0, 0x55555555, 0xaaaaaaaa,
0x66666666, 0x99999999, 0xffffffff, 0x12345678 };
- unsigned long count = sizeof(testval)/sizeof(unsigned long);
+ unsigned long count = ARRAY_SIZE(testval);
unsigned long i;
unsigned long limit = SCA_MEM_SIZE/sizeof(unsigned long);
unsigned long * addr = (unsigned long *)info->memory_base;
spin_unlock_irqrestore(&info->lock,flags);
-#ifdef CONFIG_HDLC
+#if SYNCLINK_GENERIC_HDLC
if (info->netcount)
hdlcdev_tx_done(info);
else
git://git.onelab.eu / linux-2.6.git / blobdiff